JMS adapter error for FILE - XI - WebSphere MQ

Hi
We are facing an issue for a File to websphere MQ (5.3) implementation.
When we run the interface , it is giving an error in the run time work bench , Adapter error:
Exception caught by adapter framework: null
Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
Would also like to know if we need to mention Channel Name while configuring the adapter.
we have already placed the required driver for WebSphere MQ in XI server i.e com.ibm.mq.jar , com.ibm.mqjms.jar ,com.ibm.mqbind.jar

Hi John,
If you are working with IBM MQ 5.3, you would also need connection.jar deployed in the JMS driver.
You can mention the MQ channel name in the Receiver channel configuration in XI.
Ensure that the listener service on this channel is started.
More info at Re: XI--WebSphereMQ : Receiver Channel Inactive in MQ
regards,
Paparao

Similar Messages

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

JMS adapter error in MQSeries connection

Dear All,
i am getting the below error in Communicatin Channel Monitoring for my sender JMS adapter:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<IP_ADRESS>:<MQ_QUEUE_MANAGER>'
     at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
     at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1137)
     at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:799)
com.ibm.mq.MQException: Message catalog not found
     at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:171)
     at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:228)
i have written '<IP_ADRESS>:<MQ_QUEUE_MANAGER>' just to hide the data - i am getting <IP_ADRESS> as IP Adress i gave in JMS adapter and <MQ_QUEUE_MANAGER> as Queue Manager i gave in JMS adapter.
i am using the correct IP and 1414 port of MQSeries server. I have used a MQQueueManager defined in MQSeries. i have deployed JMS adapter properly in XI server.
So can anybody suggest what could be the possible reason of this error and how to rectify it. It is slightly urgent.
Thanks and Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Jan 29, 2008 2:32 PM
Edited by: RAJEEV GUPTA on Jan 29, 2008 2:39 PM

Hi,
Check this as well [http://publib.boulder.ibm.com/infocenter/wmqv7/v7r0/index.jsp?topic=%2Fcom.ibm.mq.csqzaw.doc%2Fjm35210_.htm]
Regards,
Venkata S Pagolu

Gardei@gardei-lab:~$ ./firefox/firefox XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so: libxul.so: cannot open shared object file: No such file or

Friends:
The latest Firefox won't launch. Here's what I get...
gardei@gardei-lab:~$ ./firefox/firefox
XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
Both .so files exist in ./firefox
Thanks. -- BG

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Receiver file adapter error for special char.

I am using MTB in my receiver file adapter. I am getting a special character from source system at end of the string. How to resolve this type of error u2013 please advice.
This error is not coming for every message.
Error message:
Column value xxxx Â too long - must stop, probably configuration error in file adapter
Thanks
Vick

Hi,
Itu2019s basically IDOC to file scenario.
This error is coming for name field.
What I am thinking at this stage to do changes in MTB by define parameters like (NameA.enclosureConversion)

Adapter engine showing error for file adapters

Hi,
I had configured communication channel using FTP . Because of which the Adapter engine is showing red in the component monitoring. It is saying one of the communicaion channel has error. But when I do a check in the CCs they doesn't show any error. I am getting the same error for NFS as well.
Has anyone come across such a kind of situation? Is it because of wrong entry in CC parameters or is it some BASIS configuration (patch) issue?
Could anyone of you give some guidance on this?
Thanks and Regards
Sanil

Sanil,
Just for testing purpose , delete ur comm.channel and check whether still u r facing the errors. If no errors then its bcoz of u comm.channel. Then we can narrow down the approach. Even after deleting the comm.chanel u get error then check all the channels across all clusters.
Note:After deleting the channel ,give some time and check the same.
Best regards,
raj.

JMS Adapter Error

Hi Experts,
               We are havingone problem in Sender JMS Adapter. From Sender (SeeBeyond) xml files are getting posted into Remote Queue in MQ, then it has been sent to Local Queue of MQ, and then finally from Local MQ Queue PI is picking up the data and sending it to SNC system.
               The problem lies in PI itself. While coming into PI, the value in the incoming payload where special characters(say, swedish character) are coming, are coming into PI as a garbage value. Whereas, in Sender (SeeBeyond), MQ and in PI Character set is ISO 8859_1. We have stopped the Sender JMS channel in PI, and checked the payload in MQ and in SeeBeyond, in both of the cases it's fine, only when coming into PI, data are getting corrupted.
                For this we have done some investigation like below,
1) We had changed the CCSID from 00819 (ISO 8859_1) to 1208 (UTF-8), 1200 (UTF 16), but no luck.
2) We had added th below mentioned modules into Sender JMS in Processing Sequence with the existing modules,
AF_Modules/MessageTransformBean                                              Local Enterprise Bean               ContentType
(ii) AF_Modules/TextCodepageConversionBean                                   Local Enterprise Bean               codepageConversion
But yet we are getting the same error in encoding in the payload while coming into PI.
Can anybody help me out with it, or probably let me know if I am missing something in my investigation.
//BR
Soumya

Hi Stefan,
             Sorry for the late reply. We were testing in different cases in PI, and here what I have found. In Sender JMS adapter we had put the module "AF_Modules/MessageTransformBean" with Module Key "Transform". And the configuration of this Module Key is as follows:-
Transform     Transform.ContentType      text/plain;charset="UTF-8"
And we changed the CCSID to 1208 (UTF-8). Now when we saw the payload in SXI_MONITOR in PI, we have found that the special character is being distorted whereas in View Sourse the payload is fine including special character also. That means there might be some display problem in SXI_MONITOR.
             Now, the Sender sends the data in XML iin ISO 8859-1nto MQ, MQ send the same as a string in PI, from PI it's going to SCM system (R/3, Supply Chain Management), where we could see ABAP.APPLICATION Error. We tested the interface in SCM system by running SPROXY and found that it's not able to recognise ISO 8859-1, since it's a Non-Unicode System, it will only understan UTF-8 and hence the error. Now manually we have changed the XML Header into UTF-8 and tested at SCM side, and this goes fine.
           So, we could see the changing of XML Header from ISO 8859-1 to UTF-8 would be running fine at receiver end (SCM). Since SCM is a Non-Unicode System, the XML header cannot be changed to UTF-8, is there any possibility in PI that we can change the XML Header from ISO 8859-1 to UTF-8.
           For your information, we are using Sender JMS adapter to receive the File from Sender and we are using Receiver XI adapter to post the file into SCM system.
What's your suggestion Stefan, how can we change the XML Header from ISO 8859-1 to UTF-8 in PI?
Many Thanks
Soumya

Sender JMS adapter error

Hi All,
I'm trying out a scenario which sends data from a Message Queue to SAP.
For this I need to configure JMS adapter in the sender side. here i am getting the error in the sender communication channel like below
Can not access because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing; ensure that JMS provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
Can any please help me on this?
Thanks
Govinda.

You need to deploy the MQ JMS library to your PI system first.
Please check sap note 1138877 for detail.
The numbers and names of the IBM libraries change depending on the MQSeries version you are using. Currently, we know the following names:
MQSeries 5.2
u2022     com.ibm.mq.jar
u2022     com.ibm.mqjms.jar
MQSeries 5.3
u2022     com.ibm.mq.jar
u2022     com.ibm.mqbind.jar
u2022     com.ibm.mqjms.jar
u2022     connector.jar (this file can also be retrieved from the SAP J2EE server directory)
MQSeries 6.0
u2022     CL3Export.jar
u2022     CL3Nonexport.jar
u2022     com.ibm.mq.jar
u2022     com.ibm.mqjms.jar
u2022     connector.jar
u2022     dhbcore.jar
u2022     rmm.jar

JMS Adapter: Error executing MQQueueConnectionFactory constructor

Hello exerts,
My Sender JMS Comm. Channel is throwing class not found error for com.ibm.mq.jms.MQQueueConnectionFactory. I set my JMS adapter logging level to DEBUG and this is what I got. It is crashing on Constructor. Doesn't anyone have any idea what might be wrong. We have an App server sitting in from on our PI box and they both have same jms libraries on them.
Thanks, Mayur
Caught com.sap.aii.adapter.jms.api.base.ConstructorInvocationException: Error executing constructor invocation:
{ConstructorInvocation
{className=com.ibm.mq.jms.MQQueueConnectionFactory,
invokeParams=[]
}: SAPClassNotFoundException: com.ibm.mq.jms.MQQueueConnectionFactory
at com.sap.aii.adapter.jms.core.common.InvokeUtils.invoke(InvokeUtils.java:284)

Hello Experts, just wanted to post an update of this issues. We were able to fix our issues by wipeing out all existing JMS libraries in our PI 7.1 environement and redeploying a fresh library (com.sap.aii.adapter.lib.sda).
Currently this library contain following JAR files.
lib/com.ibm.mq.jar
lib/com.imb.mqjms.jar
lib/connector.jar
lib/dhbcore.jar
lib/com.sap.aii.adapter.lib_api.jar
Thanks,
Mayur

JMS adapter fails to open IBM WebSphere MQ Manager V6 Remote Queue

Hello,
We are trying to connect to a Remote Queue with the SAP PI 7.0 SP9 JMS adapter to IBM WebSphere MQ V6 on Linux SLES9 x86_64.
We did deployed the JMS-adapter with the V6 native libaries on SAP PI.
In the Communication Channel we use the Adapter Type = JMS, Sender, Transport Protocol = WebSphereMQ(non-JMS).
The MQ Queue Manager is on the same server as SAP PI so we use localhost, Server Port, Queue Manager Name, Channel Name and JMS Queue Name
The <sid>adm user is a member of the mqm group.
When I check the RWB I see this fault message:
Error during channel initialization; exception trace: javax.jms.JMSException: <b>MQJMS2008: failed to open MQ Queue</b> at ...
and also
com.ibm.mq.MQException: <b>MQJE001: Completion Code 2, Reason 2045</b>
When we lookup the reason 2045 we get this explaination on MQ:
MQRC_OPTION_NOT_VALID_FOR_TYPE
We also have a type = Receiver Communication Channel on the same MQ Queue Manager that one is working fine.
Please advise!
Best regards,
Mike Laanen

Mike,
check whether the Queues are created and activated if it done. then check whether you have authorization for those queues.
Regards
Sreeram.G.Reddy

Adapter Module for File Adapter

I have a scenario where I have 2 related files (text file and a pdf file) for the message. I need to enhance the payload (content conversion from text file) with the size of the pdf file. I have developed a adapter module for this and it is working fine if there is 1 set of text and pdf file. But if there are more than 1 set of files, it is processing the first set and giving the below error for other files.
"Error: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback."
Regards
Yogesh

check this thread :
BaseTransactionRolledbackLocalException in custom adapter module
Exceptions in Recievr Communication Channel with Adapter Module

Sender File Adapter Error reading file

Hello!
I have a problem with reading a file using the FTP adapter.
I have configured everything according to the steps of weblog "FILE to JDBC Adapter using SAP XI 3.0" (/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30).
I know the sender FTP adapter can connect to the directory and file because:
1) it has complained about wrong format in the content conversion (has been fixed)
2) when there is no file for it there to pick up, the FTP flag in the adapter monitor is green
When I put a file in the specified directory I get the following error:
- 2006-06-21 09:52:23 CDT: Retry interval started. Length: 10.000 s
- 2006-06-21 09:52:23 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:20 CDT: Processing started
- 2006-06-21 09:52:13 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:10 CDT: Processing started
I also get the same error if I skip the content conversion and put a "ready" XML file there.
There should be no auth problems at all. Public server, and I can log on, get, put, delete etc. Also it can apparently read it since it can complain about the content format. Anyone seen this before?
Please advise. Thanks!
Nam

Hi Nam,
Is your User Id and User Id/Password is correct ?
Is connection mode is per file transfer in File Adapter configuration?
Also you can see the log from Visual Admin..
Regards,
Moorthy

JMS Adapter not picking file in PI7.0

Hello,
I am working jms to jms scenario on PI7.0 Service Pack13. file is not able to pick up sendar JMS Channel. I am using WebSphereMQ Transport Protocol. JMS drivers are installed. ports and protocals are correct.
I checked all parameters of JMS Adapter. no mistake in parameters. What is the problem. Please suggest as soon as possible.
Thanks
venkat

Hi San ,
Please checke the status of JMS communication channel. In Runtime work bench , U will get the adapter monitoring there if any activity happens it shows the event details .
I hope picking the file is initial event so you can get some idea with those event log for Communication channel .
Cheers,
Reddy

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

JMS adapter config for Sonic MQ Failing

Hi
I am trying a simple scenario using JMS adapter with Sonic MQ. The deployment is thru using SDM and Sonic_Client.jar ( JMS client library ) is deployed.
However activating the adapter fails to initialise it. In adapterframework , i get Vague messages saying "Receiver Channel. Details: null" which doesnt help to troubleshoot . The same happens for Sender channel as well.
Any pointers on how to troubleshoot wud be great ! log files !!??
Thanks
Saravana

Hi,
I had similar problem , when I started off with the same scenario. You need to delete the files under javax/jms and create a new .sda acrhive and load it thru SDM.
You should be all set .
Good Luck,
Narendra

JMS adapter error for FILE - XI - WebSphere MQ

Similar Messages

Maybe you are looking for