Sender File Adapter Error reading file

Hello!
I have a problem with reading a file using the FTP adapter.
I have configured everything according to the steps of weblog "FILE to JDBC Adapter using SAP XI 3.0" (/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30).
I know the sender FTP adapter can connect to the directory and file because:
1) it has complained about wrong format in the content conversion (has been fixed)
2) when there is no file for it there to pick up, the FTP flag in the adapter monitor is green
When I put a file in the specified directory I get the following error:
- 2006-06-21 09:52:23 CDT: Retry interval started. Length: 10.000 s
- 2006-06-21 09:52:23 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:20 CDT: Processing started
- 2006-06-21 09:52:13 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:10 CDT: Processing started
I also get the same error if I skip the content conversion and put a "ready" XML file there.
There should be no auth problems at all. Public server, and I can log on, get, put, delete etc. Also it can apparently read it since it can complain about the content format. Anyone seen this before?
Please advise. Thanks!
Nam

Hi Nam,
Is your User Id and User Id/Password is correct ?
Is connection mode is per file transfer in File Adapter configuration?
Also you can see the log from Visual Admin..
Regards,
Moorthy

Similar Messages

Sender Mail Adapter Error: exception caught during processing mail message;

HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.

HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

SAP PI Sender Mail Adapter error : Unexpected User response

Hello ,
I developed a scenario which requires Sender mail Adapter to connect a Third party system to PI, by going thro the links .
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
and PDFs in SDN.
When configured the sender mail adapter using POP Mail Server,faced the following error:gave the correct URL and Login credentials.
+" exception caught during processing mail message; java.io.IOException: unexpected user response; read -ERR Command is not valid in this state."+
Then used IMAP for the same mail server : error:
"exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state."
Tried with another Mail server :
"exception caught during processing mail message; java.net.ConnectException: Connection timed out".
Can you please help, what be the cause? how to rectify it?

Hi
There might be an connectivity issue from PI server to mail server. Please check with your BASIS to resolve the issue.,
Regards
Ramg

Sender mail adapter error

hi all,
I am working on mail-mail scenario where in when i monitor my sender CC it is displaying following error:
"exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Protocol Error: "Invalid string supplied for user name".
Please help me out in tracing the error as i am not able to trace it.
Sender CC configurations are as follows
>> Transport protocol - POP3.
>> Message Protocol - XIALL
>>URL - pop://pop.gmail.com
>>User - [email protected]
>>password - xxxxxx
Thanks and Regards,
Amit

hi ramesh,
I have changed user to amit.tsec and stopped and started the channel again and the job got scheduled and after the scheduling time it shows following error :
exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect
Please see if u have any idea on this error and can u give me the demo scenario on this sender mail adapter right from scratch i.e Data type.
Thanks and Regards,
Amit.

Sender SOAP adapter error 401

Hello All,
Here the scenario is SOAP -> XI -> SAP ECC.
When the webservice is seding the message I am getting error in Sender SOAP channel.
Message is not going to Integration Engine.
Its failing with 401Un Authorized in sender soap adapter channel.My sender soap channel is plain channel with no authentication check and certificated etc.When webservice is seding request to XI its sending wit some usernmae which was there on XI box.I am facing this issue in Quality Env. The same is working fine in Dev box.
Please give me the list of points that I need to check here.
Thanks,
Regards,
Naresh

Hi,
I am facing this issue in Quality Env. The same is working fine in Dev box.
Once the scenario is transported from Dev to QA the location where the Webservice is hosted will also change
Hence you will have to change the target URL .....just the HostName / IP address and the port for all the webservices (that you transported to QA)
Once you are in QA and with no change to the URL the sender (which I suppose is also in QA env) will be still trying to ping the same old Dev-URL....in such situation the sender is bound to get UnAuthorized error....
So one in all change the URL in your WebService to point to QA and then test....
Same logic applicable to QA --> PROD
Regards,
Abhishek.

Sender RFC adapter Error- request was null while trying to extract it.

Hi All,
I have a scenario running in Production(PI 7.0 system) where SAP ECC sends RFC request through sender RFC adapter. The scenario was working fine but now I am getting the below error in default trace and I couldn't see any error in communication channel monitoring.
java.lang.Exception: RfcServer[BAS_ECC_RFC_Snd]1[AFSenderD] request was <null> while trying to extract it.
I have gone through the below thread and performed a full cache refresh but it didn't help :
[NULL]
I have gone through SAP note:730870 and I couldn't get any help on this error. Can you please suggest your ideas to solve this issue.
Thanks & Regards,
Laawanya

Hi Lawanya,
Check you RFC and input data , whether the RFC call is able to get the data from ECC or not.
you can test the same RFC in ECC with input data and you can check whether the RFC in ECC is return the value or not.
I gues in your case the RFC in ECC is not return any data to PI.

SENDER JDBC ADAPTER ERROR

Hi all,
We are having an extrange problem. We are trying to read some info from an oracle Database, but we have always this error :
Error: SQLException during query 'SELECT * FROM XX': java.sql.SQLException: ORA-00942: table or view does not exist: SQLException: ORA-00942: table or view does not exist
And WE have checked it, and the table is there. To understand what is happening we try with another table and it works, we have compare both an has the same features.
Any Ideas?

Hi,
This is the format in which your Data polled from the DB wiill be created,
<i><resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset></i>
Resultset is to be replaced by your DT / Message Type name.
In the Sender JDBC adapter, give the Document Name as the Message Type name and the Document Namespace as the Namespace of your Message Type.
Is this how you have created the source structure?
Regards
Bhavesh

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

Sender mail adapter Error - UnknownHostException: hostname

Dear All Gurus,
PI Version : 7.31
Scenario : Mail to File
Below is the sender communication channel configured.
But in the Communication Channel Monitoring ( Runtime Workbench) I'm getting below error
exception caught during processing mail message; java.net.ConnectException: A remote host did not respond within the timeout period.

Hi Mkhail,
Thank you..
I have setup according to that...and BASIS confirmed that they are able to telnet with port 25. It was showing connected
Now I'm getting
exception caught during processing mail message; java.io.IOException: unexpected greeting response; read 220 ARALIYA.hayleys.net Microsoft ESMTP MAIL Service ready at Wed, 23 Apr 2014 14:11:33 +0530

Sender JMS adapter error

Hi All,
I'm trying out a scenario which sends data from a Message Queue to SAP.
For this I need to configure JMS adapter in the sender side. here i am getting the error in the sender communication channel like below
Can not access because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing; ensure that JMS provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
Can any please help me on this?
Thanks
Govinda.

You need to deploy the MQ JMS library to your PI system first.
Please check sap note 1138877 for detail.
The numbers and names of the IBM libraries change depending on the MQSeries version you are using. Currently, we know the following names:
MQSeries 5.2
u2022     com.ibm.mq.jar
u2022     com.ibm.mqjms.jar
MQSeries 5.3
u2022     com.ibm.mq.jar
u2022     com.ibm.mqbind.jar
u2022     com.ibm.mqjms.jar
u2022     connector.jar (this file can also be retrieved from the SAP J2EE server directory)
MQSeries 6.0
u2022     CL3Export.jar
u2022     CL3Nonexport.jar
u2022     com.ibm.mq.jar
u2022     com.ibm.mqjms.jar
u2022     connector.jar
u2022     dhbcore.jar
u2022     rmm.jar

PI 7.1 IMAP email Adapter Error reading large amounts of emails

Hi,
are there any known problems with the email-Adapter (Sender), reading IMAP MS Exchange Server?
We have an email adapter reading the MS Exchange Server Mail Account once per Minute and in the mail account are about 4.000 unread email (1KB each) .
After 2000 emails, the adapter stops working and throws only exceptions.
Any idea?
Thanks
hs

Hi Holger,
i made a few tests at that time, and there was no specific scenario which re-produced this error.
In some tests i was able to process more than 3000 emails before the error occured, next time only 2000.
And this only occured when the inbox had a huge amount of emails. if i moved, lets say 1000 emails to a temporary folder,
processed 1000 and then moved the 1000 back to the inbox, there was no problem. Now i'm polling every minute and i'm
not receiving 2000 emails in a minute, so i'm not having this issue anymore. it only happend when we stopped the
sender channel for a while and a lot of emails were queuing up in the inbox. I don't think that there are any MS Exchange settings that need to be changed and when we spoke to Support that time, they refered to the Note i mentioned earlier.
Maybe there is still a problem in the mail adapter itself..
regards,
Daniel

Sender Soap Adapter - error

Hi,
I am testing SOAP to RFC Scenario in Quality landscape. I am getting the following error
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>ModuleUnknownException</code>
                         <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04_16_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#2 $)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope>
Done CPACache refresh 2 times, Done java stack restart, Checked whether URL is correct or not. Almost all checks are done. Still error exists. Any help on this greatly appreciated.
Regards,
Daniel.LA

Hi Daniel,
                There could be error in places
     a) there could be a error in the payload of this message where Receiver agreement wasnt sepcified.
     b) Check in the configuration for this particular Combination if everything rightly defined or not(check CC, Recevier agreement, Serice .etc)............
Solution could be that if there is an error in Conifguration then
1) Make the approperiate changes
2) Activate all the objects
3) Refresh cache
Reward with points if helpful
Regards
Sai Ganesh

SFTP   Sender adapter error

HI All
    I am   facing a error in sender SFTP   adapter
Error: Current transaction is marked for rollback: Trace of setRollbackOnly() invocation. (Software version: 3.0.17)

For the Roll back error plz chk the below points.
1. Check the module parameters.
2. Make sure the sender agreement doesnt have any * 's.
Ex: The SA should not be like : | BS | SI_test_oa | * | *
      SA should be like BS | SI_test_oa | |
3. If the input file has special chanracters , use the encoding .
If the above doesnt work, try to create a new communication channel and test it.
We also faced this error toomany times in the sender CC for sFTP advatco adapter.
Thanks,
Soumya.

Sender mail adapter : no messages and no error log

Hello,
I have configured a sender mail adapter to read mails from the inbox. I have used IMAP protocol. URL is specified as imap://EMHBSEXM01/Inbox. User name and password is also specified properly. I have kept poll interval to 1 minute. Messages in the inbox are in unread status. But the mail is not getting processed. I do not see anything after 1 minute. I tried using generate fetch report flag. But even then it does not create any message in SXMB_MONI. I checked runtime workbench for Mail adapter but I do not see any message for the same. Is there something that I am missing?
Thanks,
Dev

Hi All,
I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
Does anyone have any idea what this error is?
Thanks in advance,
Devendra

Sender Mail Adapter - Incoming Mail Validation

Hi Group,
I am using sender mail Adapter to read the incoming mails from mail server,I have couple of questions:
1.How we can configure adapter to read the mails from particular user.
2.after reading the mail I am only taking subject line in to the mapping,is there any way we can validate whether the incoming
subject line is in the right define form or not.
3.how we can archive once after reading mail.
4.Is there any performance affect on settling polling interval.
Could you please help .
Regards,
Rajiv

Hi,
Refer Michael's steps on similar requirement.
Picking mails from a particular sender using mail sender adapter
Regards
Krish

Sender File Adapter Error reading file

Similar Messages

Maybe you are looking for