JMS Adapter - Queue Message Loss

Hi Folks,
I am working on MQ - to - File Scenario, working fine. But some Cases message is fail in SMQ1 & SMQ2, I am not able to re-process that message because of that messages are System Error.
So My Problem was, Once JMS Adapter is pick the Data from MQ, no more data in MQ, some cases message is fail, We can't re-process that message, So i dont want to lose that data.
How can i recover that MQ Data...
Thanks for help,

Hi S R,
What is the error detail in SMQ1,SMQ2?
Did you try to reprocess them from execute luws? try to change the status to recorded if possible.then execute again.
thanks

Similar Messages

Mediator Resequencer,JMS Adapter: queue consumers increase from PS2 to PS4

Hi,
We have an environment using SOA Suite and Mediator Resequencer, it is using a FIFO approach. It has been running fine in SOA Suite version 11.1.1.3.
We are using a JMS Adapter, consuming the messages from the UDD queues as we have a SOA cluster of two managed servers.
Well we are now doing some test for upgrading to PS4 (11.1.15) and we have noticed some differences after the upgrade in terms of # consumers on the UDD queues.
In 11.1.1.3 eache member of the UDD was showing just 1 consumer. Looks like this is the right configuration when using and mediator resequencer FIFO approach, as they say you need to have a single-threaded approach to avoid unpredictible result.
After upgrade that, we have noticed that in 11.1.1.5 each UDD member shows 2 consumers, we have not changed anything, we just follow the upgrade guide to do that. To be honest we are not sure wheter it is a problem or not.
Can anybody advise about that? If it is an issue, How and where can configure it to get back to 1 consumer connected to UDD member?
Thanks a lot!

The Bridge is configured to use the MQ CF and destination directly without the foreign JMS wrapper. Does this make any difference to the bridge's transactional behaviour with MQ?
Even with the foreign jms wrapper, the local jndi name of the MQ CF is still mapped to com.ibm.mq.jms.MQXAQueueConnectionFactory class. So I think there is no wrapper classes are used from foreign JMS perspective. But if a bridge is configured to lookup local jndi, does it add any wrapper classes which handles the XA interactions with MQ in a different way ?
I am trying to see if introducing a foreign server resolves the problem. Not sure if its worth to take this path.
Thanks in advance.
Regards,
Atheek

JMS Adapter Maximum Message Size Restriction and Impact

Hi ,
We have business requirements,where the Maximum message size that needs
to be sent or received from around 25 to 30MB usig JMS XI channels.
But, "Note 856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)"
specifies as below,
2.12)What are the message size restrictions in 640/700 release and also
710 releases?
Answer: The maximum message size for 640/700 releases is "10MB"
Please let us know,
1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
regards,
Amit

1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek.

PI JMS Adapter MQ Message Format

Hi,
I know that if you change the target client in the JMS adapter properties il will change the message format for MQSTR (Websphere MQ Non-JMS) or MQRFH2 (JMS-Compliant).
But is there a way to force the MQ Message format to NONE or an empty string? The MQSTR is causing some unwanted conversion in legacy systems.
PI 7.1 EHP1.
Thanks,
Martin

Hi Martin - I relize you've already answered, but as an fyi, my somewhat related requirement was to have the mqmd.format=MQIMS, instead of the value MQSTR that PI seems to default to.
I was able to achieve this by
(1) setting that Module JMSMessageType=bytes parm like you did, and
(2) set an additional parameter entry (i.e. on your 'Advanced' tab) of
JMS.Message.method.setStringProperty java.lang.String JMS_IBM_Format, java.lang.String MQIMS
(I think you need MQ7 libraries for this).
Keith

Transactional Session JMS Adapter

Hi,
i'm using a JMS sender and receiver adapter. Everything works but i can't understand if it'could be better to use a Transactional Session in Jms setting. I've found a lot of documentation about jms adapter configuration, but not so much information about Transactional Session field.
Could somebody explain me something more??
When can i use transactional session?
Thanks a lot.
Bye, bye..

Hi,
The Transactional Session in JMS is used to persist the messages or may get roll back if in case of failure.
The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK. The messages will be processed in Queue i.e WebSphere MQ series, SonicMQ and others...
Suppose in case of failure of the connectivity the messages maintained in queue may lost. That would be serious problem if the queue is maintained with the messages having important data from production landscape.
If you enable a transactional JMS session, set the indicator. The processing of a message will be safe, a transactional session ends either with a COMMIT, or in the case of an error, with a ROLLBACK. So there will not be any chance of loss of the messages in queue.
If the session is not transactional, there can be duplicates or lost messages.
I hope now it will pretty clear to you the purpose of Transactional session.
Thanks
Swarup

Module in Receiver JMS Adapter

I am using the following Modules in one of receiver JMS adapter. What is the function of each Bean that we are using here ??
Any links in this regard is appreciated
1-AF_Modules/RequestOnewayBean-Local Enterprise Bean-0
2-SAP XI JMS Adapter/ConvertMessageToBinary-Local Enterprise Bean-convert_XI2Bin
3-SAP XI JMS Adapter/SendBinarytoXIJMSService-Local Enterprise Bean-exit
4-AF_Modules/WaitResponseBean-Local Enterprise Bean-1
thanks
kumar

Hi,
The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
This link will help you...
JMS adapter
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5393. [original link is broken] [original link is broken] [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
ref this weblog by william Li
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
syn-asyn bridge( with out bpm)
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
similary asyn-syn bridge
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
also refer
http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure

Sender/receiver JMS Adapter XML Format

What is the XML format do we need to pass to Sender/receiver JMS adapter to get it processed. Do we have any specific format like JDBC adapter.
Thanks,
Sam

Hi,
1) The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK
2) Before to use the JMS adapter we must first install the relevant JMS driver.
The required Java libraries are product-specific The provider setting specifications are the same for the receiver and sender adapter
3)We need to configure the JMS adapter in the configuration part of the Integration Builder/PCK
4) The Sender JMS adapter is configured to send JMS messages to the Integration Engine or the PCK.
5)The Receiver JMS adapter is configured to be able to convert XI messages from the Integration Server or the PCK into JMS messages
Please go through this link
1)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
2)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm - Configuring the Sender JMS Adapter
3)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
Configuring the Receiver JMS Adapter
4)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS-Provider-Specific Settings
5)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS Adapter Modules
6)http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/frameset.htm -
Async/Sync and Sync/Async Bridge in the JMS Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Thanks,
Soumya.

Scenarios using Sender JMS adapter and Reciver JMS adapter

Hi All,
I am not able to find god step by step blog on senderJMS adapter and Receiver JMS adapter.
also please explain when we use JMS.What does a messng system means?please provide some examples.
Thanks and regards

Hi Goyal,
Messaging System :
Messaging system allows separate, uncoupled applications to reliably communicate asynchronously. The messaging system architecture generally replaces the client/server model with a peer-to-peer relationship between individual components, where each peer can send and receive messages to and from other peers.
Go thru this you will get better idea :
http://java.sun.com/developer/technicalArticles/Networking/messaging/
JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
regards
Ganga

JMS adapter transaction. Rollback message to queue.

Hi all !
A have question about jms adapter transaction. My composite application has 3 steps : JMS adapter (listener), mediator, WS adapter. JMS adapter listen queue push message to mediator, mediator invoke web service. If ws not available (server down), mediator try recovery 5 times. After 5 times, reject message from queue. I wont rollback message to queue. I saw examples with JMS + BPEL, but it not help me. Anybody can help me.

Hi,
You don’t need to catch a mediator fault – you can let it rollback to the JMS Queue and let the Queue do the retries.
To get the retries working, log in to the weblogic console and navigate to JMS Modules -> Your Module -> Your Queue -> Configuration -> Delivery Failure
Here you will find options for Redelivery Limit. Set this to the number of retries you need.
Then navigate to the connection factory you want and set the redelivery delay.
This should get your desired behaviour, but once the message has failed it will be discarded. If you prefer to put it on an error queue you can create an error queue, and in the original queue’s, goto Delivery Failure, change the expireation policy and set the Error Destination to be your error queue.
Hope that helps!
Robert

How to send message to a queue using JMS adapter

Hi,
I need to send messages to the default queue(demoQueue) available in the server using a JMS adapter in a BPEL process.
I tried doing the same by using an invoke activity that invokes the JMS adapter service to send the message to the queue. I deployed this process in the server and gave an input to send it to the queue. The prcoess executed without any errors in the BPEL console.
I am also using Hermes v1.0 to monitor the queue but it says that it dint receive any messages in the queue to read.
I am sorry that i have restrictions from the client that i can't post the code here. Please let me know if anyone has got any solution or if you know any other way of doing the same.
Thank you
Message was edited by: prince
the_prince

You can use the following procedure :
DBMS_AQ.ENQUEUE (
queue_name IN VARCHAR2,
enqueue_options IN enqueue_options_t,
message_properties IN message_properties_t,
payload IN "<ADT_1>",
msgid OUT RAW);

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
If you want to connect to the AQ direct then use the AQ adapter.
this blog may be of some help understand the configuration
http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
cheers
James

JMS Sender Adapter Sharing Message Queue

Hi all.
I´ve some scenarios (request/replay) with JMS Adapter and MQ Series. All of them working againts the same queues.
In the sender side, each sender channel for each scenario must read from the same queue with a message selectors. The problem is that I have just one User to access the queue but the sender channel opens the connection in exclusive mode. So I can´t activate all sender channels at the same time (shared mode) without error.
Is it possible having more than one sender channel againts the same queue, with the same user?
Thanks a lot,
Gari.

Sorry, it's solved. The queue was not well defined in MQ Series so I couldn't connect more than one channel to it.
Thanks.
Gari.

MDB,MDB container or JMS adapter stops processing messages from JMS queue

Hi guys,
we have created a component using Enterprise Java Beans, let's say a product catalog, deployed it on a Glassfish v2 instance, and connected it to a legacy system using JMS and Sun MQ v4.1 as messaging system. The catalog component thus starts one MDB that listens on a JMS queue, let's say a queue named catalog_business_events_in, and waits for incoming messages, i.e. in our case update events. The problem is, that in general this approach works well, but sometimes the MDBs/JMS adapter stops for some reason fetching and processing messages from the JMS queue. We don't know why - no exceptions, etc.. Seems to be a Glassfish EJB container, JMS adapter or Sun MQ configuration issue. It seems to be that our component is not the problem.
The messages are compressed/uncompressed by Sun MQ automatically. We actually have 2 Sun MQ instances in clustered mode running to have some kind of failover - no HA cluster, yet. Sun MQ instances are accessed from Glassfish instances running in different Glassfish clusters - so we have a dedicated Sun MQ cluster not a Sun MQ instance per Glassfish instance. Each Glassfish instance is configured such that it knows both Sun MQ instances to allow automatic failover.
Has someone an idea, why the MDBs/ MDB container/ JMS adapter - stops processing messages? We are kind of puzzled as it happens more often now and apparently when traffic is (very) low not high!
Thanks for your help.
Cheers,
Martin
Edited by: east1979 on Jan 13, 2009 8:06 AM

Hi Manoj,
I have a very similar if not identical issue,
Error while running realtime jobs that read from JMS tables via JMS MQ adapter:
15/11/12 09:10:08 JMS GET OPERATION ERROR : TIMEOUT.UNABLE TO RECEIVE RESPONSE FROM THE INVOKED DATA SERVICES SERVICE.ADAPTER OPERA
TION TO CONTINUE.
15/11/12 09:10:15 Communication Error. See real time job log for details.
Dump available:
https://sapmats.wdf.sap.corp/download/download.cgi?id=5C0KZAHA3RSXBJW3ABLMUUT2P5UUKWO2TM3EJDM5W2HGDZUDID
Version of DS:14.0.3.273
Any comments?
Thansk and kind Regards,
Kenneth

How to read Java Object message from JMS Queue using JMS Adapter .

Dear All,
In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message .
I am able to read the Message successfully thru JMS Adapter but in SXMB_MONI it is not showing any payload .
I also went in Message monitoring but i am getting this type of message in Sender JMS Adapter in Audit Log.
JMS Message ID XXXXX Message Type Null unknown.Payload can not be read and will be empty.
JMS Message ID XXXXX Payload Empty can not read.
Please Help.
Lateef

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Push different type of messages to JMS Queue using JMS Adapter

Platform: Oracle SOA 11g. JMS Adapter.
I got to push different types of messages as string to same queue. JMS Adapter requires schema to push a message to a queue. Since messages are of different types, how can I push them into queue. I tried to use singleString schema. Result is that actual message gets wrapped into <singleString> root element which is not the required result.
Any hints or links shall be appreciated.

Thanks fo ryour reply and help. I appreciate that.
Wrapping of original message in <singleString> element is done by JMS Adapter as the very last activity/setting. I am not composing/transforming message into final shape with singleString through transformation.
Once message is with JMS adapted on one end, it is in Queue on the other end. No control.
Since consuming end is not in my control and requires the actual message in Text format, I need to have the message target queue in Text format.
If I select the Opaque schema, following error message is thrown.
<bpelFault><faultType>0</faultType><mismatchedAssignmentFailure xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"><part name="summary"><summary>Mismatch Assign. cannot set a nonmessage value to a message-based variable. An attempt to assign a nonmessage value to a message-based variable failed. Verify the BPEL source for invalid assign activities.< /summary></part></mismatchedAssignmentFailure></bpelFault>

JMS Adapter - Queue Message Loss

Similar Messages

Maybe you are looking for