JMS configuration problem log file
Hello,
My purpose is to send xml data from MQSeries to BW using XI. MQSereies is installed in XI server. For thah I am trying to configure JMS adpter for MQSeries in XI. I have successfully deployed the necessary external drivers using SDM. I have configured the sender channel with the following parameters.
Adapter type: JMS
Transport Protocol :WEBsphereMQ(non-JMS)
Message protocol :JMS1.x
Queue connection factory java class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class: com.ibm.mq.jms.MQQueue
IP address: IP address of XI system.
Port: 1414
Queue manager name : MQ-manager-name_XI-system-name
Channel Name : reciever-channel-name_XI-system-name
JMS queue: postcard
Charecter set ID:
Transport/networkprotocol: TCP/IP
JMS-Compliant : WebsphereMQ(non-JMS)
But when I check it in adapter monitor JMS is shown as red.
<b>In default trace file I am getting the following error</b>
javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'SYSTEMNAME:QUEUEMANAGERNAME_SYSTEMNAME'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1450)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:960)
at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:159)
at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueueConnectionFactory.java:215)
at com.sap.aii.af.service.jms.WorkerJMSReceiver.init(WorkerJMSReceiver.java:283)
at com.sap.aii.af.service.jms.WorkerHandlerImpl.run(WorkerHandlerImpl.java:325)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
<b>I also get the following warning</b>
Warning : Catching java.lang.NullPointerException
at com.sap.aii.af.service.jms.WorkerJMSReceiver.start(WorkerJMSReceiver.java:584)
at com.sap.aii.af.service.jms.WorkerHandlerImpl.run(WorkerHandlerImpl.java:335)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Can any one tell what could be the problem.
Regards,
Amith
Try the following :
1. Check if by any chance more than 1 Queue manager listeners have port number as 1414. Make sure all run on unique ports.
2. Instead of IP addreess in the adapter config., try using hostname.
3. Also check the website www.mqseries.net for this error
Similar Messages
-
How to configure weblogic log file?
HI
How do i configure Weblogic server log file to log weblogic related information as well as my application?
I need to maintain one log file for weblogic and my application.
Thanks,Then glassfish instance is either not configured yet or installed somewhere else. Try looking under your user's home directory like C:\Documents and Settings\<username>\Application Data\glassfish\domains\domain1\logs
-
Log Configurator - Increase log file size from 10 mb to 20 mb
Hi All,
We have implemented custom logging in our implementation using custom Log Destinations and Locations.
The log destination (inside log configurator service) we were using earlier had size of 10 mb for each file and the file count was 5.
Now, as the log files are getting archived very soon we changed the log file size to 20 mb and file count as 5.
After restarting server, the log viewer in NWA and within Visual Admin does not show updated logs. We have monitored this for sometime now so that new logs are written to the log files still the situation is same.
Strangely, logs are getting updated at OS level in the log files but the entries are nto shown on Log Viewer in NWA or Visual Admin.
Are there any restrictions on the log file size or any other parameter needs to be changed to make this work ?
Looking forward for your inputs and suggestions.
Regards,
PrasannaHi All,
We have implemented custom logging in our implementation using custom Log Destinations and Locations.
The log destination (inside log configurator service) we were using earlier had size of 10 mb for each file and the file count was 5.
Now, as the log files are getting archived very soon we changed the log file size to 20 mb and file count as 5.
After restarting server, the log viewer in NWA and within Visual Admin does not show updated logs. We have monitored this for sometime now so that new logs are written to the log files still the situation is same.
Strangely, logs are getting updated at OS level in the log files but the entries are nto shown on Log Viewer in NWA or Visual Admin.
Are there any restrictions on the log file size or any other parameter needs to be changed to make this work ?
Looking forward for your inputs and suggestions.
Regards,
Prasanna -
Configure the log file for my app?
How do I set the directory that my app will store logfiles in using Java Web Start and slf4j?
I am at something of a loss here and don't know where to start.Executed "sp_helpbdb tempdb" and the results are
name
db_size owner
dbid created
tempdb
8720.75MB sa
2 Mar 14 2014
status
compatability_level
Status=Inline,Updateability=READ_WRITE, UserACC....
80
Name
field filename
filegroup size
maxsize growth
uage
tempdev
1 F:\
PRIMARY 8929280KB
unlimited 10%
data only templog
2 F:\ NULL
768kb Unlimited
10% log only
Just now restarted the machine and took executed "sp_helpbdb tempdb"
command
There are tags which related to 'PO' -
How to configure log files in SQL 2012?
I'm installing a SharePoint Solution and using Microsoft SQL 2012 and I have limited knowledge in installing SQL. I simply run the wizard and create the DB for SharePoint.
Is there any links/materials available demonstrating how to correctly configure the log files step by step in a specific partition during the SQL installation for SharePoint 2013?
thanks,Hello,
SQL Server database log files benefit from RAID 1 and RAID 10 configurations. RAID 10 is recommended for both data files and log files.
To control de grow of transaction log files, please backup them regularly. The following article may explain you in detail why:
http://technet.microsoft.com/en-us/library/ms175495.aspx
Monitor the growth of log files using Performance Monitor and the SQLServer:Databases --> Log Growths counter. Adjust the size of log files until Log Growths
is constantly zero.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
pls help me to fix this problem.
log file...
2014-02-24 14:04:20.396 [1192:14d4]: restore library built Jan 7 2014 at 02:02:33
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: iTunes 11.1.4.62
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Software payload version: 10B500
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Using iTunes state machine
2014-02-24 14:12:16.573 [1192:10d0]: iTunes: Specifying UOI boot image
2014-02-24 14:12:16.774 [1192:10d0]: requested restore behavior: Erase
2014-02-24 14:12:16.774 [1192:10d0]: requested variant: Erase
2014-02-24 14:12:16.997 [1192:10d0]: *** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
2014-02-24 14:12:17.390 [1192:10d0]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 063BE060 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 063BFF08 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 063BECC0 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 063BFDE8 [720A907C]>{length = 20, capacity = 20, bytes = 0x947ce636269ab8f999739b5a72d820c70102912a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 063BEC78 [720A907C]>{length = 20, capacity = 20, bytes = 0x86aa6a33d416b8183226d0b9188df879c0666e8a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 063BF890 [720A907C]>{length = 20, capacity = 20, bytes = 0xd1534e338ae80b9b4addae3c77a83a6186fe75ab}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 063BFE78 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 063BF338 [720A907C]>{length = 20, capacity = 20, bytes = 0x79be5d2f2f7054aa2d7bdd5b66e3a0eca07a725b}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 063BFE30 [720A907C]>{length = 20, capacity = 20, bytes = 0x1abed33b398f978c681b346ea167eb26eaf3b38e}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 063BDF88 [720A907C]>{length = 20, capacity = 20, bytes = 0x21abcad73c393fb9d197b34403d52ec82643ffc4}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 063BEC30 [720A907C]>{length = 20, capacity = 20, bytes = 0xfa0dc3003aeb828feda55a4ffb8027d10f054bce}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 063BFDA0 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 063BFD58 [720A907C]>{length = 20, capacity = 20, bytes = 0xc504724a963b954e32478d6920311a32baca15b9}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 063BFC38 [720A907C]>{length = 20, capacity = 20, bytes = 0x808a3980c646bd6d87921c9dba79c54a7759395a}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 063BED08 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 063BF578 [720A907C]>{length = 20, capacity = 20, bytes = 0x62d392da7901734968084e882ab8d687bc917be8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 063BFBA8 [720A907C]>{length = 20, capacity = 20, bytes = 0x059a392a0e7dccbfdc2f918cd59f4f5b4b140df8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 063BF410 [720A907C]>{length = 20, capacity = 20, bytes = 0x421d229710239b268c3a2544a4fb161a3d6288aa}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 063BF3C8 [720A907C]>{length = 20, capacity = 20, bytes = 0xa01b8483c6d2f2355569951d0e72df454f4432a7}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 063C3700 [720A907C]>{length = 20, capacity = 20, bytes = 0x9738ff132ae5b77833acdf2aa72af1558c4734d2}
2014-02-24 14:12:22.431 [1192:10d0]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2014-02-24 14:12:22.685 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-request.plist
2014-02-24 14:12:24.350 [1192:10d0]: amai: tss_submit_job: HttpQueryInfo returned 200
2014-02-24 14:12:25.032 [1192:10d0]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2014-02-24 14:12:25.078 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-response.plist
2014-02-24 14:12:26.597 [1192:10d0]: amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
2014-02-24 14:12:27.466 [1192:3a4]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:27.467 [1192:3a4]: iBoot build-style = RELEASE
2014-02-24 14:12:27.468 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.469 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.471 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.472 [1192:3a4]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:27.473 [1192:3a4]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:27.474 [1192:3a4]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:27.475 [1192:3a4]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:27.476 [1192:3a4]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:27.477 [1192:3a4]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:27.477 [1192:3a4]: radio-error not set
2014-02-24 14:12:27.478 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.480 [1192:3a4]: <Recovery Mode Device 025E0430>: production fused device
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.482 [1192:3a4]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:27.482 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 4 progress -1
2014-02-24 14:12:30.448 [1192:3a4]: bootstrapping restore with iBEC
2014-02-24 14:12:30.449 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:30.463 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 31 progress -1
2014-02-24 14:12:31.463 [1192:3a4]: <Recovery Mode Device 025E0430>: Recovery mode succeeded
2014-02-24 14:12:37.516 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:12:37.521 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:37.590 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.622 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.651 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.664 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.664 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, new device
2014-02-24 14:12:37.665 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:37.692 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.716 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.739 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 1
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 1, connected: 0
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:12:37.870 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.870 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.877 [1192:1558]: Recovery mode device connected
2014-02-24 14:12:37.877 [1192:1558]: Found new device.
2014-02-24 14:12:37.880 [1192:1450]: _AMRecoveryModeDeviceFinalize: 025E0430
2014-02-24 14:12:37.881 [1192:14d4]: iTunes: SCEP 2
2014-02-24 14:12:37.969 [1192:544]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:37.970 [1192:544]: iBoot build-style = RELEASE
2014-02-24 14:12:37.970 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 44 progress -1
2014-02-24 14:12:37.970 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:37.970 [1192:544]: requested variant: Erase
2014-02-24 14:12:37.971 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:12:38.675 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.677 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:38.677 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:38.677 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:38.677 [1192:544]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:38.677 [1192:544]: radio-error not set
2014-02-24 14:12:38.677 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.678 [1192:544]: <Recovery Mode Device 025DFDD0>: production fused device
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.679 [1192:544]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:38.679 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 4 progress -1
2014-02-24 14:12:41.655 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:41.656 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:41.656 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:41.656 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.659 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.661 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.664 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.666 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 42 progress -1
2014-02-24 14:12:41.666 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.669 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:42.160 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:12:42.163 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:42.231 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.285 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.340 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.364 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:42.367 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:42.432 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.487 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.541 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.566 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:42.706 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:42.706 [1192:544]: command device request for 'getenv ramdisk-size' failed: 2008
2014-02-24 14:12:42.707 [1192:544]: Unable to query iBoot ramdisk-size. Libusbrestore error : 67108864
2014-02-24 14:12:42.707 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 5 progress -1
2014-02-24 14:12:43.100 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:43.100 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:43.100 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:43.102 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:43.102 [1192:544]: command device request for 'getenv ramdisk-delay' failed: 2008
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.187 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.227 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.260 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.272 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.389 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.412 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.435 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.446 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:45.138 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 6 progress -1
2014-02-24 14:12:46.148 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 7 progress -1
2014-02-24 14:12:46.482 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 8 progress -1
2014-02-24 14:12:46.483 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:46.484 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:46.484 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 9 progress -1
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: Recovery mode succeeded
2014-02-24 14:12:48.195 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:48.200 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.201 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 1
2014-02-24 14:12:48.201 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:48.201 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:48.210 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.211 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.214 [1192:1558]: _AMRecoveryModeDeviceFinalize: 025DFDD0
2014-02-24 14:12:48.382 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:13:00.982 [1192:cfc]: Mux version 3 event happened
2014-02-24 14:13:00.982 [1192:cfc]: Passing control to mux version 2 handler
2014-02-24 14:13:00.983 [1192:cfc]: Muxed mode device connected
2014-02-24 14:13:01.049 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.055 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.266 [1192:1664]: received kAMDeviceAttached action, device id E80CE514C875BC07 (0641AB88), AFC error 0XE8000028
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Restore-mode device appeared, device 0641AB88
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2014-02-24 14:13:01.267 [1192:1664]: <Restore Device 06F59780>: operation 3 progress -1
2014-02-24 14:13:01.272 [1192:1664]: <Restore Device 06F59780>: operation 4 progress -1
2014-02-24 14:13:01.297 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.300 [1192:1664]: Supports value queries: 1
2014-02-24 14:13:01.314 [1192:e7c]: value query for 'SerialNumber' returned 'C3VDMTBQDCP9'
2014-02-24 14:13:01.314 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.321 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.326 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.336 [1192:1154]: Found new device
2014-02-24 14:13:01.368 [1192:f44]: <Restore Device 06F59780>: operation 44 progress -1
2014-02-24 14:13:01.368 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:01.368 [1192:f44]: requested variant: Erase
2014-02-24 14:13:01.372 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:13:02.147 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.149 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.166 [1192:f44]: fixed TcpWindowSize (65535) can cause restore failure if too large
2014-02-24 14:13:02.238 [1192:f44]: device did not return saved USB log
2014-02-24 14:13:02.238 [1192:f44]: device had saved panic logs: panic(cpu 0 caller 0x80632111): "partition scheme present; however, no partition devices were created"@/SourceCache/IOFlashStorage/IOFlashStorage-558.4/IOFlashPartitionSchem e.cpp:267
Debugger message: panic
OS version: 9A405
Kernel version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:33:58 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8930X
iBoot version: iBoot-1219.43.32
secure boot?: YES
Paniclog version: 1
Epoch Time: sec usec
Boot : 0x526e9493 0x00000000
Sleep : 0x00000000 0x00000000
Wake : 0x00000000 0x00000000
Calendar: 0x526e94a6 0x000e2944
Task 0xc0562d20: 2451 pages, 81 threads: pid 0: kernel_task
thread 0xc064b230
kernel backtrace: cb643e2c
lr: 0x8007cc6b fp: 0xcb643e58
lr: 0x8007d26f fp: 0xcb643e88
lr: 0x80016391 fp: 0xcb643ea0
lr: 0x80632111 fp: 0xcb643ecc
lr: 0x806323b9 fp: 0xcb643ee0
lr: 0x8020dd3b fp: 0xcb643f18
lr: 0x8020db31 fp: 0xcb643f5c
lr: 0x8020e509 fp: 0xcb643f80
lr: 0x8020e2e5 fp: 0xcb643fa8
lr: 0x8007b37c fp: 0x00000000
Task 0xc0562ac0: 283 pages, 3 threads: pid 1: launchd
Task 0xc0562860: 515 pages, 1 threads: pid 2: launchctl
Task 0xc0562600: 690 pages, 1 threads: pid 3: restored_externa
Task 0xc05623a0: 3000 pages, 2 threads: pid 4: restored_externa
2014-02-24 14:13:02.248 [1192:f44]: connected to service com.apple.mobile.restored
2014-02-24 14:13:02.248 [1192:f44]: using protocol version 12
2014-02-24 14:13:02.256 [1192:f44]: unable to open device_map.txt: No such file or directory
2014-02-24 14:13:02.257 [1192:f44]: board config = n81ap
2014-02-24 14:13:02.264 [1192:f44]: no value returned for BootArgs
2014-02-24 14:13:02.264 [1192:f44]: _copyDeviceProperty() failed for restore bootargs
2014-02-24 14:13:02.272 [1192:f44]: no value returned for MarketingPartNumber
2014-02-24 14:13:02.272 [1192:f44]: _copyDeviceProperty() failed for mpn
2014-02-24 14:13:02.273 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.274 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.285 [1192:f44]: value query for 'HardwareModel' returned 'N81AP'
2014-02-24 14:13:32.300 [1192:f44]: <Restore Device 06F59780>: operation 28 progress -1
2014-02-24 14:13:32.364 [1192:f44]: device returned CFError with code 40
2014-02-24 14:13:32.364 [1192:f44]: dumping CFError returned by restored:
2014-02-24 14:13:32.364 [1192:f44]: CFError domain:AMRestoreErrorDomain code:40 description:storage device did not become available
2014-02-24 14:13:32.384 [1192:f44]:
==== device restore output ====
"P=N81 m=2.2 V=m"
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-169.10 Feb 13 2013 22:10:14
AppleBCMWLANCore::init(): AppleBCMWLANV2-169.10 Feb 13 2013 22:10:17
000522.906303 wlan.W[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): @24 - Invalid 2.4 GHz Cal data in tuple 0x02
000522.907778 wlan.N[1] AppleBCMWLANProvisioningManager::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr <<<mac address>>>
000522.909596 wlan.N[2] AppleBCMWLANConfigManager::gatherParameterData(): AWDL is not supported.
000522.914563 wlan.N[3] AppleBCMWLANCore:start(): Starting with MAC Address: <<<mac address>>>
000522.914795 wlan.W[4] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 80, error 61 (state 0x20)
IO80211PeerManager::initWithInterface cant add monitoring timer
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x916e0600
000522.916824 wlan.N[5] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x83b41000 (this 1, provider 0)
000522.916944 wlan.N[6] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
display-scale = 2
display-rotation = 0
found suitable IOMobileFramebuffer: AppleCLCD
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 13 2013 22:02:59
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init [OK]
[VFL:ERR] _LoadVFLCxt(line:1479) fail CS 1!
[VFL:ERR] _LoadVFLCxt(wCSIdx:1)(line 1779) fail!
[WMR:ERR] VFL_Open failed
AppleNANDLegacyFTL::start: AND init failed
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49152 62078<-usb->512
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(12, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(18, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49153 62078<-usb->768
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49154 62078<-usb->1024
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816210
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49156 62078<-usb->1536
AppleUSBDeviceMux::handleConnectResult new session 0x91816268 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816268
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49159 62078<-usb->2304
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49164 62078<-usb->3584
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'BootArgs' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'MarketingPartNumber' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
Restore options:
UUID => <CFString 0x1ed27a50 [0x32b100]>{contents = "B30995A9-9CBE-F743-9507-039BDD0D56EF"}
MinimumSystemPartition => <CFNumber 0x1ed279a0 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionSize => <CFNumber 0x1ed28300 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
SystemPartitionPadding => <CFBasicHash 0x1ed27470 [0x32b100]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1ed277b0 [0x32b100]>{contents = "128"} = <CFNumber 0x1ed279d0 [0x32b100]>{value = +1280, type = kCFNumberSInt64Type}
3 : <CFString 0x1ed27ce0 [0x32b100]>{contents = "16"} = <CFNumber 0x1ed27a00 [0x32b100]>{value = +160, type = kCFNumberSInt64Type}
4 : <CFString 0x1ed1f1a0 [0x32b100]>{contents = "32"} = <CFNumber 0x1ed274d0 [0x32b100]>{value = +320, type = kCFNumberSInt64Type}
5 : <CFString 0x1ed27100 [0x32b100]>{contents = "8"} = <CFNumber 0x1ed282f0 [0x32b100]>{value = +80, type = kCFNumberSInt64Type}
8 : <CFString 0x1ed274e0 [0x32b100]>{contents = "64"} = <CFNumber 0x1ed27340 [0x32b100]>{value = +640, type = kCFNumberSInt64Type}
entering partition_nand_device
device supports boot-from-NAND
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49165 62078<-usb->3840
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49167 62078<-usb->4352
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49168 62078<-usb->4608
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49169 62078<-usb->4864
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
[IOFlashPartitionScheme:ERR] AppleNANDFTL initialization failed
[nand_part_core:ERR@ 429] no fbbt service available
[nand_part_core:BUG@3024] failed to create partition devices
unable to check is-bfn-partitioned property
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND failed to initialize: No additional error message.
==== end of device restore output ====
2014-02-24 14:13:32.384 [1192:f44]: AMRAuthInstallDeletePersonalizedBundle
2014-02-24 14:13:32.892 [1192:f44]: <Restore Device 06F59780>: Restore failed (result = 40)
2014-02-24 14:13:33.517 [1192:14d4]: iTunes: Restore error 40
2014-02-24 14:15:03.369 [1192:120]: Looking up device with muxID:1
2014-02-24 14:15:03.369 [1192:120]: Muxed device disconnected
2014-02-24 14:15:03.369 [1192:120]: RestoreOS mode device disconnected
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.916 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.955 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.993 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.165 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.188 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.211 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 1
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.230 [1192:1230]: Recovery mode device connected
2014-02-24 14:15:10.231 [1192:1230]: Found new device.
2014-02-24 14:15:10.241 [1192:14d4]: iTunes: SCEP 2Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Hi
I want configure the log file to show the amount of bytes used for every person in apache tomcat
How can i do this?Usually, this is due to a localization difference in the JVMs. When WLS boots, the .log file should show you some detailed information about the locale it is using, make sure that is consistent across the machines.
-
Bad date recorded by AccessServer in Audit Log File
Hi all,
I have installed OAM and configure Audit Log File to AccessServer:
Access System Configuration >> Access Server Configuration >> and put ON "Audit to File"
The log is recorded OK, but when compare the date writed in log file with SO date, there are 6hs of diference
LOG FILE
01\/28\/2009 *00:18:07* \-0500 - AUTHZ_SUCCESS - GET - AccessServer - 192.168.3.105 - sec.biosnettcs.com\/access\/oblix\/lang\/en\-us\/msgctlg.js - cn=orcladmin\,cn=Users\,dc=biosnettcs\,dc=com - 00:18:07 - http - AccessGate - - 2
SO date
# date
mar ene 27 *18:18:15 CST* 2009
# date -u
mié ene 28 *00:18:23 UTC* 2009
How we can see in this lines the audit log is recording date in UTC, but a need this in the timezone setted in SO.
How can do this (print date in audit log file with the same timezone setted by SO)??
Thaks in advance,
JulioI response myself.
There is no way to set the Date/Time format to any other than UTC for the OAM component logs
See note 742777.1 for deeph information.
Julio. -
Problem using file based JNDI with JMS Bridge, WL 6.1sp3
I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
I am having trouble getting the bridge to look up the MQ queue in the file based
JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
to use. I am getting the following error:
<Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
Bridge" is getting the connections to the two adapters.>
<Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
<Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
= weblogic.jms.adapter.JMSConnectionSpec@27166f>
<Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
<Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
Principal for Container Managed Security Context.>
<Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
<Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
Principal for Container Managed Security Context.>
<Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
<Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
request.>
<Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
Bridge" failed to connect to the source destination and will try again in 25 seconds.
(javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
<
The configuration of the bridge, printed out in the log, is:
<Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
STARTUP! Bridge Provd Messaging Bridge's source properties are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=null
ConnectionFactoryJNDIName = PMS.mqQcf
ConnectionURL = file:/opt/mqm/java/mq-jndi
InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
DestinationType = Queue
DestinationJNDIName = PMS.mqProvdRequest>
<Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
STARTUP! Bridge Provd Messaging Bridge's target properties are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=null
DestinationType = Queue>
Am I correct in assuming it should be using the fscontext connection factory?
Why is it using the weblogic one?
Jason
CR081511_61sp3.jar patch should fix the problem. Make sure that the
jar file is picked up. It should be put before other weblogic jar files.
You should be able to tell if it is picked up by looking at the first
couple of lines of your server log file.
Dongbo
Jason Kriese wrote:
>
> I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
> WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
>
> I am having trouble getting the bridge to look up the MQ queue in the file based
> JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
> instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
> to use. I am getting the following error:
>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
> Bridge" is getting the connections to the two adapters.>
> <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
> RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
> <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
> RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
> = weblogic.jms.adapter.JMSConnectionSpec@27166f>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
> Principal for Container Managed Security Context.>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
> Principal for Container Managed Security Context.>
> <Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
> Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
> ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
> url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
>
> <Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
> request.>
> <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
> Bridge" failed to connect to the source destination and will try again in 25 seconds.
> (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
> ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
> url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
> <
>
> The configuration of the bridge, printed out in the log, is:
>
> <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
> STARTUP! Bridge Provd Messaging Bridge's source properties are:
> AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
> Classpath=null
> ConnectionFactoryJNDIName = PMS.mqQcf
> ConnectionURL = file:/opt/mqm/java/mq-jndi
> InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
> DestinationType = Queue
> DestinationJNDIName = PMS.mqProvdRequest>
> <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
> STARTUP! Bridge Provd Messaging Bridge's target properties are:
> AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
> Classpath=null
> DestinationType = Queue>
>
> Am I correct in assuming it should be using the fscontext connection factory?
> Why is it using the weblogic one?
>
> Jason
-
Hi all
I am working with JRun4. My problem is logging.
logging mechanism can send messages to these destinations:
1) The console screen
2) The Log file.
In both cases , logging information is obtained. but The console screen shows information which i print by System.out.println() , and The log file shows information which is Event generated. I want to store information in a file , which is given by System.out.printlln().
I have done entries in jrun.xml as
<service class="jrunx.logger.LoggerService" name="LoggerService">
<attribute name="format">{server.date} {log.level}{log.exception}</attribute>
<attribute name="errorEnabled">true</attribute>
<attribute name="warningEnabled">true</attribute>
<attribute name="infoEnabled">true</attribute>
<attribute name="debugEnabled">false</attribute>
<attribute name="metricsEnabled">true</attribute>
<attribute name="metricsLogFrequency">60</attribute>
<attribute name="metricsFormat">Web threads(busy/total): {jrpp.busyTh}/{jrpp.totalTh} Sessions: {sessions} Total Memory={totalMemory} Free={freeMemory}</attribute>
<service class="jrunx.logger.ThreadedLogEventHandler" name="ThreadedLogEventHandler" >
<service class="jrunx.logger.ConsoleLogEventHandler" name=":service=ConsoleLogEventHandler"/>
<service class="jrunx.logger.FileLogEventHandler" name="FileLogEventHandler">
<attribute name="filename">{jrun.rootdir}/logs/{jrun.server.name}-event.log</attribute>
<attribute name="rotationSize">200k</attribute>
<attribute name="rotationFiles">3</attribute>
<attribute name="closeDelay">5000</attribute>
<attribute name="deleteOnExit">false</attribute>
</service>
</service>
</service>
what should i do for this?
Please guide me.You should put it in the root of your classes (Ex: with JBuilder is
$projecthome/classes)
Alexp wrote:
Hi !
I have a problem with the logging configuration.
What is the right place for the log4j.properties file?
Thanks a lot for cooperation,
Alex. -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
Hi,
I'm evaluating Berkeley DB Java Edition for my application, and I have the following code:
public class JETest {
private Environment env;
private Database myDb;
public JETest() throws DatabaseException {
EnvironmentConfig envConfig = new EnvironmentConfig();
envConfig.setAllowCreate(true);
envConfig.setTransactional(false);
envConfig.setCachePercent(1);
env = new Environment(new File("/tmp/test2"),envConfig);
DatabaseConfig dbConfig = new DatabaseConfig();
dbConfig.setDeferredWrite(true);
dbConfig.setAllowCreate(true);
dbConfig.setTransactional(false);
myDb = env.openDatabase(null, "testing", dbConfig);
public void cleanup() throws Exception {
myDb.close();
env.close();
private void insertDelete() throws DatabaseException {
int keyGen = Integer.MIN_VALUE;
byte[] key = new byte[4];
byte[] data = new byte[1024];
ByteBuffer buff = ByteBuffer.wrap(key);
for (int i=0;i<20000;i++) {
buff.rewind();
buff.putInt(keyGen++);
myDb.put(null, new DatabaseEntry(key), new DatabaseEntry(data));
int count = 0;
System.out.println("done inserting");
keyGen = Integer.MIN_VALUE;
OperationStatus status;
for (int i=0;i<20000; i++) {
buff.rewind();
buff.putInt(keyGen++);
count++;
status = myDb.delete(null, new DatabaseEntry(key));
if (status != OperationStatus.SUCCESS) {
System.out.println("Delete failed.");
System.out.println("called delete "+count+" times");
env.sync();
public static void main(String[] args) throws Exception {
JETest test = new JETest();
test.insertDelete();
test.cleanup();
After running the above, I expected that the log file utilization be 0%, because I delete each and every record in the database. The status returned by the delete() method was OperationStatus.SUCCESS for all the invocations.
I ran the DbSpace utility, and this is what I found:
$ java -cp je-3.2.13/lib/je-3.2.13.jar com.sleepycat.je.util.DbSpace -h /tmp/test2 -d
File Size (KB) % Used
00000000 9765 99
00000001 3236 99
TOTALS 13001 99
Obviously, the cleaner thread won't clean log files that are 99% used.
I did expect the logs to be completely empty, though. What is going on here?
Thanks,
LiorLior,
With the default heap size (64m) I was able to reproduce the problem you're seeing. I think I understand what's happening.
First see this note in the javadoc for setDeferredWrite:
http://www.oracle.com/technology/documentation/berkeley-db/je/java/com/sleepycat/je/DatabaseConfig.html#setDeferredWrite(boolean)
Note that although deferred write databases can page to disk if the cache is not large enough to hold the databases, they are much more efficient if the database remains in memory. See the JE FAQ on the Oracle Technology Network site for information on how to estimate the cache size needed by a given database. In the current implementation, a deferred write database which is synced or pages to the disk may also add additional log cleaner overhead to the environment. See the je.deferredWrite.temp property in <JEHOME>/example.properties for tuning information on how to ameliorate this cost.
The statement above about "additional log cleaner overhead" is not quite accurate. Specifically, we do not currently keep track of obsolete information about DW (Deferred Write) databases. We are considering improvements in this area.
Your test has brought out this issue to an extreme degree because of the very small cache size, and the fact that you delete all records. Most usage of DW that we see involves a bulk data load (no deletes), or deletes performed in memory so the record never goes to disk at all. With the tiny cache in your test, the records do go to disk before they are deleted.
You can avoid this situation in a couple of different ways:
1) Use a larger cache. If you insert and delete before calling sync, the inserted records will never be written to disk.
2) If this is a temporary database (no durability is required), then you can set the je.deferredWrite.temp configuration parameter mentioned above. Setting this to true enables accurate utilization tracking for a DW database, for the case where durability is not required.
# If true, assume that deferred write database will never be
# used after an environment is closed. This permits a more efficient
# form of logging of deferred write objects that overflow to disk
# through cache eviction or Database.sync() and reduces log cleaner
# overhead.
# je.deferredWrite.temp=false
# (mutable at run time: false)
Will either of these options work for your application?
Mark -
Managing and configuring log files for Oracle 9ias
Hi all,
I'm wondering where I can find documentation on managing and configuring log files like:
ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
ORACLE_HOME/dcm/logs/*
ORACLE_HOME/ldap/log/*
ORACLE_HOME/opmn/logs/*
ORACLE_HOME/sysman/log/*
ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
because I didn't find anything in document like:
Oracle9 i Application Server
Administrator�s Guide
Release 2 (9.0.2)
May 2002
Part No. A92171-02
So, if anyone has any idea...
Thanks in advanceDoes anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
Any ideas? -
Important Configuration/Log Files for Storage Tek
Hi,
I have 6140 Storage Arrays, in the same ref. I would like to know more about command line details.
1. Important Configuration files
2. Important Log Files
3. Event Messages file
4. Important utilities like sscs, service, suppport and their default path.
5. Solaris FC constroller configuration files.
Please suggest in case I can get this details from any doc, as I already referred Sun Storage Tek 6140 Getting Started Guide for the same but not found much details.
Thanks
RajanI figured out what my problem was here. The Windows user that the portal processes run as is the user who writes the log files. In this case, this user is a local user to the portal server and not a Windows domain user. This means that the user does not have access to write to the shared drive.
We had two options as to what we could do here. The first would be to change the user that's running the portal to a user that could write to that shared drive. The second option would be to have the portal write the log files locally on the portal server and then have a script run as a domain user on that server sometime in the day and copy the files to the shared drive. We are going with the second option. -
Problem with logging in log files.
HI,
Our's is a client/server application.
In our application there are so many clients.
They each have separate page(web page).
When a client download any file from their site it logs(client name, time, file name etc.) into a common log file(access.log) and a client specific log file(access.client_name).
Logging in common file(access.log) is performing well.
Logging in client specific log file works for some clients and don't work for some clients.
For example there is a client called 'candy'.
Some times it logs in the log file, access.candy
some times it don't log.
Tell me wht is the problem.
If you want more information regarding my problem, I will send.
Please give me some solution.
Thank you.............Third Party Client: ((__null) != m_lock && 0 == (*__error())) Can't create semaphore lock
There seems to be something wrong with a handling (m_lock = method of lock) of semaphore mechanism-- It appears to be a program issue, which is either on your local machine or a remote Web site' page(s).
'semaphore' Apple definition (quotation from ADC) :
A programming technique for coordinating activities in which multiple processes compete for the same kernel resources. Semaphores are commonly used to share a common memory space and to share access to files. Semaphores are one of the techniques for interprocess communication in BSD.
In short, it is a flag to terminate a task/thread efficiently without fail prior to another task/thread starts-- a synchronization mechanism among cooperating threads/tasks. (You might need to have some understanding of the basic concepts of locks and semaphores.)
I would test any suspect applications to uninstall temporarily to see if the erratic events are displayed on Console. Perhaps, vlc player?
Fumiaki
Tokyo
Maybe you are looking for
-
I'm working with Acrobat 9 Pro and creating a form with a table. The table had 4 columns the first 3 have non-numerical data. The forth column is a cost column. What I need it to do is if there is something in columns 1-3 for it to talley the c
-
I have checked a few times tonight with my AppleTV and it reports not update is available at this time. Not sure what to do at this point with that.
-
How to transfer music from an old computer to new
I have a new computer and i want to transfer music from my old computer to my new. how do i do this?
-
Not able to connect sqlplus in linux
Hi, I am using Enterprise Linux 5. I am not able to connect database using sqlplus. After entering sqlplus command, getting following error: [ra10g@blue ~] sqlplus / as sysdba /oracle/oa10g/10204/bin/sqlplus: Line 41: syntex error near unexpected tok
-
[Xorg 7.4] Thumb buttons stopped working in Opera
Hi there! After upgrading to xorg 7.4 i noticed that the thumb buttons of my mx518 stopped working. My xorg.conf is empty. I tried with xbindkeys but that didnt work. anyone got a solution? greetz