JMS Priority For Queue doesnt work.

Hi,
          How does JMS priority for a queue work for WLS 8.1 ?
          I have tried putting the messages in the queue with different priorities, but they are being picked up sequentially.
          Is it that since queue is a FIFO implementaion the messages are picked up sequentially?
          I would appreciate any help in this regard.
          Thanks.
          Khyati

Hello,
          You need to first add a key to destination and specfiy JMSPriority as the key, then it will work. Read info on following link , it will make the point clear.
          http://e-docs.bea.com/wls/docs70/faq/jms.html#252725
          Kuldeep

Similar Messages

Steadyshot stabilization for video doesnt work since Lollipop update. HELP!

Where should I send information about SERIOUS issue of new Lollipop on XPERIA Z3? Since last update from Kitkat the SteadyShot stabilization for video doesnt work (intelligent mode works standard). Previously great videos are now shaky and simply ugly. Please SONY make something with that on next update. Probably Ill have to sell my Z3 if there will be no patch. Im filmaker who needs good video quality in his smartphone.

i tried both...still inteligent works as standar what means stabilization is very poor...here more info about that lollipop bug found on the net http://forum.xda-developers.com/z3-compact/help/steadyshot-intelligent-active-gone-t3106177

Swipe for Keyboard doesnt work. Dont spend the 1.99!

Swipe for Keyboard doesnt work. Dont spend the 1.99!

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

JMS Adapter for TIBCO BUSINESS WORKS v5.6

Hi,
We have a requirement to send a data from BI system to TIBCO BUSINESS WORKS via PI 7.1.
We are suggested to to use JMS adapter for connecting TIBCO BUSINESS WORKS. I searched in the forum, but could not find any related thread for TIBCO BUSINES WORK.
Please share your experience on TIBCO BUSINES WORK with SAP PI with JMS adapter.
1. How to get the drivers of TIBCO and installed it in Java stack
2. What is the Transport protocol??
3. Queue name,server etc?
4. XSD file for receiver. ( Hope, 3rd party ll provide )
Thanks in advance
Regards
Baskaran K

Selvam,
It was long time before I did.. I guess I did added com.sap.aii.adapter.lib_api.jar file as well in addition to the required driver files.
Cheers
Agasthuri

Since I updated to firefox 5.0, the windows media player plug in for firefox doesnt work anymore :(

Ok I recently upgraded to firefox 5.0, and then when I went to a website that uses windows media player to watch videos and news reports, it said I needed to download the windows media player plug in for firefox. And yet I had already done that in the past. So it directs me to the plug in for windows media player 11, I download and install and it doesnt work. Website repeats the same message, you need to download plug in. It was working fine with firefox 4.0! I use the OS Windows 7, 64bit. Any help please?

Yes I did, at first it identified it as already there, so it gave the option of repairing it, etc, so I uninstalled the Windows Media Player, then Installed it again, and it still doesn't seem to work! I have the same problem with several other plug ins, in the add ons and plug in section of Mozilla tools, I see that say, "incompatible with firefox 5.0" but as days go by those add-ons, that are built by those other websites seem to be repairing it, but I wanted to know for something as important as windows media player plug in, am I the only one getting this problem? :/

How come script for cursor doesnt work in jsp pg?

it works in an html pg but it doesnt work in a jsp page when i put in a javascript for an animated cursor btw the body tags:
<script>blah</script>
WHY? thanks

WHY?Because it doesn't like you.
View source on the generated JSP page.
Compare it to the html page.
Save the source as a static html file.
Find what is causing the problem - maybe a javascript error on the page that prevents your code running?
If you have IE, Tools:options: advanced tab, and uncheck "disable script debugging" so you can see the error messages - or get a browzer with a decent javascript debugger.
Good luck,
evnafets

My bluetooth for ipad doesnt work

My bluetooth for my 1st gen ipad doesnt work it searches, takes a while to find anything and then it says it cant connect. Any reasons or solutions to my problem same thing goes on for my iphone 3g and iphone 4 but im more worried for the ipad since its what i use more. ps no warranty because i

Are you trying to tether? because that is supported over wifi. you can use icloud to get some data to sync. bump can also transfer certain data like contacts or photos.

Acs for windows doesnt work with w2k8

Hi Folks
I have win 2008 server as DC,
i have installed acs 4.2 on menber server (win 2003) , but it doesn't work, how to let this one work , any patch for that
thanks

Hi,
Inorder to support windows 2008 you need ACS 4.2.0.124 patch 4.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
If you have a windows 2k8 R2 as DC, then you need an ACS 5.2
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Installation_Guide/windows/install.html#wp1041324
Hope this helps..
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

"Mark as played" for podcasts doesnt work in itunes 11.1.3 and Mavericks

Ever since updating to Mavricks, iTunes is not keeping track of my podcasts correctly. If I right click a podcast from the "Unplayed" list and choose "Mark As Played," nothing happens. the podcast stays in that list and the blue dot stays next to the podcast art. How do I get iTunes to acknoledge/delete played podcasts?

Okay so I have now just about worked out how to get around some of these issues.
Unfortunately you cannot do everything from the same view!!
To delete a podcast you need to be in the list view where right-click menu option delete seems to work as before.
To force download an episode that has the cloud icon you need to be in the podcasts view when there is a right-click menu option to download this episode.
Why this option is not available in list view shows lack of quality control somewhere.
Once we have episodes downloaded without the cloud icon then the played/unplayed seems to work and the unplayed episodes get moved to ipod/iphone when synched.
What a palaver, it all used to be so simple!

Perl script for xchat doesnt work

I like to start a perl script for xchat.
Thats my problem:
Can't locate Socket.pm in @INC (@INC contains: /usr/lib/perl5/5.8.3/i686-linux /usr/lib/perl5/5.8.3 /usr/lib/perl5/site_perl/5.8.3/i686-linux /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl .) at (eval 3) line 31.
line 31 is "use Socket;"
I tried also use IO::Socket; but that changes nothing.
Anyone knows whats the problem or wich perl-modul isnt on my system?
btw: sry for the bad english..

bigh wrote:
Thats my problem:
line 31 is "use Socket;"
I tried also use IO::Socket; but that changes nothing.
Anyone knows whats the problem or wich perl-modul isnt on my system?
Hello bigh,
Socket and IO::Socket are standard perl modules:
me@here:~/tmp]$ tar tvzf perl-5.8.4.tar.gz | grep Socket.pm
-r--r--r-- nwc10/nwc10 11882 2003-08-13 21:55:04 perl-5.8.4/ext/IO/lib/IO/Socket.pm
-r--r--r-- nwc10/nwc10 9801 2004-04-01 17:58:43 perl-5.8.4/ext/Socket/Socket.pm
In Arch they should belong to the perl package (i don't have an Arch box at the moment to confirm it more explicitely). So it is strange that neither Socket.pm nor IO/Socket.pm can be found in your @INC on your host.
Hope it helps anyway

My stupid FOR loop doesnt work to create a new array, help!

Hello, I need help creating a new integer array that contains exactly one of each element a different array.
My original array is called co[]
lets say it has the values: 1213445232
I want my new array called classArr[]
for example, it would end up being: 12345
my integer array is called classArr[]. and i want it to store exactly one of each element from the co[] array. Here is my code. It compiles without errors, but I get out of bounds exception when i run it.
classArr[0] = co[0];
int temp = 1;
for (int k = 0; k < x; k++) { //x is the number or elements in co[]
     for (int j = 0; j < temp; j++) {
          if (classArr[j] != co[k]){
                classArr[temp] = co[k];
                temp++;
System.out.println("Values in new array");
for (int c = 0; c < temp; c++){
     System.out.println(classArr[c] + " ");
} Thanks for your help!!!!

im pretty sure the initialization of the variables are
set right.Well, without seeing the initialization I doubt I can help you. Try to figure out if it is classArr[temp] or co[k] that causes the exception. (Hint: put them on two different lines.)
x is the number of elments in the co[] arrayTry replacing it with co.length.
classArr[] is a dynamic array set to a number, lets
say it's abcWhat is a "dynamic array" in your terminology? And what is "abc"? Please provide at least the declarations of your arrays.

Apple tv brasil search for movies doesnt work

I have tried several times have restored André updated but justa cant use the search in movies

Please carefuly read how to change your password in:
support.apple.com/kb/ht1274

Does the priority queue always work?

Hi
I have a 8Mbp of wan link which sometime gets saturated and I have shaped average this to 8Mbps but i am running vocie on this WAN link and have defined priority for voice with 850kbps under voice class. My question is when the link is not fully utilized, Will the packets from priority queue are always dequeued first as compared to packets sent from from other queus or will the QoS will not do anything here since the link utilization is lot less than what is sepecified in shape average. I am asking this to confirm if the priority queue always help to overcome the issue of jitter if either the link is saturated or not?
Thanks

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
You describe PQ and shaping, but the former is usually a part of doing QoS on L2/L3 switches, and the latter on routers. What device(s) and their IOS versions and the WAN media are you working with?
On "routers", interfaces generally have FIFO tx-rings, only when they overflow, are packets placed in CBWFQ queues. Within CBWFQ, LLQ will be dequeued first, but such packets might have already been queued behind other non-LLQ traffic within the interface tx-ring. (NB: for routers, with tx-rings, when supporting VoIP, you may want to minimize the size of the tx-ring.)
Shapers, in my experience, are "interesting". First, I believe many shapers don't account for L2 overhead, but provider CIRs often do. So unless you shape slower than the nomimal CIR rate, you can send faster than the available bandwidth. (Often I've found shaping 10 to 15% slower allows for average L2 overhead.)
Second, shapers work on averages over time intervals. For VoIP, you'll often want to insure the shaper is using a small Tc, otherwise it will allow FIFO bursts. (I've found a Tc of 10ms seems to support VoIP fairly well.)
Third, I suspect some shapers might have their own queues between the interface and the defined policy queues. If they do, unknown what their queuing organization is or their supported queuing depths. If this is the case, makes it difficult to engineer QoS.
Whenever possible, I've found it beneficial to work to avoid using shapers especially for timing sensitive traffic, like VoIP. In your case, I would suggest, if possible, obtaining 10 Mbps of WAN bandwidth and somewhere passing the traffic through a physical 10 Mbps interface, with a QoS policy.
But to more directly answer your question, PQ (or LQ) will dequeue its packets next compared to other "peer" queues. This should always help VoIP for delay and jitter, but there's more involved whether this is necessary and/or whether it's helpful enough when necessary.
You ask about when a link is saturated, but a link is 100% saturated everytime a packet is being transmitted. Often link usage is represented in percentages of usage of possible maximum transmission rate over some time period, but when it comes to QoS, 100% utilization might be just fine while 1% utilization is not. Much, much more information, about your situation, might be needed to offer truly constructive recommendations.

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

JMS Priority For Queue doesnt work.

Similar Messages

Maybe you are looking for