Job does not start once I submit it? I don't know why.

I am trying to burn my final cut project onto a dvd so I can take it from the office and watch it at home. It doesn't matter how good the quality is for now because I just want to make some notes. I have brought the file from final cut into Compressor and set the target as MPEG-2 5.0Mbps 1-pass because that that is the target for DVD 120 minutes encoder. It also has the DVD Dolby Audio target as well. Now everything was going smoothly but when I submitted the job it did not proceed to do anything. It came up like it was going to but the progress bar didn't start and the time remaining looked like this:
Does anyone have any suggestions? Thanks for the help.

Maybe go into System Preferences (Apple menu top left of screen), go to the QMaster settings pane, Stop Sharing, wait a minute, then Start Sharing.

Similar Messages

Sound does not sync up with the video and don't know why.

When I converted the video's, the sound and video are perfect, but when I add them to itunes, the sound is off with the video. Anyone know why and how to fix it?

read my post

My Mac will not start up like normal and I don't knwo why

My iMac will not start up like normal and I don't know why. I tried to run Skype then nothing happend so I tried to restart my computer, but then it never loaded

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

TS2446 On my I Pad I am getting a message that says "Your Apple ID has been Disabled" nothing else. I have not tried to log in so I don't know why this is happening. How do I get it enabled?

On my I Pad I am getting a message tha says "Your Apple ID has been disabled". Nothing else. I have not tried to log in so I don't know why this is happening. How do I get it enabled?

Read the article you linked.
If changing your password does not resolve, then contact itunes support

My iphone 4 does not search photos by Places. I need to know why.

I can not serch pictures in Photo by Places. I need to know why.

you can try
http://osxdaily.com/2012/03/16/fix-for-personal-hotspot-missing-after-ios-update /

Rman backup jobs does not start automatically

I have the next question:
When I run such script in RMan:
RUN
ALLOCATE CHANNEL c1 DEVICE TYPE sbt;
SEND 'OB_MEDIA_FAMILY mf_rman';
BACKUP archivelog all;
It creates job on OSB server:
ob> lsj
Job ID Sched time Contents State
oracle10/6 none database cbs3 (dbid=2397799862) processed; Oracle job(s) scheduled
oracle10/6.1 none archivelog backup retryable at 2010/10/01.23:05 ("lsjob --log oracle10/6.1" for details)
But it doesn't statrt immediatelly at the same time, so I has to run the job manually:
ob> runj -n oracle10/6.1 -d Drive2
ob> lsj
Job ID Sched time Contents State
oracle10/6 none database cbs3 (dbid=2397799862) processed; Oracle job(s) scheduled
oracle10/6.1 none archivelog backup running since 2010/10/01.17:10
How to make Rman start backup job at once?
Edited by: OraSun on 01.10.2010 4:44

If you have created a database storage selector, you don't need to include media manager parameters in the RMAN script. You would include media manager parameters in script, if you want to override the database storage selector settings. For example, in the database storage selector you have indicated that the media family is mf_rman...OSB will automatically use that media family based on database storage selector settings. Per the RMAN script, you want this backup operation to use mf_rman...since database storage selector already defines this, you don't need to include it in the RMAN script. If your database storage selector defines use of mf_rman media family but you want a particular backup to use "foo" media family, then you would include that parameter in your script so it would override the database storage selector.

Jobs does not start

Hello, jo
I got the issue wich is described below.
"The job failed. The Job was invoked by User IPCC1\CRSAdministrator. The last step to run was step 3 (Detect nonlogged agent shutdown.)."
I do not know what is the impact if I start it because the Cisco Contact Center is in production.
All the best,
Gudila Aurelian.

If you have created a database storage selector, you don't need to include media manager parameters in the RMAN script. You would include media manager parameters in script, if you want to override the database storage selector settings. For example, in the database storage selector you have indicated that the media family is mf_rman...OSB will automatically use that media family based on database storage selector settings. Per the RMAN script, you want this backup operation to use mf_rman...since database storage selector already defines this, you don't need to include it in the RMAN script. If your database storage selector defines use of mf_rman media family but you want a particular backup to use "foo" media family, then you would include that parameter in your script so it would override the database storage selector.

IMac does not starts once on sleep mode after last Mavericks update... Anyone with the same problem?

Since the last update, when my iMac goes to sleep mode it seems that the mouse or the keyboard can wake it up. I have to do a "hard reset" everytime. Anyone has this type a problem?

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
 ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
Disconnect all wired peripherals except those needed to boot, if any. Be sure to disconnect all USB hubs. If you use a keyboard or mouse plugged into a hub, plug the devices directly into a built-in USB port and remove the hub. Test.
Step 4
If you have more than one user account, you must be logged in as an administrator for this step.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for Diagnostic and Usage Messages. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. In the search box in the window's toolbar, enter "powerd" (without the quotes.) Select the last few messages that appear, if any, and copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).

Just installed itunes successfully but know will not start, i a on windows 8, any one know why

cannot start itunes in window 8, why?

Hello there,
It sounds like you are unable to launch iTunes after installing it on your PC. I found this article for you to help troubleshoot what you are seeing here named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting iTunes for 3rd party plug ins with this section:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
When you have done that, if the issue persists there are additional steps in the article to help isolate the issue and proceed according to those steps if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I had to start a new account and I don't know why? Do you mr/ms Moderator?

I have had an account here for a good while. I have had the username "JackdaShack" and a number of moderators have helped me in the past. For some reason this time loggin in it would not accept my username and passoword. I finally had to start a new account.
I am not a happy camper. While it's not the end of the world I had a history. I had earned credits and had saved the links to a lot of questions anwered that I could refer back to in my profile
Can anyone help me if I give the username and password I had been using? I'd like to get that history back. I can give you the old email I used to sign in with. Now that email account was recently dropped but I don't think that has any connection with signing in as a username. That can be a nickname or an email address. Let me know if I have to give this info privately before I publish it openly. I'd really like to get that account back, the username and the history I had.
Thanks so much! jack JackdaShack
I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
Look to the left and click on the STAR for a KUDO
Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!

Please check your private messages for this account.
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

I'm trying to purchase Whatsapp but it is not downloading onto my iPhone. I don't know why.?

I tried it from my phone and my PC but both ways do not seem to install Whatsapp onto my phone. It keeps asking me to type my password and update my Billing info when I have but it just brings me back to the same pages again and again and it just doesn't download.

Sales tax.

Does not start its download.

Good day,
I'm sort of new to the buying of apps in the Apple Store and so I just bought this OS X Mountain Lion and the buying of the app was a success. Although, it does not start its download. As far as I know, our internet connection is perfectly fine (because I'm able to write this discussion on mine) and that I can surf the net. I am aware that the download does take a long time, like 3 to 4 hours? But nothing seems to be happening...
Anyone here had the same case that I am currently having?
Thank you!

The download time, is governed by your internet connection and speed. If you are connecting to the internet wirelessly, then it would take much longer than if you were directly connected with a wire.
If you feel it may be "stuck", quit all open applications, and restart your computer from the apple menu. Once the computer is restarted, re-open up the App's store, and select the purchases tab, then resume the download.

Compressor does not start the job after submit button clicked.

Hello All,
FCP 6.0/ Compressor 3.0.5
I am trying to export a section of a FCP timeline sequence (set with in and out) thorugh Compressor, into a couple of video formats (DVD and a custom H.264). After I set the destination and make surte that the source file is in place, I press "Submit" button and again "submit" from pop-up window and nothing happens. No usual window with the job processing appears, like it ussually does. I restarted programs and computer and no change. Compressor quitted unexpectedly few times within the same process of initiating export from FCP. I tried test export from a different FCP project and the compressing does not start either after pressing "submit".
I did not have this problem before. I would greatly appreiciate any suggestions.
Best to all,
Izabela

Dear ToddNashville,
Thank you so much! This was it! It was processing but did not see the process as the "ghost" icons of the new exporte files in destinations would not appear immiediately as I thought they usually do. Once they are completed or 1/2 way through they appear.
I did not try the batchlist before. It is so clear as far as whats running and how much time left! I hope all will process fine.
Thank you!

Background job in APO does not start because of invalid user name

Hello,
I have a macro in a planning book and the /sapapo/cons_check program which a triggered via a background job. Now, I have problems with the start of the job:
At the time the job was created inside SAP, an error occured. The job contains invalid values.
The user name within the job does not exist any more.
Now, I try to change the user name of the job (via step in sm37), but the error occured again.
I have the possibility to create the invalid user name once again in su01.
But I want to change the user name of the job - does somebody know how to do it?
Thanks for your help!
Kind regards
Heinz

Hello Heinz, this looks surprising.
It's quite easy to change the user name in the SM37 job step, and we haven't faced issues with this.
Could you check how many jobs are in either "scheduled" or in "released" status, and change steps for all of them? May be you changed the scheduled job, but the released job wasn't changed.
Use your job name and give a search date as 1-2 years in the past, and around 1 month in the future. With this time horizon, you should most likely be able to capture all the relevant jobs having the same name that you are using.
Now change the user name in step for all the jobs received above to be fully sure.
One more trial could be to copy the current scheduled job to another job, modify the user name in this newly created job and then delete the old one.
One of the above trials might possibly help you in some way, else its very tough to understand/explain your situation.
Thanks - Pawan

Job does not start once I submit it? I don't know why.

Similar Messages

Maybe you are looking for