Job Scheduling error

Hi Experts,
I have a critical requirement. I need to kick off 3 interfaces from 1 report each of which will update the Oracle database.
I've used JOB_OPEN and JOB_CLOSE function modules and using SUBMIT <report> VIA JOB <jobname> NUMBER<jobnumber> AND RETURN. My problem is that these 3 reports are not getting executed, means they are not updating the Oracle database when they are kicked-off from the new program.
But if i run each of them individually with same test data, it runs perfectly and updates the Oracle database. I tried to debug, it returns before going into START-OF-SELECTION event.
Any help will be appreciated
Thanks
Prateek

The VIA JOB addition also loads the program accessed in a separate internal mode when the SUBMIT statement is executed and the system performs all the steps specified before START-OF-SELECTION. This means the events LOAD-OF-PROGRAM and INITIALIZATION are triggered and selection screen processing is performed. If the selection screen is not processed in the background when VIA SELECTION-SCREEN is specified, the user of the calling program can eidit it and schedule the program accessed in the background request using the function Place in Job. If the user cancels selection screen processing, the program is not scheduled in the background job. In both cases, execution of the program executed is completed after selection screen processing and the system returns to the calling program due to the AND RETURN addition.
Hope you got it.

Similar Messages

IR jobs scheduled error

hi,
i have 13 jobs scheduled on workspace. the task is to import bqy document. when the scheduled run, i check the folder and i only see 10 bqy imported, not 13. when i see the job output, it says unknown error. no problems appear when i try to run the jobs one by one.
below is the error :
Job: 'FlashReportCharts_1' executed by user 'admin'
At 07/14/09 04:58 PM UTC+7 (server time)
Using Interactive Reporting Job Service 11.1.1.1.0.797.
Connecting to AI as 'sa' at 07/14/09 04:58 PM.
Sending SQL to server:
SELECT AL1.curr_month, AL1.curr_year FROM dbo.current_period AL1
1 rows retrieved at 07/14/09 04:58 PM.
Connecting to aijkt-hypdb as 'admin' at 07/14/09 04:58 PM.
Sending SQL to server:
<HYBRIDANALYSISOFF {SSFORMAT} {ROWREPEAT} {INDENTGEN -2} {SUPBRACKET} {SUPCOMMA} <QUOTEMBRNAMES {DECIMALS 0} <SUPSHARE {OUTALTNAMES} <OUTALTSELECT "Default" <PAGE ("Site" ,"Scale" ) "Site" "Input Value" {OUTALTNAMES} <OUTALTSELECT "Default" <ROW("Period") "Gen2,Period" "Gen3,Period" "Gen4,Period" <SYM {OUTALTNAMES} <OUTALTSELECT "Default" <COL("Year","Scenario","Measure") {SUPCOMMA} {TABDELIMIT} &CurrYear "Actual" "Budget" "Forecast" "Overburdened Removal" "Coal Sales" "Coal Barged" "Coal Produced" "Strip Ratio" "Coal Mined" "Coal Stock" "FOB Sales Price" !
Connecting to aijkt-hypdb as 'admin' at 07/14/09 04:58 PM.
Sending SQL to server:
<HYBRIDANALYSISOFF {SSFORMAT} {ROWREPEAT} {INDENTGEN -2} {SUPBRACKET} {SUPCOMMA} <QUOTEMBRNAMES {DECIMALS 0} <SUPSHARE {OUTALTNAMES} <OUTALTSELECT "Default" <PAGE ("Site" ,"Scale" ) "Site" "Input Value" {OUTALTNAMES} <OUTALTSELECT "Default" <ROW("Scenario","Period") "Actual" "Year Total" <SYM {OUTALTNAMES} <OUTALTSELECT "Default" <COL("Year","Measure") {SUPCOMMA} {TABDELIMIT} &PrevYear "Overburdened Removal" "Coal Sales" "Coal Barged" "Coal Produced" "Strip Ratio" "Coal Mined" "Coal Stock" "FOB Sales Price" !
61 rows retrieved at 07/14/09 04:58 PM.
Saving 'C:\Hyperion\products\biplus\data\cache\IRJobCache\4211a25c451326567edb40f6121ece4edd179d0\0a06011600002604-0000-25ec-00000009\0000012278b2fb70-0000-16b0-0a060116\FlashReportCharts_1-20090714.bqy' (compresseed) at 07/14/09 04:58 PM.
Save failed with unknown error.
Job for document FlashReportCharts_1.bqy completed at 07/14/09 04:58 PM UTC+7 (server time) on @HOST:aijkt-hypapp.arutmin.net with errors.
Edited by: r.senoputro on Jul 23, 2009 11:14 PM

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Job scheduling error : The return value was unknown. The process exit code was -1073741819. The step failed.

I am working in Sqlserver 2008 R2, SSIS 64 bit version
I am getting the below error while scheduling the job in the development server Database.
The return value was unknown. The process exit code was -1073741819. The step failed.
The SSIS front end execution runs fine.
Have anyone faced this issue before?

Hi Venkat,
If you already changed to 64bit and still doesn't work then create proxy account..
To create a proxy account
In Object Explorer, expand a server.
Expand SQL Server Agent.
Right-click Proxies and select New Proxy.
On the General page of the New Proxy Account dialog, specify the proxy name, credential name, and
description for the new proxy. Note that you must create a credential first before you create a proxy if one is not already available. For more information about creating a credential, see How
to: Create a Credential (SQL Server Management Studio) or CREATE CREDENTIAL (Transact-SQL).
Check the appropriate subsystem for this proxy.
On the Principals page, add or remove logins or roles to grant or remove access to the proxy account.
Thanks

Job : Scheduling Error in SM 37

Hi ,
We created a Generic data source based on View , It worked fine till yesterday , It fetched data . The cube was also filled . But when today i try to create info package , it is showing jon canceled in source system , When i go to source system ans see in SM37 , The job was canceled . The duration is 0 .
Th esource system connection is ok in RSA1->Check
The problem is Job is canceled every time ?
How to solve the issue ?

Kumar,
Are you able to see the job log - in SM37 make sure you check under user ALEREMOTE or RFCUSER ( or whatever your background user for R/3 is...) you will be able to find the log..
Arun
P.S please mark in your previous post that you have closed the same and restarted it for changing the topic..
Job

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

Job Scheduling in Solution Manager - Error creating Periodic Job

Hi all,
I am in the process of testing the Job Scheduling functionality using the Solution Manager. I have setup the criteria manager, ec. in the satellite system, and done the config in Solman as well.
I am able to successfully setup up a 'on-time' job.
it's only when I try to setup a periodic job, I end up getting following error
Any thoughts? Is there any piece of config that's missing? All the SICF services needed for this functionality are running fine.
Thanks for the help.
500 Internal Server Error
Error when processing your request
What has happened?
The URL https://fsspsm.target.com:/sap/bc/webdynpro/sap/wd_ags_ejr_job_req_gaf_app was not called due to an error.
Note
The following error text was processed in the system PSM : Message was not created
The error occurred on the application server fsspsmap01_PSM_00 and in the work process 1 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: BAPI_NOTIFICATION_CREATE of program SAPLDSWP_NOTIF
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: SUBMIT_REQ_CRM_DATA of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: SUBMIT of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: PROCESS_SCENARIO_PERIODIC of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: PROCESS_JOB_SCENARIO of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: IF_AGS_EJR_JSM_PROC_FPM_CTRL~AFTER_PROCESS_EVENT of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP

Hello,
This is the basic Job Scheduling functionality and not the Redwood Job scheduling, correct?
Have you performed the IMG Activiteis in SPRO?
See the following Help link:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Change a job
You can change the scheduling of a job as long as it has not been completed. Proceed as follows:
Make changes.
Note
When you change a periodic job, the system searches for the changeable successor and only changes this successor.
If there is more than one changeable job with the same name, the system does not change any of these jobs.
End of the note.
Save your entries.
To release the job in the target system, select Release.
You go to the transaction SM37 in the target system.
You just may want to ensure HTTP Services have been enabled. I realize you said the services workin SICF, but this needs to be verified as 500 Internal Server Error most often means the HTTP services are not activated.
Regards,
Paul

Error in Backup job scheduling in DB13

Hi All
Backup job scheduled in DB13 kicks error ,I am using Oracle as database and ERP6.0
database and application are on diffrent servers.Before it was working fine,I didn't changed any password
I can run backupjob sucessfully directly from BRtools on database server.Please provide any hint
Job started
Step 001 started (program RSDBAJOB, variant &0000000000060, user )
No application server found on database host - rsh/gateway will be used
Execute logical command BRBACKUP On host DLcSapOraG08
Parameters:-u / -jid INLOG20090120204230 -c force -t online -m incr -p initerd.sap -w use_dbv -a -c force -p in
iterd.sap -cds -w use_rmv
BR0051I BRBACKUP 7.00 (31)
BR0128I Option 'use_dbv' ignored for 'incr'
BR0055I Start of database backup: bdztcorv.ind 2009-01-20 20.42.31
BR0484I BRBACKUP log file: D:\oracle\ERD\sapbackup\bdztcorv.ind
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance ERD failed
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance ERD failed
BR0056I End of database backup: bdztcorv.ind 2009-01-20 20.42.32
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0291I BRARCHIVE will be started with options '-U -jid INLOG20090120204230 -d disk -c force -p initerd.sap -cds -w use_rmv'
BR0002I BRARCHIVE 7.00 (31)
BR0181E Option '-cds' not supported for 'disk'
BR0280I BRARCHIVE time stamp: 2009-01-20 20.42.33
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance ERD failed
BR0007I End of offline redo log processing: adztcorw.log 2009-01-20 20.42.32
BR0280I BRARCHIVE time stamp: 2009-01-20 20.42.33
BR0005I BRARCHIVE terminated with errors
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.33
BR0292I Execution of BRARCHIVE finished with return code 3
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished

Hi,
not sure if the recommendations given will address this issue.
You are getting this error:
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
the log file indicates:
> No application server found on database host - rsh/gateway will be used
This indicated that the user that is connecting from the AS to the DB server is not properly configured to perform the DB tasks on it.
So, first question would be to know if you have configured a gateway on the DB server and how, or if you are using remote shell.
Second question, you can do backups on the DB server.
> I can run backupjob sucessfully directly from BRtools on database server
How did you run exactly the backup job (what is the exact command line, what is the exact OS user that executed it)?
What is the OS of the DB server?
I have reread your post, your OS is windows therefore you fall in the "typical" error in Windows.
You have executed your backup as <sid>ADM and it works. Unfortunatelly, in windows, SAP is exectuted by SAPSERVICE<sid>, and this is the user who should be connecting to your DB server, and this is the user who cannot execute the backup.
The fact that you can run the backup with <sid>ADM in Windows does not means that you have SAPService<sid> properly configured.
For the error (see before) I think your ops$ user for this user is not properly configured in the DB server. take a look at the note mentioned by KT and pay attention to the SAPSERVICE<sid> configuration
Edited by: Fidel Vales on Jan 24, 2009 12:45 AM

Error in tabstrip control progtram while in Background job scheduling

Hi ABAPer's,
I need some help...I developed one tabstriip control program with 3 tabs. while excute it in foregroung it is executing nice..but while i am job scheduling the same program in background it was getting error's like .........
Control Framework: Fatal error - GUI cannot be reached
SET SCREEN not allowed in subscreens (screen: <Report Name> 0100)
so..if any body know the solution ...plz help me...
Thanks & Regards
Srinivas-SAP,

Hi,
please go through the functionality of tabstrips.
basically they are placed on tabstrips.
so they dont have their own ok codes and call screen and set screen ( to best of my knowledge )
can not be used.
if you are using set screen remove them.
even without using set screen if you are gettig the error, please let us know.
regards
Ramchander rao.K

Error occured while posting the job schedule for JDBCAdapter

Hi Experts,
In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
#J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
#Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
Frequently are created Lock's and I need remove them in Visual Admin.
Any idea about this error?
Tks in advance.

Hi,
After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
Any ideas?
Thanks in advance.

How to see DBMS_OUTPUT error when pl/sql proc runs in the EM job scheduler?

I have a pl/sql package that uses DBMS_OUTPUT to handle exceptions. When I run the package in sql*plus:
set serveroutput on;
begin
mypkg.myproc;
end;
and there is an exception, I see the output from my DBMS_OUTPUT.PUT_LINE.
However, when I use the job scheduler in Enterprise Manager... if there is an error, I do not see the output from my exception handling code (i.e., the output from DBMS_OUTPUT.PUT_LINE).

Using DBMS_OUTPUT to handle exceptions is generally not considered good form. At a minimum, you would want to log the exception to a table (or a file). If you are catching an exception that you cannot handle, you would really want to let that propagate back up to the caller so that Oracle knows that the job failed and can take appropriate action (i.e. retrying, not running dependent jobs, notifying a DBA, etc).
Justin

Errors in job scheduled SSIS package

A job scheduled for SSIS package failed with the below errors:
Microsoft (R) SQL Server Execute Package Utility Version 10.50.4321.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 5:00:02 AM
Error: 2015-01-02 05:06:39.25
Code: 0xC0202009
Source: Data Flow Task OLE DB Destination [46]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0"
Hresult: 0x80004005
Description: "Could not allocate a new page for database because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary
space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.". End Error Error: 2015-01-02 05:06:39.42
Code: 0xC0209029
Source: Data Flow Task OLE DB Destination [46]
Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (59)"
failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (59)" specifies failure on error. An error occurred on the specified object of the specified component. There may be
error messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:06:39.44
Code: 0xC0047022
Source: Data Flow Task SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (46) failed
with error code 0xC0209029 while processing input "OLE DB Destination Input" (59). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow
task to stop running. There may be error messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:06:39.48
Code: 0xC02020C4
Source: Data Flow Task Flat File Source [1]
Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
End Error Error: 2015-01-02 05:06:39.50
Code: 0xC0047038
Source: Data Flow Task SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned
error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error
messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:16:23.49
Code: 0x00000000
Source: Execute SQL Task 1
Description: Could not allocate space for object 'bo.TLE'.'PK_new' in database because the 'PRIMARY' filegroup is full. Create disk space
by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
End Error Error: 2015-01-02 05:16:23.70
Code: 0xC002F210
Source: Execute SQL Task 1 Execute SQL Task
Description: Executing the query "Sp_load" failed with the following error: "Warning: Null value is eliminated by an aggregate
or other SET operation.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 5:00:02 AM
Finished: 5:16:27 AM
Elapsed: 984.928 seconds. The package execution failed. The step failed.
Please help!!!!

Hi,
Based on the error message” Could not allocate a new page for database because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth
on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
As to the issue that the job executed successfully for the next run when executed, I think it can be caused by someone or something had made something to increase the space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Background job SWFSLSDLEX cannot be scheduled (error )"

Hi All ,
i got the following error ,
when i try to customize the SWU3 " Schedule background job for dead line monitoring ".
The error is :
"Work item -: Background job SWFSLSDLEX cannot be scheduled (error )"
And the Error log says :
Refer to your workflow system administrator.
The specified error number should indicate possible reasons for the error. It is possible that the system is in an inconsistent state. The scheduled start of the specified background job must be compared with the minimum date/time of all work items in table SWWDHMIN. It may be necessary to delete the scheduled background job by hand and reschedule it by calling report RSWWDHEX.
Apparently i dont see any table SWWDHMIN.
Thanks!
Richard A

The issue is solved by adding start profile and instance profile to operation modes.
Many thanks to my BASIS Guys for solving it !
Richard A

Background Job Scheduling

Hi,
I am scheduling a report to run in background.
In this report it is creating background jobs automatically for different company codes.
It submits the 1st background job and waits until it finishes.
Then 2nd job starts in background and continues with other jobs.
At end it finishes all the jobs and closes.
Now my problem is.
1.       Whether is it possible for us to submit all the jobs at 1 time. And execute at same time. Ie., 1st, 2nd job will start at same time.
2.       If possible how can we do that.
What I have written is
loop at companycode.
Create job name.
call fun 'Job_Open'.
submit xxxx user sy-uname via job job_name numer job_count
to sap-spool
spool parameters l_spool_parameter
without spool dynpro
with companycode
with ......
and return.
endloop.
Please help ASAP, urgent.

hi praveen,
Job Scheduling Explained
Definition
Before any background processing can actually begin, background jobs must be defined and scheduled. The scheduled time for when a job runs is one part of the jobs definition. There are several ways to schedule jobs:
From Transaction SM36 (Define Background Job)
With the "start program in the background" option of either Transaction SA38 (ABAP: Execute Program) or Transaction SE38 (the ABAP editor)
Through the background processing systems own programming interface. (Many SAP applications use the internal programming interface to schedule long-running reports for background processing.)
Through an external interface.
Scheduling Background Jobs
Use
You can define and schedule background jobs in two ways from the Job Overview:
·         Directly from Transaction SM36. This is best for users already familiar with background job scheduling.
·         The Job Scheduling Wizard. This is best for users unfamiliar with SAP background job scheduling. To use the Job Wizard, start from Transaction SM36, and either select Goto ® Wizard version or simply use the Job Wizard button.
Procedure
       1.      Call Transaction SM36 or choose CCMS ® Jobs ® Definition.
       2.      Assign a job name. Decide on a name for the job you are defining and enter it in the Job Name field.
       3.      Set the jobs priority, or Job Class:
·         High priority:      Class A
·         Medium priority: Class B
·         Low priority: Class C
       4.      In the Target server field, indicate whether to use system load balancing.
·         For the system to use system load balancing to automatically select the most efficient application server to use at the moment, leave this field empty.
·         To use a particular application server to run the job, enter a specific target server.
       5.      If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
       6.      Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
       7.      Define the jobs steps by choosing Step, then specify the ABAP program, external command, or external program to be used for each step.
       8.      Save the fully defined job to submit it to the background processing system.
       9.      When you need to modify, reschedule, or otherwise manipulate a job after you've scheduled it the first time, you'll manage jobs from the Job Overview.
Note: Release the job so that it can run. No job, even those scheduled for immediate processing, can run without first being released.
Specifying Job Start Conditions
Use
When scheduling a background job (either from Transaction SM36, Define Background Job or CCMS ® Jobs ® Definition), you must specify conditions that will trigger the job to start.
Procedure
Choose the Start condition button at the top of the Define Background Job screen.
Choose the button at the top of the Start Time screen for the type of start condition you want to use (Immediate, Date/Time, After job, After event, or At operation mode) and complete the start time definition in the screen that appears.
For the job to repeat, check the Periodic job box at the bottom of the Start Time screen and choose the Period values button below it to define the frequency of repetition (hourly, daily, weekly, monthly, or another specific time-related period). Then choose the Save button in the Period values screen to accept the periodicity and return to the Start Time screen.
Once youve completed specifying the job start conditions, choose the Save button at the bottom of the Start Time screen to return to the Define Background Job screen.
No job can be started until it is released, including jobs scheduled to start immediately. Since releasing jobs can be done only by a system administrator from the job management screen (Transaction SM37) or by other users who have been granted the appropriate Authorizations for Background Processing, no unauthorized user can start a job without explicit permission
Managing Jobs from the Job Overview
Use
The Job Overview, or Job Maintenance, screen is the single, central area for completing a wide range of tasks related to monitoring and managing jobs, including defining jobs; scheduling, rescheduling, and copying existing jobs; rescheduling and editing jobs and job steps; repeating a job; debugging an active job; reviewing information about a job; canceling a job's release status; canceling and deleting jobs; comparing the specifications of several jobs; checking the status of jobs; reviewing job logs; and releasing a job so it can run.
Procedures
To display the Job Overview screen, choose CCMS ® Jobs ® Maintenance or call Transaction SM37. Before entering the Job Overview screen, the system first displays the Select Background Jobs screen. You'll need to complete this Job Selection screen to define the criteria for the jobs you want to manage. Once you've selected jobs to manage, you can choose from a wide range of management tasks:
To copy a single existing job, choose Job ® Copy.
To reschedule or edit job steps or attributes of a single job, choose Job ® Change. A job step is an independent unit of work within a background job. Each job step can execute an ABAP or external program. Other variants or authorizations may be used for each job step. The system allows you to display ABAP programs and variants. You can scan a program for syntax errors. You can also display the authorizations for an authorized user of an ABAP job step.
To repeat a single job, choose Job ® Repeat scheduling.
To debug an active job, choose Job ® Capture: active job. Only a single selection is allowed. If an active job seems to be running incorrectly (e.g., running for an excessively long time), you can interrupt and analyze it in debugging mode in a background process, and then either release it again or stop it altogether.
You will be able to capture a background job only if you are logged on to the SAP server on which the job is running. To find server information in the Job Overview, select and mark the job, then choose Job ® Job details.
To review information about a job, choose Job ® Job details. Details displayed can include:
current job status
periodicity, or the repetition interval
other jobs linked to the current job, either as previous or subsequent jobs
defined job steps
spool requests generated by the current job
To cancel a job's "Released" status, select the job or jobs from the Job Overview list and choose Job ® Release -> Scheduled.
To cancel a job from running but keep the job definition available, select the job or jobs from the Job Overview list and choose Job ® Cancel active job.
To delete a job entirely, select the job or jobs from the Job Overview list and choose Job ® Delete. Jobs with the status of Ready or Running cannot be deleted.
To compare the specifications of more than one job, select the jobs from the Job Overview list and choose Job ® Compare jobs.
To check the status of jobs, select the job or jobs from the Overview Job list and choose Job ® Check status. This allows you to either change the job status back to Planned or cancel the job altogether. This is especially useful when a job has malfunctioned.
To review job logs, select a job or jobs with the status Completed or Canceled from the Job Overview list and
regards
karthik
reward me points if helpfull

Job scheduling failed because the user has no permission to access this rep

Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.

Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER

SSIS Package compiled successful, in SQL Server Integration Service package executed sucessful, But fail to run in MS SQL Job Scheduler

Hi Everyone,
I having a problem to transfer data from MS SQL 2005 to IBMAS400. Previously my SSIS was running perfectly but there is some changes I need to be done in order for the system to work well. Considers my changes are minimal & just for upgrades (but I did
include DELETE statements to truncate AS400 table before I insert fresh data from MS SQL table to the same AS400 table), so I compile my SSIS package & it run successfully & I passed it into MS SQL Integrated Service as 1 of the packages & manually
executed the package & the result is the same, that mean it was successful again but when I try to run it in a MS SQL Job Scheduler, the job failed with these message shown below as extracted from the job View history.
Date today
Log Job History (MSSQLToAS400)
Step ID 1
Server MSSQLServer
Job Name MSSQLToAS400
Step Name pumptoAS400
Duration 00:00:36
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: MSSQLServer\SYSTEM. ... 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: today time
Error: on today time
Code: 0xC0202009 Source: SSISMSSQLToAS400 Connection manager "SourceToDestinationOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
Source: "IBMDA400 Session"
Hresult: 0x80004005
Description: "CWBSY0002 - Password for user AS400ADMIN on system AS400SYSTEM is not correct ". End Error
Error: today
Code: 0xC020801C
Source: Data Flow Task OLE DB Destination [5160]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationClearData" failed with error code 0xC0202009. There may be error messages posted before
this with more information on why the AcquireConnection method ca... The package execution fa... The step failed.
So I hope somebody can shed some hints or tips for me to overcome time problem of mine. Thanks for your help in advance. As I had scoured thoroughout MSDN forums & found none solution for my problem yet.
PS: In the SQL Integrated Services when I deployed the package I set the security of the packages to Rely on server...
Hope this will help.

Hi Ironmaidenroxz,
From the message “Executed as user: MSSQLServer\SYSTEM”, we can see that the SQL Server Agent job ran under the Local System account. However, a Local System account doesn’t have the network rights natively, therefore, the job failed to communicate with
the remote IBMAS400 server.
To address this issue, you need to create a proxy account for SQL Server Agent to run the job. When creating the credentials for the proxy account, you can use the Windows domain account under which you executed the package manually.
References:
How to: Create a Credential
How to: Create a Proxy
Regards,
Mike Yin
TechNet Community Support

Job Scheduling error

Similar Messages

Maybe you are looking for