Job steps configuration details
Hi
I have Job process name and i want to know steps of that job.
how can i found them.
please provide me the details
Thanks
shankar
Hi,
Go to SM36 transction.Input the job name.click on steps. u will find the details of that job in sm36.
Similar Messages
-
How to find all the SM37/36 jobs, created user and step user details
Hi Gurus,
Is there any table or transaction is available to check all the SM37/36 jobs that are running in the system, details of created user and step user in single screen?.
Regards,
SrinivasCheck the below tables
TBTCP Background Job Step Overview
TBTCO Job Status Overview Table
TBTCJSTEP Background Job Step Overview
TBTC_SPOOLID Background Processing Spool IDs Table
TBTCS Background Processing: Time Schedule Table -
SQL Server Agent Job Failing on Job Step
Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
BradI am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!! -
SSIS - Change Config File Path LOCATION in SQL Agent Job Step (NOT USING DTEXEC)
SSISers;
I am not new to ssis but am trying to deal with promoting of ssis config files differently for a specific project. We are using SQL 2008 R2.
As a standared pattern used for years, we just use SQL Agent, build a job step for the ssis package, add the ssis package as SQL Integration Services Package type from fileshare (not using Integration Services), and add the necessary production
config files in the configutation tab of the job step. Easy. We do not execute our packages with DTEXEC command line.
A new project has the developers leaving the config files in the package - not removing the config files for deployment. Is there a way to override JUST THE CONFIG FILE PATH LOCATION in the job step for ssis package? Remember, we are NOT using dtexec.
I was told that /SET might do it but I do not see a good example anywhere of hooking this in and how it works for a CONFIG FILE PATH LOCATION - I see variable overrides but not CONFIG FILE PATH LOCATION. The packages were written with Absolute config file
path and not Relative path.
Please understand that my goal is to let them leave the packages as is, we move the config files to the production sever and all we have to do is flip the location of where the config files are sitting for the ssis pacakge to look for them. We would
rather NOT have to use DTEXEC command line with the job step for reasons that I do no need to get into on this forum.
Any suggestions are appreciated.Hi mg30,
There is no way to overwrite the XML configurations file just through modifying the SQL Server Agent job steps. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command
lines or other package configurations configured in the job step.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations
or modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
If I setup a job step to run a package and set the config file location on the "Configurations" tab, will that override the config file that the SSIS package is configured to use? Or is this a "cumulative" type configuration option?
I typically have my config file mixed in with my project files, but that path wont exist on the server.Hi Shiftbit,
ETL vs ELT is right.
In SSIS 2005, the DTExec utility loads and runs the package, events occur in the following order:
The package file is loaded.
The configurations specified in the package at design time are applied in the order specified in the package (except for Parent Package Variables).
Any options specified from the command line are applied. Any configurations specified on the command line overwrite the current values; however, they do not trigger a reload of the configurations if a changed value impacts a configuration dependency. For
example, if the connection string used for SQL Server configurations is updated from the command line at run time, the package will still retain any other values from the design-time SQL Server configuration database.
Parent Package Variable Configurations are applied.
The package is run.
In SSIS 2008 and higher, utility loads and runs the package, events occur in the following order:
The dtexec utility loads the package.
The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations
only once and later in the process.)
The utility then applies any options that you specified on the command line.
The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line
options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location.
The utility applies the Parent Package Variable configurations.
The utility runs the package.
So, we can see that no matter we use SSIS 2005 which applies the Configurations once or use SSIS 2008 (or higher) which applies the configurations twice, the configurations specified in the command line will affect and not be overwritten by the configurations
specified at design-time.
Reference:
http://technet.microsoft.com/en-us/library/ms141682(v=sql.110).aspx.
Regards,
Mike Yin
TechNet Community Support -
Hi,
I have a SQL Agent Job that executes an SSIS package. However when I manually execute the SQL Agent job from SSMS I get the following seemingly common error:
"Non-SysAdmins have been denied permission to run DTS Execution job steps without a proxy account."
However, the job owner is a member of both the SQL SysAdmin role, and also a member of the operating system's Administrators group.
The SQL Agent Service is running under Local Service (not something within my control unfortunately).
I have found many posts suggesting setting up a proxy account etc, but that seems to be for the case where the job owner is not a sys admin. To be clear, the job owner IS a sysadmin.
This is occurring in the Production environment. I have two other, seemingly identical environments that are working fine, so i am wondering if I have missed something obvious.
Any idea what I've missed?
details:
Windows Server 2008 R2 Standard
SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64) Enterprise Edition
Note - the jobs were migrated to the broken environment by scripting them from Env 1, with If exists, drop, create etc.
Thanks
Guy
GuyObviously, as soon as I post this I figure out the issue:
In the script i had provided for migrating the job to the new environment (to which I have no access) the DBA replaced the @owner_login_name value with a different login. The account he used does have SysAdmin privileges but for some reason
changing the account in the script did not correctly update in the job.
On opening the job in SSMS it appeared to have the correct owner account, but using GUI to look up the specific account and adding it this way, while appearing to make no difference, has in fact solved the problem.
My assumption therefore is that updating the @owner_login_name when scripting the job is not the same as actually editing the job owner itself.
Guy
Guy -
Based on the below thread I am working on a JDBC Scenario.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
The database I am using is a freeware. Now what are all the configuration details needed to fill my JDBC adapter, how to get that from my DB
Thanks.Hi Jenin,
The below is the exmaple of MS-Sql similarly u can configure with ur freeware database <go to their site>
Must see
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
After you install the driver you use the Sender or Reciver JDBC adapter to connect to the database.
The parameters in the JDBC adapter,
If you have already deployed the drivers (msbase.jar, mssqlserver.jar, msutil.jar).
Driver:
com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection for MS SQL Server:
jdbc:microsoft:sqlserver://<server>:1433;databaseName=<dbname>
If you are using the new SQL Server 2005 jdbc driver (sqljdbc.jar). Setup is basically the same, except the driver is now:
com.microsoft.sqlserver.jdbc.SQLServerDriver
And the URL is slightly different as well:
jdbc:sqlserver://host:1433;DatabaseName=name
<b>
***reward points if helpful
</b><a href="/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30:///people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Message was edited by:
Ajay Kumar -
We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
Private ReadOnly Property ReportId() As Integer
Get
Return Integer.Parse(Me.Request.QueryString("r"))
End Get
End Property
Private Property CacheKey() As String
Get
Dim sCacheKey As String = Me.Request.QueryString("ck")
If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
sCacheKey = CStr(Me.ViewState("CacheKey"))
End If
Return sCacheKey
End Get
Set(ByVal Value As String)
Me.ViewState("CacheKey") = Value
End Set
End Property
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not Me.IsPostBack Then
LoadReport()
End If
End Sub
Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
'Redirect to the PDF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
'Redirect to the RTF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
'Redirect to the Excel Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
LoadReport()
End Sub
Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
LoadReport()
End Sub
Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
LoadReport()
End Sub
Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
LoadReport()
End Sub
Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
LoadReport()
End Sub
Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
LoadReport(True)
End Sub
Private Sub LoadReport()
LoadReport(False)
End Sub
Private Sub LoadReport(ByVal bRefresh As Boolean)
If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
Common.Settings.OverrideCompany = TypedSession.OverrideCompany
End If
'Get the report data
Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
'If there is data to display bind it to the Crystal Viewer
If dtReport.Rows.Count > 0 Then
With m_oReportDocument
.Load(ReportHelper.GetReportPath(Me.ReportId))
.SetDataSource(dtReport)
.PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
End With
crvMain.ReportSource = m_oReportDocument
Else
'Hide the controls and display a message if there is no data
crvMain.Visible = False
btnPDF.Visible = False
btnExcel.Visible = False
lblNoResults.Visible = True
End If
End Sub
Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
m_oReportDocument.Close()
m_oReportDocument.Dispose()
End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
ThanksI suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Message
Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
by PowerShell is: 'Security error. '. Process Exit Code -1. The step failed.
I receive this error during the sql server job 'syspolicy_purge_history' execution when sql server got upgraded form SQL Server 2008 to 2014.Hi Vishnu,
According to the error message, it also occurs in SQL Server 2012. Here is a feedback about the error in the link below.
https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
blog.
HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
Thanks,
Lydia Zhang -
Step by Step configuration for Shipment cost Calculation
Hi Gurus,
Does anybody have the step by step configuration guide for Shipping, Transportation & Shipment Cost Calculation. I am new to this functionality. My email id [email protected]
Thanks in advance
Regards
MahendraHi MAhendra,
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Logistics  Logistic Execution  Transportation Transportation Planning  Create  Single document
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Logistics  Logistic Execution  Transportation Shipment cost  Create  Single document
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select hte line item and double click it.
Go as main menu: Itme --> Acc. assignment, You enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Reward points if it helpful
Regards
Govind. -
Cloud Control 12c: Configuration Details Error
Hi,
I'm currently in the process of installing the Oracle Enterprise Manager Cloud Control 12c, after typing the configuration details (step 5 of 8), I get an error popup window stating the following:
The following prerequisite check failed because the ORacle Database, where the Management Repository will be configured, does not meet the configuration requirements. Fix the issue manually base on the recommendation offered for this prerequisite, and click OK. For more details check the logs: /oraInventory/logs/emdbprereqs
Prereq Name:
Check the compatible instance prarameter value.
Recommendation:
The compatible instance parameter must be set to the same version value as the database instance of the EM repository.
When I check the repos_perf.log, I see the following fails:
Executing Prereq Action
executing Action: select count(*) from v$log where 300000000 > bytes
output: 3
Prerequisite failed
Running component repos_perf Done
Executing component :repos_perf
Running component repos_perf Done
How can I set parameter?
Thanks,
OlivaresHi Olivares,
Assuming your question is about setting the compatible initialization parameter, you can connect to the repository database (e.g. using sqlplus as user system or sys) to execute the following command, then restart the database:
ALTER SYSTEM SET COMPATIBLE = <value> SCOPE=SPFILE;
EX:
ALTER SYSTEM SET COMPATIBLE = '11.2.0.0.0' SCOPE=SPFILE;
If necessary, see the following doc for guidance on the parameter value:
http://docs.oracle.com/cd/E24628_01/install.121/e22624/appdx_about_emprereqkit.htm#CIHHBGFD
Regards,
- Loc -
Hi All,
Is there any FM or table to check the status of each job step??
I mean while my job is executing i want to check the of the job step that has finished execution.
For e.g. If Job A having 3 steps is running.Step 1 has completed execution and Step 2 has started. At this point i want to chck the status of Step 1 and accordingly send mail to people.
How can i achieve this.?
Its Urgent...
Answers will be rewarded.
Regads,
RohanHi Rohan,
The information about back ground jobs are stored in table <b>TBTCO</b>.
field STATUS denotes the status ( A - failed, F - complete , R - active )
The primary key for this table is job name ( including the step )
Check this table for more details. -
Problem creating job steps variants
Hi Gurus!
I have a problem with job steps creation.
In my program I need to copy the exist job with some condition accords to job steps variants.
But when I create the new job and it steps and variants in SM37, I can not see the variants names, only number.
For example in template that I am copying it looks like that:
No. Program name/command Prog. type Spool list Parameters User Lang.
1 RMCVNEUA ABAP BW_TEMPLATE aaa EN
But in job that I create it is:
Program name/command Prog. type Spool list Parameters User Lang.
RMCVNEUA ABAP &0000000000271 ddd EN
How can I create steps with variant names instead of numbers/indexes? BW_TEMPLATE instead of &0000000000271.
My code:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = lv_jobname
sdlstrtdt = lv_date
sdlstrttm = lv_time
IMPORTING
jobcount = lv_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
SUBMIT (ps_tbtcp-progname) VIA JOB pv_jobname NUMBER pv_jobcount
USING SELECTION-SET ls_cat-variant
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = lv_jobcount
jobname = lv_jobname
direct_start = lv_imm_run
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9
Edited by: Dani_K on Oct 27, 2010 4:35 PMNo any suggestions?
-
Pass value from SQL agent job step
Hi
I have created one SSIS package and I am scheduling the same using SQL Agent job. Now I want to pass one value from SQL job agent and want to use that value in SSIS package and then run that package. Can someone point to the solution.
Aniruddha http://aniruddhathengadi.blogspot.com/I have created one parameter on SSIS package named strValue and assigned a empty value "". After that I have created one SQL job and step wherein I have set the value to "Nike" for parameter under Parameters tab.
Now I am expecting Nike value which I have set on SQL job step should get reflected on SSIS package when I am running my job. Am I doing anything wrong ?
Aniruddha http://aniruddhathengadi.blogspot.com/
Not sure what's going wrong but you can have quick look at below step by step tutorial:
Parameterizing Connections and Values at Runtime Using SSIS Environment Variables (via SQL Agent)
Cheers,
Vaibhav Chaudhari -
Hi,
I have 3 steps in my job. I want to check the status of each job step and if that job step fails , send email to certain people.
How do i go abt doing abt it??
In table TBTCP -- it gives the status of each job step as 'P' ie scheduled even for the finished ones... so i cant get correct data from TBTCP.
Is der any FM implementing the same??
Its Urgent.
Answers will be rewarded,
regards,
RohanHi Rohan,
Instead of creating the stpes, why don't you create the Job after completing the Fisrt job and for the Third Job select after completion of the Second job, so that you will get the Status in TBTCP table from there you can write the code to send the email
Regards
Sudheer
Maybe you are looking for
-
Dbms_metadata.get_ddl
Hi I am having issues running this oracle package within a stored procedure. I can get the code to work within a select statement. I can even get it to work within a declare/begin/end statement but as soon as i put it in a SP i get the following erro
-
OAS, Linux, CMAN and Oracle 9.2.0.7
Greetings All: We are running Oracle 9.2.0.7 on RHES3 and I have been told by our dba that we cannot run Oracle Advanced Security (OAS) with SSL because of incompatibilities mentioned on Metalink notes Note 166492.1 and Note 331125.1. I do not have M
-
DataSource - difference between ejb-location and location
Hi, Does anyone know difference between ejb-location and location attribute specified in datasources.xml for an emulated datasource. There are few connection leakage errors reported in log files though the connection and other database objects have b
-
Speech Feedback Window Doesn't Appear
In the beginning, speech recognition worked with some commands, but simply didn't respond to most others. Then the speech commands window suddenly emptied itself. I got a temporary fix for that problem, but now I find that the speech feedback window
-
How do I convert pdf to Word for Mac?
I just purchased the Adobe Export Pdf. The pdf files upload to the cloud, I select Word docx, and the conversion to WordMac fails. Please advise.