SQL Server upgradation Issue : 2012 to 2014. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job.

Message
Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
by PowerShell is: 'Security error.  '.  Process Exit Code -1.  The step failed.
I receive this error during the sql server job 'syspolicy_purge_history' execution  when sql server got upgraded form SQL Server 2008 to 2014.

Hi Vishnu,
According to the error message, it also occurs in SQL Server 2012.  Here is a feedback about the error in the link below.
https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
blog.
HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
Thanks,
Lydia Zhang

Similar Messages

  • SQL Server Upgrade Advisor 2014 - Database Compatibility Level checking

    I have the following scenario... I have a database server running SQL Server 2008 R2 (10.50.4260). On that server I restored a database from SQL Server 2005.  Looking at the compatibility level through the properties of the database (using SSMS) and
    by querying against sys.databases, I can see the database has the compatibility level of 90, which is what I expected.
    In looking to bring this database over to a SQL Server 2014 database server, I have run the SQL Server Upgrade Advisor 2014 tool as well as the SQL Server Upgrade Advisor 2012 tool.  With the 2014 tool, my expectation would be that it would warn me
    that the compatibility level will be upgraded to 10 (or something), however, I received no such warning.  I ran the 2012 version of the tool as well, expecting that I might get a deprecation warning (or something), no such luck.  I have run the 2014
    tool from my computer and from another one, same results.
    Does the upgrade advisor not check for the compatibility level? Or does my configuration maybe have something to do with it (having it on a 2008 R2 server)?  From looking at screenshots of when other people have ran the tool, I was under the impression
    it checked this. See the link below for an example...
    http://blogs.msdn.com/b/mspfe/archive/2012/12/06/sql-server-upgrade-advisor-considerations-when-upgrading-from-sql-2000-to-sql-2012.aspx
    Thoughts anyone?

    Lydia,
    I agree with regards to the 2012 version.  However, in SQL Server 2014, upgrading a database with a compatibility level of 90 sets
    the database to compatibility level 100. See link below...
    https://technet.microsoft.com/en-us/library/bb510680.aspx
    Shouldn't the 2014 version of the advisor tool issue the same warning seen in the screenshot of the msdn blog post we both mentioned?  As in... "After upgrade, compatibility levels <list of levels>, will be set to 100".
    Hi JJordheim,
    According to my test, SQL Server 2014 Upgrade Advisor also only raise warning when database compatibility level is less than 90 in the “SQL Server Parameters” page.
    From your description, when database compatibility level is set to 90, SQL Server 2014 Upgrade Advisor should also raise warning, right? If so , this is a design issue of SQL Server 2014 Upgrade Advisor, personally, I recommend you
    submit a feedback to the Microsoft Connect at this link
    https://connect.microsoft.com/SQLServer/Feedback . Your feedback enables Microsoft to offer the best software and deliver superior services.
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP)

    Hi All,
    Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
    Thanks & Regards,
    Allen

    Hi All,
    Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
    Thanks & Regards,
    Allen

  • Anyone else having issues writting string "memo" fields to Access 2007-2010 or SQL Server Express 2008-2012?

    I have a data cluster that I am working to write to either Access 2007 thru 2010 and/or SQL Server Express 2008 thru 2012 all on a Windows 7 64 bit OS. Some of the elements are long strings that I put delimited data for the raw trace data. The fields can be 10's of KB long. With Access I cannot stuff any string >255char into the memo field. With SQL Server Express 2008R2 - 2012 I found that if the strings are >32767 they again fail to fill the memo fields. The Access write or reads work fine otherwise, just not the listed offending fields in the cases mentioned.  Anyone else having the issue or a solution?

    If the long string field has repetitive data, you might be able to compress it using GZIP to reduce it's size below the 32K limitation you mentioned.
    GZIP compress/uncompress of string using .NET
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • Can i use sql server express 2008, 2012, and 2014 for commercial purpose?

    Good day,
    I saw that the sql server express 2005 can be used for commercial purpose without buying additional license
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8df18025-fc2b-43c2-8476-532336ff09e3/sql-server-express-for-commercial-use?forum=sqlexpress
    the question is can I do the same for sql server express 2008,2012, and 2014?
    can I install and use sql server express 2008, 2012 and 2014 on an azure vm? specifically
    http://azure.microsoft.com/en-us/pricing/details/virtual-machines/
    A0 instance
    just an off topic question, is it required to pay to use sql server on virtual machines?
    why is there a different pricing here
    http://azure.microsoft.com/en-us/pricing/details/virtual-machines/#Sql

    Hello,
    Yes, you can use all versions SQL Server Express for commercial use. Please read more resources about it.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/01dbc5c3-b5fe-42d4-9eb9-91683cf8285b/can-any-commercial-application-that-uses-sql-server-express-freely-redistribute-the-sql-server?forum=sqlexpress
    https://social.technet.microsoft.com/Forums/en-US/661ebf2e-ff2f-4dae-a8ae-e2179a764c09/sql-server-2012-express-in-commercial-product?forum=sqlexpress
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Steps SSIS and SSAS Migration from sql server 2005 to 2012?

    steps SSIS,SSRS and SSAS Migration from sql server 2005 to 2012? any precautions to take while migration.
    any documentation or any specified steps.

    Hi Vijay,
    According to your description, you want to migrate SQL Server Integration Services and SQL Server Analysis Services from SQL Server 2005 to SQL Server 2012.
    For how to migrate SQL Server Integration Services, please refer to the article:
    http://www.bidn.com/blogs/DevinKnight/ssis/2718/upgrading-packages-to-ssis-2012.
    In addition, since the issue regards SQL Server Integration Services. I suggest you post the question in the SQL Server Integration Services forums at
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices.
    For how to migrate SQL Server Analysis Services, please refer to this article:
    http://www.codeproject.com/Articles/435703/Migration-from-SQL-server-to.
    In addition, since the issue regards SQL Server Analysis Services. I suggest you post the question in the SQL Server Analysis Services forums at
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices. It is appropriate and more experts will assist you.
    Regards,
    Michelle Li

  • Required info on SQL Server Performance Issue Analysis and Troubleshoot way

    Dear All,
    I am going to prepare the simple documentation steps on SQL Server Performance Issue Analysis and troubleshoot method. I am struggling to make this documentation since we have different checklist (like network latency,disk latency, memory/processor pressure,SQL
    query tuning etc) to validate once application performance issue reported from the customer.So, I am looking for the experts document or link sharing .
    Your input will help for document preparation in better way.
    Thanks in advance.

    Hi,
    Recommendations and Guidelines on configuring disk partitions for SQL Server
    http://support.microsoft.com/kb/2023571
    Disk and File Layout for SQL Server
    https://blogs.technet.com/b/dataplatforminsider/archive/2012/12/19/disk-and-file-layout-for-sql-server.aspx
    Microsoft SQL Server 2012 Performance Tuning: Implementing Physical Database Structure
    http://www.packtpub.com/article/sql-server-2012-implementing-physical-database-strusture
    Database Mirroring Best Practices and Performance Considerations
    http://technet.microsoft.com/en-us/library/cc917681.aspx
    Hope the information helps.
    Tracy Cai
    TechNet Community Support

  • SQL Server Management Studio 2012

    Hi Team,
    I have installed trial version of SQL Server management Studio 2012 .Initially I was able to connect to SQL Server Management Studio ,then after I have installed Visual Studio 2013 for web (trial version).Two days later ,On trying to open SQL Server Management
    Studio ,It shows an error that says "Invalid License Data,Reinstall is required ".
    Even on reinstalling with new set of downloaded files ,I could face the same issue .
    Kindly give appropriate solution to resolve this issue .
    OS:Windows 8 (64 bit )

    Please see this url:
    SQL 2012 - Invalid License Data
    T-SQL Articles
    T-SQL e-book by TechNet Wiki Community
    T-SQL blog

  • SQL Server Connection Issue

    I've tried going through the steps to resolve the issue, but I am still coming up blank. The part that I am not understanding is the, "A non-recoverable error occurred during a database lookup." part.
    Is this a security problem? I can establish an ODBC connection to the server as well as connect and query through visual studio, however when trying to run it through one of our custom programs, it throws this error message. 
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    TCP Provider, error: 0 - A non-recoverable error occurred during a database lookup.)

    There are many reasons of SQL server connectivity issue. Refer checklist to find out the real cause of connectivity issue.
    1. Check SQL services are running
    2. Check SQL Browser service is running
    3. Check remote connections are enabled
    4. Network connectivity between database & application servers by TRACERT command
    5. Check TCP/IP protocol enabled at SQL server
    6. Check talent connectivity – telnet <IP address> <port no on SQL server running>
    7. Check UDP port 1434 is open or not on SQL Server
    8. Check firewall is running or not Check
    9. If firewall running, SQL Server & UDP port must be added in exception in firewall
    10. Run SQL Discovery report on machine SQL server installed, to check you are using correct instance name to connect( default \named) -http://mssqlfun.com/2013/02/26/sql-server-discovery-report/
    http://mssqlfun.com/2012/09/28/check-list-for-sql-server-connectivity-issue/
    Regards,
    Rohit Garg
    (My Blog)
    This posting is provided with no warranties and confers no rights.
    Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • MS SQL Server visual studio 2012

    i'm using MS SQL Server visual studio 2012 to biuld naive bayse model
    after that i waint to connect the model to asp.net
    how ? ??

    Hello,
    You can use ADOMD.NET (Microsoft.AnalysisServices.AdomdClient
    namespace) to connect to Analysis Services and to query cubes and also data mining models.
    See Developing with ADOMD.NET and
    ADOMD.NET Client Programming
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Can I Install SQL Server Developer Edition 2012 on Windows 8

    I am just about to buy this:
    http://www.amazon.com/SQL-Server-Developer-Edition-2012/dp/B007RFXQAM
    I noticed that the 2 platforms listed are Windows 7 & Vista.  I'm pretty sure it will also run fine on Windows 8, based on what I read here:
    http://msdn.microsoft.com/en-us/library/ms143506.aspx
    I'm wondering if anyone has actually installed SQL Server Developer Edition 2012 on Windows 8.
    Thanks!!
    Ryan Shuell

    Yes, absolutely. It is fully compatible and supported. And you already have the official link :)
    This posting is provided “AS IS” with no warranties, and confers no rights.
    If this reply answers your question, please mark it as Answered for others to find it easily.
    If this reply help you resolving the problem, please vote the post as Helpful.

  • SQL Server Connectivity Issues

    Hi,
    I am getting the below error intermittently. On the Database server, CPU, Disk I/O, and Network all look fine.
    Any suggestions on where to track what may be causing this issue? Thanks!
    The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The wait operation
    timed out.) ---> System.ComponentModel.Win32Exception: The wait operation timed out
    Thanks.

    Hi,
    Restarted the server 5days ago but getting these connection issues each day since and for a couple of weeks before restart.
    Apps connecting are .Net and using Entity Framework, but occasionally I get the connection error when attempting to connect through SSMS.
    Full error below...
    Error Checking Previous SignOffs
    System.Data.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) ---> System.ComponentModel.Win32Exception: Access is denied
    --- End of inner exception stack trace ---
    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
    at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
    at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
    at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
    at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
    at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
    at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
    at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
    at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
    at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
    at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
    at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
    at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
    at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
    at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
    at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
    at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
    at System.Data.SqlClient.SqlConnection.Open()
    at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure)
    --- End of inner exception stack trace ---
    at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure)
    at System.Data.EntityClient.EntityConnection.Open()
    at System.Data.Objects.ObjectContext.EnsureConnection()
    at System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
    at System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator()
    at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
    at Checks.CheckFundsNotSignedOff(String ID, DateTime accPeriod, Levels level)
    at GeneralView.CheckPreviousSignOffs(String selectedID, Levels selectedLevel)
    Thanks.

  • My Apple TV is slow and disconnects after the latest update (5.1). It seems to effect both home sharing and through the net. Is there a known problem?

    My Apple TV is slow and disconnects after the latest update (5.1). It seems to effect both home sharing and through the net. Is there a known problem?

    Hi Scott.
    There is a problem - but Apple have not acknowledged it. Many people on these forums are experiencing the same issue.
    To get something done, you should report it here. The more of us that tell Apple about it, the more likely they are to fix it. You could also send a short email headed 'Apple TV update problems' to
    <Email Edited by Host>

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

    The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

    Reboot the modem. Just pull the power for a few seconds. No settings are lost.  The laptop getting through to the internet is not relevent.

Maybe you are looking for