JoinFieldValue Revenue Record Type

I have been trying to either create a workflow, or enter a Default Value, on a custom field under Opportunity.
I am trying the following JoinFieldValue('<Revenue>',[<OpportunityId>], '<Custom_Qty>') <--There are brackets around <OpportunityId>, just not displaying in thread.
I got the syntax and record type from the online help, but I am getting an error "Field name ‘Revenue’ is invalid(SBL-SBL-00000)".
We are using Revenue Record Type.
Can someone please assist?
Thanks!

CRMOD has contacted me back and says that Revenue is not available for JoinFieldValue, but the online help file shows otherwise. Anyone else see that they do have Revenue listed under the Record Type?
https://secure-ausomxdsa.crmondemand.com/docs/1.10.0.1080.0.00/enu/help/index.htm?toc.htm?ebjoinfieldvaluehelp.html
not sure if you will be able to get to the link above, but that is the documentation that I am looking at.

Similar Messages

JoinFieldValue for Account record type.

I am trying to validate Account record type field using below JFV function. Will this work,
JoinFieldValue('<Opportunity>', '<OpportunityId>', '<IndexedPick0>') <> 'Yes' , display customer error message.
Sundar

thanks for reply..
I have field "Result" (IndexedPick0) in opportunity. User can modify Account type to Customer only if associated opportunity Result is "Yes - Pick Up". otherwise display customer error message. To configure this, I want to get opportunity Result field value using JVF and display error message.
JoinFieldValue('<Opportunity>', '<OpportunityId>', '<IndexedPick0>') <> 'Yes - Pick Up' in Account Type field

Auto-populating fields based on another field (must access dif record type)

This is a long one. I basically want to know if it's possible to have several fields auto-populated based on the data in another. It gets a little tricky here, because the information I want to auto-populate will have to be searched for in another record type. An example will hopefully make my request clear:
I have 10's of thousands of records of the "Product" record type that each have a product number. Well, let's say I have several fields to enter into an "Opportunity" record type, based on the information for this product number in the "Products" record type. I want to know if I can enter the product number on the "Opportunity" record, and have OnDemand go look up this product number in the "Product" record type, pull information from that record, and auto-populate that additional information in certain fields back on the "Opportunity" record that I am entering information for.
I know a workflow can do this on simple things where you have a few different part numbers and can create a workflow for each, but I literally have 40k part numbers, and I can't very well create that many workflows. If there was a way to dynamically script the workflow to use the part number in the field on the "Opportunity" record and go fetch the data to auto-populate, that would be nice.
I also can't use a cascading picklist because, again, there are around 40k products records and picklists have a limit to how many choices you can have.
My think tank has run empty, and I am out of ideas. I was wondering if there is any other way to get this done, or if it's even possible?
Thanks,
B
Edited by: user10885599 on Feb 5, 2009 11:54 AM

As I read this, I am wondering if you would be able to use the new JoinFieldValue() function to update the fields. The problem is that the Opportunity record does not have a direct link to products. The Revenue table does however, so you should be able to do this from Revenue, if that is how you are using the application.
The process would be to create a workflow that watches for new Revenue records, and updates the new fields in the Revenue object using the JoinFieldValue function to pull the data.

Book Assignment based on Product Revenue Record

I am trying to figure out a way to assign opportunities to product books based on the product selected in the product revenue field. You can select Revenue as a record type and select the product name as part of the condition. And then assign "revenue" to a book. But I am confused since revenue is part of the oppty record are you assigning the oppty to the book or are you actually assigning just the revenue portion.
Any help will be appreciated.
Thanks,
Caryn

Caryn, are you trying to use workflow to assign
Opportunities to a book based on the associated
Revenue Products? Yes
If I have 2 different product revenue records on an opportunity for product A and product B. I would like the opportunity added to the product A book and product B book. I am trying to accomplish visibility rights for the product line managers in Marketing.

How to create a LookUp field, selecting a value from another record type ??

Hello all,
I am looking to create a new field in Opportunity in CRM On Demand where we can give the user an option to select one of the records. Data in this search applet should come from another Record Type in CRM On Demand. I am not able to find any similar literature in the Help books.
I would appreciate if somebody could give me real life steps please.
Thanks a lot

Okay. I found the solution to this.
Now, along with this single reference, we also wish to bring the values of some more joined fields from the other record type in the Opportunities screen.
We were hoping that the Default value, and using fx, we should be able to achieve this using "joinedfieldvalue". However, it's not bringing back any value. Our expression is -
JoinFieldValue('<CustomObject3>',[<CustomObject3Id>],'<stState_ITAG>')
Please help if you have done this before.
Thanks & Regards

Error while creating function with record type as return type

Hi i tried the following code to get the nth highest sal using record type and function.
CREATE OR REPLACE PACKAGE pack_rec_cur AS
TYPE rec_type IS RECORD (
name EMP.ename%TYPE,
sal EMP.sal%TYPE);
END;The above package is created
CREATE OR REPLACE
FUNCTION fun_rec_cur(n INT) RETURN pack_rec_cur.rec_type AS
   rec pack_rec_cur.rec_type;
    CURSOR cur_rec IS
      SELECT ename,sal
        FROM emp
         WHERE sal is not null
          ORDER BY DESC;
BEGIN
OPEN cur_rec;
FOR i IN 1..n LOOP
   FETCH cur_rec into rec;
   EXIT WHEN cur_rec%NOTFOUND;
END LOOP;
CLOSE cur_rec;
RETURN rec;
END;   The above function is giving errors
LINE/COL ERROR
4/7      PL/SQL: SQL Statement ignored
7/16     PL/SQL: ORA-00936: missing expression
SQL> Could you please correct me where i'm doing mistake
Thanks.

You are missing the column name in order by clauase. Is it ename desc?
CREATE OR REPLACE
FUNCTION fun_rec_cur(n INT) RETURN pack_rec_cur.rec_type AS
   rec pack_rec_cur.rec_type;
    CURSOR cur_rec IS
      SELECT ename,sal
        FROM emp
         WHERE sal is not null
          ORDER BY ENAME DESC; ---added ename
BEGIN
OPEN cur_rec;
FOR i IN 1..n LOOP
   FETCH cur_rec into rec;
   EXIT WHEN cur_rec%NOTFOUND;
END LOOP;
CLOSE cur_rec;
RETURN rec;
END;
-OUTPUT
SQL> SET SERVEROUT ON
SQL>
SQL> DECLARE
2     rec            pack_rec_cur.rec_type;
3 BEGIN
4     rec         := fun_rec_cur (6); --you get the 6th record in order of ename desc
5     DBMS_OUTPUT.put_line ('ename::' || rec.NAME || ' sal ::' || rec.sal);
6 END;
7 /
ename::MARTIN sal ::1250
PL/SQL procedure successfully completed.
SQL>

Error in using plsql record type inside packages

Dear Friends,
Using Ora9iR2 on Windows 2000 Server. I am trying to declare a record type and a nested table of that record type in the package body and the initialise that in the package body then insert records into that. But I receive error msg.
CREATE OR REPLACE PACKAGE sample1 AS
TYPE rcur IS REF CURSOR;
TYPE emp_record IS RECORD
(empname VARCHAR2(20),
job VARCHAR2(10),
salary NUMBER);
TYPE emp_result IS TABLE OF emp_record;
PROCEDURE emp_test ( i_empno emp.empno%TYPE);
END sample1;
-- Package Body
CREATE OR REPLACE PACKAGE BODY sample1 AS
PROCEDURE emp_test ( i_empno IN emp.empno%TYPE)AS
c1 rcur;
eresult emp_result := emp_result();
v_empname VARCHAR2(20);
v_job VARCHAR2(10);
v_sal NUMBER;
BEGIN
OPEN c1 FOR SELECT ename,job,sal FROM emp WHERE empno = i_empno;
LOOP FETCH c1 INTO v_empname,v_job,v_sal;
EXIT WHEN c1%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(v_empname||' , '||v_job||' , '||v_sal);
eresult := emp_result(v_empname,v_job,v_sal); showing error
END LOOP;
CLOSE c1;
END emp_test;
END sample1;
While executing the procedure with out the line eresult := emp_result(v_empname,v_job,v_sal); the procedure executes fine.
SQL> execute sample1.emp_test(7900);
JAMES , CLERK , 950
PL/SQL procedure successfully completed.
With that line, i have error
SQL> execute sample1.emp_test(7900);
BEGIN sample1.emp_test(7900); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "KUMAR.SAMPLE1" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
While executing in PL/SQL Developer, it says the wrong number or types of arguments call to ;EMP_RESULT'.
Please guide me where I am wrong.
Kumar

I got invalide data type error.I think the datatype in the CAST() clause must be a SQL Type i.e. one created with a CREATE TYPE command in the database. emp_result is only a PL/SQL datatype.
But I dont know why it is saying error
eresult(eresult.count) := emp_result(v_empname,v_job,v_sal); eresult is a table of records. It is therefore expecting a record. records don't seem to be created in the same way that user defined types are.
The concept of handling records like this is new to 9i and they are still smoothing out the bumps. Things are a lot better in 9.2 than in 9.0.1 if it's any consolation. There is a particular gap in the documentation, which is what's tripping you up at the moment: the difference between TYPE AS RECORD and other types, also the difference between VARRAY, NESTED TABLE and REF CURSOR. To be honest, it's all kind of hazy for me at the moment: I always need to run some code before I make any pronouncements on this topic.
Good luck, APC

How create a record type and a pl/sql table of that record type in database

Hi
I want to create a record type and then I want to create a PL/SQL table in the oracle 9i database.
I have done it in PL/SQL block.
But when I am trying to do it in database it is throwing me some error.
Could you please tell me how can I do that?
Regards

user576726 wrote:
Hi
I want to create a record type and then I want to create a PL/SQL table in the oracle 9i database.
I have done it in PL/SQL block.
But when I am trying to do it in database it is throwing me some error.
Could you please tell me how can I do that?
RegardsRECORD type is supported only in PL/SQL for SQL you need to use OBJECT type.

How to assigne value in sub record type

Dear below mention record type database,now i want to assigne value in payr_rec type,in this recrocrd type have one column party_id,but how can assigne value int this field ,
TYPE group_rec_type IS RECORD(
group_name VARCHAR2(255),
group_type VARCHAR2(30),
created_by_module VARCHAR2(150),
-- Bug 2467872
mission_statement VARCHAR2(2000),
application_id NUMBER,
party_rec PARTY_REC_TYPE := G_MISS_PARTY_REC
please guide.

to get the desired default party_rec attribute value, just assign the "sub-record" attribute defaults as desired; PL/SQL will assign a default (non-null) record as the party_rec value using those attribute defaults:
create or replace package P_Test_It
as
     type party_rec_type is record (
          dummy varchar2(1) default 'X'
     type group_rec_type is record (
          group_name VARCHAR2(255),
          group_type VARCHAR2(30),
          created_by_module VARCHAR2(150),
          -- Bug 2467872
          mission_statement VARCHAR2(2000),
          application_id NUMBER,
          party_rec PARTY_REC_TYPE
end;
set serveroutput on
declare
     rec p_test_it.group_rec_type;
begin
     dbms_output.put_line(rec.party_rec.dummy);
end;
X
PL/SQL procedure successfully completed.Hope it helps.
Gerard

ACH CTX - Addenda Record Type 7

Hi,
I am working on ACH CTX file for vendor payments through Wells Fargo bank. I need some help on the Addenda Record type 7. The format generated by standard SAP for this record type 7 is not acceptable by the bank. And they are not able to help us out much on what should be the format. All they say is that it should be in ANSI ASC X12 format (payment-related information) and refer NACHA format guidelines. Can anyone tell me what is this NACHA format and what data elements should be passed on in this record type. Is there a specific format I can follow?
Thanks,
Raj/

Hi,
did you solve this items. Any information would be helpful.
thanks
Regards
PG

Howto post offsetting entries for Record type Z Line items in KE24 from FI

HI,
We are facing one problem for order created from CRM.
Firstly this order has created with one profit center ( ex PH50293 ) they have posted some plan values and released the order in CRM so values flown to ECC and available in KE24 .
After some time , we have changed profit center for this order in CRM by changing service organisation and release the order after that we have posted some values in that order which is not flown to ECC becuase of different profit center
Later we rejected the all values and make balance zero in CRM , But still values are appearing in KE24 and there is inconsistency of profit center between ECC & CRM.
Now want to make the balances zero in KE24 for that order. but it shows record type Z ,
So , now how we can rectify this and how we can make balances zero
__Note : as per present setting in the system, we can not change the profit center in CRM once order released_._
Thanks & Regards
Gupta

Dear VK,
I guess, the only option would be to post manual correction thru KE21N, with negative values for record type Z.
Trust this helps.
Cheers.

Oracle Account Receivables Lockbox Error, No ITEM NUM on PAYMENT record type.

Hi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan Garg

Hi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan Garg

DB proc - do you need to create a table to pass a ref cursor record type?

I want to pass a limited selection of columns from a large table through a DB procedure using a REF CURSOR, returning a table rowtype:
CREATE OR REPLACE package XXVDF_XPOS_DS021_ITEMS AS
     TYPE XXVDF_XPOS_DS021_ITEM_ARRAY
     IS REF CURSOR
     return XXVDF_XPOS_DS021_ITEM_TABLE%ROWTYPE;
Do I need to create this dummy table?
I can't get a TYPE to work, where the type is an OBJECT with the desired columns in it.
So a dummy empty table will sit in the database...
Is there another way?
thanks!

You can use RECORD type declaration:
SQL> declare
2   type rec_type is record (
3    ename emp.ename%type,
4    sal emp.sal%type
5   );
6   type rc is ref cursor return rec_type;
7   rc1 rc;
8   rec1 rec_type;
9 begin
10   open rc1 for select ename, sal from emp;
11   loop
12    fetch rc1 into rec1;
13    exit when rc1%notfound;
14    dbms_output.put_line(rec1.ename || ' ' || rec1.sal);
15   end loop;
16   close rc1;
17 end;
18 /
SMITH 800
ALLEN 1600
WARD 1250
JONES 2975
MARTIN 1250
BLAKE 2850
CLARK 2450
SCOTT 3000
KING 5000
TURNER 1500
ADAMS 1100
JAMES 950
FORD 3000
MILLER 1300or use, for example, VIEW to declare rowtype:
SQL> create view dummy_view as select ename, sal from emp;
View created.
SQL> declare
2   type rc is ref cursor return dummy_view%rowtype;
3   rc1 rc;
4   rec1 dummy_view%rowtype;
5 begin
6   open rc1 for select ename, sal from emp;
7   loop
8    fetch rc1 into rec1;
9    exit when rc1%notfound;
10    dbms_output.put_line(rec1.ename || ' ' || rec1.sal);
11   end loop;
12   close rc1;
13 end;
14 /
SMITH 800
ALLEN 1600
WARD 1250
JONES 2975
MARTIN 1250
BLAKE 2850
CLARK 2450
SCOTT 3000
KING 5000
TURNER 1500
ADAMS 1100
JAMES 950
FORD 3000
MILLER 1300 Rgds.

Reading fixed length file with different record types

Hi,
I need to read a fixed-length file with different record types, but the record identifier is in 31st position and not in 1st position.
But if I give 31 as position in File adpater wizard, BPEL takes whole 1-31 as identifier.
How we need to read such files.
Thanks
Ravdeep

hi ,
u cannot use the default wzard for this
use some thing like this nxsd:lookAhead="30" nxsd:lookFor="S"have a look at the below link it has some examples
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm

Dbms_xmlgen using pl-sql record type

Hi
I want to pass pl-sql record type and want to generate xml. Can dbms_xmlgen access pl-sql record type instead of query?
OR please let me know any other package to pass pl-sql record type and generate XML.
Thanks in advance

Can dbms_xmlgen access pl-sql record type instead of query?Don't think so, but can't you pass the individual record components:
SQL> declare
type rec is record
    a   int,
    b   varchar2 (30)
r     rec;
ctx   int;
x     xmltype;
begin
r.a := 1;
r.b := 'Michael';
ctx := dbms_xmlgen.newcontext ('select :x id, :y name from dual');
dbms_xmlgen.setbindvalue (ctx, 'x', r.a);
dbms_xmlgen.setbindvalue (ctx, 'y', r.b);
x := dbms_xmlgen.getxmltype (ctx);
dbms_output.put_line (x.getstringval ());
dbms_xmlgen.closecontext (ctx);
end;
<ROWSET>
<ROW>
<ID>1</ID>
<NAME>Michael</NAME>
</ROW>
</ROWSET>
PL/SQL procedure successfully completed.?

JoinFieldValue Revenue Record Type

Similar Messages

Maybe you are looking for