Journal Project can't display slideshow

Hi,
For that old version iphoto, i can create my journal project and play the slideshow in "Dateline" mode. This mode will display what i added in the journal like note, header, memory and food note.
For new version iphoto, inside my journal Project not have any option to play my slideshow.
So I need go to Project -> select "+" -> select slideshow -> select Project tab in the bar -> choose my journal project. I find that it cannot play all my journal file by one click and it need manually select all my picture. So later my note that i added in my journal project will not display it. Please advise.
regards
LTT3

You can toggle presenter display on/off in Keynote's Preferences.
When you have the projector hooked up, you will also need to go into System Preferences -> Displays and turn on mirroring.

Similar Messages

How can I display Task's "Resent Changes" or "Updates" or "History" in the project site

Hello,
When a task is assigned to a team member, the team member may keep sending frequent updates "Status" for the task to the approving whenever he finishes anything in the task. These updates can be shown in the Task Details (in PWA).
My question is, how can I display the Task's "Resent Changes" or "Updates" or "History" in the project site, so ALL the team member can see the "Progress" of that task?
Thanks

Hi,
I'm not sure it is relevant that all team members see all task updates through the project site. It will be a lot of information that might not be relevant and could generate confusion.
Instead of this, I'd suggest to share the project schedule through the project site with regular baselines and eventually to review task update/approval with team members in PWA during a weekly status meeting.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

Can i edit slideShow size?

when i go to view a thumbnail and it opens the picture up the window covers my whole screen (23inch) and my pic is only like 500 pixels. is there a way to resize the slide show window so it fits perfect around my pic. or will i have to open the slideshow HTML in dreamweaver and reset it there?

Hi,
Unfortunately, it is not possible to edit the size of the image placeholder in TOC in Captivate 5. The image is scaled down to project size and displayed in the TOC.
You could please log a Feature Request for the same under https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5.
Thanks,
Sushma

How can i display image in mx:TextArea Component?

I found display img tag in htmlText of mx:TextArea component
is very difficult in Flex Air
I new a simple air project in flex builder, put the code
below in it, i put a glad.png file in the src folder, every thing
is OK, when i run it, image cannot be displayed. why this happend,
I search the google for the solution, it seems there is a bug in
air, and told me to use mx:HTML coponent, but that component still
can not display img tag.
could any one help me with this?
<mx:TextArea width="100%" height="100%">
<mx:htmlText>
<![CDATA[
<a href='
http://www.adobe.com'><img
src='glad.png'/></a>Click the image to go to the Adobe
home page.
]]>
</mx:htmlText>
</mx:TextArea>

I ran into a similar problem and wasn't able to find a way to have regular Flex components (like Text and TextArea) display <img> tags in their htmlText. Everything works find in a web-based Flex application, but once the same code was used in AIR, the images just wouldn't display.
I changed my display to use the mx:HTML component and everything worked fine (I was using only external images).

How can I display comments when using poll

hi Experts,
I am using wc11.1.1.5 with poll function, I published a poll with some questions and a text box for suggestion feedback, when I check result, I can only get answers for the question but no suggestions can be displayed, how can I get the suggestion displayed?
Best regards

You have to customize surveyResults.jsff page fragment that is available in "WebCenter Polls and Surveys Service View" library. You can find this library by creating a WebCenter Spaces Task flow Customization project from Jdeveloper. Kindly do let me know if you need more details in this regard.
You have add output or label in surveyResults.jsff and then map its value attribute with RE of suggestion text area might be available in surveyResultBean class.
How to customize task flow, pls see following link:-
http://download.oracle.com/docs/cd/E21764_01/webcenter.1111/e10148/jpsdg_taskflows.htm#BACIEGJD

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

BPM Workspace can't display the flash movie with IE

Hi
We have the following problem, we have a BPM project with a flash screen, when we execute the project in the workspace of BPM studio we can see the Flash, but when we published the project in BPM Enterprise , the workspace can't display the flash movie, it just display the panel without buttons and fields. This happen just in Internet Explorer, in other browsers we can see the flash.
Any idea or solution ??
Thanks in advance

Actually, I got it working now...
It seems that I have to have all the files in the same folder
as the page it displays on!
Historically I would dump a standard flash clip (not a
converted movie with buttons) into the /images folder.
I tested this intitally in a /video folder (just to keep all
the files in one place) which would display the clip but not the
buttons but as soon as I moved the files in the same directory as
the page itself (which is the main index.html) it worked fine!
So if anyone does read this is there a reason for that as I
would like to keep everything in separate folders!
Cheers, J

Timeline - can't display it

Having inadvertently disabled the timeline in a project, I
now can't display it. Any idea why?

Hi royhendo and welcome to our community
Have you tried clicking View > Show Timeline? Assuming you
have done this, it's possible that the Timeline is also a bit in a
hidden state. Hopefully you are seeing the darkened arrow just
above the edit area. If so, click the arrow and see if you then see
a bar that says Timeline for slide X (but not timeline visible). If
you see the bar, click anywhere along the bar and see if you then
see the Timeline.
Cheers... Rick

Can Iphoto display the date and time of a pic on the pic?

I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Can a LR slideshow be burned to a DVD?

Is there some way I can take a slideshow I've created in LR and burn it to a DVD so I can have someone view it on their DVD player (through a TV or projector) rather than on a computer?
I am a Mac user....does the solution to this involve iDVD?
Thanks.
Steve L

The size of the originals has almost no bearing on the resulting quality. As
I said, DVDs have very low resolution and you simply cannot go higher. In
the US, they can at a max contain 720x480 pixels. For a movie this is not so
much of a problem, but for slideshows this doesn't work. What you need is
some sort of High Def player and a high def TV or projector. If you want to
project through a TV, there are quite a few other options than DVDs. One is
to burn a simple disc with jpegs. Many DVD/BluRay players will recognize
those and play slideshows based of of those. If the player is a HD one
(either upconverting or BluRay), it might give you better quality. Another
option is a settop box. Since you have an Apple, you can think about the
AppleTV. This will play slideshows in High Def from a share on your wifi
network if you have a HDTV. There are many other makers of such set top
boxes, such as Roku. Most will play jpegs over a Wifi really well, or they
will have little SD flash memory slots or USB ports that you can stick a
thumbdrive into. The last option is to simply hook a computer up to your TV
or projector.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

How can i display Waveform chart in a subpanel using Vi templates.

Hi All
I am new to Labview hence need some help. I am trying to develop an application which reads some data from a Wireless Sensor Network (WSN). The WSN consists of base station connected to the USB port which recieves data from other sensor nodes. The data comes in a certain format. Node name, temperature reading, humidity reading etc. I want to read the data from the serial port and based on the Node name, i want to display the information for each node in s separate window or subpanel etc. So if a new node is detected then a new window is created for that node. Since all the nodes have the same sensors on board i only need a one template. I can read the data using the serial port, parse the data to detect which node it is and also what the sensor readings are. I have created a template VI for the sensor node. I am having problems in displaying the template VIs in a subpanel. I can succesfully display a Waveform graph in the subpanel but i am having problems in displaying a waveform chart in the subpanel. I can see the actual waveform chart in the subpanel, but i cannot see the plot. Would be greatful if someone could point out what i am doing wrong here.
Many Thanks
Raza
Solved!
Go to Solution.
Attachments:
template_graph.vi ‏16 KB
graph_template.vit ‏11 KB

Hi All
I think i have solved the problem. It seems like i was running the Vi in a loop. I have taken the Run Vi outside the while lopp and this works fine. Also i need to close the reference at the end.
Raza

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

Journal Project can't display slideshow

Similar Messages

Maybe you are looking for