JPS-03026: PDPService and PolicyStore Service instance not found in default
Dear all
I just installed OIAM and I am facing this error when I try to start AdminServer:
JPS-03026: PDPService and PolicyStore Service instance not found in default context
There is an entry in the manual that says that I need to execute this:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
I did it, I see in the weblogic.policy file the entries mentioned in the manual:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_
${jrf.version}/*" {permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {permission java.security.AllPermission;
Still I have the same issue.
Any ideas?
Thanks
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
Similar Messages
-
Agent and TNSListener service can not run when system starting
The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!
geno.nullfree wrote:
I'm not sure but since it's saying there's a library issue, you could try running:
# ldconfig
Failing that you could try a:
# pacman -Rns slim
# pacman -Syu slim
I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
Maybe I need use another way to recompile slim in my machine.
But I have no time to test it now, I will try it another day.
Thx for replies. -
Netlogon and Workstation Service will not start.
I have a Windows 2012 R2 Standard guest installed on the HyperV Machine running windows 2012 R2 with SCVMM2012 R2.
When I install the server the Workstation and Netlogon service will not start. I have only made a clean installation with no extras. I keep getting this error in th system event log:
The Workstation Service depends on the Browser Support Driver service which failed to start because of the following error;
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be a malicious software from an unknown source.
Event ID: 7001
I have searched forums and I have not been able to locate a solution that worked for me.
I have tried to install from another media but the result is the same every time.
Have anyone some suggestion to what I can do to get this working?
Thanks
Jacob
______________________________________________ /JacobHi Jacob,
In addition to Tim’s suggestion, although the following article focuses on the SBS 2008, we can refer to the method it provides to see whether it can be helpful for us to
fix the issue.
Error: "The Workstation service depends on the bowser service which failed to start because of the following error: Windows cannot verify the digital signature for this file."
when you try to start Workstation service on SBS 2008
http://support.microsoft.com/kb/2568759/en-us
Hope it helps.
Best regards,
Frank Shen -
Error while invoking bean "finder": Instance not found in datasource
Hi All
I am facing Error while trying to execute a BPEL processing using Notification service for sending out mail .
Following is the Error Stack :
<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "finder": Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
at [b]com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
at displayInstance.jspService(_displayInstance.java:111)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
<2006-09-20 14:55:44,109> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
<2006-09-20 14:55:44,119> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
The understanding formed till now is that the service is trigged using a stateless session bean wrapper and the lookup for the same is failing.
One option will be to write the java code for performing the lookup using method
lookupInstanceByConversationId(String convId, DomainAuth auth)
but certain information e.g DomainAuth is not available.
I have tried locating information about the dynamic wrapper which is being created.
Any inputs/comments/direction for the above problem are welcomed
CheersThanks Marc.
I checked the domain log (ORA_BPEL_HOME\bpel\domains\default\logs\domain.log) for information. It repeats the same error displayed in the bpel server window.
I have now put some SOPs in my Java embedding activity to see if the process gets instantiated or not. On the BPEL server window, I am able to see these SOPs upto the point where I invoke a method invocation on my remote Java class. Which clearly means the BPEL process is instantiated, contrary to the information in the error (that the BPEL instance cannot be found) I am getting. -
Livecache Error in SCM5.0 - Database Instance Not Found
Hi,
I installed SCM5.0 SR2 IDES version on Windows 2003. I selected Livecache in SAP System option when installing SCM5.0. After complete installation, I executed MAxDb exe file to install the MaxDb. I get this error when I try to access LCA Monitor in LC10.
Here the error details:
Name and Server: LCA - SCMSRVR
DBMRFC Function: DBM_CONNECT
Error: DBM Error
Return Code: -4
Error Message: Database Instance Not Found
It wolud be really helpful if someone could respond to this messgae.
Thanks
SatishHello Satish,
-> My assumption was correct. Please see my first reply:
"Please pay attention that the liveCache server software is not supported on the 32bit Windows
server. You could install the liveCache client software on 32 bit Windows server, if the
application running on the 32 bit Windows to be able to communicate to the liveCache instance. The liveCache instance need to be installed on another server, please overview the
PAM matrix or check info at
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0 ->
"Matrix of released OS platforms for SAP liveCache Technology 7.6.0" "
You need the server, where you could install the liveCache instance.
After the liveCache instance will be installed, you need to follow up with the post installation
Steps from the liveCache installation guide, which you could also display from link
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0
-> "Yes.I found the above two files.
Dbmcli.exe --> Found in the directory /sapdb/programs/pgm
Sdbregview.exe --> Found in the directory /sapdb/programs/bin"
==> You could start the command prompt from those directories & run the recommended
commands.
With output of the 'sdbregview -l' command you will get the list of the database packages
installed on the server.
-> Please see helpful SAP notes ::
820824 FAQ: MaxDB / SAP liveCache technology
767598 Available documentation
Thank you and best regards, Natalia Khlopina -
DATABASE MANAGER ERROR "-4 database instance not found"
Hi
I have installed NNW 2004 ABAP Trial Version and everything seems to be good. SAP GUI is installed and MAX DB too.
Except, I am unable to "add a database instance" in the Database Manager. The instructions tell me to leave the entries as default (database server: <local> and port: <default>) but then when I click the ADD button up pops the message:
-4 database instance not found
I have a 32 bit Intel Atom processor Netbook running Windows 7 with two drives C: and D:. I have tried disabling my antivir with no avail.
I think the problem could be either:
A) My installation is on the D drive but the database might be searching for something on the C drive????
B) There are some "sap" type entries (like 200 of them) in my system32/drivers/etc/services file. One in particular is "sapdp00 3200/tcp" and I know the installation says make sure there are no "3200 ports". I would like to change this and save the file but up pops a message saying "access is denied" even though I have admin rights.
Any help would be appreciated
JoshPlease, any hints or directions would help immensely as I am not a technical expert
Thanks in advance -
View attributes can not be retrieved. View instance not found or undefined
Hi,
I am creating a simple master detail OAF page. For this I have done following steps:
1. Created ParentEO and ChildEO
2. Created ParentVO with a transient attribute called "SelectFlag" with default value "Y" .
3. Created ChildVO
4. Created a UserViewLink.
5. Created Application module (UserAM).
6. New Page UserPG
7. In the main region I have defined Application Module.
8. Under the main region, I have created a new advanced table region with following properties:
View Instance : ParentVO1
Detail View Attribute : SelectFlag
View Link Instance: UserViewLink.
Now when I click to select the "Child View Attribute", it gives a pop up saying "View attributes can not be retrieved. View instance not found or undefined".
Please help, I am not able to proceed on this.
Thanks,
AnupamAnupam,
I do not see in your steps where you associated the VO with the AM. In order to select an attribute, the AM must have an instance of the VO associated with it. Double click the AM in the navigator. Click Data Model and shuttle the VO's you want to be available from the left to the right.
Hope this helps.
Kristofer -
Service ticket not found in the subject
Hi,
I've got simple authorisation working from Java to an Linux MIT KDC. I've also got tickets via kinit from the kdc on the Linux server. I'm trying to use JAAS sample code:
Does anyone know how I can get this to work?
MY login.conf file is
GSSClient{
com.sun.security.auth.module.Krb5LoginModule required
useTicketCache="true";
Rserver{
com.sun.security.auth.module.Krb5LoginModule required
storeKey=true
useKeyTab=true
doNotPrompt=true
keyTab="/etc/harsh.keytab"
principal="Rserver/kdc.mahindrabt.com";
and the error which i am getting is i have enable debug
ratnesh
Name of the [email protected]
before peerlc.login()
KinitOptions cache name is /tmp/krb5cc_0
DEBUG <CCacheInputStream> client principal is [email protected]
DEBUG <CCacheInputStream> server principal is krbtgt/[email protected]
DEBUG <CCacheInputStream> key type: 16
DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> start time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
CCacheInputStream: readFlags() INITIAL;Host address is 10.3.1.110
DEBUG <CCacheInputStream>
DEBUG <CCacheInputStream> client principal is [email protected]
DEBUG <CCacheInputStream> server principal is host/[email protected]
DEBUG <CCacheInputStream> key type: 1
DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> start time: Thu Dec 18 16:17:13 IST 2003
DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
CCacheInputStream: readFlags()Host address is 10.3.1.110
DEBUG <CCacheInputStream>after peerlc.login()
prior to subject.doAs()
value of s isSubject:
Principal: [email protected]
Private Credential: Ticket (hex) =
0000: 61 82 01 06 30 82 01 02 A0 03 02 01 05 A1 10 1B a...0...........
0010: 0E 4D 41 48 49 4E 44 52 41 42 54 2E 43 4F 4D A2 .MAHINDRABT.COM.
0020: 23 30 21 A0 03 02 01 00 A1 1A 30 18 1B 06 6B 72 #0!.......0...kr
0030: 62 74 67 74 1B 0E 4D 41 48 49 4E 44 52 41 42 54 btgt..MAHINDRABT
0040: 2E 43 4F 4D A3 81 C3 30 81 C0 A0 03 02 01 01 A1 .COM...0........
0050: 03 02 01 01 A2 81 B3 04 81 B0 CB 01 79 E9 43 1A ............y.C.
0060: AE 64 90 28 83 D6 79 82 6A 4C 26 08 A9 C2 59 E7 .d.(..y.jL&...Y.
0070: 21 2E 4C 41 81 B5 01 75 9A 24 87 C0 30 3B F9 A7 !.LA...u.$..0;..
0080: 6B 4E 5D 29 5D A0 9F 91 55 92 D6 FD E4 4B 0A 84 kN])]...U....K..
0090: 06 5B 07 14 00 7E 96 C6 2F 15 4B 34 9F D6 0D E2 .[....../.K4....
00A0: 89 48 B3 78 63 B8 A0 B0 81 14 28 A8 3F 29 A5 D7 .H.xc.....(.?)..
00B0: 64 D5 40 B7 19 A8 6D FC F2 82 86 02 C5 13 32 AA [email protected].
00C0: A8 42 A5 8B 3D 52 DB 83 C7 1F 19 31 3E 6C 87 B0 .B..=R.....1>l..
00D0: BD A5 6A 26 8E DB 2C EA F5 06 2F 90 0A DA 77 58 ..j&..,.../...wX
00E0: CC 0A 67 27 4E 51 7D 74 50 08 79 E4 06 EA C9 30 ..g'NQ.tP.y....0
00F0: E4 F8 40 51 F5 D9 FA C1 AF D9 D3 2E 4A 32 59 CC [email protected].
0100: 10 1A 0F AA 7D 98 30 9B A7 26
Client Principal = [email protected]
Server Principal = krbtgt/[email protected]
Session Key = EncryptionKey: keyType=16 keyBytes (hex dump)=
0000: 9B B5 0E FB 8F 49 64 8F 32 31 10 AE 6E A8 BA 80 .....Id.21..n...
0010: C4 16 45 4A 92 34 A1 02
Forwardable Ticket false
Forwarded Ticket false
Proxiable Ticket false
Proxy Ticket false
Postdated Ticket false
Renewable Ticket false
Initial Ticket false
Auth Time = Thu Dec 18 15:20:02 IST 2003
Start Time = Thu Dec 18 15:20:02 IST 2003
End Time = Fri Dec 19 01:20:02 IST 2003
Renew Till = Null
Client Addresses clientAddresses[0] = /10.3.1.110
GSSClient... Getting client credentialsFound ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
GSSClient... GSSManager creating security context
GSSClient... Sending token to server over secure contextEntered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
Service ticket not found in the subject
Credentials acquireServiceCreds: same realm
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumTypeKrbException: KDC has no support for encryption type (14)
at sun.security.krb5.internal.crypto.p.a(DashoA6275:58)
at sun.security.krb5.EncryptedData.<init>(DashoA6275:84)
at sun.security.krb5.KrbApReq.b(DashoA6275:438)
at sun.security.krb5.KrbApReq.a(DashoA6275:211)
at sun.security.krb5.KrbApReq.<init>(DashoA6275:172)
at sun.security.krb5.KrbTgsReq.a(DashoA6275:319)
at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:166)
at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:87)
at sun.security.krb5.internal.az.a(DashoA6275:289)
at sun.security.krb5.internal.az.a(DashoA6275:106)
at sun.security.krb5.Credentials.acquireServiceCreds(DashoA6275:490)
at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:580)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
at GSSClient.run(GSSClient.java:184)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:320)
at GSSClient.login(GSSClient.java:124)
at GSSClient.main(GSSClient.java:63)
GSSClient... GSS Exception No valid credentials provided (Mechanism level: KDC has no support for encryption type (14))after to getting context
Client authentication deined..
If i dosnt do kinit it work fine
Cheers
Harsh AhujaI think you do have a ticket in your subject, problem is that they ar'nt readable by suns core librarys. Sun seems to lack suport for des3-cbc-sha1. Try creating tickets with des-cbc-crc.
wikm@empusa:~$ klist -a
Credentials cache: FILE:/tmp/krb5cc_1001
Principal: [email protected]
Cache version: 4
Server: krbtgt/[email protected]
Ticket etype: des-cbc-crc, kvno 1
Auth time: Dec 22 15:31:03 2003
End time: Dec 23 01:31:03 2003
Ticket flags: initial
Addresses: IPv4:130.237.95.15
Server: [email protected]
Ticket etype: des-cbc-crc, kvno 2
Auth time: Dec 22 15:31:03 2003
End time: Dec 23 01:31:03 2003
Ticket flags:
Addresses: IPv4:130.237.95.15
/ Mikael -
SQL MP - System Center Management Health Service Credentials Not Found Alert Message
Hi Dears,
I have read so many open cases, but I could not find solution to my situation...
Error: System Center Management Health Service Credentials Not Found Alert Message
Desc are 1 of those 2:
An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
Okay, I am fine, I verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
and it is fine....
BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
Please I need it step by step coz I am not able to handle this issue....
Thank you GuysHi,
If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
credential.
Niki Han
TechNet Community Support -
Visual Composer services are not found
Hi there,
I have installed SAP NetWeaver 2004S SR 1 according to the installation guide which was included in the installation files. After installation of the system (excluding MaxDB Database Manager and SQL Studio) I started the server. After that I installed Adobe SVG Viewer and tried to start Visual Composer by calling http://localhost:50100/VC. When I do so, I get two error messages stating <b>Server Error: Visual Composer services are not found</b> and <b>This product requires MSXML Parser v4.0</b>. What am I doing wrong?
Thanks a lot for any help!
Regards,
MarcHi Mario,
mh...strange.
I used the VC on our old server with my notebook without a problem (great tool!).
Now we have a new server with a new NW 04s SP10 (very fresh installed ) and there I get the "Server Error: Visual Composer services are not found" and "This product requires MSXML Parser v4.0" errors.
Unfortunately I cannot test it on the old server, because it was a interim system.
Regards,
Christian -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work. -
Shared services database not found in the specified database
Hi Guys,
In Hyperion EPM System confirurator,i gave all the fields and click next button it show error message "Shared services database not found in the specified database"Hi ,
1. Pls confirm me one thing. Did you re -install version 11.
2. Re intstallation of version 11 has lot of issues ( atleast 11.1.1.1).
Sandeep Reddy Enti
HCC
http://hyperionconsutlancy.com/ -
Service URL not found:session
Hi,
I had written a custom authentication module according to the sample given with SunONE doc. But, when I try to login to the portal server, it is throwing the following exception in /opt/SUNWam/debug/amSSOProvider file.
how to solve this issue:
I am using SunONE portal server 6.1
05/13/2004 07:22:54:260 PM GMT+05:30: Thread[Thread-157,5,main]
could not create SSOToken from HttpRequest
com.iplanet.dpro.session.SessionException: Service URL not found:session
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:336)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:316)
at com.iplanet.dpro.session.Session.getSession(Session.java:233)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:56)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:226)
at com.sun.portal.desktop.context.DSAMESessionAppContext.getSSOToken(DSAMESessionAppContext.java:67)
at com.sun.portal.desktop.context.DSAMESessionAppContext.getSessionID(DSAMESessionAppContext.java:99)
at com.sun.portal.desktop.context.PSDesktopAppContext.getSessionID(PSDesktopAppContext.java:725)
at com.sun.portal.desktop.context.PSDesktopContextFactory.getDesktopContext(PSDesktopContextFactory.java:91)
at com.sun.portal.desktop.DesktopServlet.getDesktopContext(DesktopServlet.java:384)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:413)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:303)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)seems like you have cookie encode problem,
based on your
container you need to set the following property in AMConfig.properties
in general for welogic and web sphere contianers you need to set it to true
com.iplanet.am.cookie.encode -
LMS4.1: Automonitor Link Ports + Instance Not Found
Hello,
In HUM there are no linked interfaces discovered, dispite them exists at CM topology and DCR discovery report sees all CDP neighbors as well.
1.
All Devices Device Availability
Active
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
2.
All Devices CPU Utilization
Active
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
3.
Link Ports Interface Availability
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
4.
Link Ports Interface Errors
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
5.
Link Ports Interface Utilization
Instance Not Found
1 Minute 5 Minutes 15 Minutes 30 Minutes Don't Monitor
What can we do?
march-bundled path for LMS4.1 has allready been installed.
Want to create the interface poller based on a report of linked ports manualy. But neither port nor interfaces have got neighbor attributs.
How is this possible to create a linked port report?
thx for hints,
SteffenFWIW with Cisco TAC and DiData on similar set of circumstances for our install, it was paramount that devices discovered and/or manually added are actually interconnected. Once added successfully, we De-activated then Activated these three pollers, then their status remained ACTIVE and stable. And stats like Utilization (ONLY on interconnected links) were populating successfully.
In hindsight this makes sense, but yeah if you take the slow and steady approach and like one device at a time, you'll get stuck on this one.
Regards, Christopher -
Hi,
I try to develop a Photoshop CC extension panel with the Extension Builder V3. But when I try to run the panel I get an error message saying that the CEP Service is not found. I check the file system and cannot find it either. Any suggestions?
Thanks,
SvenI found the answer: Adobe Extension Builder and Creative Cloud 2014
Maybe you are looking for
-
ThreadPoolExecutor and using priority to determine what threads will run
Hello, I am fairly new to Java, so I apologize if there is an obvious answer. The ThreadPoolExecutor is a great class for thread management. What I would like to do is have a priority scheme that would determine what thread should be run next. For ex
-
My iphone 4 has been stolen. Ive done some googling and found you can erase a passcode and restore a phone to factory settings using itunes... if this happens and someone tries to do it with my phone- will i be notified???
-
I have 2 iPads and neither are connecting to the store
We already have one ipad2 and have bought another - I have set these both up in my name and same payment details but using different apple IDs and passwords.... They were both working well this morning allowing FaceTime and app purchases but both hav
-
Hi Everyone, My midlet creates new RecordStores if not already present, or opens it if it is already present and returns the object of RecordStore. I am maintaining these RecordStore objects in a hash table, Like... RecordStore rs = null;
-
Can i see the LAST UPDATE made?
hey ppl... I was wondering if there is a way to list all the recent updates made by my iBook..Be it iTunes update or anything else.. And is there anyway that i can undo the last update made? This is bcoz i guess i tried to update my system, and the o