JPU1 100- in FTXP for tax code U1

Instead of a rate, for tax code U1 I see 100- on both the state and county level represented by the txjcd code I entered.
Can someone explain why I see this vs. an actual rate like the S1 (sales tax) .
Thanks,
Richard

Another question:
Why does Tax Code I1 and U1 act differently with base amounts? They pretty much do the same thing except one allows you to enter tax and the other allows a external system to calc tax (Our system is VERTEX). It shouldnt change the base tax posted amount? What am I missing?
Edited by: Jack Green on Jun 22, 2011 5:33 PM
Edited by: Jack Green on Jun 22, 2011 5:36 PM

Similar Messages

No tax item exists for tax code O0 in a G/L account item.

while posting the credit memo for sales return accounting document is not created. its shows the error as No tax item exists for tax code O0 in a G/L account item.
plz help me in solving the issue

Dear Venkatesh,
1.First check that material wether that is relevent for taxes or not.
Check wether Tax indicator set or not in the material master Sales org data1 or 2
2.Check condition record exists for that material or not
3.Then check the Tax code and G/L account assignment in the transaction FTXP
I hope it will help you,
Regards
Murali.
Edited by: Murali Mohan.T on Feb 13, 2008 10:42 AM

Tax statement item missing for tax code O3

Hi experts,
I'm sorry about my question which can find out a lot in SDN forum, but i still post this here because my case is different, I see some similar Error, but I cant solve my issue.
In sales standard process, I do SO, DO, Bill without that error. but Just Free goods process.
I have a error in Free goods process
I create SO for Free goods and enter manual quantity and Item category
(I'm using R100 condition for free good)
Then create Delivery.
Then create Billing, save and get error:
Document 90000319 saved (no accounting document generated)
Message no. VF050
After that, I go to VF02, and click to Release flag, I get:
Tax statement item missing for tax code O3
Message no. FF805
Diagnosis
No tax item exists for tax code O3 in a G/L account item. A possible
cause is an incorrect transfer of parameters by the application to the
Accounting interface.
Procedure
Enter an OSS message.
I search in OSS note, but I cant solve it.
Please help me to solve this Error,
Many thanks

Hi,
In FS03, I see allowed output tax in tax account.
I get the reason of this error, but I dont know how to solve.
In my procedure, I have some condition type:
PR00 - price
R100 - 100% discount
MWST - Output tax
and, Z001: FEE (This amount must sent to Goverment, no tax, so I enter higher Step no. in procedure)
In case Free goods, in VF01 must: (example: Sent 1 material A (price 10) to customer for free, no tax, but Fee (1))
Dr: Customer account: 1
Dr: Sales deduce: 10
Cr: Sales revenue: 10
Cr: Fee: 1
But I cant post this transaction.
Can you give me a solution for this case?

Tax statement item missing for tax code V0_During MIRO

Hi,
I am currently working on 6.0 for a client in UAE. I am getting the above error with tax code while passing MIRO. The tax code dwfined is a 0% tax code. System throws an error as ;
Tax statement item missing for tax code V0
Message no. FF805
Diagnosis
No tax item exists for tax code V0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message
On using the same tax code in FB60 system des not thr me an error.
Kindly let me know the the solution for the same.
Regards,
Ajay
Edited by: Ajay Gupte on Nov 7, 2009 9:05 AM

Hello,
I think all relevant details for the tax code "V0" are not maintained. Go the t-code "FTXP", for the country key and tax procedure, you shall get the details for the tax type, acct key, you can fill that details for tax percent rate. Double click on that tax type, you can enter the information for G/L account in combination wiith Chart of account.
Regards,
Sarthak

Tax statement item missing for tax code O0 . ||Message no. FF805

Hi Gurus,
I am trying to post SD billing document to accounting. The system issues error message FF 805 - Tax statement item missing for tax code O0. Our Development and Production systems are working fine and we have this issue with the quality system.
The following TCODES are verified for the configuration in FI and SD.
FTXP, FS00, V/0K, V/08, VK13, MEK3, FB13, VK0A
We have gone through the checklist specified in the following threads.
Error : Tax statement item missing for tax code
FF805 Tax statement item missing for tax code
FF805 Tax statement item missing for tax code O0
Tax code error
Eror message FF805 when mwst based condition value is zero
As well as refered the following OSS notes and checked the configuration with the development/production systems, which seems to be exactly same.
Note 971253 - Causes for error message FF805 in SD
Note 112609 - How are tax codes transferred to conditions ?
Note 400766 - Changes in accounting interface for Release 4.6
Please let us know if we are missing anythig else.
Thanks,
Veeru.

Issue resolved, Ultimately there was some user-exit missing.
Thanks,
Veeru.

TABLE FOR TAX CODE and amount break up when PO created

Hi,
Could you please tell us the table which stores the amount break up for a condiion type based on tax code when a Purchase Order is created.
Like :
When the amount (kwert) for a condition type(kschl) is 100.
Based on tax code(mwskz) and condtion type(kschl) the amount will break up
into some 60 and 40 .So this break up amount will store in some tables.
we have tried KONV .
where only 100 is stored

Hi
Pass the MWSKZ, KSCHL and ALAND fields to the table A003 table, if not A003 some A* table check that.
take the KNUMH field from it.
pass this field to KONP table along with KSCHL codn type field
You will get the condition type based amount fields from KONP (KWERT field)
Reward points if useful
Regards
Anji

FI-SD Error FF805 No tax item exists for tax code R4 in a G/L account ite

Dear, I have create IN ECC 6.0 a sales orden whit the following conditions
                                                             CONDITION VALUE
VKPO   Price Sales                0,00   EUR
MWS     Sales Tax     4,000 %     0,00   EUR
ZGGM    recharges                 100,00   EUR
I have creata a billing document but when I execute the vf02 transaction for Release to Accountg apper the following error message
     Message no. FF805
Diagnosis
     No tax item exists for tax code R4 in a G/L account item. A possible
     cause is an incorrect transfer of parameters by the application to the
     Accounting interface.
The pricing procedure is
1     0     VKP0 2     2   5     0                                                                  6
10     0     MWST Sales Tax     S1016
30     0                              2     4
40     0     ZGGM30     5     5
This process work correctly in 4.5b version but not work in ECC 6.0
I have cheking the note 112609 and other notes but work
thanks

Hi,
Error message FF805 is usually due to configuration issues.
Tax conditions, especially the main ones UTXJ or MWST can not have a condition base value that is 0. If you are using UTXJ, the condition needs to be statistical and 100%. This condition controls how all the remaining tax conditions are calculated; and how the tax codes are determined.
Another cause of the error message is due to the reference steps in the pricing procedure. If the tax condition references a line that is not calculated in your document, the base value is 0 and you get the error. These reference steps also control how the tax codes are distributed. If you have conditions that are active and do not have a tax code, they are not within the reference for the tax condition, and you will get this error message. You must also have an active price for the tax condition to copy to when the billing document is released to accounting.
Please also checknotes 327373, 400766, 385127..
Hope this will help.
Regards,
Naveen.

FTXP Maintain tax codes - Tax rates

Hi all,
The Billing document is not passed on to the accounting.The accounts key MWS is assigned for the tax condition type.I checked in the T code FTXP for the country US and the Tax code 01.In the initial screen there are three tabs.Properties, tax accounts, deactivate line.I clicked the tax accounts.Another window popped up.There I am not seeing the any GL account assigned for the account key MWS.Is that wrong??
Incase i want to assign the GL account for MWS.How to assign? I am not seeing any new entry tab here.
Please assist
Mano

Hi,
Actually the GL account is getting determined when I go to Analysis and check.When I release the Credit memo to accounting, I am receiving the following error
Tax statement item missing for tax code O1
Message no. FF805
Diagnosis
    No tax item exists for tax code O1 in a G/L account item. A possible
    cause is an incorrect transfer of parameters by the application to the
    Accounting interface.
Procedure
    Enter an OSS message.
*I checked the condition tab in the Credit memo request.The value for the price condition types is zero.If I manually enter some price and create a credit memo.The billing is succesfully passing to accounting.*
*But Business doesn't want any price, they want only tax.They has passed billing to accounting with price conditions earlier.*
Mano

Tax statement item missing for tax code A0 - error while posting in MIRO

Hi,
At the time of MIRO, I am inserting P.O. and simulating the doc. However, at the time of posting the system is throwing the below mentioned error :
Tax statement item missing for tax code A0 (0% Input Tax)
Message no. FF805
Diagnosis
No tax item exists for tax code A0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.
Request you to help me resolving this error
Thanks in advance
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 11:30 AM

Hey K.R.
a) Are you able to post transaction through Accounts payable using the same tax code ? - YES
b) in Miro are you able to use any other tax code and post the document ?- NO
I have created other tax code and tried to use it in MIRO, but system throwing the same message. Is it somehow related to Tax procedure / OSS pack levels?The message Type is ERROR.
Please confirm.
Thanks and Regards
Sagar
Edited by: Sagar Padhye on Nov 5, 2009 3:51 PM

Error : Tax statement item missing for tax code

Hello Gurus,
I have issue while releasing a billing document to accounting from VF02. The error says 'Tax statement item missing for tax code AA'
Any idea??
Prase

Dear Prasanth,
Please review note 112609 and 400766 carefully, which explain the
tax rules.
The FF805 error is most likely triggered due to configuration in
the pricing procedure.
If an active tax condition record is found (for example on UTXJ), even
though it is statistical, the tax code (linked to the record) is then
distributed to the active price conditions for that item pricing.
When it passes to FI, the active tax condition is passed but not
the price because an active price condition cannot be found.
In the SD-FI interface, for every price condition sent over,
there MUST be a tax condition sent over, hence the FF805.
I think may be what is happening in your case.
If after setting reference steps in your procedure according to the
guidelines in 112609, you still encounter the FF805, please let me know.
Hope this is helpful. Thank you.

Tax statement item is missing for tax code E0 error

Hi Experts!
I am trying to enter an incoming vendor invoice via MIRO, and I am getting this error message when I try to simulate/post it. The error message is "Message FF805 tax statement item is missing for tax code E0". I checked the purchase order, and nothing seemed to be wrong. I also looked through the SAP Notes, but could not find anything useful. How to fix this? Any help will be greatly appreciated and points too! thank you for your time!
Best Regards,
WC

Hi WC,
Please check notes 112609 and 400766.
For the accounts which are posted to on the simulation screen, set them to either a '*', '+' or a '-' as per note 395919.
Please assign points if it useful.
Regards
Ravinagh Boni

FI-SD Tax statement item missing for tax code R4

Dear,
I create a sales order in ECC 6.0, there are a sales type condition=0 and a tax type condition amunt =0, there are an other type condition <>0 without taxes. I create the billing document without problems, but when I release to accounting appear the following message:
"Tax statement item missing for tax code R4
FF805
No tax item exists for tax code R4 in a G/L account item. A possible
cause is an incorrect transfer of parameters by the application to the
Accounting interface."
I believe that the problem is that the type condition of taxes is = 0 and when I release to accounting and happens to FI gives the error. This works correctly in version 4.5

You require to Check the Condition Record for the same. You must have by oversight not maitained Tax Code. This is the highest probability. If this is the case, then there are 2 options to handle the same.
Option 1:
Cancel Billing Document --> Reverse PGI --> Cancel delivery --> cancel Order & update condition record & follw the regular sales cycle of creating Order --. Delivery --. & so on
also try to maintain the Tax Code in Condition record & update pricing in Billing Document. may be this may work.
Option 2: In Dedug mode: Force the Tax Code in Billing document with the help of Abaper.
Regards,
Rajesh Banka
Reward points if helpful.

Tax statement item missing for tax code O1- VF02

Hello,
We are trying to release a Billing document via VF02 and we are getting the below error message.
Message no. FF805
Diagnosis
No tax item exists for tax code O1 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure
Enter an OSS message.
Please suggest.
BR,
Zulfikar

Please refer to the following SAP Note for a possible solution to your issue.
https://service.sap.com/sap/support/notes/971253

Tax statement item missing for tax code S1

Hi Guys
I am trying to release an invoice to accounting, and the above error comes up
"Tax statement item missing for tax code S1"
Message no. FF805
Diagnosis:
No tax item exists for tax code S1 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
Procedure:
Enter an OSS message
Please help.
Edited by: kofiyahya on Jun 14, 2009 7:10 PM

Hi kofiyahya,
Please Go thru the threads below,
Error : Tax statement item missing for tax code
FF805 Tax statement item missing for tax code
FF805 Tax statement item missing for tax code O0
Tax code error
Thanks,
Swamy H P

Tax statement item missing for Tax code XH

Hello,
We are trying to release on SD Invoice to accounting and we are getting the following error:
'Tax statement item missing for TAx code XH'. Message no. FF805'.
Has anyone seen this error before in this situation? If so how did you fix it please?
thanks for your help.
Brett

Hello,
Please check whether the following SAP Notes solves your issue:
Note 886536 - Collective processing for billing document results in FF 805
Regards,
Ravi

JPU1 100- in FTXP for tax code U1

Similar Messages

Maybe you are looking for