JRE 7u25 ignores Proxy and fails attempting OCSP Direct

We were running JRE 7u17 on Windows 7 with Firefox 17.0.8 without an issue. We upgraded to JRE 7u25 and now Java does not run at all. In reviewing the console logs we noticed that entries such as the following that seem to suggest that the JRE is not following the proxy configuration from IE:
network: Connecting http://ocsp.verisign.com/ with proxy=DIRECT
We hard coded the proxy in the Java control panel application, but that has not helped. We have also configured the advanced Java control panel settings so that certificate revocation checking is disabled. Nothing we seem to try appears to have any impact on this problem. We do not allow internal systems to directly connect to the internet, so if certificate revocation checking does not use the proxy, the certificate revocation list is not going to be accessible. This seems like a bug. We also want to stand up private networks from time to time. How can we put java on a none internet connected system if it is going to require certificate revocation checking from Verisign?
Are we missing a step in the configuration for 7u25? This doesn't appear to be working correctly.

It has been my experience that JRE does not respect any sort of method of forcing it to use a proxy in 1,7 for specific sites.
I can't find the article but the JRE will look at deployment.config before even looking at what the specific java control panel settings are.
Try setting the console to reload the config and then display what configuration it is actually using. That way you could at least tell where it is pulling it's settings from.
I had no luck unfortunately

Similar Messages

With automatic proxy discovery autoupdate dose not detect proxy and fails

When automatic proxy detection is used (for example in corporate network environment) FireFox correctly detects internet proxy server. Autoupdate feature fails as it does not detect the proxy and tries direct internet connection.

Hi,
Sorry for the late response.
Since the issue is complex and difficulty to troublshooting, we discussed for some time corssing the specialty. Here is some direction we may let you know to do further troubleshooting:
capture network trace to confirm whats happening across the wire.
confirm the wpad.dat is the expected.
If you have any difficulty when doing this, we suggest you to contact with IT Pro Support via the link below:
http://technet.microsoft.com/en-us/ms772425?WT.mc_id=SMCfoot_ENUS_TEXT
I think it can help you define the root cause via some deeper tools due to the complicated symptom you have.
I appreciate your understanding and time.
Best Regards,
Annie Gu

Multiple Passed Authentication and Failed Attempts for the users

Hi,
I encountered the following error logs in the ACS CSAuth folder. I did logging to full to find out more about the process involved in the PEAP Authentications.
=========================================
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Service-Type=2
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Framed-MTU=1300
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: NAS-Port-Type=19
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=201
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: EAP-Message=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Message-Authenticator=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-NAS-Vendor-14=13
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-Service-ID-0=0
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PolicyMgr::SelectService: context id=14824; no profile was matched - using
default (0)
AUTH 09/13/2007 09:41:33 I 5081 8672 Done RQ1152, client 2, status 0
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1077.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1026, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 1554 9668 pvAuthenticateUser: authenticate 'STAFPSAS\shimah' against Windows Database
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1026, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1078.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1079.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1080.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2121
AUTH 09/13/2007 09:41:34 I 5094 9668 Worker 5 processing message 1081.
AUTH 09/13/2007 09:41:34 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\salasiah'
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: error decrypting non fragmented data.
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: SSL send alert fatal:unexpected_message
AUTH 09/13/2007 09:41:34 I 5081 9668 Done RQ1027, client 50, status -2120
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 842.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1040, client 2 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 5081 8672 Done RQ1040, client 2, status 0
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 843.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1152, client 2 (127.0.0.1)
=========================================
Can anyone suggest what could be the cause of the error?
I suspected something to do with the certificate. Please advise.
Thanks.
Delon
Thanks.

If ACS and Supplicant or only ACS is enabled Fast Reconnect option, authentication will fail.If you are using XP SP2, it'll be fixed with applying KB885453 patch or simply just disable FAST Reconnect option at ACS. Also make sure user account trying to authenticate has a valid entry in active directory.

Pacman tries to satisfy dependency of an ignored package, and fails...

sudo pacman -Suy
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
--> Searching for upgradable repo packages...
:: Starting full system upgrade...
warning: awesome: ignoring package upgrade (3.3.4-1 => 3.4.3-2)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: awesome: requires libev>=3.80
For some reason I cannot install any packages anymore. No matter if I try a system update or try to install any package, the last two lines always appear. I think that's especially weird because as you can see, I'm ignoring awesome.
I don't really know how this happened; the only thing I really did before was trying out bauerbill, but I think that might be more of a coincidence.
Any ideas?

Essentially libev is trying to be updated to 3.9-1 on your system. But the old awesome you are using requires libev-3.80. This is stupid numbering upstream so is causing the issue. If you really want to keep awesome at that old version, do a "pacman -Sd libev" followed by your "pacman -Syu". Remember, -Sd is dangerous, so do not use it unless you are sure you need it...

Shockwave Player ignoring proxy settings?

For security reasons, ALL outbound user traffic is proxied.
In at least some situations, the Shockwave player appears to
ignore browser proxy settings and make attempts to go
directly to Internet sites on ports 80,443,1935. This is filling up
our
firewall logs making them less useful for real
troubleshooting. The client should always use the HTTP proxy and
NEVER
attempt direct connections to Internet hosts. Can we control
this behavior on the client in any meaningful way? I have read:
http://www.adobe.com/devnet/flashcom/articles/firewalls_proxy02.html#
and what we're seeing appears to be default behavior. Surely
this can be controlled client side and we are not at the whim
of the way the client is called by HTML served up from who
knows?
For an example of this, see --this is a Viagra ad...sorry,
but this is the one I was able to track down;-):
http://ads.pointroll.com/PortalServe/?pid=511654F38020070808222931&pos=h&flash=9&redir=htt p://us.ard.yahoo.com/SIG=12jc7dq14/M=607608.11098438.11852106.8528710/D=sports/S=96625734: LREC/Y=YAHOO/EXP=1194540739/A=4834290/R=0/id=CTURL/*$CTURL$&r=0.7514780048609885

I am running into the same issue with a few
sites...especially since the TCP timeout to realize that is has to
revert to a proxy is not conducive. I would think a client side or
registry setting would fix this, but cannot find where to change
that. Any ideas?

Apps locked / frozen and on going to setting and rest it asks for pass code. Use standard one that I use all the time and it states 1 failed attempt. I have not forgotten pass ode as I use it 20 times a day. Over 70 years of age so make the response simpl

The 3 apps required updating but they have frozen. Did not realise this until Candy Crush froze. Went to reset and it asked for pass code. I entered standard code and it stated one failed attempt. I may be over 70 years of age but have not forgotten pass code!! I hope that the solution is simple!!

If your iPad was used by another person in the past, it may be asking for their passcode.
If your iPad has been synced with a computer before, restoring with your computer should fix it now.
Read all directions.
Per these directions...
http://support.apple.com/kb/HT1212

Amended PO attempt to trigger output and Failed

Hi,
In the application monitor out put errro's, i have the above said error "Output error in purchase order 65000XXXXX for output medium MAI "
and in the out put log i am able to see below log.
Search Result: 1 Document Output Status Changed Repeated Manual Generat.on Generat.at Changed on Changed at Medium Actions
Incorrectly processed        27.04.2009 09:42:06 27.04.2009 09:42:07 Mail
Output Log Message Type Message Documentation
Information Date: 27.04.2009 Time: 09:42:06
Information Name of the Smart Form: ZEBP_PO
Information Processing class: CL_PD_PO_PROCESSING_BBP
Information Processing method: PROCESS_BBP_PO_MAI
Error Status does not allow output (held?)
Error Document not sent to
Error Action could not be successfully executed
Amended PO should not trigger output and not triggered. but the question is why it attempt to trigger output and failed
Can any one please let me know where i can see why system attempt for output and failed
Regards,
Jai

Resolved

According to Apple, my passwords are incorrect, I've forgotten my birthdate and I am unable to access my account that I've had for years. I just want to access my mail and I'm logged out for too many failed attempts

I need help with unlocking my 'locked' account. According to Apple, my birthdate is inaccurate, my passwords are incorrect and due to too many failed attempts, I'm without email. Please Help

Boot from the installation DVD, then go to Utilities/Password Reset.

HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

HT4108 I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially Unlocked. In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it

I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially unlocked.
In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
any idea how to do this?
Please advice

gencml wrote:
We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
any idea how to do this?
Please advice
You need to visit Apple Store, and show ownership proof in case of forgotton pass code.

Safari ignoring proxy username and password

I have an iPad2 and an iPad1. If I enter a username and password in the proxy settings for our company WiFi network, the iPad1 works flawlessly, the iPad2, however, ignores the username and password, and prompts for it onscreen. If I enter the username and password in Safari, it only remembers it for that session.
I have tried in both iOS 4.3 and 4.3.1, no success.

Unfortunately the problem is still present after upgrade ios to 4.3.4 or 4.3.5 . Some ipad2 (and iphone4) ignoring proxy username and password.
Has anyone solved this problem about authentication proxy ?
Thanks.
Alessandro Ghezzi
EDP E Servizi S.p.a.

Tries and fails to update at each browser start. How do I turn off auto update attempt?

Slows Firefox loading and update attempt always fails.
I just want to turn off the auto-update feature. How??

davefromtemple wrote:
Thomas... another bad answer. When you say...
Your Mac will never force you to update. WRONG.
When I updated to the latest software updates... I was asked if I would like automatic updates.
Unfortunately, I pressed Yes.
Now, I'm in the middle of working on something and my display goes bright white... then I get a message that says "Installing Software Update"... then the display goes bright white... the computer turns off and I need to sign on again.
AND I can't find a way to turn off automatic software updates!
You are posting in the wrong forum, please try to keep up.

HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

How can I reset my access passcode w/o having ever synced the device before? I don't remember it and now the ipad is "disabled" from too many failed attempts.

How can I reset my access passcode without having ever synced the device before? I don't remember my passcode and now the ipad is "disabled" from too many failed attempts.

You will need to reset the iPad back to factory defaults : iOS: Forgot passcode or device disabled
What iTunes purchases that you can redownload for free from the stores will show in the Purchased tabs in the App Store and iTunes Store apps, and the Purchased tab in the iBookstore in the iBooks app

After downloading the latest security update of lion 107.3, I lost the app store and when attempting to download anything lion I receive a plug in failed message?

after downloading lion security update 10.7.3 I lost the app store and when attempting to download anything lion I receive a plug in failure message, what is the fix?

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

JRE 7u25 ignores Proxy and fails attempting OCSP Direct

Similar Messages

Maybe you are looking for