JRE will crash on NT4/Win2K if not logged in as admin !

I have this problem with JDK/JRE 1.2.2 as well as with JDK/JRE 1.3. I already posted this about a year ago but didn't get any replies.
Although I have only the full JDK installed I think it is definitely a JRE-related problem:
I can only run Java apps on Windows NT4 or 2000 if I have logged in as Administrator or if I have logged in as an user with Administrator rights. Otherwise, the JRE will crash with an protection fault (don't have the DLL and address handy).
This happens regardless if I have installed the JDK as Administrator or as normal user w/o admin rights.
I can't imagine that I can only run JAVA apps with admin rights, that sounds stupid to me. Is there noone else out there having the same problems ?
Thanks for any help.
BFN,
Torsten

I am having that problem w/ 1.3.1_02 still. It does not crash, it just does not ever load. The applet does not load, neither does the 1.3.1 control panel little app. I can run it against Spicer's ViewCafe software fine if I am an admin / domain admin on an NT 4.0 network. But that is NOT going to be realistic. I have played w/ the JavaSoft registry settings, the winnt\java directory, and other permissions to no avail.
ANYONE with good information would be helpful with this annoying problem. Main businesses use NT w/o admin rights so this is a stupid problem to have to troubleshoot, I agree.

Similar Messages

Report printing failure when not logged on as admin

Using Business object XI, I have a VB 2005 .NET app that works fine when logged on with admin privileges, but fails otherwise. I've investigated and traced this down a single line of code which is the rep.PrintOut function.
The debug error report is shown at the end of this message.
Can anyone suggest a solution to this issue? Is it just a permissions problem and if so what permissions are required?
Thanks,
Steve
System.Runtime.InteropServices.COMException (0x80047E5D): Failed to open the connection.
   at CRAXDRT.ReportClass.PrintOut(Object promptUser, Object numberOfCopy, Object collated, Object startPageN, Object stopPageN)
   at WinLabel.Form1.PrintManifestLabels(String strCust)
   at WinLabel.Form1.Button1_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Hello Steve,
Thanks for the feedback. Since this appears to be a permissions issue there's one other thing to check. When the merge modules are installed there's often an option to install for "me" or for "everyone." Make sure the files are being deployed for everyone.
Here are links to some RDC and .NET documents as well as the Statement of Direction for the RDC. I'm not sure if you'll actually be able to pull them up though. Some documents require a login for the Service Market Place in order to view them. Hopefully these will work without logging in.
[Using the Report Designer Component in Microsoft Visual Studio .NET|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d]
[SAP Note 1217809 - Is the Report Designer Component supported in the .NET development environment?|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001217809]
[Crystal Reports Report Designer Component - Statement of Direction|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289]
I hope you're able to track down the permissions issue!
Sincerely,
Dan Kelleher

How do you reset Admin password (when not logged in as Admin)??

Here's my predicament. I set up 3 accounts on our laptop - one for me and my wife (Standard accounts) and a House Account as the only Admin. Now, I don't remember the password for the House Account, which serves as the Admin.
I am trying to load new software, but it request administrative privileges. To make matters worse, when I try to install the MAC OSX startup disk (like the help manual says you should to reset the admin password), before my computer will restart the startup disk, it asks me for the Admin password. Because I am not logged in as the Admin, I can't even restart the computer when prompted by the startup and install the OS again.
Any suggestions or help with this issue?
Eric

Did you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.

Annoying failures and reminders when not logged in as admin

how can i stop apple software update (asu) from constantly bugging me when i'm not logged in as an admin?
i like the automatic check (noone likes updating everything manually) but every apple program fails to install unless you're an admin. it would be much better if asu checked before it looked for updates, or let people know there are updates but they cannot be installed unless they are logged in as admin.
what's worse is if it downloads an update and the install fails because you're not an admin, asu downloads the whole file again when you do log in as admin. these files should be cached in a temporary folder in asu's 'program files' folder until the install is successful or a newer version is available.

freakin' awesome! of course, i never saw that scheduled task because it only shows when logged in as an admin, and apple is the only program i have that has its schedule there rather than in its own interface.
now that i have seen this it seems stupid that so many programs don't have their updates scheduled there.
i have not tested it as such but i have a task in my limited account that only runs when i'm logged on so i know that this will work. i also changed the schedule from a set time weekly to ‘at logon’ so it will actually get a chance to run.
edit by online?:
the scheduled task sets asu to run in the SYSTEM account but then asu seems to launch the installers with the locally logged on user's credentials, so this fixed my problem but not the underlying cause.

Error occurs when not logged in as admin

I have service pack 3 installed which includes 1&2. I think my error is more in depth. We cannot give all users power user access either.

freakin' awesome! of course, i never saw that scheduled task because it only shows when logged in as an admin, and apple is the only program i have that has its schedule there rather than in its own interface.
now that i have seen this it seems stupid that so many programs don't have their updates scheduled there.
i have not tested it as such but i have a task in my limited account that only runs when i'm logged on so i know that this will work. i also changed the schedule from a set time weekly to ‘at logon’ so it will actually get a chance to run.
edit by online?:
the scheduled task sets asu to run in the SYSTEM account but then asu seems to launch the installers with the locally logged on user's credentials, so this fixed my problem but not the underlying cause.

2.1 Upgrade can not log in as Admin

I upgraded from 2.0 to 2.1
ran the update.sh
verified the version
When I go to log into the Webadmin using my adin login, I only get
access to "end user" features.
What file contains the admin login information on the gms server ?
Also, what does the previewfeature script enable ?
Steve

Thanks - YES - root does work ....
The Admin section of the configengine.xml has not changes and I can see
the 2 users who have admin rights.
The web interface comes back with the message :
Invalid user name or password
I'm using GW authentication
For now I'm ok as long as I can manage GMS
Steve
Andy Konecny wrote:
> In article <aupFw.4404$[email protected] m>,
> Steve wrote:
> > When I go to log into the Webadmin using my admin login, I only get
> > access to "end user" features.
>
> Can you get in as the root account of that user?
> Are you using LDAP or GroupWise authentication?
> The documentation on the topic should point you in the right
> direction.
> Https://www.novell.com/documentation...gwmob2_guide_a
> d min/data/admin_con_admin.html
>
> and if you are still stumped, post more details.
>
> I believe the Previewfeature represents some of the new functionality
> that has been added, but isn't quite finalized yet. Specifically I
> believe it is the First Look support for the Microsoft Outlook client.
>
>
> Andy of
> http://KonecnyConsulting.ca in Toronto
> Knowledge Partner
> http://forums.novell.com/member.php/75037-konecnya
> If you find a post helpful and are logged in the Web interface,
> please show your appreciation by clicking on the star below. Thanks!

I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?I can not get my Adobe Photoshop Elements 8 organize to open. The ed

I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?

Hi,
Which operating system are you running on?
Try starting the organizer while holding down the shift key. Hopefully, it should load the Catalog Manager.
Select your current catalog and click on the Repair button. Once it has finished, click on the Open button to see if the catalog opens.
Good luck,
Brian

Logic prox will crash when editing notes in the editor.

as im editing the veocity on single notes in the editor it will crash after some edits.
does reinstalling help with some isues?

Vic,
Same thing happened to me a few days back. I closed Logic, removed the Preferences files (listed below), and then ran the Logic Setup Assistant. All is well now.
Here are the files I removed:
com.apple.logic.pro
com.apple.logic.pro.cs
com.apple.logic.pro.plist
com.apple.logic.SetupAssistant.standard.plst
LogicProject7
plus the folder:
Users/<user name>/Library/Preferences/Logic/PM Data
All of these were found in:
Users/<user name>/Library/Preferences
or
Users/<user name>/Library/Preferences/Logic
I am not sure I needed to remove all of these, but I did. Maybe someone else can ring in with a list of the exact files one should remove.
Hope this helps,
Mitch

JFileChooser (again!) slow in JRE 1.6.14 on some machines, not others

I am running ImageJ (from the NIH) on several of our machines and on some machines JFileChooser is lightning fast, while others exhibit the same slowness spoken of in another JFileChooser thread that is now in a locked state. We open large image files (tif, png) located on our SAN and from the network traffic I see in Windows Task Manager while opening a folder containing the images I would guess that JFileChooser is actually opening the files (intentionally or not), not just obtaining a folder listing. It's similar to the same issue of opening a large folder of images with the view set to thumbnails - it takes about the same amount of time. I have tried the suggestions in that thread to no avail - the environment the machines are running is:
Windows XP SP3
Java JRE 1.6.0_14
Can anyone comment on what JFileChooser is doing and how I can get it to stop this? Is it a Windows environment setting so that the native API calls made by JFileChooser will behave differently? Thoughts?
Thanks,
Tom

I can't be absolutely sure, but we have several seemingly identical machines used for the purpose of reading medical images and several of them appear to work correctly (very fast loading and population of the folder's contents) and others don't. I have been using eclipse to enhance the software tool we're using (ImageJ) and using the debugger I can see that when the JFileChooser object is being instantiated and populated with entries a tremendous amount of network traffic occurs. This network traffic is equivalent to the amount I see when the same folder is opened in My Computer using a thumbnails view of the folder contents. Apparently, the network is delivering approximately 300-400 MB of images. As far as configuration of the Windows machines is concerned I haven't found a significant difference yet, though I admit I am not a Windows desktop admin and may not know of some configuration item that could be responsible. I assume (though could be mistaken) that both My Computer and JFileChooser are ultimately using similar API calls to get the folder content entries?

Please help if you can, my user ID will not log on and it has all my data in it.

The primary user ID (an admin ID with all the valuable info I need access to) will not log on from a restart or initial power up. I was able to go into another user admin ID once and change its password which got me in once but now no passcodes will work.
The primary admin user will not log on at all. it doesn't give any error messages. It just flashs for a moment and then goes back to the user selection screen. I have the same apple ID on my iphone and can access all iCloud items associated with it. Just the user won't work. Another admin user and guest user work fine.
Before the user crashed we had some internet issues where it wouldn't log onto our shared network at our complex which has about a dozen registered users associated. Some sources have suggested that we were hacked and that security problems have shut down that user. We were in the British Virhin Islands when it happened. We are in the US now and the other user IDs are still working gone and the new Internet source was picked up through wifi without any trouble.
There is is so much info In that user ID that we need access to. I tried to use timemachine through the other admin but it will not reset through it. I have an external HD time machine backed up as of Feb 15 which would get us back most of the data, but I can't seem to reload that info either. Should I wipe out the whole system and start again? Maybe just erase that user? I'm not sure how to even do that...
thanks for for any and all assistance!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Use of contextmenu will crash in new flashplayer

hi all,
i am using flex 2.0 final addition to create context menu
support in my application
i am sucessfully able to create context menu but when i am
trying to select any item from contextmenu in flash player 9.0
final release it will crash the aplication insteadof opening a
popup menu according to my application
so can any one tell me what was exact prob to solve this
situation because right now i am migrating my application frm flex
beta 3 to flex final...and this menu also work perfactly in beta3
but same thing not working in final version...
here it is code..
ContextMenu myContextMenu = new ContextMenu();
var item:ContextMenuItem;
this.contextMenu = myContextMenu;
item = new ContextMenuItem("Criar pasta para "+folder);
myContextMenu.customItems.push(item);
item.addEventListener(flash.events.ContextMenuEvent.MENU_ITEM_SELECT,
function():void{menuItemCreateFolderHandler(folderData);});
private function
menuItemCreateFolderHandler(folderData:String):void
vAction="create";
showWindow(true,folderData);
plz give me proper solution aasp...
thanks in advance

Edit:
DOH! Please ignore my question; I figured it out. It looks
like it was related to the fact that I was attempting to remove the
ContextMenu item on mouseOut of the button, and when moving the
mouse to select that menu item, the mouseOut occurred.
Was a solution ever found for this, or a bug filed?
I'm running into similar issues now that I'm starting to play
with ContextMenus. The menu options appear fine, but when an option
is selected, the browser crashes.
In the sample below, 'ROOT' is added to the context menu for
the panel. Clicking this causes no problems. Hovering over either
button adds a new menu entry below 'ROOT' and if it is clicked,
that is when the crash occurrs.
Sample Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application pageTitle="Testing ContextMenu" xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="addContextMenu()">
<mx:Script>
<![CDATA[
import mx.controls.Label;
import mx.controls.Alert;
public var myContextMenu:ContextMenu = new ContextMenu();
private function addContextMenu():void
myContextMenu.hideBuiltInItems();
myContextMenu.addEventListener(ContextMenuEvent.MENU_SELECT,
menuSelectHandler);
myPanel.contextMenu = myContextMenu;
var item:ContextMenuItem = new ContextMenuItem('ROOT');
myContextMenu.customItems.push(item);
item.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,
menuItemSelectHandler);
private function secondMenuAdd(buttonLabel:String):void
var item:ContextMenuItem = new ContextMenuItem(buttonLabel);
myContextMenu.customItems.push(item);
item.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,
menuItemSelectHandler);
private function secondMenuRemove():void
myContextMenu.customItems.pop();
private function
menuItemSelectHandler(event:ContextMenuEvent):void
private function
menuSelectHandler(event:ContextMenuEvent):void
]]>
</mx:Script>
<mx:Panel top="10" bottom="10" left="10" right="50"
id="myPanel" layout="horizontal">
<mx:Button label="change menu" id="changeButton"
mouseOver="secondMenuAdd(event.target.label)"
mouseOut="secondMenuRemove()" />
<mx:Button label="second menu" id="secondButton"
mouseOver="secondMenuAdd(event.target.label)"
mouseOut="secondMenuRemove()" />
</mx:Panel>
</mx:Application>

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

You'll likely need the assistance of some sort of 3rd party software. Keep in mind that the photos on your iPod are only scaled down thumbnail versions of the originals. So even if you do manage to copy them backt to your PC, they will not be in their full original resolution.
Do a simple Google search for "copy photos from ipod" and you should get a number of hits that can assist you.
B-rock

Replace footage will crash Premiere Pro CS6

Hi,
I have a serious problem with Premiere Pro CS6 when I want to replace footage in the project. I need to replace .R3D files to ProRes files that I encoded via MediaEncoder.
When I replace the clip (.R3D to ProRes) in project browser, Premiere crashes every time announcing:
"Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down..."
When reopening the project (the recovery project Premiere Pro tried to save while crashing), the name of the file is still the same, but the content of the file has changed to the ProRes clip (they are different in resolution). When I replace the clip again, the name of the clip also changes and does not crash - however the clip was already changed even the name wasn't.
If I then replace another clip (.R3D to ProRes), Premiere will crash again. This happens every time I try to replace a new clip (.R3D to ProRes).
If I replace the other way around (ProRes to .R3D), Premiere will not crash.
Please help. This is very annoying problem, and I need this resolved as soon as possible!
Thanks!
(MacPro, OSX 10.7.5, PremierePro CS6)

Hi again,
nobody has an idea why this happens?
Well, I made further experiments, sent crash reports to Adobe, no reply.
The problem is still: when trying to replace footage (.R3D => AppleProRes), PremierePro crashes every time.
The following announcement pops out (to click OK):
Adobe Premiere Pro
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Earlier PremierePro crashed and had to force-quit. Now I just have to quit it - it stays on but does not work and makes a pop-up (to click Continue):
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/slightlybuilt/PremierePro/UIFramework/Make/Mac/../../Src/Worksp ace.cpp-209]
Again, if trying to replace footage the other way around (AppleProRes => .R3D), PremierePro does not crash.
Please, help soon! Thanks.

Simple Set of Characters will Crash Many Mtn. Lion Apps

Apparently typing a few selected characters quickly within many apps in a Mountain Lion system will immediately crash those apps. It sounds like an urban myth but it's not. This is just an FYI. Until this is fixed, the worst that might happen is to receive an email message or imessage that contains those characters. One of the comments posted to the second Web page below indicates that doing that will crash Mail or Messages on a Mountain Lion system.
Here's a good description:
http://9to5mac.com/2013/02/01/dont-type-this-phrase-on-your-mac-unless-you-like- crashing-it-file/#more-260798
Also read the comments posted at the bottom of this page--they have the most useful information:
http://openradar.appspot.com/13128709

Strangely hilarious.

(1) understanding why Firefox consistently crashes; (2) why Firefox does not acknowledge when "cookies" ARE enabled.

Firefox will crash while I am using the internet...no warning, no apparent reason...just an apology for the crash. Why?
Today, when using an Adobe application Firefox did not recognize or allow the website to recognize that "cookies" WERE enabled. I kept receiving a message that the website could not proceed until same was enabled. Even after several redoing the enabling instructions, the message report the cookies were NOT enabled. Yet, as I write this the screen menu drop down in Tools, Options shows the cookies is programmed and are enabled. Why? How to fix?

Please upgrade your browser Firefox 7 where we fix ton of crashes and freezes:
* getfirefox.com

JRE will crash on NT4/Win2K if not logged in as admin !

Similar Messages

Maybe you are looking for