Jrew Install error message

Trying to install 8i PE on my Win 98. Get the following error message...
JREW caused an invalid page fault in
module KERNEL32.DLL at 017f:bff87f05.
Any suggestions on how to resolve would be greatly appreciated.

It won't work on ME. Look back in the discussion forum about a month ago, some people wrote in about how you might change your registry to get it to work. Didn't work on my system though. Good luck!

Similar Messages

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

How do I fix an install error message 0x8007054f

How do I fix an install error message 0x8007054f

https://discussions.apple.com/thread/3029902?start=0&tstart=0
old link may be broken new one right here
http://support.microsoft.com/kb/946414
Just wanted to make sure you understand that if you do have question, there are the odds someone already answered it, and it wasn't me.

What should I do when I get failure to instal error message?

what should I do when I get a failure to install error message?

Could you please provide some more details like Product you are installing, OS details etc.

Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

i upgraded to Lion and now itune upgrade will not install (error message appears)

iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

Install error messages

I get the following error messages when installing CS6. Anybody have any idea if this is a problem, or if these are components of the various programs that I will never need?
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ... WARNING: DF012, DW029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 9 error(s), 4 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
WARNING: DW029: Custom Action for payload {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 wants to skip this payload. Skipping this payload.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
WARNING: DW029: Custom Action for payload {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 wants to skip this payload. Skipping this payload.
----------- Payload: {39C9FB9C-7A84-11E1-B574-D095DF20721F} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at /Volumes/CS6 DesWebPrm 1/Adobe CS6 Design and Web Premium/payloads/AdobeFireworks12-mul/OEM(Seq 3600)
----------- Payload: {76A4887E-7A85-11E1-88DE-92A96E70B8CF} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at /Volumes/CS6 DesWebPrm 1/Adobe CS6 Design and Web Premium/payloads/AdobeFireworks12en_USLanguagePack/OEM(Seq 84)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirMPRlZQ4A/Assets1/Application/Adobe Illustrator.app/Contents/Frameworks/AdobeMPS.framework/Versions/A/Resources/PS3VM32" to "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/AdobeMPS.framework/Versions/A/Resources/PS3VM32" (Seq 1855)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1855)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirJfJs54lL/Assets1/Application/Adobe Photoshop CS6.app/Contents/Frameworks/AdobeLinguistic.framework/Versions/3/AdobeLinguistic" to "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/AdobeLinguistic.framework/Versions/3/AdobeLinguistic" (Seq 277)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 277)
----------- Payload: {327492D4-78EB-11E1-8ABE-84C55623D190} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirVMmrsTBD/Assets1/INSTALLDIR/Adobe InDesign CS6.app/Contents/MacOS/Required/CellStyles.InDesignPlugin/Versions/A/CellStyles" to "/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Required/CellStyles.InDesignPlugin/Versions/A/CellStyles" (Seq 3016)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 3016)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe InDesign CS6 Application Base Files: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core: Install failed

Please refer : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html

'Wi-Fi: Hardware not installed' error message, as if no modem

I am using a MacBook Air 13" late 2013 with Yosemite. I am not at home but have a valid working wifi network available in a University. Suddenly my internal modem is not recognised. What to do?
'Wi-Fi: Hardware not installed' is the error message as if it is not found.

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Install error message after logging off OSX

When logging out of Mavericks, I get an error message on the screen as it goes to black that asks me do I want to abort the installation or continue with the installation. It closes out to the login screen after pressing either button you press, one says "abort" the other states " "continue". This started a few months ago and I can't seem to remember if there was an install issue on an update to an app or if it was something else because you only get the error message when you log out of the user account or shut down the computer. I updated to 10.10.1 and it still appears exactly as with Mavericks OS.
I don't have time to take a screen shot of the message in a yellow box as it disappears quickly, but it reminds me at the log in window in background via a female voice that the MAC needs my attention.
Cant get rid of message, any help appreciated.

Hi ,
Thanks for joining the EE Community.
Have you tried clearing the cache in your web browser or using a different browser?
Thanks
James

HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
However... I seem to have fixed the issue after 2 months of trying.
I followed the advice of this page:
http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
Good luck.
Dom

Quicktime not installed error message upon installation of Itunes

HI,
I have Quicktime already installed (7.7 1680.34) and I have Itunes (10.4.0.80). Now when I seek to update to the latest Itunes I receive an error message saying 'Quicktime not installed' and then it stops the installation. Same thing happens after reinstallation of Quicktime. -What to do now?
//J Sundberg

Try removing QuickTime from Control Panel before installing iTunes 10.4.1.
Check out this Apple document, if you need a walkthrough of uninstalling from Control Panel -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Make sure you read the detailed steps, if you run in to a problem.

ITunes / Quicktime won't install - error message during in installation

My computer, a Dell running with Windows Vista, has not been able to have iTunes & Quicktime installed on it in months. I've attempted to install it a countless number of times & tried a variety of things with my computer to install it but it just doesn't work - I get the same error message everytime. I can't even remember what happened to make it start acting so ridiculous.
It always starts out looking good and everything seems to be working pretty well, the green bar filling up pretty quickly, but then the 'Status' gets to about 'Publishing product information' and the error message pops up and I can't install it. It goes along the lines of "A error occurred during the installation of assembly: ..." then it goes on to say 'Please refer to Help and Support for more information. HRESULT: 0x8007054F'. Here's a screenshot of the error message with the long whatever on it:
http://i46.tinypic.com/qoesm1.png
I believe I get the same message even when I attempt to download the two software separately (iTunes & Quicktime).
Can any one tell me what needs to be done? I have no idea what to try anymore. All help will be much appreciated. Thank you .
P.S.: If it helps, I can't really reinstall Internet Explorer (removed it when I downloaded Firefox).

Thanks!
(3) And I do not believe I have Microsoft Visual C++ 2005 installed on this computer, as I just tried to install it and I received this error message: http://i45.tinypic.com/a3m7bc.png
Okay ... that rules out one possible treatment. Sometimes people with the redistributable installed can get past this by applying a security update for it ... but it looks like the same sorts of problems are preventing it from installing.
(2) And last time I checked my History I had several failures I believe, however now I only see one failed update, that being Update for Windows (KB944036). The error code listed 8000FFFF. Apparently it's an update for Internet Explorer 8.
The other primary strategy we (I?) have for dealing with these is to attempt to treat any underlying issues on the PC that prevent Windows Updates from installing. Although I have a sneaking suspicion that your 8000FFFF is related to your IE being uninstalled, I think we'd probably better try following up on the following document:
[Error when you download updates using Windows Update or Microsoft Update: 8000FFFF|http://support.microsoft.com/kb/946414]
After applying those measures, do your Windows update and/or iTunes installation failures clear up?

Vista Service Pack 2 install error message and Realtek incompatibility

Just want to inform that service pack 2 install gave me an error message when I installed it on a clean rebuild of my Toshiba laptop. Something about an incompatible driver. As I had already installed the latest drivers from Toshiba pages, I choose the 'ignore and continue' action at install, and the update successfully completed.
I then ran the Windows Upgrade advisor utility (just search a Microsoft website to find it) which checks for hardware/driver compliance with Vista.
Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
The wifi connection with this laptop functions well, with the only 'problem' being a 45 second delay when waking up from sleep mode to being able to open a new web page. This is the time it takes to establish a connection to my router/modem.

> Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
You could try the Realtek WLan driver from the Realtek driver page.
There you can find the latest Realtek drivers for different Realtek chips.
But to be honest I would not be worried about this massage.
Something like that can happens always after any installations of the Microsoft service packs.
I remember that many drivers were not supported by SP1 but they ran properly
So take it easy ;)

10.8.5 won't install-error message javascript

I got this error message when trying to update from 10.8.4 to 10.8.5. App update said I don't have any updates to make but I'm not running 10.8.5 and it is listed as a purchased program in the app store.
"OSX updated combined can't be installed on this disk. An error occured while evaluating JavaScript for the package."

Nope. Same error message when trying to install just the 10.8.5 update rather than the combo or the supplemental. Any other ideas?
I can't even find this error message when I search Apple Support pages.
I'm headed for the app store to re-download Mountain Lion which should give me 10.8.5. It is 4.4 GB so it must be the whole thing.

PowerBook G4 install error message

Hello
I've got another thread about the nightmare that is installing this **** OS here on a PowerBook in this forum. But, I just got a new error and I think that it deserves its own thread.
Background: Installing 10.5, PowerBook G4, 1GB RAM. Hard Drive had 10.3.9 on it, tried an upgrade and that failed miserably. We got the data off of the PB and wiped the HD clean. The HD is less than 3 weeks old BTW.
Tried installing again a little while ago and it got to 39 minutes remaining - I was tense and anxious. I didn't even want to look lest I jinx it and it all goes to ****. Well, guess what....
Here's some of the stuff I see here:
System Failure: cpu=0; code=00000001 (Corrupt Stack)
Exception state (sv=0x1e670a00)
PC=0x000B2370.........; XCP=0x00000098 (System Failure)
Backtrace:
backtrace terminated - frame outside of RAM: v=0x1F94BB10, p=000F8E0B
Proceeding back via exception chain:
Exception State (sv=0x1e886c80)
a whole bunch of other stuff
BSD process name corresponding to current thread: payloadExtractor
Kernel Version:
Darwin Kernel 9.0.0
root :xnu-1228`1/RELEASE_PPC panic
Repeats the backtrace error messages
BSD process name corresponding to current thread: payloadExtractor panic: We are hanging here...
So, that's the gist of the stuff I see here on her screen. The OS screen is still in the back, this is written over it.
Ideas? Should we all go punch Steve Jobs now?

Hi,
I came across an error similar to this, (though not with Leopard). The error was with an eMac that would not install apps. Installers would return errors such as "Data does not match". It turned out that some RAM was faulty and was corrupting the data as it was being extracted into RAM after which it was failing the checksum.
When you install OS X, (Leopard or previous), as the HD is going to be installed on the OS is loaded from the CD and is installed into RAM to run the machine. Once the install is initiated data is copied from the disc into RAM extracted/expanded and then copied onto the HD. As such installing an OS is a RAM intensive process.
Thinking about it, I have had errors showing up when reinstalling an OS which didn't show up before because the RAM had never been fully used before.
Cutting to the chase I would say that there is a faulty bit of RAM in the PowerBook, (there is likely to be two 512MB DIMMS). I would try removing one and trying the install again. If it fails then try the other bit of RAM and do a re-install. If it works I would try testing the other bit because faulty RAM can cause all sorts of data corruption that can sometimes take a while to manifest itself.
Hope this helps
Robbie

ITunes will not install, error message.

So, last week my itunes update download the lastest version of itunes. When I went to click on the itunes icon to went to install.
It gave me the error message "the installer has insufficient privileges to modify this file c:\program files\itunes\ituneshelp.resources\es.lproj\ituneshelperlocalized.dll"
Since then I have tried various solutions to similar problems listed here and other sites, including turning off the user control, unpacking the installer and installing the various parts separately, downloading older versions of itunes, removing all other apple components, installing Quicktime and then installing iTunes, etc.
Every time I get through a good part of the process and I get the same error message "the installer has insufficient privileges to modify this file c:\program files\itunes\ituneshelp.resources\es.lproj\ituneshelperlocalized.dll"
I'm about to give up... someone please help!!!

Looking through some other posts I found a solution. Go on the web and download iTunes only, do not automatically install. Then, install the file and when it askes you the destination, change the folder name (I just added a 2). iTunes then installs and all of you songs, playlists, etc. are there.

Jrew Install error message

Similar Messages

Maybe you are looking for