JSC doesn't show newly created extended DataProviders

Hi,
I've been using JSC and Hibernate for a project.
According to Sun's how to using Hibernate + JSC (developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/hibernate.html) , I've created a wrapper class which extends ObjectListDataProvider, but instead of creating the property on the SessionBean, I did it on the PageBean.
The problem is that everytime I need to add another property to a page bean using one of my wrapper classes (extending ObjectListDataProvider), after following the how to instructions (compile the project, close and reopen), it doesn't appear as a property in the Outline panel.
After a while building, cleaning, etc. I managed to get it done in one page, but on newly created pages, the property doesn't appear on the panel.
Any ideas?
P.S.: If I instantiate a ObjectListDataProvider property, it's shown correctly.
Regards,
Leonardo Eloy

IMAP issue... fixed now.

Similar Messages

  • Report "RALM_ME_FUNCLOC_LIST" doesn't show new created func. locs.

    Hi,
    if I run the report "RALM_ME_FUNCLOC_LIST" with SE38 and selection parameter func. loc. typs "S" I don't receive a newly created func. loc.
    If I do the same using transaction IH06 with the same parameter, I receive the newly created func. loc.
    The same happens I I start the initial replication for func. locs. The newly created isn't transfered.
    Any idea?
    Thank you and regards,
    Florian

    Hello Florian,
    Unfortunatly, if you look at the code a note is reffered: 772443 . There it says you cannot select from the FLTYP field (even if it is available for data entry).
    Sorry,
    Julien.

  • Portal Management doesn't show the created portal

    I have some problem with the Portal Management from evaluation version of the Weblogic
    Portal Server 7.0
    I followed the documentation from Bea and created a new Weblogic Portal Domain
    and a new Portal.
    The Portal i created worked but it is not shown in the Portal Management.
    Otherwise i have assigned this portal new portlets and other skins with EBCC but
    they are not available in the portal.
    Can anyone help me?

    This question is best suited to the Orac le9iAS Portal Security and Login Server forum.
    Thanks

  • Ipad2: Imovie was deleted, re-install doesn't show original created movies

    My daughter had created a number of movies in iMovie on the iPad.  Our first one was dropped and I took it to the Apple store and they replaced it (Thank You, Apple store Pioneer Square!!!!) 
    When I plugged the new one in, it re-installed everything, including all the movies that my daughter created, just as if it was the first iPad we had.
    Now, my other daughter(#2) just deleted iMovie, and when I re-installed it, it's like a new program, none of the movies daughter #1 created are on there.
    Seems like they must be on my computer if they re-installed on the new iPad after the first was broken.  Should I click "restore"?   Does that bring it back to factory specs or to the last backup?
    Any help is greatly appreciated!
    Note:  I've searched for this answer on my own for quite awhile now, through norums and Apple help, with no luck.

    If via iTunes on your computer you restore to the last backup then you will get whatever was stored in that backup back on the iPad - so anything that you've changed on the iPad since the backup was made will be removed from the iPad. You will need all the relevant apps on your computer's iTunes for the restore to work, as a backup contains an app's data and content, but not the actual apps themselves (so for the restore to work iTunes needs access to the apps so that it can install them and therefore their content).
    There is info/help on backups/restores here http://support.apple.com/kb/HT4079

  • Why doesn't a newly created playlist appear in the playlist section of 7.02

    I create a new playlist "File>New Playlist" and add songs from my library to it. The "Burn Disk" icon does not appear.
    In fact, the playlist itself only appears in Devices but not in the playlist section, why?

    Thanks for the idea. I checked and found that the machine serving up the database does in fact have XP SP2 installed. I disabled the firewall completely, and that solved the problem. (At first, I just unchecked the LAN connection under the Advanced Tab of the Firewall applet, but that did not do the job, I had to turn it off completely from the General Tab.)
    I also found this relevent information:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/1708e8a3106c1c3886256e5b005072fe?OpenDocument
    http://zone.ni.com/devzone/conceptd.nsf/webmain/7D0E7F20B1A7C8E486256A39005747F2?opendocument
    Problem Solved!

  • Mail doesn't see newly created document when attaching files

    If I save a file, and attempt to use Mail to attach it, Mail does not see in in the browse window. If I quit Mail and then re-open it, it then does see the files to attach.
    Has anyone seen this before? Thank you very much for any help regarding this.

    IMAP issue... fixed now.

  • Newly created task does NOT show up at SOLMAN project

    We have CHARM configured.
    However, the newly created task cannot be seen at SOLAMN's project. The existing tasks showed without issues.
    What could be the reason?  Thanks!!

    Hi Christy,
    Please refer to the spro configuration at following path:
    Scenario specific setting --> change request management -->extended config --> schedule manager
    Also refer to SAP note 927124.
    Hope this helps!
    Thanks & Regards,
    Kriti Bhalla

  • I can't create a new mailbox, doesn't show up

    When I create a new mailbox, it does not show up in the left column of mail boxes.  I read in another email on the same topic that the newly created mailboxes (I created or tried to create five or six of them that all never showed up), that they are "hidden" and that I should hover over "on my mac" and a menu will ask me to unhide mail boxes.  But I do not see the phrase "on my mac" anywhere on my mailbox list.  How do I create a mailbox, or where are the ones that I did create and are not visible?  Thanks.

    I did not find any evidence of the mailboxes on the google site.  Also, I'm new to google mail, but though I couldn't find a way to create an actual mail box in mail, there were "labels" and under the menu of all the different categories they were all checked to "show on imap."    This google account is set up on my mac mail, as I guess you might be able to see that and I do receive my employers mail from google right to my mac.  This iMac is actually my second older one that sits in my kitchen for entertainment and downstairs access, so I don't care a whole lot that I can't resolve this, though I still would like to figure it out if possible, where the created mailboxes are going that is......I just went up to my main mac (new 27").  "On My Mac" shows and when you hover over it you can "hide" it.  This doesn't seem to happen on my downstairs mac with the problem.  I can't make "on my mac" appear when I move my cursor over the mail box menu.  Because this is a secondary computer, I could very well at some wipe out the entire mail and start over, though I'm not sure how to do that being that mail application may not be easy to get back if I delete the entire app? since it's an onboard app that comes with the os?????  Just thinking out loud about what I don't know!

  • BPEL Console doesn't show any instances created

    Hi,
    We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
    Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
    The BPEL process is simple flow with one receive , transform and invoke activity.
    I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
    I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
    Please help.

    Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
    Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
    Kalyan

  • IPhoto: title of book doesn't show in the layout preview although a picture and headline was created. What do I do wrong? All other photos show in the preview normally?

    Created a 70 page photo book and now the title including subtitle doesn't show, but seem to be there, because the photo is ticked to be the title. Now I am scared to get a beautiful grey title instead of the table mountain in SA: Do I need to be worried?

    Try the following::
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later -run  Option #4 to rebuild the database

  • Newly created Web repository not showing up in explorer

    I'm trying to create an index which would finally enable me to search the 'CNN' website (following the 'how to' document : 'HOW TO SET UP A WEB REPOSITORY AND CRAWLING IT FOR INDEXING'). I'm unable to assign the web repository which I  created in an earlier step to the index because it doesn't show up in the repository/folder listing. I can't even see it under 'Content Administration -> KM Content -> Repositories'.
    What exactly am I doing wrong?!
    thanks,
    Biju.

    Hi Karsten,
    - We're on EP6 SP2.
    - Yes, I'm referring to the document you mentioned.
    - Yes, the repository does show up with a green light under KM -> Component Monitor.
    BTW, I was able to bring up the web repository now that I've specified under 'System Admin ® System Config ® Service Config ® Applications ® com.sap.portal.ivs.httpservice ® Services ® proxy ® HTTP-Bypass Proxy Servers' that everything under 'mycompany.com' must be bypassed. I'd originally specified the proxy set up in the TREX configuration, which runs on another (physical) server than the portal.
    I don't really get the connection, but essentially took the cue from the earlier reply I got.
    So, in short, I think the problem is solved at least for the moment.
    Thanks again for your help.

  • While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

    While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't  connects to the LAN server that i created in the Game.     
    Could any one help me please.

    Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
    If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
    How to log a kernel panic

  • Fixed Assets - Acquisition created doesn't show

    Hi all,
    i am having a strange problem while using the SAP Business One Fixed Assets module. Basically i have created a Fixed Assets Acquisition (with no supplier). As soon as i press 'Add' the system shows a message at the bottom saying 'Acquisition posted successfully'. Even though this message is created when i go back on the Acquisition screen that Acquisition which I have just created doesn't show. In fact if you go on the Fixed Assets Master Data details for that Fixed Asset which you used in the Acquisition document, nothing shows under the Documents tab.
    Do you have any idea of what might be going wrong?
    Thanks

    Dear Marvin,
    After you create the acquisition, go to journal entries and check the last journal entry to verify if posting has been done in terms of accounting
    Regards
    Kentish

  • Background image in extended awt.Button doesn't show.

    Hi all
    I have an applet that has only an awt.Button visible on the page. Because of layout requirements I need to style that button with a background image. I have extended the java.awt.Button like this:
         class ImageButton extends Button {
              public void paint(Graphics g) {
                   super.paint(g);
                   g.drawImage(getImage(getDocumentBase(), "../img/loadSertificate.jpg"),
                             0, 0, null);
         }and use the extended:
         public void init() {
              mSignButton = new ImageButton();
              mSignButton.setLocation(0, 0);
              Dimension appletSize = this.getSize();
              mSignButton.setSize(appletSize);
              mSignButton.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent e) {
                        signSelectedFile();
              this.setLayout(null);
              this.add(mSignButton);
         }Now everiting is ok but when the applet is loaded the background image doesn't show and only a plain gray button is visible. The interesting part is that the image does show after I click somewhere in the browser's window and later on it's always visible as expected.
    Below is part from the log from the java console:
    basic: Applet started
    basic: Told clients applet is started
    Loaded image: http://ip:8080/UserManagement/img/loadSertificate.jpg
    network: Cache entry found [url: http://ip:8080/UserManagement/img/loadSertificate.jpg, version: null]
    network: Connecting http://ip:8080/UserManagement/img/loadSertificate.jpg with proxy=DIRECT
    network: Connecting http://ip:8080/UserManagement/img/loadSertificate.jpg with cookie "JSESSIONID=8A0936441BDA3215A10D9798742C4685"
    network: CleanupThread used 39850 us
    network: ResponseCode for http://ip:8080/UserManagement/img/loadSertificate.jpg : 304
    network: Encoding for http://ip:8080/UserManagement/img/loadSertificate.jpg : null
    network: Disconnect connection to http://ip:8080/UserManagement/img/loadSertificate.jpg
    Loaded image: http://ip:8080/UserManagement/img/loadSertificate.jpgAny suggestions how to fix this issue?!
    Edited by: factor5 on Nov 12, 2009 1:27 AM
    Edited by: factor5 on Nov 12, 2009 1:28 AM

    xmm sry but this was a forgotten repaint() :
              public void paint(Graphics g) {
                   // call super's paint method
                   super.paint(g);
                   g.drawImage(getImage(getDocumentBase(), APPLET_BUTTON_IMAGE_URL),
                             0, 0, null);
                   repaint();
              }Now it seems to work fine.
    Edited by: factor5 on Nov 12, 2009 1:44 AM

  • Support message doesn't show automatically the details about created person

    Hi,
    I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
    Regards
    Vivek

    Hi Vivek,
    Check if BP is created for that user and you have mapped to satellie system (identification tab)
    e.g TRXN BP  create business partner for that user and in identification tab maintain
    ID type           identification number
    CRM001        <SID> <inst number> <CLNT> <User>           (satellite system details)
    Regards,
    Shyam.

Maybe you are looking for