JSF 2.0 Configuration file not validated in netbeans
When in netbeans I'm trying to validate config file shown below I'm getting the following error:
XML validation started.
Checking file:/D:/SPS/project/patient-service-gf3/web/WEB-INF/app-config.xml...
Referenced entity at "http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd".
schema_reference.4: Failed to read schema document 'http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd', because 1) could not find the document; 2) the document could not be read; 3) the root element of the document is not <xsd:schema>. [5]
cvc-elt.1: Cannot find the declaration of element 'faces-config'. [5]
Configuration file:
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
version="2.0">
It looks like related schema file is not available for using. Should I submit the issue?
If answer is "Yes" where to go to submit the issue?
I doubt the issue in area of responsibility of the netbeans team.
Thank you,
Vladimir
If there is no way to map a schema uri to a physical resource in netbeans, then I'm not sure what can be done.
We won't be posing the schema to the website until later in the spec development cycle.
Similar Messages
-
Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
AswiniHi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
</States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
<Columns>
<Column width="100" refname="System.WorkItemType" />
<Column width="400" refname="System.Title" />
<Column width="100" refname="System.State" />
<Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
<Column width="200" refname="System.IterationPath" />
<Column width="200" refname="System.Tags" />
</Columns>
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
<State type="Complete" value="Done" />
</States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Watch folder "render control file not valid"
I'm using cc 2014 on my main workstation and render nodes. I can't get the render engine to accept a job because I get the "render control file not valid" error when setting the watch folder. But, I can use the render engine on my main workstation and the job will start just fine. That leads me to believe its a permissions problem, but all of my network computers are set up to work as a 3d animation render farm and it all works pretty well with all computers being able to read and write to each other with full permissions.
Is there anything else I can look at that might help? Thanks in advance.> "Hello - is there any one left at Adobe to help with this? "
This is a user-to-user forum, where people help out in their free time. If you want a guaranteed response from Adobe personnel, contact Adobe Technical Support:
http://www.adobe.com/support/contact -
I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!
Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.
-
Configuration file not found jbo-33005
I am stumped, I have an application created in JDeveloper and using jakarta-struts. When I try to update the database, I get the following error: JboException: JBO-29000: unexpected exception caught: ...JBO-33005: Configuration ApplicationModuleLocal not found.
The JBO-33005 documentation says: This exception is thrown when the named Configuration is not found in the bc4j.xcfg file.
Action: Make sure the name of the configuration is correct.
I have doubled checked and the name is correct, the bc4j file is in the class path, etc.
Does anyone have any suggestions on how to correct this error?
Thank you in advance.Hi Keith, we're over here in my beloved OS9 forum, but actually you need to maybe post over here in 10.4.x/Tiger forums...
http://discussions.apple.com/forum.jspa?forumID=758
http://discussions.apple.com/post!default.jspa?forumID=758
Not that we couldn't probably answer it here, but to avoid confusion to others, I think it'd be to your benefit! -
Old fh7 files not valid Freehand documents
Does anyone know why some of my old FH7 files cannot open in either of versions 7, 9 or 11?
The error message tells me that they are not valid Freehand documents.
I already have at least a dozen of these, with potentially dozens more.
As i have no idea whats contained in these, I can't even re-create if necessary.Sorry Judy,
No luck I'm afraid. I've tried opening these old files in a trial
version of the new Illustrator
but to no avail. I think you're right when you say they may have been
saved to a bad disk at some stage.
I know our storage systems have changed a few times over the years since
these files were last accessed.
I will try seeing how far our backup tapes go back before finally giving
up I think.
thanks for your suggestions though.
alan
Alan Morris
Petrotech - Cartographer
Global IT & Technology - Petrotech
Phone: +44 (0) 118 925 5572
Helpdesk: +44 (0) 118 929 3883
E-mail: [email protected]
Petrotech
Visit our portal pages
Please conserve the environment by trying not to print this e-mail. -
Audio File Not Valid! on Zen Sleek Ph
Hello!
I've had a Zen SleekPhoto for a few days, and was initially delighted, until I realized that a significant part of my music collection will not transfer to the player.
I have many mp3 files which result in this message from Zen Sleek Photo Media Explorer when I try to send them to the player:
"Cannot Copy 'somefile.mp3': the audio file is not valid or not recognized. Do you want to skip this file?"
When I try to send the files using WinAmp, it just skips them without informing me.
What does this mean
!!! These are all mp3 files with ID3 tags filled in. They play just fine on WinAmp, iTunes, and Windows Media Player. I'm sorry to say that I cannot give encoding details about all of them, as I have neraly a decade worth of encoding different disks on different computers at different times represented here.
Is there some type of mp3 this player will not play? Most are 28K mp3s.
Firmware .0.0
Windows XP system.
If I cannot get this player to play half my collection of music, I will have to return it to the store, which is a shame, as it seemed so promising. I would be grateful for any help.
A friend who got a Zen Sleek Photo a few days ago is also having the same problem on a different computer, with a different music collection entirely.Message Edited by celticchrys on 05-25-2006 0:45 PMcheers for that,I didnt mean the clicking on the touch pad but the clicking coming from inside the player :smileytongue:I have found some other threads about it and it does seem to be normal...which is?good ...cheers for the replies
-
Package Configuration Files Not loading SSIS 2012
I've migrated an SSIS 2008 project to SSIS 2012 that uses xml configuration files. When I execute the first package through the IDE, the values in the config file are not populating variables as they did in SSIS 2008. I've enabled Package Configurations
and added the config files and not sure what I could be doing wrong. Could anyone offer any suggestions.
ThanksSomeone else migrated it for me before I had vs2012 installed. So I decided I would try migrating it myself. Now the config files are loading. When I migrated it there was an option for ignore config files that was checked. I unchecked it. Could that have
been the problem?
I just have one more issue now...Whenever I open the solution, it loads the config files, but two passwords are encrypted. For some reason it tries to login to the database when I load the package. This didn't occur in SSIS 2008. Do you know of any way to
disable this? I get about 2 failures before I'm locked out of the db.
Thanks -
ITunes Library File Not Valid! What the Heck?
I have 11,500 songs in my music library and am running iTunes 7.0.2. My iTunes Library file from time-to-time becomes corrupted, on probably at least a weekly basis. I have no idea what's causing this.
Here's the typical scenario ... iTunes works fine, I quit it, and the next time I open it it shows the dialogue box that says, "Importing 'iTunes Libray.xml'..." Then it organizes the files and a dialogue box indicates "iTunes Library" does not appear to be a valid iTunes Library file ... Renamed damaged file ..."
When it's finally all done, I get my music library back minus all my playlists as well as EQ and volume settings.
This happened today and my most recent backup (done earlier in the day) was also corrupted. This is why I've learned to keep a set of four recent backups just to insure I have a reliable and useable one not more than a couple of days old. But it seems a very unnecessary hassle and I'm always losing adjustments made to my database!
Anyway ... would anyone among our distinquished and experienced iTunes geeks out there have a clue as to why this is happening OR any suggestions as to what I might do to help alleviate the problem?
Is anyone aware of a program that will search for corrupted files within your music library? I suspect this might be part of the problem.
Thanking you in advance for your help!
PowerBook G4 17" | 80GB Video iPod Mac OS X (10.4.5)It seems like the ITL file is not being properly written after iTunes closes. Then when you re-open iTunes, it cannot load the ITL file and creates a new one. Forcing you to recreate your Library manually, again and again.
Several things to check:
-Double check to see that the ITL file or the folder it resides in is not read-only.
-Using Windows Explorer, right-click on the file (or folder) name, go to Properties.
-If it is, then close iTunes, change it, and reopen iTunes.
See this thread to reset the iTunes preferences: http://discussions.apple.com/message.jspa?messageID=1216090#1216090
And see this post to use TweakUI to check the location and validity of your My Music 'Special Folder': http://discussions.apple.com/click.jspa?searchID=487067&messageID=1197027
Once the main cause of the inability to save the ITL file is corrected, you'll need to recreate your Library one last time to finally save it. No way to resurrect the original one, unless you had backup copies of the ITL file. -
20D Raw files not valid in Bridge CS4?
Hey there,
I'd appreciate some help with this because I am going out of my mind trying to figure this out.
I am running Bridge/Photoshop Extended CS4 on Windows XP. I have updated to Raw 5.5. I manually replaced the "Camera Raw.8bi" (preserving old copy elswhere on my computer). Both programs were closed completely (including in the tray to close bridge) while updating and even restarted my computer. I have attempted to install the updater (it won't install) but I'm not sure if I need it.
Still, when I select "Get Photos from Camera" in Bridge and then select my 20D, I get the message "No valid files found".
What am I doing wrong?
Thank you!!
-Laura
"Insanity is doing the same thing over and over and expecting different results."
-Albert EisteinElaine,
In Bridge, go to the Tools menu and Purge the Cache for the offending folder(s).
DO NOT use the global Purge Cache command in Bridge Preferences.
Wo Tai Lao Le
我太老了 -
My printer software will not download. Part of troubleshooting directs me to download all drivers from the website. When I download for Windows Vista and then attempt to click on the file, it provides the following error: OJ8600_1315.exe is not a valid Win32 Application. I have Vista 32-bit and I chose Windows Vista to download the driver. Any suggestions?
Hi Christin
Please provide the following information so I can assist you better.
What is the full name and product number of your printer?
(8600, 8600 Plus, 8600 Premium)
How is the printer connected? (usb/ethernet/wireless)
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
IPhoto gives import error "file not valid" when import more than one photo
Trying to import lots of photos.
Every time I try to import more than a few, I get an error that "The following files could not be imported (they may be an unrecognized file type of the files may not contain valid data)."
When I go back to importing just one at a time, it works fine every time.
I have tried rebuilding the iPhoto library as well.
I have tried also not copying into the iPhoto library and copying into the iPhoto library (using Preferences/Advanced/Importing).
Any help would be great.
This is painful doing one-by-one, and each one I bring in shows as a separate event...
Every once in a while I will get lucky and it will import more than 5, though I will still get the error before it imports all selected. Ugh!Unfortunately did not work.
And now a silly question - how do I get to be able to see my original iPhoto library? When I try to open it, I don't see any of the albums and mobileme galleries I had created anymore (though I can still see them on the web) -
CONFIGURATION FILES NOT FOUND IN LANGUAGE PACK
Customer has configured a automatic system to monitor their OAM system.
They are getting ERROR in oblog like as below
"Could not read file" filename^D:\ORACLE\access/oblix/lang/da-dk/ldapconnmngrmsg.xml
"Could not read file" filename^D:\ORACLE\access/oblix/lang/da-dk/appdbmsg.xml
They would like to stop logging these kind of error message into their oblog.log files.
These files are not there in the da-dk language folder, so question is if copying these files from en-us language folder would resolve the situation or not.?
Also do you think in future releases of OAM will stop logging these ignorable ERROR messages getting logged into oblog.?
Any help in this regards would be much appreciated.
Regards
PrabashHi londonmet1,
Welcome to Adobe Forum!!
There is a planned maintenanace announced as per Adobe Customer care.
Please go through this:http://forums.adobe.com/message/6004766#6004766
You may visiti this page too :
http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
Hope it helps you.
Regards,
Rajshree -
Downloaded Zip files not valid??
I have just downloaded 8.1.6 documentation libraries and find that the zipped files are being reported as being bad or not a valid archive. Perhaps someone from Oracle might get around to providing feedback when they have finally sobered up after xmas.
Regds
Fergusgo to...
http://otn.oracle.com/documentation/oracle8i_arch_816.html
under heading ...
Oracle8i Release 8.1.6 Documentation Libraries
the link...
A83908_02 - Oracle8i Server Online Documentation CD-ROM Release 2 (8.1.6) for Microsoft Windows NT
regds
Fergus -
Render control file not valid for" project.aep -- Please Help!
I'm using AE CC
I've read all the discussions I could find on this topic to fix this problem.
All my computers are mapped correctly. The file that I'm sending at this point is very basic. Once jpg sequence (as a test) name shadowMatte - no spaces, underscores, very basic.
-The file is set for multimachine rendering in render queue
-I collected files with 'Collect Source Files: None' , Enable 'Watch Folder' render' checked
I'm not new to using multi machine rendering, this time around I just can't seem to get it to work...
all render slaves at least 8 gigs of ram.
Any help on this matter would be GREATly appreciated.
- Max> "Hello - is there any one left at Adobe to help with this? "
This is a user-to-user forum, where people help out in their free time. If you want a guaranteed response from Adobe personnel, contact Adobe Technical Support:
http://www.adobe.com/support/contact
Maybe you are looking for
-
List EM Users and their access to targets
Hi, We have a requirement to show who has access to Enterprise Manager and what can each person do. Seems simple enough. Still, lol, I cannot find a report or an example of how to do this. How do I list all of the administrators in Enterprise Manager
-
Can't add any attachments to our POP or IMAP messages
Grrrrrr ... !! I have this problem on 2 machines in my house so both me and my partner are stuck unable to attach files to our IMAP and POP accounts. When ever I click attach in any part of the GUI nothing happens. I can't drag and drop either. She t
-
Hibernate + GenericJDBCException + SQLException + 10g XE
Hi, I'm using Hibernate as OR mapper together with Java Spring framework and 10g XE. During 'normal' application usage the oracle database performs well, however during junit testing when the system is set up and torn down many times in a short time
-
Quicktime 7 OS status error -50 when opening a movie.
Have reinstalled quicktime 7, think there's some conflict. Have tried rereinstalling, updating, copying application from another computer. But quicktime 7 just won't play anything! Think there's a file corrupted somewhere.... not sure where to check.
-
I haven't really changed anything since I got this imac new in 2007. My friend had me install firefox - I don't remember it-how or what to upgrade to ? as i get a message to upgrade? What version does my OS handle? why is flash blocked on facebook? I