JSF 2 composite comp. backing class: what can I use for the decode method?

Hello, everybody!
I want to convert a JSF 1.2 custom component to a JSF 2.0 composite component. This JSF 1.2 custom component uses a renderer where I take some actions in the decode method. So, I would like to know what I could use to replace the well known decode method when writing a backing class for a JSF 2.0 composite component.
Thank you.
Marcos
Edited by: Marcos_AntonioPS on May 21, 2010 11:59 AM

Let's try with org.havi.ui.HStaticText

Similar Messages

What can I use for a low battery warning on a Mac Book OSX10.8?

What can I use for a low battery warning on a Mac Book OSX10.8?

What you should see above all your windows when your battery gets to low.

HT4623 what can be done for the ipad that is making people dizzy and having headaches?

what can be done for the ipad that is making people dizzy and having headaches?

Go to settings>general>accessibility>reduce motion> turn on.

Appleworks does not work with mountain Lion. What can I use for drawing and painting?

Appleworks does not work with mountain Lion. What can I use for drawing and painting?
MacBook
Marian

Please see this article which examines various possible alternatives to AppleWorks:
http://rfwilmut.net/aw

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

What can be used for replacing SELECT SINGLE *   ?

What can be used for replacing SELECT SINGLE * for improving the performance in the following statements?
SELECT SINGLE * FROM REGUV
   WHERE LAUFD = G_WLAUFD "RUN DATE ,SY-DATUM
     AND LAUFI = P_LAUFI. "IDENTICATION NO
SELECT SINGLE * FROM T100
   INTO CORRESPONDING FIELDS OF G_T100_WA
    WHERE SPRSL = G_T_IALLMESS-MSGSPRA
      AND ARBGB = G_T_IALLMESS-MSGID
      AND MSGNR = G_T_IALLMESS-MSGNR.
SELECT SINGLE * FROM TBTCO
   INTO CORRESPONDING FIELDS OF TBTCO
    WHERE JOBNAME = FS_JOBNAME.

If you need all the fields and you know that only one record exists then u need to use select single * only. You can improve the performance by specifying key fields in the where clause of select statements. If the structure of the work area or internal table in which you are fetching the data is same as that of the database table then no need to use corresponding fields clause.
Best Regards,
Vibha
*Please mark all the helpful answers

What font is used for the menu of Illustrator CS5?

What font is used for the menu of Illustrator CS5?
I know how to change the default font, which is used to input characters.
But, I do not know how to check the font used in the menu.
Is it the font that is described in the following files?
C:\Users\[UserName]\AppData\Roaming\Adobe\Adobe Illustrator CS5 Settings\ja_JP\AIPrefs
If you know, please tell me how to check the configuration file and how to change the font that is used in the menu.

If your using windows xp and applied the 12.02 update, then this is a known bug in
the update effecting xp users and adobe is working on a fix.
see this thread
http://forums.adobe.com/thread/762392?tstart=30
MTSTUNER

What font is used for the tool flyout labels.

What font is used for the tool flyout labels, mine are blank, however they work fine for the Menu items. Thank you, [email protected]

If your using windows xp and applied the 12.02 update, then this is a known bug in
the update effecting xp users and adobe is working on a fix.
see this thread
http://forums.adobe.com/thread/762392?tstart=30
MTSTUNER

The AIR can be used for the EXE/Direct3D based game?

--English
Hello there.
I'm a game programmer.
I saw that the AIR is being used for LOL(legend of leaders).
I don't know is the AIR used for just game launcher? or in-game UserInterfacce?
Some of games are implement user-interface by the SWF(flash output) with the Scaleform.
Scaleform is C++ library which rendering SWF using Direct3D on the game screen(also include fullscreen) and notify event that interaction with the user input through the C++ level event.
It provides with .h, .lib, .dlls
The AIR can that above things?
The AIR can be used for the exe based 3D game?
--Korean
AIR 를 이용해서 스케일폼처럼 게임 내부의 UI를 구현할 수 있는지 궁금합니다.

Hi,
If the report in question is same as the post on which I replied a few minutes ago, then you can try this:
1) Create a parameter in the Main report. Go to Field Explorer and create a new Parameter.
Set the List of Values option to 'Dynamic' and choose the Region Field from under 'Value'
2) I'm assuming the Crosstabs are placed in the Sub-report. So, right-click the subreport and select 'Change Subreport Links' > Move the Main report parameter to the 'Fields to Link to' area and from the drop-down for 'Select data in subreport based on field' choose the Region Field.
This will automatically add the Main report parameter to the selection formula of the sub-report.
Hope this helps!
-Abhilash

What technology that can be used for the creation of Need Definition?

Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.

You can use conditional styles to address specific browser issues (this is more than likely the markup you noticed).
Here's a good guide:
http://www.quirksmode.org/css/condcom.html

What can be used in the place of iWeb?

I am new to the Mac world. I am just finding out that iweb is no longer avaliable as part of ilife. what can be used in it's place?

iWeb still is available as part of iLife. However, MobileMe and its attendant server service, iDisk, are no longer available (for new subscribers - both will expire for current subscribers in June 2012).
You can still buy and use iWeb, but cannot publish your created site to iDisk. You can publish to any of the many web hosting sites available (HostGator, GoDaddy, etc., etc.).
But even though you can still buy iWeb as part of iLife, Apple hasn't upgraded it for several years. So you're better off using other web creation software. There's several around. I happen to use Sandvox and like it.

Interface/class which can be used for obtaining exchange rates of currency

Is there any interface or class in the java package which can be used for obtaining current exchange rates of currencies ?

Yes. The people at Sun change the static fields every day to reflect the current prices on the world currency markets at GMT 12:00. Then every day all the java programmers around the world reinstall a new JDK that contains the updated class. The class is called:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble
To access the Euro-Dollar exchange rate, you write:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble.EURODOLLAR

When adding my icloud account to ical, what do i use for the account URL?

My wife and I have iphones that we have registered under one email address/account...i recently upgraded our phones to IOS5 and want to use the cloud so we can coordinate our calendars using the iCloud. I am trying to add our iCloud "account" to our iCal on our Mac and don't know what to use for the "Account URL". Any help?

Hey rid23466,
Thanks for using Apple Support Communities.
If you forgot the password to your Apple ID, you can follow this article to recover it.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Have a nice day,
Mario

What data is used for the link title in osssearchresults.aspx

In our OOTB SharePoint installation we have a search results page in a collaboration site that displays Word documents. Each word document has a Title property, however the text used for the hyperlink to the document in the search results page does not seem
to use the Title property, instead it uses some text from inside the document, e.g. the contents of the first H1 tag.
I had a look at the XSL of osssearchresult.aspx core results web part, and this uses a "title" parameter. So I can only assume that when SharePoint search catalogues a Word document, it decides to ignore the title property of the list item
and instead derives the title text from content within the document itself.
Is that correct? Or am I missing something? Can I change the title for Word documents in search to be the actual title of the list item?

Hi,
The word documents have two columns “Name” and “Title” by default. The “Name” column is the file name and is “file” column type, its related Crawled Property is ows_LinkFilename
. The “Title” column is the document title and is “Single line of text” column type, its related Crawled Property is ows_Title . When SharePoint Search crawls the word document, both the two columns are crawled. However, the ows_Title
crawled property is mapping to “Title” managed property, but the ows_LinkFilename crawled property does not map to any managed property. In the SharePoint search results, the word document shows its “Title” managed property.
So for your scenario, the search result should show the “Title” column value. Please go to your document library and verify the “Title” column’s value of your word documents.
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/4e1749cd-cf4d-46d6-98e2-3f42366e376e/how-does-the-search-result-are-displayed?forum=sharepointadminprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I was getting and iTunes gift cards and I want to ask that can the iTunes gift card can be use for the app store.

I was getting an iTunes gift card and I just want to ask that can the iTunes gift card be use for the app store.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102630)

JSF 2 composite comp. backing class: what can I use for the decode method?

Similar Messages

Maybe you are looking for