JSF h:selectOneMenu weird stuff

Hello, I'm a newbie.
I have a working ComboBox (selectOneMenu) in one panelGroup the contents of which are populated in .java file from a DB. (the code is not mine, it's a big project). The panelGroups are opened one at a time depending which menu is selected. I want the same combobox in the other panelGroup, so I copy the code
<h:selectOneMenu valueChangeListener="#{administration_analysis_report_user.changeAnalysisReport}" binding="#{administration_analysis_report_user.analysisReport}" onchange="submit();">
    <f:selectItems value="#{administration_analysis_report_user.analysisReportList}" />
</h:selectOneMenu>to other panelGroup, but it does not appear (does not generate any code).
Which can be the problem (i tried putting IDs, removing these bindings/actionListeners, but nothing helped). But as I rename selectOneMenu into selectManyListbox, the list appears.
Thanks for guidelines!
sledge

Thanks for a quick reply!
The problem is that I don't get the cloned (copy->pasted) comboBox (selectOneMenu) after I copy/paste the code. If i rewrite it into listbox, everything works fine even without altering .java code, which is not even the case here.
in an associated java file everyting is as you'd described:
private HtmlSelectOneMenu analysisReport; // + getter + setter
the only weird thing is that I cannot have this selectOneMenu working in another panelGroup. The weird thing to tell of all this is as if the original comboBox is somehow bound to the panelGroup it is in, and any copy/pastes to elsewhere stop it from working. But I cannot trace that bound anyhow.
Once again -- there's nothing to do with object type mismatches.
                                        <h:panelGroup id="analysis_report_contents">
                                                <h:form id="form">
                                                        <h:panelGrid styleClass="spaceAbove" columns="1">
                                                                <t:panelGroup>
                                                                        <h:outputText value="#{m['administration_analysis_report_user_report']}: " />
<!-- this generates no code -->
                                                                        <h:selectOneMenu valueChangeListener="#{administration_analysis_report_user.changeAnalysisReport}" binding="#{administration_analysis_report_user.analysisReport}" onchange="submit();">
                                                                                <f:selectItems value="#{administration_analysis_report_user.analysisReportList}" />
                                                                        </h:selectOneMenu>
<!-- this works fine even without changing the object types in .java file; but I need a combobox, not listbox -->
                                                                        <h:selectMultipleListBox valueChangeListener="#{administration_analysis_report_user.changeAnalysisReport}" binding="#{administration_analysis_report_user.analysisReport}" onchange="submit();">                                                                </t:panelGroup>
                                                                                 <f:selectItems value="#{administration_analysis_report_user.analysisReportList}" />
                                                                        </h:selectMultipleListBox>
                                                       </h:panelGrid>
<!-- ... -->
                                        </h:form>
                                        </h:panelGroup>
<!-- here it works fine, I copy paste the selectOneMenu to the above panelGroup from here: -->
                                        <h:panelGroup id="analysis_report_security">
                                                <h:outputText styleClass="summaryHeader" value="#{m['administration_analysis_report_user_header']}" />
                                                <h:form>
                                                        <h:panelGrid styleClass="spaceAbove" columns="1">
                                                                <t:panelGroup>
                                                                        <h:outputText value="#{m['administration_analysis_report_user_report']}: " />
                                                                        <h:selectOneMenu valueChangeListener="#{administration_analysis_report_user.changeAnalysisReport}" binding="#{administration_analysis_report_user.analysisReport}" onchange="submit();">
                                                                                <f:selectItems value="#{administration_analysis_report_user.analysisReportList}" />
                                                                        </h:selectOneMenu>
                                                                </t:panelGroup>
                                                        </h:panelGrid>
<!-- ... -->

Similar Messages

  • Is feedburner adding weird stuff to my podcast?

    Hi there. Episode 1 of my podcast was fine....but after uploading episode 2 (september) itunes is displaying some weird stuff and will not download it. I thought the xml was fine...but when I view the xml in feedburner it has done something weird. In description it has added some image source.....if anyone has a moment can they have a look? I am really lost =( thanks
    http://feeds.feedburner.com/TheBalancePodcast
    I can upload xml files or whatever is needed.....very confused

    http://feeds.feedburner.com/TheBalancePodcast   is my feedburner feed
    www.drawingaway.com/podcast/xml  is my main xml feed
    http://itunes.apple.com/ca/podcast/the-balance-podcast/id464589031 is the itunes feed
    one thing that feedburners has done (among many things) is added some stuff int he 'description' field of both episodes. it doesnt show in itunes but when i play the episode it shows on my iphone and ipad and whatever else...it should just read "September 2011" but it reads "September 2011&lt;img src="http://feeds.feedburner.com/~r/TheBalancePodcast/~4/28JhzYMq7uw" height="1" width="1"/&gt;"
    it is where the video - description would be

  • My iMac started doing weird stuff

    My mac started doing weird stuff. Not sure how to explain, have video but that option is grayed out for me. It's making repeated dings like input error, there is a gray box that runs thru my applications and other windows. if I click in the top tool bar it opens and then chases thru all the dropdown menus. Weird. Can anyone assist? HELP!

    Hello jtoddarmstrong,
    It sounds like you might have VoiceOver enabled on your Mac.  You can disable it using these steps:
    Turning VoiceOver on and off
    You can turn VoiceOver on and off at any time; you don’t have to restart your computer or log in again.
    Here are ways to turn VoiceOver on or off:
    Press Command-F5. If VoiceOver is on, pressing Command-F5 turns it off.
    Use the Universal Access pane of System Preferences.
    You can find the full article here:
    Chapter 2. Learning VoiceOver Basics
    http://www.apple.com/voiceover/info/guide/_1124.html
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Some weird stuff going on after I deleted var/folders

    I saw my var/folders was taking up around 7GB and my poor 55 GB MacBook Air was suffering because of it, so I decided to delete. Some weird stuff going on now. Icons for apps are acting up. I restarted my computer after that. Before I deleted I put it on my 500GB external hard drive. Any tips? Should I have done this? Any negative repurcussions because I did that?
    Any help is appretiated, and thank you!

    I fixed it on my own if you wish to know a detailed story of how I did it, comment. Also, know that I don't come here too often but I'll recieve an E-mail so I guess I'll answer anything

  • Exports differing from timeline/weird stuff

    Hi everyone.
    A couple of weird little problems going on here that I thought you may have bumped into. We're running FCP 7, AJA Kona LHi cards for I/O, snow leopard.
    It is an education institution technically so the machines do get a fair bit of use, but I've checked all usual sequence settings, trash prefs etc..
    We're running into multiple problems: clips suddenly having time-code generator filters applied to them out of nowhere (not all clips in timeline), crossfades applied to almost all clips on the timeline (this couldn't be a user error selecting all and hitting command + T since some don't have fades even though there are handles) and most annoyingly, exports differing from the timeline. For instance, I applied a blur to a duplicate of a clip, matted it out to only affect a certain area of the clip. On export, there is a quick grey flash and then the brightness of the whole image drops for one frame. Doesn't do it in the timeline.
    We're also experiencing tiny little zooms at the beginning and end of frames on some exports. We think we might have this one solved as it's only happening on footage shot on the Panasonic AG-AF101 which was transferred straight into ProRes without going natively to AVC first, which has resulted in some strange interlacing problems compared with 5D footage in the same timeline, also transcoded to the same ProRes settings. We rendered everything to ProRes LT then exported and this seems to have got rid of it.
    ANYWAY, sorry for such a long post but I just wondered if anyone has seen stuff like this, bearing in mind that we're always working with the correct sequence settings with decent editing codecs (usuallly prores), and if anyone has any tips..
    Cheers!
    Kit

    This is months later, I know, but I'm wondering if people are still having problems with this.
    I'm shooting on the ag af-101 and transfering the folder in it's entirety to a hard drive, then logging and transfering into final cut 7. Pro res 422.
    What I'm getting is, I think, what a previous contributor mentioned - a strange strobing or what I would call a juddering on some footage.
    It seems to be on pans and reveals but also on movement of characters within a motionless frame.
    It's possible it has something to do with the camera but it seems more likely to be a final cut issue.
    Any thoughts?

  • Windows does weird stuff under Boot Camp

    I know this sounds like a Boot Camp question, but I'm pretty sure I'm better off here. Allow me to explain:
    I use Mac and Windows equally on my MacBook Pro, but on occasion, I will load up Windows through Boot Camp and everything will start going crazy. By that, I mean that when Task Manager is brought up, almost all the background programs are running (even ones which don't normally run). In addition, the System background item is running around 30-50% of the memory. All of these things together causes my system to bog at 100% usage.
    I assume this is Windows conflicting with hardware in some way, because this isn't a typical problem with Windows XP (not that I know of anyway). Here are a few additional facts I recently realized which might help to solve this problem:
    1. When this happens, I try to shut off the computer to no avail. Explorer hangs up, then tries to shut down, then says it can't be shut down. After hitting the "End Now" button, the computer hangs on an empty screen (meaning you can see my background, you can see my cursor, but I can't access anything...Task Manager included).
    2. The last time this happened was right after I disconnected my USB ported external hard drive.
    3. I am running NTFS-3g with MACFuse (or whatever it is that allows you to write to the Windows drive on the Mac side) as well as rEFIt (the boot system which allows for triple+ OS booting through Boot Camp)
    Usually when this weird phenomenon happens, I have to boot up the Mac side of my computer (which complains that the Windows partition is "still running" and can't mount it) and then boot back into the Windows side (this is a sketchy solution at best).
    I'll pose this question on the Boot Camp support board as well in case it's inappropriate here. Please help! This isn't exactly crippling my system (no damage has been done as far as I can tell) but it's really #%@&#@$!% annoying!

    I believe NTFS-3g is how the Mac drive recognizes the NTFS format (it's just a more specific name). I could be wrong on this, but I recently formatted my hard drive and had to re-setup Boot Camp. Before I installed MACFuse, I believe it was recognizing my partition as NTFS-3g
    At first glance, I would agree with you on the rEFIt and MACFuse prognosis. However, when I resetup Boot Camp, I did not use rEFIt initially and still had the problem. It might be MACFuse, exept MACFuse should only be affecting how the Mac side mounts the Windows partition.
    MacDrive doesn't help me here. I don't care about seeing my Mac partition on the Windows side of things.
    I have a 60 GB partition, so that makes me almost 99% certain I am not running a FAT32 partition. There may be ways to run a hard drive/partition in FAT32 while exceeding the typical 32 GB standard, but I'm not aware of any.

  • Mac Pro doing weird stuff at boot !!!

    Hi
    I bought my mac pro just 3 months back.
    now its not booting up...
    i started facing this problem maybe 2 months back.
    basically i used it for a month with no issues and then suddenly one fine day it decided to not boot up.
    i tried everything from all the resets to disconnecting everything except the monitor n keyboard n mouse,
    but still nothing. there were 2 red lights on inside. one at the top on the vertical board and one on the lower board.
    then after 15 mins of trying it started up.
    so i sent it to apple service center as i have apple care.
    they checked n said that it was the way my ram was put in (funny part here is that the mac pro itself told me to put the ram in that order when i first put it in)
    so i got it back n it started working fine for a few days.
    then again like last time it didnt boot up.
    same red lights and no boot for sometime n then boot...
    then a new thing started up....the fans started running at really high speeds.
    they go on n off....speed up slow down....erratically...
    but mac boots fine n works fine.
    i did a apple hardware test n got a 4sns error....i checked online for it and didnt really find the exact error definition anywhere, but got to know that basically a 4sns error is a sensor error.
    so i sent it back to service center.
    this time i made them boot it infront of me...and it booted up perfectly...
    so i left it with them to test it properly...
    they called me 2 days later n said that there's nothing wrong with the machine n that they didnt even get the 4sns error....
    they also told me that it must be a wiring issue in my house...earthing stuff..
    i got it back again n tried to boot it but exactly the same thing like last time.
    no boot at the beg, then boot with fans behaving erratically...
    so i decided to buy a new ups and also check the machine at all the other points in my house....same thing again...
    now i dont think its possible that every electrical point in my house is wired wrong...
    so i spoke to the tech guy at the service center n he told me to take out the extra 4gb ram that i had added 3 months back when i bought the mac.
    i did that but same thing...fans speeding up n down...
    so i spoke to him again....well now he's sending a tech to my house to see what is really happening...
    im depressed....n im seriously dissappointed with apple..
    mac pro's are not supposed to do this...
    so much of my work is suffering...
    please help n advise...!!!

    I saw poeple with undersized UPS have trouble so the VA rating.
    Some outlets are still part of a larger circuit, and you don't want a windows A/C or fridge also pulling. And of course home wiring, grounding, etc.
    Your UPS if APC, Cyberpower or good name will tell you if there is a ground fault.
    Did you ever test wtih just the new RAM in the proper DIMM slots?
    Wait for a tech. I'm glad I could get an electrician to wire some outlets. And I much prefer building my own PCs and doing my own servicing.
    The SMC RESET method keeps changing, but unplugging everything, all cables, then I would hit power button for 10 seconds. Wait. a minute, then reconnect the power, kb/mouse and video cable and power up. On a PC removing the CMOS battery (PRAM battery) for 15 minutes too.
    I worry that travel and carrying that something can loosen up, even RAM DIMMs or battery or something.
    "RAM was put in funny" though sounds suspecious. You did it by the booklet (by the book) and according to the RAM Utility guide instructions.
    Apple has a service diagnostic and maybe it is the cpu daughter card.
    You only need one DIMM to boot. Might go through some trial and error of one DIMM in one of the slots.
    Please list what you can - something like:
    Mid 201 Mac Pro 5,1 2.8GHz 3 x 1GB 4-core ATI 5770 etc

  • Outline text problems doing weird stuff to letters.

    Motion 2.1.2
    what would cause this on random text letters.
    it has an outline on it and as soon as I take it off it goes away.
    I have tried... repaired permissions, trashed prefs, changed fonts, switched from font Xplorer to font book, cleared font cache, did a little dance and its still not working.
    file works fine on our 10.4.11 non intel machine but wont work on either of our 8 core 10.5.5 machines...

    tried that and that didnt work either...
    we noticed it because the motion files we take into final cut.
    we saw the weird box and took it back into motion.
    we then tried to recreate our steps without taking it into final cut and still it does the same thing.
    I am just not sure what the deal is...

  • Weird stuff going on with my iPhone 4: losing settings, "set up your phone"

    I've had the iPhone since the 3G unit including the 3GS. I've had my iPhone 4 since 6/24 and all of a sudden in the last couple of days, I've been experiencing some weirdness I have never seen before in my iPhones.
    A couple of days ago, I noticed that the battery percent meter was simply turned off. I did NOT turn it off. It was just simply off now.
    Today, I synced my iPhone to iTunes 9.2 at home and the sync went fine. I realized right after the sync that I had purchased some music and didn't "Transfer purchases" (don't ya just hate remembering you forgot to do something just AFTER you unplug your iPhone! ).
    Anyway, I unplugged and plugged it back in. iTunes now showed a "Set Up Your Phone" screen and offered to restore a backup. Huh?! The weird thing is that the name of my iPhone 4 showed up correct in the device list AND iTunes was wanting to restore a backup of the same name.
    sigh
    I rebooted my Windows 7 64-bit PC and tried it all again. Same results. I then thought, I wonder if rebooting the iPhone 4 will fix the issue. I tried that. Same results.
    sigh
    Okay, I guess I'll let it restore the backup. I just went through that (takes about 7 minutes) and things are great now.
    Is that weird or what?! Never seen anything like that before. Is my iPhone 4 going bad?
    Weird. Weird. Weird.

    Check: Settings - General - Accessibility - LED Flash for Alerts = Off

  • Pitiful performance with b43 BCM4318, very weird stuff

    Well, I'm at a huge loss here. My networking performance is very bad. But not completly broken. Some sites will load, but most fail randomly. Pacman gives a "no address record" or "not found" error very often, making it nigh impossible to install packages.
    Now, the main stuff. I'm using the standard "network" daemon. During init, it claims that network failed, but upon iwconfig, I can see that wlan0 did get assigned a ESSID, along with an IP address. I'm using the b43 driver, using instructions from http://linuxwireless.org/en/users/Drivers/b43.
    Here's the output of ifconfig...
    wlan0 Link encap:Ethernet HWaddr 00:1A:70:36:8F:53
    inet addr:192.168.11.11 Bcast:192.168.11.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:45 errors:0 dropped:0 overruns:0 frame:0
    TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:5736 (5.6 Kb) TX bytes:5799 (5.6 Kb)
    Here's iwconfig...
    wlan0 IEEE 802.11bg ESSID:"0016010FC1D0"
    Mode:Managed Frequency:2.462 GHz Access Point: 00:16:01:0F:C1:D1
    Bit Rate=24 Mb/s Tx-Power=20 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=49/70 Signal level=-61 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    iwlist wlan0 scan...
    wlan0 Scan completed :
    Cell 01 - Address: 00:16:01:0F:C1:D1
    Channel:11
    Frequency:2.462 GHz (Channel 11)
    Quality=60/70 Signal level=-50 dBm
    Encryption key:off
    ESSID:"0016010FC1D0"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
    36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=00000005aeeb1a8e
    Extra: Last beacon: 66ms ago
    IE: Unknown: 000C303031363031304643314430
    IE: Unknown: 010482848B96
    IE: Unknown: 03010B
    IE: Unknown: 2A0104
    IE: Unknown: 2F0104
    IE: Unknown: 32080C1218243048606C
    IE: Unknown: DD060010180202F1
    Here's /etc/rc.conf, or most of it, I left out localzation...
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!snd_pcsp !pcspkr loop !b43legacy b43)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="gabes-computer"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(eth0 wlan0)
    eth0="dhcp"
    wlan0="dhcp"
    wlan_wlan0="wlan0 essid "0016010FC1D0""
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 10.42.43.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng @dbus @hal network @netfs @crond @alsa @sshd gdm)
    I'd really rather not use NetworkManager, as I've had some really bad times with it in Ubuntu. Suffice it to say, I hate I NM with a passion!
    Speaking of Ubuntu, I'm currently dual-booting with it, and this very same card with this very same driver works flawlessly... I should also add that I got those outputs from a nice and steady SSH connection to it, so I have no idea!
    So, thanks for your time, for your support to Arch, and just give a shout if you need more info.
    Last edited by Super_ness (2010-10-22 02:13:57)

    That's strange.  I'm having similar issues with a Broadcom wireless card, but it appears to happen accross regardless of OS.  I attribute it to bad drivers.
    I think the reason why you get a fail message on your network is because you have the following setting in your rc.conf:
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(eth0 wlan0)
    eth0="dhcp"
    wlan0="dhcp"
    wlan_wlan0="wlan0 essid "0016010FC1D0""
    If I understand this correctly, you are telling the system to bring up both the wireless and ethernet cards.  If your computer is not plugged into the ethernet, that will fail every time.  You may also notice a delay every time the system boots while it tries to get an address from the ethernet card.

  • Some weird stuff is showing up on my iPod...

    Whenever my backlight is on there is a small blob of different color pixels or something on the screen. They stay there even when I change menus and they disappear when the backlight is off. It's just really annoying and I have no clue how to get rid of them. I know of a thing called dead pixels on stuff like hand held game systems and I was wondering if maybe this is similar?

    Your iPod's screen may have been damaged in some way, causing the pixels to look strange.
    But first, try resetting your iPod:
    Press and hold the Menu and Select buttons together for about 5-10 seconds.
    Try this several times. Also, connect your iPod to a power source while you're doing this, too.
    Then, try restoring your iPod. This deletes all the content off of your iPod, but it's possible that it could resolve your iPod's issue.
    For details, see this:
    Restoring iPod to factory settings
    -Kylene

  • Msi 7970 lightning BE artifacts & weird stuff

    Hi,
    I'm having a lot of trouble with my msi 7970 lightning. Since a few months ago it started showing weird artifacts. I've mede a few video but ''I'm not allowed to post external links'', or at least so say the board.
    The card it's stock speed (core and memory), the fans profile it's also at stock. I'm using the last Omega 14.12 driver and I've tried all the amd drivers from the last year. My cpu is an i7 3770 and my pc has 8 gb of ram.
    The card serial number is:
    S/N: 602-V278-040B1306042942
    Now cames the pain. I had to stop playing Diablo 3 bacause some weird artifacts, then I quit playing Guild Wars 2 for the same reason (see the first video) and now I had to stop playing Dragon Age Origin because of the artifacts, which comes out at high to ultra setting (manageable by the card), and because the game keep crashing randomly to desktop (directX Error) or even freezing (Application Hang, ID 1001 Error). I have seen also weird artifacts on Watch Dogs and Battlefield 3 but fortunately I didn't like those game so much...
    What should I do? I have even tried a clean win 8.1 installation...I'm really discouraged.
    This card has still six more month of warranty, should I return to the shop?
    Thanks in advance,
    roz

    UPDATE:
    B2 error solved. I tried the second bios on my msi z77 mpower motherboard and it wasn't update to the last release, so it was incompatible with amd 7970 card. Now I've update it the video card regularly boot.
    Reading online i found that a possible explanation of the artifacts on 7970 cards is due to Hynix GDDR5 video memory ( H5GQ2H24MFR-R0C) voltages which are pushed too by manufacturers. So some people solved the issue reducing the memory voltages (see youtube) and clock speed.
    Msi kept them under hynix scpecification, that's to say 6000 Mhz at 1.6 mV, maybe could be a defective module. I mean this card was build for overcloking so it seems weird to see these artifacts when the card is in full load and reaches 75-80 °C. In fact I've no issue, at least for now, with Crysis 3 at high details because the card never hit 70 °C.

  • MOVED: msi 7970 lightning BE artifacts & weird stuff

    This topic has been moved to Graphics Cards.
    https://forum-en.msi.com/index.php?topic=254585.0

    UPDATE:
    B2 error solved. I tried the second bios on my msi z77 mpower motherboard and it wasn't update to the last release, so it was incompatible with amd 7970 card. Now I've update it the video card regularly boot.
    Reading online i found that a possible explanation of the artifacts on 7970 cards is due to Hynix GDDR5 video memory ( H5GQ2H24MFR-R0C) voltages which are pushed too by manufacturers. So some people solved the issue reducing the memory voltages (see youtube) and clock speed.
    Msi kept them under hynix scpecification, that's to say 6000 Mhz at 1.6 mV, maybe could be a defective module. I mean this card was build for overcloking so it seems weird to see these artifacts when the card is in full load and reaches 75-80 °C. In fact I've no issue, at least for now, with Crysis 3 at high details because the card never hit 70 °C.

  • How can I get rid of weird stuff going on? Please help!

    Please some one help. Or re-direct me to a web site that can help.
    I installed 10.5.1 on my G4 Powerbook 1.67 Mhz from OS 10.3.9
    The first thing that went wrong was that the Sound application got grayed out after the restart. The mute button in the Preferences was clicked but grayed out. So I installed again like before. So it worked.
    So next I put one of my folders I kept always on the Desktop, where I had saved over the years pictures and things of interest, to have a fast access. I put this folder in to the Dock and tested it and the folder expanded and showed all the files in stack mode or grid. That is the last time I saw the Folder working in the Dock. Next the Icon showed a ? (question mark) that meant the original could not be accessed. Well even though I new the Folder name for sure and searched it, it just had disappeared.
    So next I went to Starbucks since I don't have DSL and Downloaded the upgrade to 10.5.2 than I went home. And just for the **** of it checked for new upgrades on my Dial-Up connection to find 4 new upgrades.(Safari 3.1, Leopard Graphic, Time Machine and Airport and Security 2008_002) Since it takes hours to download with my dial up connection I just choose to Download the Time Machine and Airport Update of 10.2 MB. It downloaded and up came the window that the new software needs a restart. So I clicked restart up comes a window that says "Installing 1 item". I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation. The cloud burst in purple??/
    In the "Install 1 item" window the status bar started moving for about 1 inch saying "Configuring Installation" and than stopped. And that was it. I waited for about 45 minutes and since nothing happened and I had no options I had to hold the start button down to shut down. Now after a deal like this I run always Utilities to repair the Permissions. That program is totally out of whack. It stops shortly after you click Repair Permissions and says something like "Repairing Permission Estimated time less than a minute". Well it takes about 10 minutes, than the status bar moves a bit and it says "Estimated time 39 minutes and than immediately counts down (like seconds) to 0 and says that the permissions are repaired. I also see and old blank disk entry that I had ejected earlier that still shows up in the left pane of the Utilities window.When I click on it the Utilities window moves from the First Aid tab to the next tab thats called Erase and ask me if I want to erase the DVD. But there is NO DVD in my drive.Now after Disk Utilitie repaired the Permission the following text appears in the window.
    ACL found but not expected on "Applications/Utilities"
    ACL found but not expected on "Application"
    ACL found but not expected on "Library"
    Sometimes there are a few more lines of text like this but this is just showing while I type this.
    So do you have any idea? what's going on. Otherwise everything seems to work alright like CS 2, Mail, Safari, Word and all my other programs. I also had weeded out as good as I could the old left over files and apps from OS 9 (classic)
    Any help would surely be great. Sincerely Volker and thanks for reading this long request.

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • I sync my iPad. Now everything is messed up playlists and music are gone. Weird stuff showed up. And now I can't find the option to delete or make new playlists. 6.1.2 is my newest version!! NEED HELP!!

    So I don't sync my iPad very often. My dad and I share a computer. And I decided to do it the other day. I am pretty sure I did it all correctly selecting music that I wanted not deleting playlists but it seems to be that they are gone. And music I didn't want has appeared. And now I don't have an option (with this new iOS 6.1.2) to make new playlists or edit music I don't want out.
    I know I need help figuring those two things out 1 how to make a play list. There isn't a "add" button anymore in that screen I have a "you have no playlist"with a button underneath that says "go to iTunes Store" why I would need the store for that, I do not know.
    Then in the songs, artists, albums sections where you used to be able to hit "edit" button to delete the music you have that you don't want. I don't seem to be able to do anything at all to get rid of the random music I have.
    I need help. I know my iPad fairly well but I am not super savvy with it either.

    Is there a "New" button at the top right of the Playlists section of Music?
    There is no Edit button to delete music, swipe sideways on the song to reveal the delete button. Tap and hold on the artwork in Artists and albums to reveal the (X) button to delete. Or connect the iPad back up to iTunes on the computer and check your sync settings for music to ensure you are syncing the right content.

Maybe you are looking for

  • Photoshop Elements 8 for Mac Question about Opening Files

    Hi. I somehow must have changed some settings in Photoshop Elements and I don't know how to change them back. Whenever I open an image, it opens at a size of 34.5% and the window is sized accordingly. When I change the view to Actual Pixels, the imag

  • Disappointing lack of support for Unicode

    I was very disappointed to find that Pages 2 still cannot properly support Unicode. TextEdit does a vastly better job of supporting Unicode. I can paste Unicode text into Pages 2 that I have already edited in TextEdit, but it cannot be properly typed

  • Can I use canon eos40d for stop motion capture in premiere elements 9?

    I Want too do stop motion capture but when I click get media, the pop up dialog box proceeda as if to import still photos. How do I get the "capture panel" that is talked about where I can select stop motion?  Is premiere elements 9 supposed to work

  • HT4623 How to do I update my iPhone 4?

    I have been trying to update my iPhone 4 about everyway possible, but it's just not working. I've tried with the computer, which will load for about and hour or two then stop , and buy just going to Setting> General but I have no "Software Update" bu

  • How to get apps for ipod touch 3g

    I have ipod touch 3g. Recently i  have restored it without backing up. Other words, i lost all apps that i had. So, now i cannot install any apps because all of them have the newest IOS. Where can i find apps with old IOS for ipod 3g? Thank you.