JSF-RI. Is it possible to have ID for for elements?

It is more convenient to address to the form element with 'id' attribute rather than 'name' attribute (just because jsf-ri use very unexpected naming convention). However, jsf-ri renderer removes 'id' from the final code (just uses it to contruct 'name' attribute).
Probably, it it will be not a critical solution for final release of jsf-ri to leave 'id' as is along with 'name'.

JSF should definitely not prohibit the setting of
"id"-attribute for the generated HTML table.
I strongly hope that such a severe constraint is
removed in the FCS.
Can somebody comment on the issue?
Thanks,
erikAny code that assumes the "id" property of a UIComponent will be the generated "id" in the markup created by a renderer is pretty much guaranteed to fail -- renderers are explicitly not required to use such identifies in the markup they create. Instead, if you need to know what identifier the renderer is giong to create, call getClientId() on the component instead. This is the value you should use, for example, in JavaScript created by your renderer that refers to the component in question.
Craig McClanahan

Similar Messages

Is the possible to have Business Area for CVD Clearing Account

Hi Friends,
Is the possible to have Business Area for CVD Clearing GL Account?
If yes, then how can it be done/configured.
Pls advice.

.

Is it possible to have Business Area for CVD Clearing Account

Hi Friends,
Is it possible to have Business Area for CVD Clearing GL Account?
If yes, then how can it be done/configured.
Pls advice.

.

Is it possible to have a form for 2 individuals to complete before submitting?

Is it possible to have a form for 2 individuals to complete before submitting? The first person will fill out a portion of the form and the second person will fill out the rest of the form and submit.

You can create a submission-enabled PDF first. Ask the first person to fill out his or her portion of the PDF form and save the file. Send the saved file to the second person and have him or her to fill out the rest of the PDF form and submit.
To create submission-enabled PDF
1. Click on the Distribute Tab
2. Click on the "Save Sumbission-Enabled" PDF button.

Is it possible to have release strategy for sales order?

Is it possible to have release strategy for sales order?

hi
as per SAP standard there can not be any release strategy for sales order but if u want to control u can use authorization profile for this purpose.
povide authoriztion to the required persons only..
regards
CMM

Is it possible to have different headers for each page for the Pages app?

I just purchased the Pages app for my ipad and it happens to be one of the best apps i've ever bought. However, I'm having trouble figuring out how to have different headers for each page of the same document. Is this possible to do?

Tommy,
One of the limitations of Pages for iOS on your iPad is that Pages can't create sections per se. The best you can do is insert page breaks and then assign different columns to that page. The problem comes with the headers and footers - in iOS Pages, the headers and footers apply to the whole document, not the individual sections as you would find in Pages '09 on OSX.
The workaround is to create your document on OSX, insert the needed sections and headers, save, then transfer the Pages document to your iPad either as a working "blank" or as a new document. The headers and footers will reflect the sections you created in OS X, but you won't be able to add any new ones or new sections on your iPad.

Is it possible to have different settings for different podcasts?

I know that you can change the setting for podcasts on iTunes - things like how often they're checked for new episodes and whether they're all kept or deleted after listening.
But some podcasts are more timely, like news programs, and I would like to delete those when they get old. Others are "keepers" and I would like to keep them indefinitely. I know I can go back and manually delete individual episodes, but that's kind of a pain.
So is it possible to change the settings for individual podcasts?
Thanks.

Thanks. There is an option for allowing or not allowing auto-delete, which looks like it may be what I want. I'm giving it a try.

Is it possible to have undefined attributes for an item type...see more in the messag

I want to create an item called 'book' with attributes like title, date of publish, language, pages....and author, but i want that users can assign many authors (as much as users want)....is this possible?? How can I realize it??? Could I create author like a item type too?
Thanks for all

You can have any number of multi table mappings in an item descriptor.
Take a look at the following example
http://docs.oracle.com/cd/E23507_01/Platform.20073/RepositoryGuide/html/s1204repositoryexampleconetomanywitha01.html
You can also open any repository in dyn/admin say userProfile.xml in ProfileAdaptorRepository and see the existing one to many (multi table) mappings.
It just depends on how many multi properties you have in your requirements, create as many multi table relationships.
~Gurvinder

Is it possible to have 2 hostnames for the same ip in 9iASr2 installation??

Hi,
I am going to install 9iAS (9.0.2.0.1) on solaris 5.8, the hostname in nodename and hosts files all point to a name which I don't like to use, is it possible to add another entry in these files for the 9iAS?
The reason behind this is that the 9iAS installation Guide said I can't change hostname after install, but I like to have a meaningful name for the 9iAS when access OEM and HTTP home pages like:
http://goodName:7777
Do you know any other workaround?
Thanks

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

Is it possible to have unique pictures for different iChat accounts?

Hello -
I am new to Macs and am setting up multiple iChat accounts (Google chat, facebook, work, etc.). However, the work picture seems to be overwriting my picture in Google. Ideally I could have my casual Google picture and my more formal work picture coexist under a single iChat group of accounts.
I haven't found a way to do this yet. Any suggestions?
Messages version 7.0.1
Thanks!

Hi,
Although this was possible in earlier version of iChat it is not possible in Messages.
In earlier Versions you could set up separate Buddy lists (the then default)
At each Buddy List pic you could call down the change drop down and select a Pic.
It could be done for each Buddy list.
In Messages when you do this the Pic changes in all Buddy Lists.
NOTES
Changing the pic this way overrides the normal Choice which is the Contacts (Formerly Address Book) pic.
Changing the Address Book > My Card pic will override the Mac Users Account pic which is the default for that.
Put another way when you create a Mac user Account you get to chose a pic that is shown in the Login list (Also System Preferences > Users and Groups > your account).
This gets pulled to the Contacts/Address Book as the My card is created with your other details.
That is turn is used by Messages (or iChat in Earlier versions)
You can change them so that your have three different Pictures.
10:28 PM Friday; November 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

8120 BlackBerry Pearl: Is it possible to have different tones for messages and phonecalls?

Hey all.
My Dad's just got a BlackBerry & would like to have a different tone for his message alert and phonecalls.
Is this possible?
If so...how do we do it?
Thanks in advance.
Solved!
Go to Solution.

Oh yes... your alerts, ringtones and notifications are very customizable.
1. Select the Profiles icon
2. A box will appear where you can quick select between Loud, Vibrate, Quiet, Normal, Phone Only, and Off. If you wish to quick change the device profiles then select the one you want and exit out.
3. If you want to edit the tones assigned to the device applications then select the last option, Advanced
(some older models and OS 4.1 and below will not have the "Advanced" step--if Advanced is not present go directly to Step 4 below).
4. Select the profile you wish to edit. (Loud, Vibrate, Quiet, Normal (default), Phone Only, Off)
Note: on the 8100, 8800, and 8300 models: Do not click the trackball. Instead, click the menu key to the left of the trackball).
Note: The profile that is in use will say: (Active)
5. You will now see a list of all applications that can have a tone assigned (Browser, Calendar, Level 1 Messages, Messages ([email protected]), Messenger, MMS, Phone, SMS, Task ect..)
6. Select the application you wish to edit the tone / notification for
7. You can now edit Out of Holster and In Holster tones/ notifications.
a) Select between: None, Tone, Vibrate, Vibrate+Tone
b) Select the Tune you wish to use
c) Select Volume (options are Mute, Low, Medium, High, Escalating)
d) Select Number of Beeps (options are 1, 2, 3)
e) Select Repeat Notification (options are None, LED Flashing)
f) If set to Vibrate or Vibrate+Tone then select Number of Vibrations (options are 1, 2, 3)
8. Repeat a-e for each of the desired applications listed in 5 above
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to have different rendering for RI and Myfaces for same code

Iam facing with a peculiar problem. I developed custom component using JSF technology. There is a different rendering when I used RI and Myfaces for the same code base. How to overcome such a problem. Please reply.
Thanks in advance

Hi, it is normal, the rendered classes for the standard component have been implemented differently, so you have some differences. Normally, they should follow the SUN requirement but every one can code that following its own interpretation.
Your component is based on which standard component?

How is it possible to have multiple styles for a single control

Hi ,
I have a CSS associated with my MXML File . Now how can i assign all these things to my TextInput ,for example by doing below , i can only assign font Size , how can i assign all these styles at a time to my TextInput
<mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="p">
This is my external css file
.h1 {
    font-size: 24;
.p {
    font-size: 50;
.a {
    text-decoration: underline;
.a:hover {
    color: #FF0000;
Thanks in advnace .

Hi,
Try to combine your declarations.
     .newStyle {
font-size: 50;
       text-decoration: underline;
<mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="newStyle">

Hello, is it possible to have Logic Pro for windows 8?

Hello, i have wimdows 8, could i have the Logic Pro on my PC?
thanks.

I don't think you will have sucess. The problem is that old versions of Logic on Windows had a 2GB memory limit. Which is below the limit for Window 8. I have only read about failures to run old Logic versions on recent Windows versions. Sorry.

Possible to have different ports for incoming and outgoing email?

I need to set up a mail account in Mail where I read incoming mail from port 110, but to send outgoing mail I need to use port 587. Is this possible in Mail? Looks as if you only get to set the port once for both operations.

it is indeed possible. go to mail>preferences>accounts, select the account you already created then go to account information and to outgoing server list, click on the list, go to edit server list and in the advanced pane you can change the outgoing port. for the incoming port, again select the account you already created, then go to advanced, and type in the incoming port.
hope this helps

Is it possible to have dual screens for two Pages documents or APPs? In a Windows system you use control left/right

When trying to work on multiple documents or apps, I like to have a dual screen where by i can see two things at once. This worked when I used a Window's system by pressing Control left/right and i could use both at the same time.
Is this posible to do using a Mac Air?

both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.

JSF-RI. Is it possible to have ID for for elements?

Similar Messages

Maybe you are looking for