JSF : why does my menu keep moving to the middle...?

Does anyone have this problem with their webpages using JSF? I have a menu on the left of my webpages, which keeps moving to the middle each time I make my page width smaller. Does anyone know why?
thank you

I have mine set to Snap to Grid and my Macintosh HD icon stays in the upper right corner, and I’m also using Spaces.
Maybe if you try adjusting the Grid Spacing it would help.
Or you could try moving the finder.plist file to the Desktop from your Users/yourusername/Library/Preferences folder and restarting. If that doesn’t fix it you can move the finder.plist file back to the Preferences folder to replace the new one it created.

Similar Messages

  • Why does my icon keep going to the middle of the page???

    i only have one icon on my desktop and thats mac HD...it seems that whenever i use spaces this icon moves to the top middle of my desktop..i would like it to stay put on the top right??? wat can i do?

    I have mine set to Snap to Grid and my Macintosh HD icon stays in the upper right corner, and I’m also using Spaces.
    Maybe if you try adjusting the Grid Spacing it would help.
    Or you could try moving the finder.plist file to the Desktop from your Users/yourusername/Library/Preferences folder and restarting. If that doesn’t fix it you can move the finder.plist file back to the Preferences folder to replace the new one it created.

  • Why does my iPad keep moving between screens and shaking?

    Why does my iPad keep shaking and/ or move between apps?

    No idea why it is doing that, but try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why does my Ipad keep said that the user and passwork is incorrect and won't let me verify my account?

    Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it?  I've tried to change my password but it still won't let me verify it!

    Why does my IPad 2 keep saying that my icl;oud account user and passwork are not correct but won't let me verify it?  I've tried to change my password but it still won't let me verify it!

  • Why Does My Camera Stop Recording in the Middle of a Video??

    Why does my Rebel T3i stop recording in the middle of me video taping?? Is it because I do not have enough space on my camera for a video? It lets me take plenty more pictures. And when it stops in the middle of a recording, I start recording again, and it works for a little while then stops again! I really don't get it. It is extremely frustrating because I am left with all these chopped up video segments and I completely miss something that my baby is doing (the reason I started taping in the first place!) I am begining to wonder if I should just invest in a video camera instead of taping with my camera. I would REALLY prefer not to, seeing as how I spent a fortune on it, and would like it to do what it is intended to do! Can someone please help?? 

    The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem.  This allows the card to be read by nearly any computer (Windows, Mac, etc.)  
    HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size.  That size is 4GB.
    Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.  
    In pro video, movies are normally constructed by bringing together many very short clips.  The one-long-continuous-take video style isn't used.  If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
    Tim Campbell
    5D II, 5D III, 60Da

  • Why does my cursor keep disappearing in the Google search bar?

    When using FF or Google Chrome, I've noticed that my cursor keeps disappearing when using the Google search bar. I've tried using all the about:config tips, I've downgraded to earlier versions, I've pressed F7, I've unchecked the "hide cursor while typing" option in my mouse properties, I've checked for driver updates, I've tried disabling all add-ons and plug-ins, and I've checked another computer in our home as well. Same thing there. This seems to have become a problem in the last few days. IE seems unaffected by it. Just FF and Chrome.

    No sir, there are no other tabs open, when it happens. For now, I've found a workaround, and I invite you to test it yourself.
    I've been working on this problem all day. I've noticed that the cursor blinks very slowly in the Google search bar. If you press a key while the cursor is blinking "off", it will stay off until you let go of what key you're pressing. Conversely, if you press a key while the cursor is blinking "on", the cursor will remain visible as you type.
    In IE, the cursor blinks much more rapidly, and blinks more "on" than "off." As a result the cursor remains on, no matter what you type or when, or what key you press, including the spacebar. This is not the case in FF or Chrome.
    It was suggested in the Google forums that disabling "autocomplete" has helped with this problem. I followed the instructions and successfully disabled the "auto-complete" feature on Google. When I did that, I immediately noticed that the cursor blink speed doubled, like what I'm used to seeing. Further, no matter what I did, the cursor did NOT disappear anymore.
    The link for google with autocomplete disabled is http://www.google.com/webhp?complete=0
    Go there and see if you notice a difference in the blink speed of the cursor. On my computer, the difference is drastic. While I do enjoy "auto-complete" and will miss this feature, I generally don't rely on it, and much prefer a consistent cursor.
    I greatly look forward to your feedback on this. If you figure out a way to have Google work normally without this workaround, I will be forever in your debt.

  • Why does my 4s keep returning tot the boot screen (apple logo) when I press the home button to see the lock screen?

    3 or 4 times since I first fired up my iPhone 4S yesterday, it has displayed the boot screen (apple logo) when I press the Home button to display the lock screen. After 10-20 seconds the phone displays the lock screen, but at that point it has to search for a cell signal (as if the phone just booted up), which takes another 20-30 seconds.
    Is anyone else having this issue?
    Another thing that has happened only once, but that seems related, is that when I clicked the lock button on the top of the phone, the phone displayed the spinning circle that usually displays when an iPhone or iPad is shutting down.
    Any ideas on what MIT be causing this?

    Disk repair hasn't worked as well.
    I just wanted to add a quick observation: after I tried the TM restore for the first time, Safe Boot in verbose mode seems to be stuck at this line "VBoxAdpDrv: version 3.1.0 r55467". This may point to the problem being a Virtual Box problem.
    I use Virtual Box extremely rarely - haven't used it in many months. After a re-install, I'm going to remove it and then try the upgrade. If it works, then we've probably found the culprit. If it is real, Apple should maybe add a line saying Virtual Box known to cause problems with this upgrade (or fix it ).

  • Why does my cursor keep jumping around

    Why does my cursor keep jumping around the page when I'm in mail or searching with firefox.  Aslo, sometimes my page minimizes for no reason and new pages open. This has started since upgrading to OS X
    wl

    Post in the Microsoft Word for Mac forums. 

  • Why does my iphone keep playing the same song over and over instead of moving on to the next selection?

    Why does my iphone keep playing the same song over and over instead of moving on to the next selection?

    Because you have repeat on.  Turn it off.
    iPhone User Guide (For iOS 6 Software)

  • HT5868 why does my iphone KEEP asking if I trust this computer? I thought it was a onetime thing per computer?

    Why does my iPhone KEEP asking if I trust this computer? I thought it was a onetime thing per computer? I plug my iPhone 4s into the computer and every time I tell it to trust this computer, but a hour later if I plug in again, I have to say trust again... bug? Setting issue? Help?

    http://helpios7.com/trust-this-computer-pop-up-fix/
    This helped me. Fix #1 is something Apple doesn't ever suggest to you.
    My specific problem was somehow my Apple Mobile Device USB Driver got turned off and moved and maybe even uninstalled, but after hours of struggling, this site helped tremendously.
    Furthermore, I could connect my iPhone to my computer but not into iTunes. It would only let me go to access pictures on my iPhone and that's all.
    Best of luck to anyone trying to figure out their problem.
    Justin

  • Why does my computer keep disconnecting from my wifi?

    Why does my computer keep disconnecting from my wifi?

    Some users with various Wi-Fi problems have reported that they were given the following instructions by Apple Support, sometimes with success. After completing the procedure, you'll have to recreate all your settings in the Networkpreference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password. Reboot and recreate the network settings.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller.
    Step 3
    Reset the PRAM.

  • HT1420 Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Authorization and Deauthorization
    See iTunes Store- About authorization and deauthorization for Macs.
    See How to Authorize or Deauthorize iTunes | PCWorld for Windows.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • Why does my iPhoto keep quitting while i'm trying to create a calendar?

    Why does my iPhoto keep quitting while i'm trying to create a calendar

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • Why does my Macbook keep going to sleep every 10-20 secs!

    why does my Macbook keep going to sleep every 10-20 secs when first turning on then it seems ok after about 10 mins ? This has only happened since upgrding to Lion 3 days ago, it's driving me mad!

    You are most welcome

  • Why does this message keep appearing when i try to instal windows 7 through bootcamp? - "something went wrong and the USB cannot be configured for the installation"

    Why does this message keep appearing when Itry to instal windows 7 through bootcamp? - "Your bootable USB drive could not be created. An error occurred while copying the Windows installation files."

    Found a solution!
    Follow the extended version of these directions here:
    https://discussions.apple.com/docs/DOC-3581
    Worked like a charm!

Maybe you are looking for

  • How to find out number of  years worked using sql

    Hello, How to find from a table which has hiredate and should return number of years worked with range like 0-5, 5-10,10-15 etc. Any help is highly appreciated. Thanks

  • How to send text-attachement in mail ?

    hi there, i have a workflow in which a user can attach a RAW-document to the task. there he puts in a text. now i want to put that text in an email in the next step of the workflow. but how can i manage to get the text in my emal ??? reg, Martin

  • FB60 Invoice posting system is showing blocked for payment

    Dear all, When ever we post FB60 Vendor Invoice document system is showing blocked for payment error. In OBA5 we changed the message warning to Error thats why it is showing error message. In XK01 vendor master we have put it as Payment Block "B". Wh

  • Network user log in problem

    Can not create a network user, with home on the server. I;m sure I am missing something, but can't seem to find it. Any suggestions/pointers greatly appreciated. The layout: Server = Mini, 10.6.2, Open directory master, private network Client1 = G4,

  • Third Party Signature on contract

    I've developed a contract and need a third party to sign it. Would like to use a digital signature idea - or a "click-through" accept. I found how to create a digital signature for myself. Does anyone know how to save the form then allow and require