JSFL reg point move does not save correctly

I have come across an issue in flash pro while using commands written in jsfl.
I have a jsfl command that moves registration points on a selected library instance. A snippit of the command that does the moving is:
fl.getDocumentDOM().enterEditMode('inPlace');
var ele = fl.getDocumentDOM().getTimeline().layers[0].frames[0].elements[0];
ele.x = 0;
ele.y = 0;
ele.x = -ele.left;
ele.y = -ele.top;
ele.x += newRegX;
ele.y += newRegY;
fl.getDocumentDOM().exitEditMode();
After running the command everything looks good. The reg point has been moved to where I want it to be.
However, if I save and reload the fla the registration points show back up where they were before the move command.
It seems like the jsfl move values are not being saved correctly. Is this something others have seen before? Is there a fix to this issue?
Thanks.

Yes I have also found the saving bug when messing with the transform point and jsfl.
I was trying to move the registration point to the current transform point.
First version of the code it all worked fine but after saving and opening again only the first frame had moved.
Second version of the code I went through all the frames and selected then deselected all alements on each frame - this seemed to fixed the issue. - manually doing it did.
However I then noticed I was still haveing some issues - this could be fixed by manually entering the symbol and moving the transform point - saving and opening then worked.
I could not however do that step with code (well I could but it didnt fix the issue)
Am Going to look for other thisng that might help - adding a new layer - or something that will force flash to realise that things have changed.
But this is definately a flash bug - when everything looks and works fine but the reverts to something else after a save and reopen - suggests a much larger bug with saving.

Similar Messages

  • Embedded movies does not autoplay correctly

    Our organisation has recently begun to publish QT movies (in sign language). The first batch worked as it should, the movies started as soon ther was enough streamed media in the web browser. The second batch it didn't work. The whole movie has to load before it start to roll. Sometimes it doesn't start at all (Safari 3.0.4) . We use the tag autoplay="true" in both cases. Can settings in the QT file affect the behaviour? They have been compressed in iMovie with the same settings as far I can tell, but maybe I did change something between the batches.
    URL's:
    http://www.sprakradet.se/servlet/GetDoc?meta_id=2421 (working)
    http://www.sprakradet.se/servlet/GetDoc?meta_id=2500 (not working properly)
    Message was edited by: Tommy Lyxell
    Message was edited by: Tommy Lyxell
    Message was edited by: Tommy Lyxell

    No problem. As an aside, it's not so much a bug as it is just how QuickTime works. Fast Start can be enabled for a file, but if the file changes in any way (cutting content from the file, changing annotation information then just Saving), the plugin can no longer make assumptions about the content of the file and play it as if it was streaming. By doing a "Save As...", you allow QuickTime to create a new file with all of the content formatted in such a way that the plugin can begin to play before receiving all the content.
    Once you're aware of this, it makes a bit more sense.

  • Export as pdf from safari does not save correctly

    I used to be able to print a page and save it as pdf. When I do this the page saved is blank. What is going on? This is since updating to Mavericks.

    It happened in Firefox as well and the preview image in the print dialog box was blank. Trashing two adobe pdf plug ins from the /libraryInternet/plug-ins fixed my issue. I am not sure if this will cause me issues in Adobe Creative Suite but so far it looks okay. I am not sure what you mean by /applications/utilities/console How do I get look at the console? I opened the application and I have no idea what to make of the Console.

  • Placed .swf does not play correctly

    I have placed a .swf on a page.  When exported to pdf the movie does not play correctly.  It plays correctly before being placed.  I used flash cs4 actionscript 3 to create the .swf.
    I have selected the highest level for pdf when exporting.

    ok!  I figured it out.  This is what is happening.  Apparently when you place a .swf in indesign and make a button on the page to show the movie when clicked and then export to pdf -- there is a time delay from the time you click on the button and the movie starts to play in a floating window.   Its just a few frames of 24 fps movie but that is enought for whatever gaget that reads the movie to miss the first few frames.
    So in effect any info in the first few frames is not read.   So i had a stop on the first frame that was not being read.  I put the stop on frame 7 and now it plays just like I had hoped.
    I hope this helps anybody else out that has had a similar problem.

  • I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
    It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
    You could also list any relevant error messages you encounter.
    What version of FCP X are you using?
    All these things will make it easier for people to help you.
    Andy

  • My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

    My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
    This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
    Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
    Note 2.) I am going to do an import converting everything to .dng  to see if this is a work around.
    Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
    Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
    Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

    Happy New Year!
    The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
    The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
    The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
    Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
    Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
    This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
    I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
    SUGGESTION
    Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
    Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
    Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
    Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
    Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
    Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
    The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
    The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
    Now go back and adjust the Contrast control to establish the best midtone contrast
    If necessary “touch-up” the controls using the same top-down workflow.
    If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

  • After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

    I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

    Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
    You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

  • I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

    I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

    artisttouch,
    If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
    To solve it, you may try the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I get the firefox pop up "do you want to remember this password", but it does not save it. There is no "yes" option on the pop up. How can I get Firefox to save my passwords?

    I want Firefox to save my passwords as it has in the past, but now it is not doing so. I am using version 6.0.2, I see the pop up asking to remember the password, but firefox does not save the passwords. What can I do to correct this so FF starts saving my passwords?

    Firefox 4 and later versions place a key icon on the location bar that allows to (re)open the dialog to save the password at any time.<br />
    That pop-up dialog has a button labeled with "Remember Password".<br />
    If you click the arrow next to that button then you see the other choices ("Never Remember Password for this site", "Not Now").<br />

  • Report Template does not save

    HI,
    I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again.  Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout.  Even though I say 'check', it does not save at all.
    Can anyone help.  I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
    Am on GUI 7100.3.12
    Patch 12
    Any recommendations ? Thanks

    Hello Sanjay,
    It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
    1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any     external server for document storage.
    2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses.  Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
    If you have configured external server for WWI docs, then you need to define different data carrier.
    Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
    In that case, you may like to refer following SAP notes in sequence.
    995736,1005225,1091699.
    regards
    Pavan

  • Acrobat 9.4.2 does not save/export all graphic formats

    Dear all,
    Obviously i had my glass of wine to early! See http://forums.adobe.com/thread/798630 for the whole story of my re-re-re-istallation of Acrobat.
    The installation of 9.0 from the TCS2 DVD was OK
    After update to 9.2 my tests displayed correct results for all desired tasks
    After the update to 9.4.2 i obviously did not test thoroughly enough (hence the glass of whine).
    Later it turned out that 9.4.2 does not save/export graphic formats:
    pdf (all flavours), eps and ps are exported correctly
    html (all flavours) export a html file and the image as jpg correctly
    jpg, jp2 does not save anything, and no error message gives a hint
    doc, rtf save issue error message "Save As failed to process this document. No file has been created"
    png and tif do not save anything, and no error message gives a hint
    xml table and xml export correctly
    txt (both flavours) are exported correctly
    Hence the only method i can get a picture is to export as HTML and through away the HTML... or: enlarge the picture as much as possible on the screen and take a screen shot.
    What is missing in this installation?
    During my re-re-re-installtions some Windows updates may have happened.
    Any help available for this issue?
    Klaus Daub e

    The story goes on and hopefully Adobe has an answer/fix for this
    There was an automatic update from 9.4.2 to 9.4.3, but the problem still existed.
    So I decided to uninstall Acrobat and re-install it for the nth time: start with the installation of 9.0 from TCS2, reboot, update to 9.2, reboot, update to 9.4.3 and reboot again.
    The result is very mixed (and this was alrady with the newly installed 9.0):
    Save as RTF or DOC creates RTF and DOC files - although the contents is not that useful.
    Save as PNG is OK
    Save as JPG, JP2 or TIF works, but it turns out, that the files are all PNG (although with the various extensions)!
    Creating a snapshot now works correctly. The clipboard receives a bitmap. However: although I have set the preferences for the snapshot to be of 96 dpi the bitmap gets the property 72 dpi!
    Setting acrobat.exe to be Compatible to XP SP3 does not change a jota.
    Keep in mind: on Windows XP things worked correctly for a long time. Switching to Window 7, x64 creates this strange problem.
    I need to start with Acrobat from the TCS2 DVD, because otherwise I do not get the correct implementation for working with FrameMaker.
    I'm very reluctant to buy Acrobat X, for me there are too many gimmics there (besides the costs).
    Klaus Daube

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • Not displaying photos and does not save projects

    Hi all
    things just go from bad to worse for me!
    apple's update fixed my big problem of disapearing buttons but still made imovie unstable in MY user account (it worked for about 1hr now quits as soon as it opens)
    so i created a new user account
    it at least works BUT
    - does not save my projects. if i quit and then reopen - all my work has gone. (no error message is displayed) it saved the fisrt time i used it in this new user account, now, no more.
    - also - when i add a photo to the movie, it never displays. its just black. its a photo thats form iphoto in the meadia broswer window within imovie.
    honestly if there are any apple people reading - its very VERY frustrating having purschased something a month or so ago and not being able to use it still.
    hopefully someone out there can help!
    thanks all
    Message was edited by: Sammy Valencia

    installed leopard - problem solved

  • Acrobat 11.0.5 PDF Maker does not save attachments in Outlook 2013

    I had lots of problems getting PDFMaker to work in Outlook 2013.  Finally with 11.0.5 ver it appears to work.
    Unfortunately....when saving attachments it does Not  save the attachments.
    This is a very serious problem as I am dependent on archiving emails.
    Does anyone else have this problem.  Is there a solution.  
    Looks like I need to use non Adobe product...... which is crazy.

    Hi gnits999,
    Please make sure that you have set the correct PDFMaker settings:
    Go to Acrobat plugin in Outlook -> then click on 'Change Conversion Settings' -> and under 'Settings' tab check following highlighted option.
    Regards,
    Anoop

  • Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

    I use the CS6 suite with Acrobat XI at windows platform.
    When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
    I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
    What is the reason of this bug?
    Before with Acrobat X this worked without problems

    Hi Rob,
    I was told the new way to work would be to draw files via Bridge direct into the InDesign file
    and I thought automatically the color would not be changed.
    my colourmanagement setting in bridge for the whole CS6 was  ECI isocoated_V2_300
    The Illustrator file was saved without color profile.
    In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
    DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
    “e.V.” was set to 100 % k
    I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
    no color conversion
    convert to profile
    convert to profile keeping existing values
    in all tree files the pirates background has 322 % ink coverage instead of 291 %
    Why does Acrobat convert “black” in the wrong way?  If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
    Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
    The same happens also by saving as .pdf X3 or .X1
    The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
    I also made test with the new ECI profiles for laminated prints from 2012.
    And with newspaper profiles
    In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
    And then the 100 % k converts to cmyk, what I don’t want to have with text.
    Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
    And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
    I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
    enclosed you find my files
    Kind regards
    Lutz Hanbueckers
    Hanbueckers Werbung GmbH
    Brandsackerstr. 5
    40764 Langenfeld
    P.O. Box 40 02 01
    40242 Düsseldorf
    Tel. +49 02173 1 09 44 - 0
    Fax +49 02173 1 09 44 - 10
    [email protected] <mailto:[email protected]>
    www.hanbueckers.de
    Visit our site
    Steady attractive offers!!!
    HR Düsseldorf B 26 480
    owner Manager: Lutz Hanbueckers
    Von: Rob Day [email protected]
    Gesendet: Samstag, 2. März 2013 04:26
    An: Hanbueckers Werbung
    Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Maybe you are looking for