[jsp]can i use a simple editor in stead of an input  zone?

hello friends,
am developping a web site with the framework struts and jsp and in one part that deals with news i use an input zone(in my .jsp) to put my news in the right table like this :<input type="text" >.
I would like to ask you if it's possible to use a simple editor ( that allows me to modify the size ,the color oh the text for exemple ,..)instead of the input zone.
Thank you in advance.

there are open source editors, like tinymce that allow you to do html editing.
http://tinymce.moxiecode.com/

Similar Messages

  • Can I use the WYSIWYG editor in Firefox?

    How can I get a WYSIWYG editor in Firefox to use in Delphi Forums?
    Thanks,
    Catherine Climpson

    Hi Catherine,
    Most forums have a built in wysiwyg editor. If you are simply looking for one to use though, you can check out:
    http://ckeditor.com/demo
    The ckeditor is one of most commonly used editors in the industry. There is a ''New Page'' button next to the ''Source'' button that will let you try it out.
    Hopefully this helps!

  • How can I use the Formula Editor?

    When I click on the "Insert" menu and try to insert a function, every option is grayed out. What additional software is needed to use the function editor in Pages?

    I'm nbot sure of what you try to achieve.
    The Insert Function menu item is designed to enter functions used in table's formulas.
    So it's active only if the cursor is in a table's cell.
    Maybe you are trying to draw an equation and this tyask requires the availability of the third product entitled MathType.
    Yvan KOENIG (VALLAURIS, France) mercredi 30 décembre 2009 22:18:09

  • Can I use a simple Excel file on my phone and open it on my PC?

    I'm a PE teacher who collects fitness data while outside and then tranfers it to an Excel file on my work PC.  I usually collect by pencil and paper and type it in later.  Is there an app or can I use iCloud to use my iPhone 4 to collect my data and then open it up on Excel?

    Just to add to what Winston said, there are a lot of Office-type apps that will do the job better than Numbers in my opinion.  Examples are Documents to Go, Quickoffice, Office2HD but there are others.
    Numbers is an OK app if you want to use the files created on iOS devices in Numbers on your Mac, but when it comes to MS Office compatibility, it is defficient.  The apps I mentioned above all do a reasonable job in terms of Excel compatilibility.
    In terms of accessing the files on your PC, use a free service like Dropbox to sync your documents on iOS and PCs.

  • Using rich text editor in new asset type input form

    Hey everyone,
    I'm currently trying to create assets based on a newly created asset type (which I of course, created). However, the STORAGE property I declared in the asset definition file is to support formatted text, which would normally be pasted from word documents. Note that I'm using the Basic Asset Model.
    Thus, I need a rich-text editor to be used in the content input form. So, after looking at the tags reference in the developer's documentation, I thought that I could use EWEBEDITPRO to achieve my goal but there's always an error mentionning that the component can't be launched. I supposedly have to configure two parameters, one of them being the path for ewebeditpro.js. I looked for that but haven't found it. On the other hand, I looked at the Oracle WebCenter Sites Property File document and that one stated that EWEBEDITPRO is deprecated and not supported (?!?!).
    So in short, what can I use, as a rich-text/html editor?? Thanks in advance for any reply!
    Edited by: DigitalSelf on May 24, 2012 2:26 PM

    Thanks. From what I've read in the developer's guide, CKEditor was available with assets built from the Flex model. However, I'm currently having a hard time trying to display the content of an attribute with content input through the CKEditor, because it's stored in a blob. Although I've found several examples showing how to read the content of a blob, none of them worked for me...

  • Can I use the thunderbolt output to a component video input to my home theater

    I am trying to get video from the thunderbolt connection to my home theater using component inputs--can it be done

    You would need some sort of conversion routine. I'm not sure how well it would work, but you can likely use a Displayport to DVI adapter, coupled with a DVI to Component adapter, such as this pairing: http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2
    Alternatively you could use VGA adapters instead of DVI. I havent tried this personally, but it definitely has worked for some.

  • Can not use Front-End Editor (New) mode in ABAP Editor

    Dear,
    If i change to Front-End Editor (New) mode, SAP Guide will be pending (cannot do anything on this section).
    What is happenning? Pls help.
    Thanks,
    Quanglv

    >
    Le Vinh Quang wrote:
    > It's maybe the last way. But i want to rerolve it firstly.
    > If i use other user (operation system). It has no problem. :S
    Check other system SAP GUI version and your system GUI version.

  • How can I use a FLV/MOV as one of 2 inputs?

    I was wondering if anyone knew of good way to add a video to
    a 2 input filter (that isn't a blend)?
    I'm using a filter that is a lot like (Ryan Taylor's)
    DisplacementMapFilter:
    http://www.boostworthy.com/blog/?p=245
    Which I've seen work with still images, but I would love to
    see it work with a movie as 1 of the inputs.
    If I can get help to make Ryan's filter to work with a FLV or
    MOV, then I can get it to work on the filter that I'm working on.
    I've got it to work with JPGs (by applying it to a BitmapData
    object). And I've got a movie to work with a filter with 1 input
    (which is pretty easy). But this one has really stumped me.
    When it's a blend its really easy, but filters like (Ryan
    Taylor's) DisplacementMapFilter.pbk won't work with just a
    blendShader.
    PLEASE HELP!

    Quick and easy way to do it:
    1) Load each video into an FLVPlayback instance. Listen for
    the PLAYHEAD_UPDATE event.
    2) onPlayheadUpdate, grab your frames with bitmapData.draw().
    3) Supply those bitmapDatas to the shader:
    shader.data.image1.input = bitmapData1
    shader.data.image2.input = bitmapData2
    4) Draw the result with the drawing API's beginShaderFill
    method.

  • Can we use the output of a report as in input for the other report?

    Dear All,
    I would like to know if we have any option in OBIEE where in we can save the output of a report and use it as a filter for another report?
    My scenario is like:
    1) I have a report on ORDERS which gave me 250 orders.
    2) I want to have a report on SHIPMENT table for these 250 Orders.
    Can we save the result of report 1 as a filter and use it in 2nd report?
    please advise.
    Thanks,
    Suma

    Hi,
    By using advanced tab in filters like filter based on another request we can achieve this
    Regards
    Naresh

  • Can i use PCI 6115 both as an output and input device simultaneosuly?

    I would like to use PCI 6115 data acquisition card from National Instruments for both generating a signal and then configure it for receiving the generated signal. I am using MATLAB program.I ran a program and it shows no error. But the results are not what I expected. Any help will be appreciated

    Hello,
    The PCI-6115 can receive and generate signals. It can actually do both at the same time. However, this depends on how it is programmed. Since you are using MATLAB, I do not know what I can do to help. Are you making calls to NIDAQ32.dll?
    Please post any follow questions or maybe some more information on what you are seeing.
    Best regards,
    Justin T.

  • How can I use bookmark script to deselct sidebar option by default?

    I am trying to include a User Friendly 1-Click link on my site to automatically bookmark a page.
    Using the Ultimate Bookmark script this works fine in IE, but when the bookmarking window pops up it always has the "Load this bookmark in the sidebar" option pre-checked by default.
    When testing the script I missed that point & took me quite a while to figure out what had gone wrong.
    The thing is that while I may be fairly Computer Savvy, it must be be assumed that the vast majority of the visitors to the site are not, so what I want is to be able to deselect the Sidebar option by default, allowing the user to select it, should they want it.
    Can I use a simple snippet of code in order to facilitate this?

    Those page javascripts for "Bookmark this Page" either don't work for Firefox or automatically "check" the "Load this bookmark in the Sidebar" in Firefox (and other Gecko based browsers). A Bug was filed 10 or 11 years ago to address that "Load ... bookmark ... Sidebar" issue, but it was closed with WONTFIX. The developers feel that "fixing" that feature might create a potential exploit for Firefox users.
    Best thing to do is under that "button" for other browsers, is put text along the lines of "Firefox users can Bookmark this Page using the Star or with Ctrl + D."

  • Using Unified CCX Editor in offline mode ?

    Hi,
    Can we use Unified CCX editor (7.0) (for IVR scripting) in offline mode ? Or, we have to connect to server and pass the authentication to use the editor ?
    Thanks.

    This is in theory supposed to work after you log in against the server the first time. The CCX editor is supposed to copy the license file locally and allow for offline functionality. In practice this doesn't really work reliably or at all. You might want to search for a bug on it and open a TAC case if one doesn't exist.

  • Whats types of inputs can be used with DAQ 6527? (PNP or NPN)

    I need to know what types of input device (PNP or NPN) can be used with a DAQ 6527.

    Greetings,
    The digital inputs of the 6527 require TTL signals. As long as your device, whether it be a pnp or npn transistor, outputs a TTL signal, it will be compatible.
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • How can i use( API_SEMBPS_REFRESH) in my developement for Clearing Buffer

    Hi All,
    How can i clear the buffer values ??
    How can i use( API_SEMBPS_REFRESH) in Web interface builder?
    Any Inputs on this....
    Thanks,
    Edited by: NnSiri Siri on Oct 28, 2008 3:40 PM
    Edited by: NnSiri Siri on Oct 28, 2008 8:58 PM
    Edited by: NnSiri Siri on Oct 28, 2008 8:59 PM

    Hi,
    There are two ways to achieve this depending on how you want to refersh the web interface:
    1. Anytime during the execution of web interface:
        a. Create a Z function module and insert a call to API_SEMBPS_REFRESH there.
        b. Then create a planning function exit and in Function Module field call your Z function module.
        c. Create a button in Web Interface and call the planning function exit on that button.
        This will call the refresh function whenever user will click on that button.
    2. At the load of Web interface:
       a. Create a Z class in SE24 by copying the class CL_UPWB_BSP_APPL as super class.(This
           class is default application class for all web interfaces).
       b. Redfine LOAD method of your custom class and add call to FM API_SEMBPS_REFRESH.
       c. In your web interface, set the property 'Application Class' to your custom application class.
       This will call the refresh function every time you start the web interface.
    If you will add your code in auto generated BSP application for your Web interface you have to re-write the logic in BSP application everytime you make change in your web interface and generates it in Web Interface builder. Because the system overwrites the BSP application everytime the Web interface is generated.
    Regards,
    Deepti
    Edited by: Siegfried Szameitat on Nov 3, 2008 10:06 AM
    deleted request for points.

  • How Can i use Html frames with  simple JSP???

    How Can i use Html frames with simple JSP???
    Actually i am creating an application in which i have used Index.html as frame.
    Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
    Hoe can i do like this???
    Anand Pritam

    Well i am using..
    < Base target="mainwindow">
    But it is no working is there some other way??

Maybe you are looking for

  • I need help on iPhoto to print more than one picture at a time

    I would like to know how to print 4 pictures on an 81/2x11 sheet of paper?

  • RMAN backup and restore for Disaster Recovery

    Hi Guys, I am very new to Oracle and have a question about RMAN backup and restore feature. I am simulating a disaster recovery scenario by having two VMs running oracle 11g, say hosta and hostb, hosta is sort of production db and the other a disaste

  • Music DVD .. 10 Hours of Audio? Slideshow??

    Roxio Toast has a Music DVD option that can add hours of audio on a single DVD. I tried to look for info on how to do this in Encore .. but there is nothing. As a slideshow, my test only had three audio files .. which took up 1/4 of the disk. What is

  • Diagnosing Kernel Panics

    I just upgraded my MBP from the 2.0 Ghz Rev 1 to the 2.33 Ghz Core 2. I transferred everything to the new computer via Firewire Target Disc Mode. I am experiencing shutdowns and kernel panics. Can someone take me through the steps to figure out what

  • How to add a single Button to multiple pages

    .....using Acrobat 9 pro Extended? I wish to place a single Button, (containg the same action), onto nearly 1000 pages in the same document, without having to laboriously copy/paste to each and every page. How can this be achieved please? I have trie