JSP contacts application.

Hi everyone, I new to developing in JSP.
I want to develop a web application that holds some records, say in a table.
Can someone please point me in the right direction using lists and tables in JSP for making a CRUD web application.
I've seen you can create trees, tabs, check boxes and lists in a jsp, but haven't found a tutorial on it.
Thank you.

You will need to learn JDBC- How to connect to db using java, performing database operations etc. Here is the tutorial link for JDBC.
[JDBC API|http://java.sun.com/docs/books/tutorial/jdbc/index.html]
And here is the tutorial link for Java Servlet and JSP.
[Web Tier|http://java.sun.com/javaee/5/docs/tutorial/doc/bnadp.html]

Similar Messages

  • When i try to instal itunes on pc i get this message.      This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack.  HELP

    when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

    Hello annesmith1954,
    Thank you for using Apple Support Communities. 
    You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC. 
    "Could not open key" message when installing iTunes or Apple components for Windows
    Regards,
    Jeff D. 

  • Receive message when downloading ITunes or Safari for Windows 7 64 Bit.  "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

    Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened.  Verify package exists or contact application vendor to verify this is a valid Windows Installer package". 

    I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

  • Frame issue in jsp/struts application

    I have a problem with jsp struts application .
    i have a jsp page which is inside a frame .
    The action class which receives the request from this page redirects the request to another jsp page.
    I want this new jsp page to be displayed without any frame , but it is getting displayed from inside the frame .
    can anybody help me out ...
    regards,               
    slam

    Possibly:
    1. Browser could be caching the page.
    2. If you use a proxy, the proxy may be caching the page.
    3. The page is not getting recompiled.

  • Bugs in the Contacts Application

    When I create a Group in the Contacts application, I do not seem able send that group an email.
    I have tried to use the contextual menu to do that, and by dragging the list to the email window.
    The group either does not show up or appears as an empty list.
    Andy

    First of all, when you say "the Contacts application," are you referring to Address Book? Address Book is the Mac (Lion) contacts database. If you are using something else, that probably explains it. Switch to Address Book.
    Assuming you are using Address Book, then yes, you should be able to send to groups. You'll want to drag a group from Address Book into the To: or Cc: or Bcc: fields in a new mail message. (Also, I'm assuming you are using the OS/X Mail application -- if you are using something else, this may not work). Make sure you drop the group into the To:, Cc:, or Bcc: fields at the top of the mail message.
    You can also just type the name of your group. If you have a group named "Family" as you start to type it (in the To:, Cc:, or Bcc: fields) it should autocomplete and give you an option to pick the group.
    Also, be aware that in Mail's preferences (on the Composing tab) there is an option to "when sending to a group, show all member addresses." You'll want to check (or not) that box according to your preference.

  • HT1338 How do I create seperate contact groups (family, business, friends) in my Contacts application on my Macbook Pro?

    How do I create seperate contact groups (family, business, friends) in my Contacts application on my Macbook Pro?

    You should have an option to create groups in the File menu. To add contacts to this group, simply drag and drop them to it (switch to Groups display, to view all your groups).
    Otherwise, you may create "smart groups", based on some criteria you define (File menu too).
    Hope this helps.

  • Implementation of type-ahead functionality in Endeca JSP Ref application

    Hi all,
    I am trying to implement the type-ahead functionality in Endeca jsp reference application which Oracle is shipping with it's products. The type-ahead functionality is not present by default. Can anyone help me to implement the same thing or provide sample code/strategy to achieve the desired results ?
    Basically typeahead functionality is present in Endeca Information's quick start's search box (EID) but not it JSP reference application .
    Waiting for the replies...
    Regards,
    Hoque

    Type-ahead functionality can mean different things and be implemented in different ways. It is usually based on what behavior your user-space would benefit from.
    In the commerce space, one popular use-case is to return Category matches based on what a user has started typing. Within Endeca, this boils down to doing a dimension search and having the Category dimension enabled for dimension search. If a user starts typing "cam", the type-ahead would then recommend:
    Category: Cameras
    You can match on multiple dimensions though, so long as they are enabled for dimension search. For example, if a user starts typing "ca", the type-ahead could return:
    Category: Cameras
    Brand: Canon
    Furthermore, this behavior can be extended by enabling Compound Dimension Search. Compound Dimension Search is enabled via a flag on the dgidx process and on your ENEQuery. It provides the following behavior. If a user searches for "canon cam", it would suggest:
    Category: Cameras + Brand: Canon
    Clicking on the type-ahead would return the intersection of Category = Cameras and Brand = Canon, eliminating a click if the user is after Canon brand Cameras.
    With regards to implementation, it basically boils down to an AJAX call to a service/URL that responds with dimension search results. Then populate an empty <div> with links.
    Other scenarios involve returning Product/Record matches instead of Dimension matches.
    Edited by: gose on Sep 11, 2012 8:31 AM

  • Best way to manage images on jsp web application

    Hi,
    Am developing a jsp web application, in that project, the user will upload the image files, now I created an image directory in the context root and when the image is uploaded by the user it is saved in the /images directory and the image path is saved in the database. I can display this image using the <img src="images/a.jsp" > tag.
    but when I rebuild the project all the images in the /images directory get deleated but the image path is remained in the database, is there any method that I make /image dir outside my project context root so that when I rebuild the project the /images dir can get changed and my project will save images outside the context root that is in the /images dir which is now outside the project context root. and is it possible to display those images using <img src""> tag. because this time my /images dir is at D:/images . what could be the best method or way to handle images with the web application.
    any suggestion will be helpfull

    Well my friend as per your given case there are to two ways of approaching your problem.
    Case 1:
    How to save the relevant data ??
    .Create a backup folder Workstation on which you are hosting your application where you can store all the uploaded files which is outside the scope of webserver(However we can write a dedicated servlet which can access that file) and make sure we pickup from any the folder path from a specfic MessageResource bundle or an context/servlet init parameter in web.xml.
    .Write a Upload servlet/Backing Bean which saves all the files in the discussed folder using utility packages like Commons FileUpload,Oreilly MultipartRequest & etc and then register saved fileName in the database user specfic table specific to user.
    How to display the Image ??
    .Write a dedicated servlet which can pickup user related fileName specfic information from the database and the read the file from backup folder by constructing the path from the entry made as a init param in web.xml or any other custom MessageResource bundle and then stream the Image data using the ServletOutputStream.
    NOTE: do not forget to pickup & setImage file ContentType & Set the content length.
    .Just try to render the JSP view file where we are displaying the displaying the images by calling the dedicated ImageServlet.
    <img src="ImageServlet?userid=2345" align="center"/>Try to refer below posts to get a better understading.
    Dedicated Image Servlet:
    http://forum.java.sun.com/thread.jspa?threadID=5208858&messageID=9840042#9840042
    Uploading Files Using Servlet:
    http://muimi.com/j/jakarta/commons/fileupload/
    Case 2
    The second method would more or less the same but here we would save the uploaded file
    content is saved in the Database as a Blob and we would retrive it back using a dedicated image servlet again.
    However,in terms of performance the second case implementation is very costly.
    Try to refer below posts to get a better understading on the second case.
    http://forum.java.sun.com/thread.jspa?threadID=5193481&tstart=50
    http://forum.java.sun.com/thread.jspa?threadID=5211649&messageID=9853670#9853670
    Hope this might help :)
    REGARDS,
    RaHuL

  • How to solve the Installation runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support..."

    After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
    However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
    How can I solve this ?
    Please help !!!!!!!!!!!

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • Contacts application, where is it?

    i have the older version (2.0?) of the iPhone, and I have seen people with the new version and the old version, who have the new update, and they have that 'contacts' application as its own selection on their main screen, without having to access it by going to the phone and then to contacts. how do i get that to show up? or what do i have to download(i just got the new update) to get my contacts in its own special little space? =]
    thanks

    This feature was included with firmware update 2.0 so you should have it. This application cannot be deleted from the iPhone's Home screen. If you have a number of Home screens, have you checked each Home screen for the Contacts application?
    There is no way to download this separately. If you don't have it available, I suggest doing a Restore with iTunes. Be sure to sync your iPhone with iTunes immediately before restoring to update your iPhone's backup if needed.

  • Where is the data stored for the Contacts application in OS X 10.10?

    My client uses Backblaze online backup, and recently needed to retrieve his contacts. Is the data stored in the app itself, or somewhere else? Backblaze doesn't back up applications by default. Is there a way to instruct Backblaze to back up the Contacts application?

    Thanks, lllaass.

  • Contacts application broken, how to reinstall it

    I can create contacts in the Contact application, but it doesn't save it. when I restart the applicatio everything disappeared.
    I tried to import contacts but it doen't create anything neither.
    Fresh install of Mac Os X 10.9

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • How do I remove duplicate Google accounts in the Contacts application?

    I reinstalled 10.9.
    I entered my iCloud credentials, and prevoius settings, including the Google account information appeared.
    I tried to log in to mail.google.com and Safari asked to add this account, to which I confirmed.
    Now I have two Google accounts in the Contacts application, but only one in the iCloud prefs. panel.
    It is somewhat annoying, is there a mehtod to fix this?

    The manual doesn't address it because there is no way to do it on the iPad. You can create groups in iCloud.com in a web browser, but that does no good either because the built in mail app will not let you use groups.
    Look at these two apps for that functionality
    MailShot- Group Email Done Right! for iPhone, iPod touch, and iPad ...
    Group Email! Mail Client with Attachments for iPhone, iPod touch ...

  • Contacts created from recent calls not showing up in Contact application

    recently added contact from recent calls section.  Tried to find contact in the Contact applicaton and it wasn't there.  I was able to find it by searching the phone and the name came up when I received a call from the contact again.  How do I get it to appear in the Contact application for easier access?  Do I have to create the contact in the CONTACT APPLICATION for it to appear?
    Thanks for your help.

    After calling Verizon, here is a fix that worked for me.
    1.) Look at your contacts information on the iPhone. If your phone numbers are not formatted with the parentheses and dashes, and are just a string of numbers like this: 1234567890, it likely means something went afoul in the initial sync. This is a good indicator that the following will work.
    2. BACKUP YOUR IPHONE ON ITUNES before you go any farther. You may eject the iPhone at this point or leave it connected. I left mine connected to my desktop.
    3. Then go to Settings > General > Reset > Erase All Content and Settings. You will receive a prompt or two to make certain this is what you want. Proceed.
    4. Let the Reset process conclude. It may take a couple minutes or so.
    5. You will have to go through the re-activation process afterwards. Slug through it.
    6. When all that is finished, reconnect your iPhone (if you disconnected it after backup).
    7. When asked, select "Restore iPhone from a Backup". Let the process finish.
    8. Now, check your contacts. If instead of seeing a line of numbers for your phone entries, you see a number properly formatted like this: (123) 456-7890, then you have likely solved your problem.
    9. Try calling your iPhone from a phone that is in your contacts list and see what happens.
    10. If this doesn't work, you will likely have to call Verizon or Apple. The Verizon tech support agent said that the issue has been sent to Apple for resolution. It may be something amiss in the initial install of iOS to the Verizon phones. Who knows, but this is defnitely a software issue of some type.

  • JSP Sample Application

    We installed the SQLTAGLIB application from JSP sample application publish on TECHNET.
    Compiled and Run it successfully.
    Now we are trying to develop some Page using
    sqltaglib.tld but while compiling,
    on this line
    <%@taglib uri="sqltaglib.tld" prefix="sql" %>
    get this error message
    [ Start of root element ]
    pl. give the solution.
    Thanks
    null

    Here is some info from the docs:
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Note the following requirements for using SQL tags:
    Install the file ojsputil.jar and include it in your classpath. This file is provided with the OracleJSP installation.
    Make sure the tag library description file, sqltaglib.tld, is deployed with the application and is in the location specified in the taglib directives of your JSP pages, such as in the following example:
    <%@ taglib uri="/WEB-INF/sqltaglib.tld" prefix="sql" %>
    For general information about JSP 1.1 tag library usage, including tag library description files and taglib directives, see "Standard Tag Library Framework".<HR></BLOCKQUOTE>
    Please post follow-ups in the OTN Sample Code forum.
    Thanks,
    -rh
    null

Maybe you are looking for