JSP doesn't finish processing

I have a set of data that I sort using the Collections class and then I output the data one element at a time from the List. However, after a little over 30 seconds (30s-35s) the page stops being writting and displays just what it has. Now is this some timeout setting in the JSP or is it more likely a server setting? Any ideas as to why the page does not finish processing?

It sounds like a timeout problem. Most servers have a timeout but you should eb getting some type of timeout error page.

Similar Messages

Lion Disk Utility doesn't finish erase

Since installing Lion (clean install) disk utility doesn’t finish erasing or partitioning external disks. I used the disk utility from the install drive to erase the internal drive before installing Lion, this worked fine, but ever since it failed to erase any of my external drives. It starts of as normal but the progress bar stops half way and just never finish. Disk Utility does respond.
I tried different format options, repair and verify but none of the processes finish.
I went back to the install drive that I used to erase the internal drive before Lion install and it also didn’t want to finish.
I copied the old disk utility from Snow Leopard to my desktop, it opens with a warning, but gives the same outcome.
Any advice?

I'm having the same problem on my late 2010 Air with Lion installed over Snow Leopard.
I've tried several usb memory drives and several external harddrives...all the same problem with the progress bar getting stuck halfway. wether I select 'partition' or 'erase'.
the 'genius' at the mac store told me that he advises a clean install of Lion. I did...or I thought I did but all my files were still in place and the problem was still there. Guess I will have to wipe the drive first.
Also, unable to repair permissions on the MAC drive.
But it is remarkable how few people seem to experience this problem thus far. A google search hardly returns any results.

Compressor doesn't finish

I export a QT reference file like usual and then have Compressor convert it to whatever (FLV, Mp4, etc) and now it gets pretty much all the way done and just hangs there. It has been like this for about a month now.
The QT reference plays fine so no problem there.
It almost finishes and then doesn't advance and anymore and I cannot stop it. I have reset the background processes and that fixes the problem of canceling but no matter what format I try to convert to in Compressor it doesn't finish.
I can export directly from Final Cut Pro without a problem. The thing is I want to use Compressor...anyone know why this is?

Does clearing the associated QMaster cache help at all? To get there, type /var/spool/QMaster once you go to Go > Go to Folder in the Finder.
Or does this happen for only one particular QT reference movie? If that's the case, then Compressor/QMaster might simply not be fond the the referenced render or media files (what can I say, it's a cranky problem with poor social skills.) Sometimes, re-rendering the troublesome section(s) - or exporting self-contained - fixes those issues.

Wait activity doesn't finish

I have dployed a BPEL process with a Wait activity that must wait 30 seconds. But after the 30 seconds has passed, the wait activity doesn't finish. Can anyone say me what's the problem? Thank You!!

this is the error I have in my domain.log (it's in spanish but i will try to translate):
<2006-10-20 13:03:22,718> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Recovery still not possible after 550 attempts due to ORABPEL-11001
Directorio de entrada no válido.
El valor especificado para el parámetro de activación de directorio (Físico/Lógico) de entrada tiene un valor "/temp/" no válido.
Asegúrese de que se cumplen las siguientes condiciones para el directorio de entrada:
1) Existe y es un directorio (no es un archivo). y
2) Se puede leer (permisos de lectura de archivo). y
3) Si el parámetro de activación "DeleteFile" está definido en "true", el directorio también debe tener otorgados permisos de escritura. y
4) Si se utiliza un nombre lógico, asegúrese de que la correspondencia de nombre lógico<->directorio físico está especificada correctamente en el descriptor de despliegue.
<2006-10-20 13:03:22,718> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Recovery still not possible after 550 attempts due to ORABPEL-11001
The Input folder is not valid.
The specified value for the (phisycal/virtual) directory activation input parameter has a an invalid "/temp/" value.
How do I identify the process that is generating this problem? Because the process I deployed doesn't use file adapters but maybe it can be generated by one of the process called by the one I deployed and that I built previously using the "obant" comand.
Thanx!!

HT1386 Why do the songs I buy through iTunes never finish processing?

This has been very frustrating. If I purchase a song through iTunes on my phone, it never finishes processing. I've tried changing settings, turning it off and on again, and yet I can still see the songs available when I log into iTunes under "music I've purchase but is not on this phone." Any ideas on how I can get the songs to finish processing and available to play?
If I buy a song through iTunes and try to play it in iTunes, it doesn't work. If I buy a song through Amazon, it works fine. I would buy everything through Amazon except it doesn't have all the same songs.
All I want to do is listen to one song that I've paid for and it seems to be nearly impossible. Why is this so difficult?

I'm having this exact problem now with an iPhone 4 (not the 4S) and running software 6.1.3 with iTunes version 11.0.4.4. - The songs play fine in iTunes. In some instances I brought in the songs from CDs, in other instances I purchased from the iTunes store meaning I can't simply convert them. In either way they play silence on my iPhone around halfway through and for the remainder of the track.
I have attempted a full restore from a backup, and then reloaded all of my music, same songs, same problem. I don't feel a manual restore would help because that means reprogramming every single app, and the music would be reloaded the same way so what difference could that make?
Just to add insult to injury my protection plan ran out about 2 weeks ago and my phone otherwise works fine, so this can't possibly be worth purchasing another pricey plan just to be allowed to TALK to Apple.

Deep freeze's reboot frozen command doesn't finishes

Whenever i send a reboot frozen command from the ARD on the server, it doesn't finishes. The Reboot command is below.
osascript <<EndOfMyScript
tell application "System Events"
tell application process "loginwindow"
key code 125
delay .25
keystroke return
delay 1
keystroke "0000"
keystroke return
end tell
end tell
delay 4
EndOfMyScript
DFXPSWD="0000" /Library/Application\ Support/Faronics/Deep\ Freeze/deepfreeze -u "VantageAdmin" -p bootFrozen
reboot
This execute correctly but it seems like the ARD doesn't recognise that it is done, so it continue running untill manually cancel.
I mean it execute correctly but the command remains in the active task on ARD. What can i do to make this execute and disappear from the active task to history?

Well one option is to break it up into two tasks.
task 1, send unix commands (without the reboot at the end)
task 2, user ard reboot command
Another option would be to que up the command on the client.
send unti command as user root
launchctl load -w /System/Library/LaunchDaemons/com.apple.atrun.plist
echo "reboot" | at now+1
the catch is that queing up a command, is that you don't know if the command did sucesfully triggure.
I've never tried to use at with deep freeze, so it would be a good idea to test the results before mass deploying.
the other thing is it can create 'mail'.

How to execute a .exe file in java(Jsp) without using a process ???

Hi All ,
How to execute a .exe file in Jsp without using a process ??? ...
Is it Possiable ????

itsdhanasaraa wrote:
But as this a web application ... By using Runtime i'm getting some probs ..
Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
Ain't gonna happen.
its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
1) it's not "taking more time to execute", whatever that's supposed to mean.
2) there's no other way to execute something. Not that you should every use even that way anyway
3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

Parsing in Weblogic/jsp doesn't work; application-mode (command-line) works

Hello-
Parsing my XML file in Weblogic/jsp doesn't work, whereas it works
in application-mode... (albeit on two different machines)
Here are the parameters:
server1:
weblogic 6.0
win2k server
jre1.3
my personal machine:
***no weblogic***
win2k server
jre1.3
When I run my code as an application (command-line style) on my machine,
parsing in my xml file works fine, and I can do a root.toString() and it
dumps out the entire xml file, as desired.
However, running my code inside weblogic (on server1) in JSP, parsing in
my file and doing a root.toString() results in the following: [dmui: null]
(where dmui is my root)
(even though i'm running it on two different machines, i'm positive its the
same code (the servers share a mapped drive)...
So, I think its probably because I'm using a different parser, as
specified by weblogic? There are no exceptions being thrown. Here's my
(abbreviated) code, which is called either command line style or in a JSP:
// Imports
import org.w3c.dom.*;
import org.w3c.dom.Document;
import javax.xml.parsers.*;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
DocumentBuilderFactory docBuilderFactory =
DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
mDocument = docBuilder.parse (inFile);
myRoot.toString()
-END
Doing a System.getProperty("javax.xml.parsers.DocumentBuilderFactory")
results in:
server1 (weblogic/jsp):
"weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
my machine (application-mode):
null
Does anyone have any ideas about how to get this work? Do I try to set it
up so that they both use the same parser? Do I change the Weblogic parser?
If so, to what? And how?
Am I even close?
Any help would be appreciated..
Thanks, Clint
"[email protected]" <[email protected]> wrote in message
news:[email protected]...
No problem, glad you got it worked out :)
~Ryan U.
Jennifer wrote in message <[email protected]>...
I completely missed setting the property(:-o), foolish mistake. That wasit. Thanks.
"j.upton" <[email protected]> wrote:
Jennifer,
Personally I would get rid of import com.sun.xml.parser.* and use xerces
which comes with WLS 6.0 now, unless like I said earlier you have a need
to
use the sun parser :) Try something like this with your code --I've put
things to watch for as comments in the code.
import javax.xml.parsers.*;
import org.xml.sax.SAXException;
import org.w3c.dom.*;
import java.io.FileInputStream;
public class BasicDOM {
public BasicDOM (String xmlFile) {
try{
FileInputStream inStream;
Document document;
/*You must specify a parser for jaxp. You can in a simple view
think
of this as being analogous to a driver used by JDBC or JNDI. If you are
using this in the context of a servlet or JSP and have set an XML
registry
with the console this happens automatically. You can also invoke it in
the
context of an application on the command line using the -D switch. */
System.setProperty("javax.xml.parsers.DocumentBuilderFactory",
>>>
"weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl");
// create a document factory
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
// specify validating or non-validating parser
dbf.setValidating(true);
// obtain a factory
DocumentBuilder db = dbf.newDocumentBuilder();
// create a document from the factory
inStream = new FileInputStream(xmlFile);
document = db.parse(inStream);
}//try
catch (Exception e)
System.out.println("Unexpected exception reading document!"
+e);
System.exit (0);
}//catch
}//BasicDom
// Main Method
public static void main (String[] args) {
if (args.length < 1)
System.exit(1); file://or you can be more verbose
new BasicDOM(args[0]);
}//class
=============================================
That will give you a basic DOM you can manipulate and parse it fromthere.
BTW this code
compiled and ran on WLS 6.0 under Windows 2000.
Let me know if this helped or you still are having trouble.
~Ryan U.
"Jennifer" <[email protected]> wrote in message
news:[email protected]...
Actually I included com.sun.xml.parser.* as one last febble attempt toget
it working.
And as for source code, I included the code. If I just put that oneline
of code
in, including the imports, it fails giving me an error listed above inthe
subject
line. Here is the code again:
package examples.xml.http;
import javax.xml.parsers.*;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.w3c.dom.*;
import java.util.*;
import java.net.*;
import org.xml.sax.*;
import java.io.*;
public class BasicDOM {
static Document document;
public BasicDOM (String xmlFile) {
try {
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
} catch (FactoryConfigurationError e){
System.err.println(e.getException());
e.printStackTrace();
// Main Method
public static void main (String[] args) {
BasicDOM basicDOM = new BasicDOM (args[0]);

Hi, Rob
Does it work in WL9.2?
It seems I do it exactly as the explained at http://edocs.bea.com/wls/docs81/programming/classloading.html - and it fails :o(.
I try to run my app.ear with WL9.2 There are 2 components in it: webapp and mdb. The webapp/WEB-INF contains weblogic.xml:
<weblogic-web-app>
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
</weblogic-web-app>
Mdb is expected to run in the same mode, i.e. to prefer the webapp/WEB-INF/*.jar over the parent Weblogic classloader. To do so I add the weblogic-application.xml to the app.ear!/META-INF:
<weblogic-application>
<classloader-structure>
<module-ref>

<module-uri>webapp</module-uri>
</module-ref>
<classloader-structure>
<module-ref>
<module-uri>mdb.jar</module-uri>
</module-ref>
</classloader-structure>
</classloader-structure>
</weblogic-application>
Now, when classloader-structure specified, both webabb and mdb prefer the weblogic root loader as if prefer-web-inf-classes not defined at all.

ITunes 10.5 sync doesn't finish iPhone 4S 5.0.1

When syncing my iPhone 4S 16GB 5.0.1 with itunes 10.5 using a Macbook Pro 10.7.2 it freezes at the last step 7 of 7. I had the same problem with iOs 5.0 and the update didn't change a thing. iTunes is still accesible, but it doesn't finish the sync. All I can do is deconnect the iPhone in the Devices of iTunes, but it give a warning that it is still syncing. When I check the iPhone and iTunes, everything seems to be ok and purchases and apps are either downloaded on the iPhone or iTunes.On the iPhone there is still the little wheel turning to indicate the sync and in iTunes there is the same little wheel next to the iPhone in Devices. Any idea anybody??

I'm experiencing this problem for the first time - frustratingly, while upgrading to a "new" (hand-me-down) 32GB 4G - on OSX 10.6.8. This phone has the iOS 5.0.1 update installed, I'm trying to restore my old phone's data from backup. All the data appears to be there up to mid-October (from looking at text messages), but the sync wasn't finishing. I hit "cancel," and now the cancel isn't finishing. I'm gonna leave it overnight, but I'm not expecting it to finish.

JSP Doesn't work on Apache

I installed Oracle Portal Early Adoptor edition to Windows 2000. I noticed that the Oracle HTTP server has Apache/Jserv. The servlet sample works, however the JSP doesn't work. There aren't any documentation about JSP. Do I have to install a 3rd party JSP web server such as JRUN to run JSP? Thanks.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sir Gawin:
I installed Oracle Portal Early Adoptor edition to Windows 2000. I noticed that the Oracle HTTP server has Apache/Jserv. The servlet sample works, however the JSP doesn't work. There aren't any documentation about JSP. Do I have to install a 3rd party JSP web server such as JRUN to run JSP? Thanks.<HR></BLOCKQUOTE>
I would also be interested in this answer.I had test site running on a win2000 server with Apache/Jserv until I installed WebDB. Now I can connect via a web browser to the default WebDB site but the Apache HTTP sevices refuse to start up giving an error message 1069( or something like that). WebDB is configired to a different port( not 80)than Apache http
null

Battery doesn't finish

i reported a problem earlier in a previous post about my defective battery, as i said, it used to drain by itself after shutting down, and it only lasts maybe 45mins max.
Well, the problem now is the battery doesn't seem to finish, i've been using it for days now, and it stays 100%. Nothing much happened since my previous problem, except, i dropped the laptop once when it was in its protective bag, and the case got dented a little bit in the corner, the other thing is i travelled to a very cold country.
I am not upset that the battery doesn't finish, but why doesn't everything have to be weird, it either drains, or doesn't finish, can we like find a medium?

Go to an Apple Store and ask to have your battery tested.

SCCM 2012 -OS images not transfering to DP ERROR Detail will be available when server finishes processing the message

I am having issue with some application, packages, and images pushing from my Primary SCCM server to the secondary servers and DPs.
I am thinking that the issues are all related so I am going to just talk about the image that I am having a problem with push.
The image has successfully transfered to the Primary site, and secondary sites, but it is having a problem with a DP. The error that shows up in "Content Status" says "Detail will be available when server finishes processing the
messages". All the servers are 2008 R2 server, with SCCM 2012 SP1.
I would take a look at logs for this, but I am pretty new to SCCM, and I'm not sure which log to look at for additional information.
Thank you for any help that can be provided.

The logs pointed me to an error about the Pull DP settings. I think the issue is that I have the images stored on the Primary site, and the DP does not have the Primary site in its Pull DP settings tab. I unchecked the option, and it appears to be working
now. Thank you

Hp5530 doesn't finish print job

I have two computers, a win7 laptop and a win8.1 desktop. My 5530 is set up as a wifi printer and is next to my Linksys wireless router. Both printers wil print to the printer but often the print job doesn't finish - stopping in the middle of a page. The problem seems to be evolving in that for a few months the problem only showed up when printing from the win 8.1 computer. Now it happens with both computers, more and more often. I've reinstalled the drivers on both computers with no change in outcome. Please help.

Hello domeguy,
Welcome to the HP Forums.
I see that you are having some issues with the Wireless connection.
I do have a few suggestions that we can try in the attempt to resolve this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you have the router more than 4' from the printer and less than 20'. This will be the range that you need to have the printer from the router to ensure a solid connection. If the Printer less than 4' from the router and will not be detected.
I have another suggestion. Try the HP Print and Scan Doctor on both computers. Let me know if you see any error codes or messages.
The last link I have for you deals with when the Printer Does Not Maintain Wireless Connection.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error finishing process 'IUMI'

Hi Guys,
trying to save a new utilities service contract in the ICWC we get the error message " Error finishing process 'IUMI' ". After spending lot's of time with debugging the process classes we didn't find the error causing code line.
Does anybody know a log file or a process trace or another chance to find the gist of the matter?
Cheers Thomas

Hi ,
Are you using a standard process class or a custom process class ? We are upgrading from CRM 5 to CRM 7 EHp3 as well and can check the process config .
Regards
Anirban

Photocast doesn't finish uploading

I have a photocast that is a smart album. The first time I publish it, everything goes well. When I try to update the album, it goes through everything until the progress circle is almost finished, and then it doesn't finish.
I've looked to see if it is still uploading anything, but there is no upload activity on my computer at that point. My current solution is to unpublish and republish the photocast each time, but I'd rather find a better solution.
Has anyone else had this problem? Is it because it is a smart album?
Sky

That memory should suffice indeed.
If you are lucky, the print products store can still print your original book from the copy on their server. they keep the uploaded file for reference for a month or so.
You have screened all pages of the book, if there are no photos missing? And you have reentered your billing information, not just checked it?
The system status for the print Products is shown as o.k. at http://www.apple.com/support/systemstatus/
Check, if you accidentally have turned on restrictions in the settings:
Settings>General>Restrictions
Check the region settings for the iPad, if the country is set to the country of the delivery address for the book.
Trouble shoot the iPad:
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

JSP doesn't finish processing

Similar Messages

Maybe you are looking for