JSpinner with SpinnerDateModel - how to set a different Locale?

I wonder, how I can get my JSpinner to display dates in some different Locale.
I tried UIManager.getDefaults().setDefaultLocale(...) and spinner.setLocale(...) and ((JSpinner.DateEditor)spinner.getEditor()).setLocale(...) and ((JSpinner.DateEditor)spinner.getEditor()).getTextField.setLocale(...) but without any effect.
??? "Lost in Swing" ???

     * Set the same DateEditor properties
     * for each spinner.
     * @param dateEditor
     * @param pattern
     public void setFormattedDateEditorTextField(JSpinner.DateEditor dateEditor, String pattern) {
          JFormattedTextField jFormattedTextField = dateEditor.getTextField();
     jFormattedTextField.setEditable(false);
          jFormattedTextField.setPreferredSize(new Dimension(130, 15));
          jFormattedTextField.setHorizontalAlignment(JFormattedTextField.RIGHT);
          //setFontSyleProperties((Component)jFormattedTextField);
          jFormattedTextField.setLocale(getSpecifiedLocale());
          DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, getSpecifiedLocale());
          ((SimpleDateFormat)dateFormat).applyPattern(pattern);
          ((DateFormatter)jFormattedTextField.getFormatter()).setFormat(dateFormat);
          jFormattedTextField.getFormatterFactory().getFormatter(jFormattedTextField).install(jFormattedTextField);
     }

Similar Messages

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How to set two different welcome-file to different servlets in web.xml

Hi friends,
Can some one help with web.xml file
I have to different servlets in applications.
I want to set two different welcome files for my two different
servlets in web.xml
Please, can some one give me sample code to achieve this.
Here web.xml code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <servlet>
          <servlet-name>reports</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrReportsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>reports</servlet-name>
          <url-pattern>/reports</url-pattern>
     </servlet-mapping>
     <session-config>
          <session-timeout>30</session-timeout>
     </session-config>
     <welcome-file-list>
          <welcome-file>reportsindex.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>calldetails</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrCallDetailsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>calldetails</servlet-name>
          <url-pattern>/calldetails</url-pattern>
     </servlet-mapping>
<welcome-file-list>
          <welcome-file>calldetailsindex.jsp</welcome-file>
     </welcome-file-list>
</web-app>
I need this fix immediately. Your help will be really appreciated. Thanks in advance.

First of all, my understanding is that you need to have a Servlet 2.4 complaint server to do this...Given that, you're supposed to be able to simply specify the Name of the servlet as the welcome-file to get it to work. For example:
Your servlet section:
<servlet>
<servlet-name>Controller</servlet-name>
<servlet-class>com.company.ControllerServlet</servlet-class>
</servlet>Now you would add the following to your welcome file list:
<welcome-file-list>
<welcome-file>Controller</welcome-file>
</welcome-file-list>Note that you use the servlet-name value from the servlet definition, NOT the url-mapping from the servlet-mapping section.
Please note that I cannot verify this as I am running a 2.3 server at home. When I get to work Friday I can test on a 2.4 machine. However this shouldn't take you more than a minute to test.
Note that I did try this on the 2.3 compliant server and it did NOT work (as I expected)...
HTH.

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How to set a different default font

Is there a way to set a different font other that Myriad Pro as the default font so that you don't have to continually reset it for every field or label???

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

How to set up a local testing server with local-only access

Hi folks,
I've reached the point where I need to do some simple server-side scripting in my Dreamweaver work. I work remotely pretty often, so I want to be able to preview my work without having to go back and forth to the production server. It seems to me the solution would be to install a little web server on my laptop, BUT I'm concerned about security. Is there any way I can set up a local webhost but not make it accessible to the outside world?
I'm really pretty clueless about this stuff, so I'd appreciate any advice. Thanks!
-Kim

I would recommend using XAMPP Lite. It's very lightweight and portable when installed on a USB drive or flash stick.
http://www.howtogeek.com/howto/14998/
Nancy O.

How to set up different realms for each server ?

I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?

Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)?

Publishing with TCS3 - how to set the default topic?

Hi all,
I am having a problem with the new Publishing function of FM10/TCS3. Here is how I proceed:
1. Create a RoboHelp project.
2. Create a link to the FrameMaker book and update (the link properties are set to generate a TOC).
3. Tweak the import settings until layout fits.
4. Select the generated TOC in the SSL and set the title page as default topic.
5. Generate HTML help output and test.
6. When all is fine, export isf file and close Robohelp.
Now the idea would be that I can edit the book using Framemaker and generate HTML Help output without using Robohelp:
1. Open Book in Framemaker and edit. I also need to edit the title page.
2. Select File > Publish.
3. Select the Robohelp projekt and isf file.
4. Generate HTML Help.
Result. Everthing works fine, except for the title page - the online help still displays the default topic at the state is had in the Robohelp project, before I edited the Framemaker file. When I select the title page manualy from the TOC, then the correct updated page is displayed. That means that both versions are contained in the CHM and the correct version is linked to the TOC, but the wrong version is set as default topic.
Any solution to this? Otherwise I might file a bug report.

Can you please elaborate the para below
Everything works fine, except for the title page - the online help still displays the default topic at the state is had in the RoboHelp project, before I edited the FrameMaker file. When I select the title page manually from the TOC, then the correct updated page is displayed. That means that both versions are contained in the CHM and the correct version is linked to the TOC, but the wrong version is set as default topic.
do you mean to say that you selected a different topic as default in the RoboHelp project and later while File Publish you changed the default topics - the question is from where did you do it (in RoboHelp project?) and this selecting from TOC is not clear (as default topic selection combo in SSL does not shows TOC but all the topics present).
Secondly Did you used the same FM file set to create .isf from RoboHelp project that was used later for File Publish option or did you created a downsample of you FM file set in the RoboHelp project.
One of the things I would suggest is that if you are that proficient with RoboHelp (the way you linked and did mapping and all) then why go to FrameMaker to Publish, as you can create the same output right there sitting the RoboHelp project (while you are creating the .isf - mapping that you require). It will give you more flexibility with respect to the output generation like applying a different CSS to all the topics before generating output
one last explanation what seems to have happened in your case is that you selected a different topics (topics generated from the linked FM in RoboHelp project) and while publish the files used for output is the one generated through import of the FM book in the RoboHelp project (which is a different set of files) and thus the outputs default topics would be the one generated from your linked FM document (the one that you selected while creating the .isf file)
If you use linked FM documents and generate online outputs from RoboHelp you would have a better control over these online outputs and for PDF you can always generate it from FrameMaker
Hope this will help
Ashish

With Drummer - how do I arrange different rhythms to match the different phases of my song?

Essentially I want to to be able to have different drum phrases for intro, fill, verse, chorus, etc.
Whilst I understand how to create these phrases one at the time with drummer, I am not sure how to arrange them together, one afte the other, to form a complete arrangement for a given song? Example: Using Kyle, I want hime to start the song with a simple intro with the kick, then start adding some snare, then go into a fill with the toms and then return to a normal rhythm before ending with just cymbals... How do I programme that?
I thought I could do that by using various tracks of the same drumemer, but Garageband is telling me that I have already chosen a drumemr and I cannot have another drummer track. I want to avoid dragging loops in, becasue they would have a differnet sound / feel to the drummer type I've chosen and would make the project sound unorganic.
Any help on this would be appreciated
Thanks

You can have only one drummer track, but the regions in the track can have different settings.
When you ctrl-click inside the drum track it will add a new region with eight bars.
For each region you can change the parameters in the track editor:
drag the yellow dot around between soft and loud, or simple and complex.
Or select a different preset in the left column.

How to set a different SUSP character? (job control)

Stopping the foreground job associated with a terminal can be done by typing 'C-z', which is the default special character for suspending or resuming it (using the 'SIGSTOP' signal).
Documentation says:
The functions, data structures, and symbolic constants are all declared in the header file 'termios.h'.
and
17.4.1 Terminal Mode Data Type wrote:The entire collection of attributes of a terminal is stored in a structure of type 'struct termios'. This structure is used with the functions 'tcgetattr' and 'tcsetattr' to read and set the attributes. '
I would like to remap that key but I don't know exactly how to store my new character into TERMIOS.c_cc[VSUSP]. I have no programming background. In various Perl modules I found setcflag() calls:
# (source)
# put current values into Termios structure
$self->{TERMIOS}->setcflag($self->{"C_CFLAG"});
Could someone please guide me to a simplified script I can call in .bashrc? is something like this correct?
$termios->tcsetattr( $hotkey | &POSIX::VSUSP );
I also found this in the ActivePython Docs:
termios.tcgetattr(fd)
Return a list containing the tty attributes for file descriptor fd, as follows: [iflag, oflag, cflag, lflag, ispeed, ospeed, cc] where cc is a list of the tty special characters (each a string of length 1, except the items with indices VMIN and VTIME, which are integers when these fields are defined). The interpretation of the flags and the speeds as well as the indexing in the cc array must be done using the symbolic constants defined in the termios module.
termios.tcsetattr(fd, when, attributes)
Set the tty attributes for file descriptor fd from the attributes, which is a list like the one returned by tcgetattr(). The when argument determines when the attributes are changed: TCSANOW to change immediately, TCSADRAIN to change after transmitting all queued output, or TCSAFLUSH to change after transmitting all queued output and discarding all queued input.
POSIX Standard: 7.1-2 General Terminal Interface, Kernel: 3.18.4-1-ARCH
Last edited by sharethewisdom (2015-02-17 11:07:25)

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

How to set two different logon pages for a portal

Hi experts,
I have 2 different URLs for the same portal.
i am trying to set up 2 different logon pages for these two.
How to achieve this . Could u please tell me which files i have to change inside the logon par .
Thanks in advance,
John

John,
Please check this threads,
Logon Page Customization Based on URL
Two Urls for the same portal server
Ram

How to set a different parser for JAXB ?

from the FAQ https://jaxb.dev.java.net/faq/index.html
A question about which jars are required says
"The runtime also needs a JAXP-compliant parser. If your target environment is
JRE 1.4 or higher , it is a part of JRE, so you don't need any more jar file.
Otherwise you have to bundle a parser, too. Any parser would do the job, but we
recommend the JAXP RI bundled in the JWSDP (which is what we test against.) "
I am running jdk1.3 and want to use a different parser how do I specify it.
Thanks
Steve

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How to set up2 different phones to 1 itunes

how can i set up 2 different iphones to 1 itunes?

Plug them in, select them in iTunes and select the tabs across top and select what you want to sync to each iPhone.

JSpinner with SpinnerDateModel - how to set a different Locale?

Similar Messages

Maybe you are looking for