Jtable in cell how to single mouse click make the cell selected.

it seems need double click make cell selected.
thanks!!!

Hi,
these link will help you.
It has code for both examples, with 1 click and with 2 clicks:
http://forum.java.sun.com/thread.jsp?forum=57&thread=362073&tstart=0&trange=15
sergio.

Similar Messages

Detecting mouse clicks in editable cell of JTable

Hi everyone :)
I thought that this question might have been asked before, but I have searched the forums extensively and have not been able to find the solution.
What I want to achieve is to detect single and double mouse clicks on JTable cells (that are editable).
For example, I have a JTable and there exists within it an editable cell. If the user clicks on it once then that cell goes into edit mode, and the user can type directly into the cell. I have already successfully implemented this.
However, what I also want to do is detect a double-click so that I can pop up a dilaog that shows a list of default values that the user can select.
So here is what I want;
1. User clicks on the cell once.
2. Cell moves into edit mode.
3. If the user clicks again within a certain time interval then cancel edit mode and pop up a dialog containing values that the user can select from.
I think that to do this I need to be able to detect mouse clicks on the cell that is currently being edited. So far I have been unable to discover how this is done. I have even tried extending JTextField to get what I want, but with no luck.
Any help would be greatly appreciated.
Kind regards,
Ben Deany

Thanks for the reply.
Unfortunately, it is not possible to call 'AddMouseListener()' on a cell editor. You are only able to call 'addCellEditorListener()' and that only allows two events to the broadcast (edit cancel, and edit stop).
Ben

Unable to edit cells in JTable on single click of the cell.

Hi,
I am unable to edit a cell in JTable on single click of the cell. If I double click on the cell, I am able to edit it. Please help me.
Thanks
Subbu

Thanks for all replies. Now, i am able to edit the cell on single click.

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

When I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V works. How can I solve this

when I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V works. How can I solve this

YAY! That did it.
Thank you so much.
And a Very Happy and Prosperous New Year to you!
bonnie

Two JDialogs are getting open on single mouse click in MAC

Hi ;
I have a button,which opens a Jdialog on single mouse click,but if i do clicking multiple times,then multiple Jdialog are getting opened this issue is occuring in MAC only and not in windows.I have used all the methods of mouse event listener but there is no impact seen all,please give me some idea on this...

To get better help sooner, post a SSCCE that clearly demonstrates your problem.
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

How do I right click using the mouse on the mac desktop ?

how do i right click using the mouse on the mac desktop

does this involve iPhoto for the Mac in any way?
the simple answer given no actual information is to press down on the right mouse button
LN

How to detect mouse clicks on desktop?

Hi All,
I need to detect mouse clicks on the desktop and find out mouse position on the screen. How to listen to mouse events if I don't have any swing components like containers, panels, windows, etc? All things like "addMouseListener" are supposed to be with such components. But my program is running in the background and it doesn't have any graphical interfaces. So, I need to detect if a mouse button is pressed at any position on the screen.
Thanks for any help!

Why? What program feature do you intend to offer, by knowing what a user clicks on (besides the application itself).Hi, well what I have to do is to start the application minimized in the system tray. Then the application must be listening for crtl+shift+left click in any part of the desktop or an opened application, when that happens, I have to show a window asking if the user want to take a screenshot starting in the x,y point he clicked, once done, I have to take an screenshot...so on.
How can I do that? Can anybody give me a hint? Thanks in advance.

How to handle mouse click event on up-arrow of JSpinner?

Hi Everybody,
I have a JSpinner component holding a date field in it (dd/mm/yyyy). I have handeled keyboard up and down arrow key events for the component and that's working as expected. Now I want to make it work for mouse clicks on the up (UP_ARROW_SUBCOMPONENT) and down arrow (DOWN_ARROW_SUBCOMPONENT) buttons of the component.
Could somebody guide me how to do it? My investigatoin hints me to use JSpinnerMouseEventData but I am not exactly getting how to get it done.
Thanks in advance!

if you just want to add a mouseListener to the spinner's buttons, try this
(only coded it for the up/next button)
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Testing
public void buildGUI()
    JSpinner spinner = new JSpinner(new SpinnerNumberModel(50, 0, 100, 5));
    spinner.setUI(new javax.swing.plaf.basic.BasicSpinnerUI(){
      protected Component createNextButton()
        Component c = super.createNextButton();
        c.addMouseListener(new MouseAdapter(){
          public void mousePressed(MouseEvent me){
            System.out.println("mousie, going up");
        return c;
    JFrame f = new JFrame();
    f.getContentPane().add(spinner);
    f.pack();
    f.setLocationRelativeTo(null);
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.setVisible(true);
public static void main(String[] args)
    SwingUtilities.invokeLater(new Runnable(){
      public void run(){
        new Testing().buildGUI();
}

How the do I make the cells deeper or taller

How do I make the cells deeper or taller in numbers?

Click and hold on the vertical or horizontal lines the separate cells in the row or column headers after the cursor changes to a bar with a double ended arrow:
use the row headers to change the height of a cell and the column headers to change the width of a column.
You can also adjust the width and height of a cell by using the cells inspector by selecting the menu item "View > Show Inspector", then clicking the cell inspector.:
You can also get this an other valuable information from Users' Guide which you can download for free:
http://support.apple.com/manuals/#iwork
See Chapter 3, page 49

Is it possible and if so how can I right click on the on screen touch keyboard

Is it possible and if so how can I right click on the on screen touch keyboard.

No it not design for that. I just tried it. Left click only. I recomend that you do not mess with setting with in the software it self you may end up causing the keyboard to malfunction and crashing your computer.I all so just double check our computers help and support On screen keyboard settings. There was no option given for switching the mouse clicker. Just sticky keys and short cuts are listed. Sorry I hope this answered your question. I would all so not recomend trying to install other software you may find on switching key board setting unless it came from HP company design especially use on these types of computers. You may end up destroying your hard drive and computer all together.

How can I center it in the cell (above big sub-table)

The "Cross Browser marquee II" at
http://www.pafoscarhire.com/index.php
how can I center it in the cell (above big sub-table) ?
I try but layer goes to the center of page rather than center
of cell , well ?

Heh - can't imagine what that's about....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Walt F. Schaefer" <[email protected]> wrote in
message
news:f53j7t$asj$[email protected]..
>I got the same error Murray. And, I might add it was not
centered. ;-)
>
> --
>
> Walt
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:f53itb$adt$[email protected]..
>> Internal Server Error
>> The server encountered an internal error or
misconfiguration and was
>> unable to complete your request.
>> Please contact the server administrator,
[email protected] and
>> inform them of the time the error occurred, and
anything you might have
>> done that may have caused the error.
>>
>> More information about this error may be available
in the server error
>> log.
>>
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "123polis123" <[email protected]>
wrote in message
>> news:f539js$9d$[email protected]..
>>> The "Cross Browser marquee II" at
http://www.pafoscarhire.com/index.php
>>> how can
>>> I center it in the cell (above big sub-table) ?
>>> I try but layer goes to the center of page
rather than center of cell ,
>>> well ?
>>>
>>>
>>
>>
>
>

EPM Formatting Sheet Issue - Right click on the cell and lock the cell

Dear Experts,
I have come across an issue. Earlier I worked on BPC NW 10 integrated with Ms Excel 2007. I applied a feature of locking the cell linked with specific member in Input Template and Report by going to EPM Formatting Sheet, selecting dimension member (Which I want to lock in Input Sheet and Report), right clicking on the cell under Data Column and selecting the option "Lock the Cell". As I protect my Input sheet and Report, and do refresh, the cell linked with specific dimension member get locked. Hope everyone has used this feature.
Now I have Ms Excel 2013 installed in system. I am not able to find this feature. if anyone has tried this feature in BPC NW 10 with Ms Excel 2013. Please help me out. As this was good feature by BPC.
Regards,
David

Hi Andy,
I am using Excel 2013, When I checked, I did not find "Lock Option". When I was using Excel 2007, then I had this locking option. below are the details that you asked for...
When I right click on cell in EPM formatting sheet, I get options as shown below in screen shot, but there is no "Lock Option"
Regards,
David

I just downloaded (updated) Firefox to V 20.0.1 now the "search" does not work, either via the mouse click or the enter key. Windows XP.

Updated to latest version, V 20.0.1 Now when on the home page the "search" does not function with mouse click or the enter key. Currently running XP Service pack 3. I also have the same problem (after same firefox update at home with my HP laptop running Windows 7.

You can check if you still have the XML files of the default search engines including Google in the searchplugins folder in Firefox program folder.<br />
If not then you need to reinstall Firefox.
Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
Try to delete the search.json file and a possible search.sqlite file in the Firefox profile folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the search.json file from the default search engines in the searchplugins folder in the Firefox program folder and the searchplugins folder in the Firefox profile folder.
Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 20.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I click on the "quick selection tool" and try to select something, it just "draws a line"

When I click on the "quick selection tool" in Photoshop CS5, and try to select something, it just "draws a line" as if the diameter were very thin and it dones't select anything.
Thanks.

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Jtable in cell how to single mouse click make the cell selected.

Similar Messages

Maybe you are looking for