JtextField text too long problem

I have a little problem, I'm sure its very very simple to fix. The text I put into my JTextField is longer than the visible portion, so when I put text in there it keeps scrolling it to the end, so the start portion of the text isnt visible anymore (it scrolls it to the end instead). Now obviously I would rather want the beginning portion of the text to show, but I havent found a way to do that nicely (there must be some simple setting/function for this). And I dont want to crop the text either...
Thanks :)

Use a JTextArea and call setCaretPosition(0) method on it.

Similar Messages

Exclamation mark says text too long...but it's not

My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
When I print the book on my color printer, all the text appears just fine.
So here's question 1: If I try to send a book with text warnings, will Apple reject the file until I have made the warnings go away?
And question 2: If the captions print just fine on my printer, are they likely to print just fine at Apple?
Many thanks!

When you order the book, a PDF will be created. That PDF is what gets uploaded to Apple (via Kodak) for printing. So the best way to check your book before ordering is to create a PDF, then inspect it. Chances are, what you see in your PDF is what you will get printed.
To do this, select your book and do File > Print. You'll get an "Assembling book" progress bar. That can take several minutes. When done, you get the Print Dialog box. Click the PDF button and choose "Save as PDF..." Choose a name and location for the file (the Desktop is convenient) and Save. Then switch to the Finder and open that PDF in Preview.
While I have not observed (or even tried to observe) for myself, I have read here from others that the PDF created this way may differ slightly from the one created by selecting Preview in the first Print dialog, and that it will more closely predict the final ordered book.
My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
I have that warning on one of my text boxes, too. It looks fine in iPhoto, fine in the PDF, and printed fine when I ordered the book from Apple.
Regards.

Legend item text too long

Hello.
Question to Flex guru:
I have too long text in Legend for chart. How can I do line
folding or how can I show toolTip for legend item (like for a Label
object)?
How can I initialize Legend object with array of LegendItem
objects?
Sorry for my english :)
Thanks in advance.

Im not sure what your asking exaclty as my english is bad
too, however i know that the label will only show one line of text,
for wordwrap or multiple lines i think you need to use the "Text"
control.

Workbook Precalculation: "Message text too long:

Good day
I have setup the precalculation server/services and all is well except for the size of some workbooks. I receive the following message:
u201CThe message could not be delivered to recipient because the message
text was too long. The node used supports messages up to a a length of
20,000,000 bytes. The message text is, however, 43,152,918 bytes long.u201D
I have deleted the results from the workbook before precalculation and the file is zipped for email.
Where in BW will basis have to increase the size when a workbook is precalculated and mailed?
Thanks in advance.
Cj

Hi,
Please refer this link for the same -
Re: error Entry is too long is displayed for the text edit
Regards,
Lekha.

APEX 3.1.2 spellcheck URI Too Long Problem

Hello,
My customer is using the APEX 3.1.2 spell checking functionality. It seem like there is a limitation with the size for the textarea for spell checking and we get a "URI Too Long" error when the size is larger than 1840 for IE and 7900 for Firefox. When I look at the Apache access log it shows that there is a call to the /apex/wwv_spelling.correction_frame?p_text=… , where the p_text is the content of my textarea. There is a limit on the LimitRequestLine 8190 bytes on the Apache server. My customer wants to have spell checking for a clob column. Is there a plan fix for this or what do you recommend?
Thanks,
SLH

I need an answer. Can anyone please help?

Tree component display problem when text too long???

hi all
whenever i use a tree component to display some sort of text, i run into problems when the width of the text being display for a node is larger than the width of the tree component.
Given: Tree tree1 with Node node1 and Child Node child1
When the text of either node1 or child1 is longer than the width of tree1, the text is displayed on its own single line UNDERNEATH the node images. this makes the text look like it does not belong to the group of children of a given node.
is there anyway to add maybe a text area or some sort of scrolling region to allow for any length of text for any node??
thanks everyone!

Yes, you can change the size of the tree node text field. Please see the "Tree Node Component Properties Window" section in the Help Contents within the IDE. Look at the info under the "Appearance" section.

Photoshop CS4 : Printer name too long problem

hi,
we have a special problem only in Photoshop CS4 when we want to print here.
When students wants to print their document on one of our printer, Photoshop is not keeping the printer selected correctly.
When we go in File --> Print...
The page "Imprimer" open and I select the printer : RN-CORRIDOR-D306-COULEUR(PS)
the (PS) is for the PostScript Driver.
then if we click on "Mise en page" (Page Setup) you see the name of the printer is now : RN-CORRIDOR-D306-COULEUR
this printer is the one with PCL driver.
I have these 2 printers installed on my computer. If I remove the PCL one, everything works correctly.
I have made some testing and I found that if the printer has more thant 30 character for the name identical with another one, it will switch to the printer above in the list in photoshop.
the name of these printers are in fact : \\sprint1\RN-CORRIDOR-D306-COULEUR and \\sprint1\RN-CORRIDOR-D306-COULEUR(PS)
and they appear like this in the listing :
\\sprint1\RN-CORRIDOR-D306-COULEUR
\\sprint1\RN-CORRIDOR-D306-COULEUR(PS)
So if I choose the PCL one, everything works fine, but if I choose the PostScript one, it will switch on the PCL driver. (it is impossible to print on the PS)
Another test I made :
Create 2 printer locally on my computer with 2 names with 30 character identical and 1 different at the end, 2 completely different driver (HP 4050PCL and Lexmark OptraS1650PCL) on 2 different ports: same results, it swith to the first printer in the listing.
As I said, this is the only application that have this problem. Any other Adobe application or MS Office is working for now 3 years with these printers with more than 30 character in the name. And we can't change the name as they are installed on over 100 computers.
Did someone ever saw this ?
Thanks
Benoit

these printer are installed on our lab computer with more than 100 softwares installed.
the only application having this problem is Photoshop CS4.
Illustrator CS4 for exemple is correct, last version of Acrobat Pro too.
Photoshop CS3 was ok before...

Client-error-request-value-too-long

What is this error???? I am trying to add an Epson 1280 printer and I get this error. I have the most current driver and not sure why this isn't working.

My flatmate had this "client-error-request-value-too-long" problem with her (powerpc) powerbook. Nearly everything I tried didn't work:
1) Reinstalling drivers
2) Permissions repair
3) Resetting print system using Fixamac's Printer Setup Repair Utility
4) Updating from 10.4.10 to 10.4.11
5) Using the command line to try and recreate the directory: /var/spool/cups/tmp (which told me it already existed)
6) Using Transmit (with show invisible files turned on) to browse to /var/spool/cups/ and try and recreate the tmp folder
On the last point I couldn't change anything about the /var/spool/cups/ directory because the permissions were corrupted in some way. It keep telling me tmp already existed but I couldn't see it.
In the end what did work was enabling and logging in as root, browsing to /var/spool/ using Transmit and deleting the cups folder and then recreating. It took a few tries to delete too, but in the end I managed to remove it.
Of course I wouldn't actually recommend this. I'm no Unix geek so god knows what I might have broken in the process, so I'm going to reinstall her system with the Archive and Install options when I get a chance, which is what I'd recommend doing in the first place to anyone having this problem.

Custom Webdynpro text field is taking too long to accept input values

Dear All,
I hvae created custom web dynpro for PO header fields in SRM. This WD contains a lot of fields. When i try to put cursor on a text field it is taking too long for the cursor to appear in that input text field. There is no problem with other fields which have search helps associated with them. This field with the problem is just a text field.
Please help.
thanks.

Dear All,
I hvae created custom web dynpro for PO header fields in SRM. This WD contains a lot of fields. When i try to put cursor on a text field it is taking too long for the cursor to appear in that input text field. There is no problem with other fields which have search helps associated with them. This field with the problem is just a text field.
Please help.
thanks.

Insert an hyperlink in a mail text but the URL is too long (more than 255)

Hi to all,
I was asked to insert an hyperlink in a mail text. I was thinking to use '<A href =" ' command . I'm usin BSC interface but my problem is that the internal table in wich I'm loading the body message is 255 character while the URL i'm trying to include in the e-mail si too long . Any fast solution ?
Thanks
Andrew

You don't need to put the entire anchor tag contents on one line in the table before you append it to the body contents. The reading application (Outlook, etc.) knows the entire tag contents based on the open/close of the tag. I often chunk up my anchor tags like that via text elements so they're easier to read in the code. Though you can't really see it, this is an anchor tag:
begin_table 0.
begin_row.
begin_cell 100.
gs_email_contents-line = text-s03.
append_content.
gs_email_contents-line = text-s04.
append_content.
gs_email_contents-line = text-s05.
append_content.
end_cell.
end_row.
end_table.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

ICal stopped because of too long reminder text

I have copied a text into iCal as reminder, but apperently this text looks too long and therefore every time I start up iCal on my Mac it kind of crashes.
I can see my calendar but not add or change anything.
Does anyone have the same experience and can anyone tell me how to solve this issue.
iCal still works both on my iPad and iPhone without any issues, but on my Mac is crashes instantly when I start it up.

I solved the issue myself by removing 'reminders' via my iPhone, update iCloud, and voila iCal works again on my Mac :-)

Ring Item text string too long to display all - use ellipses ?

The width of my Ring control is not wide enough to display all characters in the Item text string. LabVIEW simply truncates the text with no indication that additional text is present. Is there a way to display an ellipses in such cases ? For example :
"Ring text string that is too long"
that is now shown as :
"Ring text string that i"
could be shown as :
"Ring text st...too long"

A couple of suggestions:
1.) Use property nodes to determine which strings are too long, then concatenate the strings with ellipses.
2.) Increase the height so the text wraps.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Text information being displayed too long.

Hi, I have a database table containing text information. I
want to displayt this information on a webpage but when I try to do
so the text doesnt break as soon as i want it to, so it looks
something like this:
the inforamtion from my database is being displayed way too
long. I want
it to break sooner.
instead of how i want it to be shown, like this:
the information from my database
is being displayed way too long I
want it to break sooner.
if anyone could help me with this I would really appreciate
it. Thanks.

...And since we're not in the early 90's anymore, we kindly
forget tables when it comes to representing any data that is not
in... errr... a table :-)
<style type="text/css">
.properwidth {width:300px}
</style>
<div class="properwidth">
#longtext#
</div>

JtextField text too long problem

Similar Messages

Maybe you are looking for