JTree selection not visible
The selected note in the JTree will not be displayed (highlighning)....why ? The node is selected...
TreePath tpath = mainFrame.getTreeApplications().getSelectionModel().getSelectionPath();
mainFrame.getTreeApplications().clearSelection();
mainFrame.getTreeApplications().updateUI();
mainFrame.getTreeApplications().getSelectionModel().setSelectionPath(tpath);
http://www.physci.org/codes/sscce.jsp
Similar Messages
-
I've been editing pictures all day. For some reason, I can't get the magnetic lasso or any other selection tool to draw the marching ant line around the selection. I've not changed anything. I've made sure I have the actual picture selected, tried different layers, etc.
Any ideas why the selection tool suddenly would quit showing the area I'm selecting?
Thanksone other thing just changed also. I can't go under the filter menu and select the "kodak" plug in I've been using for a long time. Any idea what I might have changed to disable a plug in and cause selection/marque to no longer be visible?
Thanks -
Spot removal tool target area selection not visible
When using the LR5 spot removal tool I can perform cloning or healing and LR automatically selects the target used to clone from, but I cannot see where this area is on the image. A pin should appear with a line connecting the area to be removed and the target area used to clone from. I see no pin. Is this controled by a setting?
JackGreat, that works. Keep on learning.
thanks -
JTree not visible when compiled
I have a problem that my JTree is not visible when i export my project to jar file.
along with a button also. I have no idea why this may be happening so maybe some of you guys have heard of this before ?
the JTree is visible when running in Eclipse etc
any ideas?JTrees shouldn't be visible when you compile, they should be visible when you run the application :)
-
JTree - dashed lines and + and - icons not visible
Hi,
I implemented a TreeCellRenderer for my JTree:
public java.awt.Component getTreeCellRendererComponent(javax.swing.JTree tree, Object value, boolean sel, boolean expanded, boolean leaf, int row, boolean hasFocus)
Object userObject = ((DefaultMutableTreeNode)value).getUserObject();
if (userObject instanceof Struct)
this.setLeafIcon(this.iconStructClosed);
this.setClosedIcon(this.iconStructClosed);
this.setOpenIcon(this.iconStructOpen);
else if (((DefaultMutableTreeNode)value).isRoot())
this.setLeafIcon(iconEmptyClosed);
this.setClosedIcon(iconEmptyClosed);
this.setOpenIcon(iconEmptyOpen);
/*else
this.setLeafIcon(iconDatatypeClosed);
this.setClosedIcon(iconDatatypeClosed);
this.setOpenIcon(iconDatatypeOpen);
return super.getTreeCellRendererComponent(tree, value, sel, expanded, leaf, row, hasFocus);
...the icons of the nodes are displayed correctly, but the dashed lines to visualize the level of a node and the + and - icons for collapsed or not collapsed nodes are not visible. I am using Windows LAF. What's wrong ?Please provide following information also:
1) Are you using the default images?
2) What is the Image URI?
3) Snapshot of the Structure window, property inspector window?
4) Are you using any switcher? -
I created a shared stream and selected public website on my iPad air, but pictures are not visible at that site. What can I do?
it's rchrdsrw again-- previously visible photos on shared photos on website are also no longer visible.
-
Image Library select/deselect ticks are not visible
Hi,
We are using Sharepoint 2013 (version
15.0.4569.1000). We have select/deselect ticks at list views but in image library list view, they are not visible. When List view page loaded there is a script error as below:
"Uncaught ReferenceError: InitImglibView is not defined".
I can't find the reason of this error. Can you help please?
Deniz ErThanks for the reply. Yes, i mean it. But i change the style as "Basic Table" from "Modify View" options. Screenshot is below
When i change the style from "Default" to "Basic Table", ticks are getting lost.
Deniz Er -
I have a problem trying to select a node of a JTree using JDK 1.3.1 and JDK 1.4 beta 3. I use a JTree with a DefaultTreeModel and DefaultMutableTreeNodes.
Before the tree became visible it has all the nodes loaded but not visible. Then I want to select a path of the tree using a node (DefaultMutableTreeNode) but I not able to do it.
The path isn't selected and isn't visible.
I use the following code:
jTree.setExpandsSelectedPaths(true)
jTree.setSelectionPath(new TreePath(node.getPath()));
//I've also tried with
jTree.expandPath(new TreePath(dmtn.getPath()));Thanks.Fair enough. I guess I need to do a bit more reading.
You have to create a new TreePath object because the
getPath() method of DefaultMutableTreeNode returns an
array of TreeNodes where as the setSelected method of
JTree requires a TreePath object.
Why are you creating a new path with the contents ofa
call to getPath?
wouldn't node.getPath() be what you want toexpend/set
visible/scroll to etc
try it without creating a new TreePath -
External hard drive not visible in disk utility or finder
Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
BruceAn update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce -
Data loaded in Infocube is not visible in the Reporting
Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
GirikumarHi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh.. -
I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.
The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program. -
How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out pleaseHello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H. -
Graph which should display the data of a view object not visible
Hi,
I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
Has anybody an idea?
Thanks in advance!
Edited by: user13061309 on 27.07.2010 06:53Hi Frank,
thanks for your response.
I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
Regards
Michael
Edited by: user13061309 on 06.08.2010 03:00 -
Mac OS 9 AFP file sharing volume not visible under Mac OS 10.5
An old blue-white PowerMac G3 running Mac OS 9.2.2 with file sharing on is not visible on the network for a MacBook Pro running Mac OS X 10.5.5. – However, a PowerBook G4 with Mac OS X 10.4.11 perfectly shows the G3.
Connecting to the G3 works on the new MacBook Pro with OS X 10.5 if I use the server's IP-address (afp://xxx.xxx.xxx.xxx) but does not work if I use the server's name (afp://<servername>).
All other shares on the network are visible for both the MacBook Pro running OS X 10.5 and the PowerBook G4 running OS X 10.4.
Why does the MacBook Pro with Mac OS X 10.5.5 not show the G3?
Why can't I connect to the G3 using its AFP name?I think this is because there is no AppleTalk on Leopard.
Ah, I stand corrected........
Go to SystemPreferences > Network
Select your connection in the left column. Advanced > AppleTalk
Enable AppleTalk for your connection.
sp
Message was edited by: brainslice -
Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.
Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil ShanbhagIt is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM
Maybe you are looking for
-
Enable tool tip in Exported PDF document from a CRE Report
Hi All, We are on BObj 4.0 and using CRE for our reports. We have enabled Tool tip text on mouse over for certain labels which works great in browser. When we export to PDF, we dont see the Tool tip text. Is there a way we can configure this in CRE s
-
Unable to run portal app in CE
Hi, i'm trying to develop the portal application project in CE. I have deploy the the portal project to the server successfully(i have registered sap instance in CE's preference). But when i try to run the portal component in the CE. it pops out a
-
Crystal Report for VS 2010 Installation Problems
So I have been trying to get this working for 2 days now without luck. I work for a software development company and we have slowly started to migrate some of our solutions from VS2005 to VS2010. The solution I'm currently working on was originally d
-
Remove Black Bars from Top and Bottom
Here's my situation: I shot my footage FULL FRAME (not anamorphic) but while shooting my footage I had markers on my LCD for a 2.35 Aspect Ratio. Now that my footage is edited I dropped the FCP matte filter for 2.35 For those of you out there I know
-
Getting prohibitory icon at startup on G3 iBook...
Hi all, Just picked up a 500mhz iBook for very short money knowing it was troubled. I get the circle/slash on startup. I've tried: Safe Mode Verbose Mode Single-User Mode Boot from CD Reset PRAM/NVRAM Reset PMU Nothing has worked. Could a bad hard dr