Lasso selection not visible

I've been editing pictures all day. For some reason, I can't get the magnetic lasso or any other selection tool to draw the marching ant line around the selection. I've not changed anything. I've made sure I have the actual picture selected, tried different layers, etc.
Any ideas why the selection tool suddenly would quit showing the area I'm selecting?
Thanks

one other thing just changed also. I can't go under the filter menu and select the "kodak" plug in I've been using for a long time. Any idea what I might have changed to disable a plug in and cause selection/marque to no longer be visible?
Thanks

Similar Messages

JTree selection not visible

The selected note in the JTree will not be displayed (highlighning)....why ? The node is selected...
TreePath tpath = mainFrame.getTreeApplications().getSelectionModel().getSelectionPath();
mainFrame.getTreeApplications().clearSelection();
mainFrame.getTreeApplications().updateUI();
mainFrame.getTreeApplications().getSelectionModel().setSelectionPath(tpath);

http://www.physci.org/codes/sscce.jsp

Spot removal tool target area selection not visible

When using the LR5 spot removal tool I can perform cloning or healing and LR automatically selects the target used to clone from, but I cannot see where this area is on the image. A pin should appear with a line connecting the area to be removed and the target area used to clone from. I see no pin. Is this controled by a setting?
Jack

Great, that works. Keep on learning.
thanks

I created a shared stream and selected publicwebsite, but pictures are not visible at that site. What can I do?

I created a shared stream and selected public website on my iPad air, but pictures are not visible at that site. What can I do?

it's rchrdsrw again-- previously visible photos on shared photos on website are also no longer visible.

Image Library select/deselect ticks are not visible

Hi,
We are using Sharepoint 2013 (version
15.0.4569.1000). We have select/deselect ticks at list views but in image library list view, they are not visible. When List view page loaded there is a script error as below:
"Uncaught ReferenceError: InitImglibView is not defined".
I can't find the reason of this error. Can you help please?
Deniz Er

Thanks for the reply. Yes, i mean it. But i change the style as "Basic Table" from "Modify View" options. Screenshot is below
When i change the style from "Default" to "Basic Table", ticks are getting lost.
Deniz Er

External hard drive not visible in disk utility or finder

Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
Bruce

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

Graph which should display the data of a view object not visible

Hi,
I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
Has anybody an idea?
Thanks in advance!
Edited by: user13061309 on 27.07.2010 06:53

Hi Frank,
thanks for your response.
I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
Regards
Michael
Edited by: user13061309 on 06.08.2010 03:00

Mac OS 9 AFP file sharing volume not visible under Mac OS 10.5

An old blue-white PowerMac G3 running Mac OS 9.2.2 with file sharing on is not visible on the network for a MacBook Pro running Mac OS X 10.5.5. – However, a PowerBook G4 with Mac OS X 10.4.11 perfectly shows the G3.
Connecting to the G3 works on the new MacBook Pro with OS X 10.5 if I use the server's IP-address (afp://xxx.xxx.xxx.xxx) but does not work if I use the server's name (afp://<servername>).
All other shares on the network are visible for both the MacBook Pro running OS X 10.5 and the PowerBook G4 running OS X 10.4.
Why does the MacBook Pro with Mac OS X 10.5.5 not show the G3?
Why can't I connect to the G3 using its AFP name?

I think this is because there is no AppleTalk on Leopard.
Ah, I stand corrected........
Go to SystemPreferences > Network
Select your connection in the left column. Advanced > AppleTalk
Enable AppleTalk for your connection.
sp
Message was edited by: brainslice

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

PO approval Email not visible in SOST even after all settings intact

Hello All,
The 'PO requiring approval ' email is not visible in SAP since 10.11.2010.
The user decision task which sends a notification to approver regarding the approval has been going successfully for two yrs and now suddenly since 10 Nov 2010, it stopped. The workflow log does not show any error. Also the settings in SWN_CONFIG have not changed since 2008. The approvers have their correct email Ids set in SU01. Even the jobs 'SWNSELSEN' and 'SAPCONNECT' are scheduled and running successfully and sending emails for all other sap notifications.
Suddenly they have stopped sending notifications for this particular issue.
Please help me, where to look for. Are there any services involved other than these settings.
Awaiting eagerly for the solution.
Neha

Hi Neha,
How you are sending mails for dialog workitem?
Are you using the email send step inside the workflow or you using the batchjob to send the mails (send task description as mail via batchjob).
Id using the batchjob check the that task is present in the selection criteria.
(report to send mail is RSWUWFML)
-Swapnil.
Edited by: Swapnil Pawar on Nov 18, 2010 9:03 AM

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Lasso selection not visible

Similar Messages

Maybe you are looking for