June 2013 CU...object error on ProjectServer_Reporting_DB

While trying to install the revised June 2013 CU for Project Server 2010, the field engineer received the below error message. Has anyone encountered this same issue? If so, and you were able to resolve it on your own without PSS's help, can you please share
how you resolved it? Thanks in advance.
[OWSTIMER] [SPUpgradeSession] [INFO] [9/14/2013 2:47:15 PM]: ProjectDatabase Name=abc_ProjectServer_Reporting_DB
[OWSTIMER] [SPUpgradeSession] [ERROR] [9/14/2013 2:47:15 PM]: Upgrade [ProjectDatabase Name=abc_ProjectServer_Reporting_DB] failed.
[OWSTIMER] [SPUpgradeSession] [INFO] [9/14/2013 2:47:15 PM]: ProjectDatabase Name=abc_ProjectServer_Reporting_DB
[OWSTIMER] [SPUpgradeSession] [ERROR] [9/14/2013 2:47:15 PM]: Exception: Invalid object name 'abc_ProjectServer_Published_DB.dbo.MSP_TASK_BASELINES_20130628'.
Invalid object name 'abc_ProjectServer_Published_DB.dbo.MSP_TASK_BASELINES_20130628_deletedRecords'.
[OWSTIMER] [SPUpgradeSession] [INFO] [9/14/2013 2:47:15 PM]: ProjectDatabase Name=abc_ProjectServer_Reporting_DB

Hi US_Coder,
Message says that upgrading the reporting database actually failed. Looks like reporting database has some kind of reference to 'abc_projectserver_published_DB.dbo.MSP_TASK_BASELINES_20130628'. and now it is not able to find that table.
Hope this helps you troubleshoot further.
Vikram Daruru - MSFT

Similar Messages

Cannot insert object error using Power View in Excel 2013

I created a short table in Excel 2013, positioned the cursor in the table and clicked Inset/Power View Report. I get a status window saying Excel is opening a Power View sheet but then I get a Power View error: Cannot Insert Object. I am able to insert new
tabs in the workbook. When I try the insert again, I just get the Power View error. I looked at other threads with similar issues and did the following:
Made the Formula bar visible - no change
Tried to repair Office 2013 but that option is not available when I right click on the program in the Control Panel
De-installed Silverlight - Tried to insert Power View Report. A Power View tab was created with the Power View picture and Power View ribbon. Got the message to install Silverlight and Reload. Installed Silverlight hit Reload and the Power View tab didn't
change. Hit Power View Report and got the Cannot Insert Object error message again.
Any help is appreciated.

Hi,
Did you use PowerView first time? I notice you had found a similar thread and tested the solutions.
PowerView is an add-in in Excel2013, We must make sure that you check some option in the trust center and Add-in center.
http://blogs.office.com/b/microsoft-excel/archive/2012/10/04/intro-to-power-view-for-excel-2013.aspx
Location1: Excel Options>Add-in>Solver Add-in enable
Location2: Excel Options> Trust Center> Add-in
Then you said that you couldn’t repair the Excel 2013, please refer to the following link:
http://office.microsoft.com/en-gb/outlook-help/repair-office-programs-HA010357402.aspx
At last, we may test it in clean boot, please refer to the following link:
http://support.microsoft.com/kb/929135
Regards,
George Zhao
TechNet Community Support

ISight not working with Webex, GoToMeeting or Lync...BUT works with Skype, Facetime, Photobooth (June 2013 MBA)

Brand new MacBook Air (June 2013, 8MB RAM, 500GB SSD)
iSight not working with Cisco Webex, Citrix GoToMeeting or Microsoft Lync (error = webcam not detected); BUT iSight works with Skype, Facetime and Photobooth.
3 hours of phone support with Webex - no luck.
Tried SMC and PRAM reset - no luck.
Tried erasing disk and reinstalling OSX 10.8.4 and apps manually with latest versions - no luck.
Apple phone support says it's not Apple's problem because Apple apps work.
Exchanged at Apple Store for another new MacBook Air, again installed apps manually with latest version (not from time machine) - STILL NO LUCK!!!
Is there an update Apple or Cisco, Citrix and Microsoft need to put out for the new MBAs or do I just have 2 lemons???

You're welcome.
1wave wrote: ... an external webcam which might be a cheaper alternative ...
It will be interesting to see what the vendors say about using a Mac-compatible external webcam.
If not, some netbook or other Windows® device might offer compatibility at a much lower cost than a compatible Apple notebook.
We will watch for your update(s). What the vendors tell you will be very helpful to others who share this or similar issues with their new MBAs.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

"object reference not set to an instance of an object" error while running ssrs report locally

Hi Folks,
I am a bit new to SSRS.
I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
But while running the report I am getting "object reference not set to an instance of an object" error.
For a note I am trying execute the report locally.
Any help would be highly appreciable.
sarat chandra sahoo

Sorry for late reply Sinaloe..
I have added a dll file in my report reference. And in a textbox trying to execute this below.
=Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
where Getstring() is a static method in the dll.
I guess some configuration setting I am missing here.
1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
sarat chandra sahoo

Office Web Apps Server June 2013 Cumulative Update Excel Freeze Pane and Hide/Un-hide Feature Missing

Hi,
I have recently updated the Office Web Apps Server to the June 2013 Cumulative Update (KB2817350) which was published with the new features that allow rendering of freeze pane, hide/un-hide the excel worksheet and row/columns, Header
Row Snapping, Sorting, Data Validation and Autocomplete. i have followed the TechNet article (http://technet.microsoft.com/en-us/library/jj966220.aspx)
to update the office web apps server. Current setup is a SharePoint 2013, SQL 2012 and Office Web Apps server. All server are installed on Windows server 2012.
3vild3vil

Hi,
Sorry to inform you that these new features are specific to cloud Excel Web App in both SkyDrive and Office365. There is no update available for on-premise Excel Web Apps installed locally
yet. Thank you for your understanding.
http://blogs.office.com/b/microsoft-excel/archive/2013/06/26/we-ve-updated-excel-web-app-what-s-new-as-of-june-2013.aspx
Miles LI TechNet Community Support

Sharepoint Designer 2010 Workflows Struck in "starting" status after Sharepoint 2010 SP2 upgrade(KB2687453 - June 2013)

We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.

Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Office 2013 Professional Plus - error 1653

Hi
I tried to install Office 2013 Professional Plus 64 bit on my Windows 8.1 Update 1 pro 64 bit Lenovo Thinkpad E530.
The MSI crashes after I deselected Lync and OneDrive for Business and selected Organigram for Powerpoint with the error code 1653 showing up on my Event Log.
The message in my Event Log looks like this:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-27T06:01:00.000000000Z" />
<EventRecordID>24997</EventRecordID>
<Channel>Application</Channel>
<Computer>sun</Computer>
<Security />
</System>
- <EventData>
<Data>90226236923</Data>
<Data>5</Data>
<Data>OfficeClassicSetup</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>15.0.4454.1000</Data>
<Data>OSETUP.DLL</Data>
<Data>15.0.4569.1503</Data>
<Data>1653</Data>
<Data>Unspecified</Data>
<Data>FC73469E</Data>
<Data>1653</Data>
<Data />
<Data />
<Data />
<Data>C:\Users\Wenger\AppData\Local\Temp\SetupExe(2014072708001915DC).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(201312051053101B60).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(2014072707211315A8).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(201407270727311814).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(201407270734471130).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(201407270741391118).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(201407270748481BB0).log C:\Users\Wenger\AppData\Local\Temp\SetupExe(2014072708001915DC).log</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report_15.0.4454.1000_df68ca3f8edd6e5681e49fd7574098be8eb1ae_00000000_15d80367</Data>
<Data />
<Data>0</Data>
<Data>5d904862-1553-11e4-beae-b888e3ddd920</Data>
<Data>0</Data>
<Data>d2963090adfe06bdd11d2f48d5050f44</Data>
</EventData>
</Event>
What I've tried so far:
Used several fixitTools
Office 2007 Suite:
http://support.microsoft.com/kb/928218#Method2
Office 2010 Suite:
http://support.microsoft.com/kb/290301#Method2
And of course
Office 2013 Suite:
http://support.microsoft.com/kb/2739501
I even executed this PowerShell script to ensure that Rollback is disabled and the Microsoft Helper is deleted
http://gallery.technet.microsoft.com/office/How-to-fix-Office-af646d16
Note that my Microsoft Helper folder was not even there before I run the script.
The Rollback was enabled as I checked and I checked manually for another or the same installation to be listed in the Program Settings.
After several Reboots and run as Administrator and frustrations I came to you.
Could you help me please?
Thanks in advance
For additional information, I of course share them with you.

Hi,
The description of error 1653 is that you could not perform a multiple-package transaction because rollback has been disabled. Multiple-Package Installations cannot run if rollback is disabled. Available beginning with Windows Installer version 4.5.
According to error code 1653, I find a similar question about it. I address it here, you can follow Micrey’s suggestion to check if it works.
http://social.technet.microsoft.com/Forums/office/en-US/f6501a3d-5c98-467b-9f48-3c6d20a454df/microsoft-office-professional-2013-encountered-an-error-during-setup?forum=officesetupdeploy
“The issue when you hit a "1653" is that Windows Installer "DisableRollback" is set. Office 2013 requires that "rollback" be enabled. If you are getting a "1653" error in your logs as Ken did then the solution is to delete the "DisableRollback" (or set to
'0') at the following registry keys:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Installer
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer”
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT5312 I keep getting an email from Apple telling me that my Apple Id has been successfully reset when I did not reset them. Started early June 2013 and in a month i have had to reset it three times. Apple support was not helpful. Any suggestions?

I keep getting an email from Apple telling me that my Apple Id has been successfully reset. I did not reset it. Since early June 2013 to now i have had to reset it 3 times. It is not an easy one to remember either. Initally I thought it was some pfishing expedition but no purchases have been confirmed by my visa. My kids use my Apple Id to download APs and I am informed when this happens. Nothing strange happening on the financial site at all. Just frustrating as we have to keep updating the ID to use messenger, I cloud etc on all of the devices. I called Apple Support and the girl initally said she knew nothing about this but then spoke to someone else and they are aware of this ongoing problem and are working on it. Any suggestions? Are others having the same problems?

If the system didn't ship with Mountain Lion originally and you didn't purchase Mountain Lion yourself, then you will need to purchase. A purchase by the system's original owner cannot be transferred to you.
Unless you have another system on which you have purchased Mountain Lion, you will need to first install Mac OS X 10.6.8 on the iMac, for which you'll need either the original installation disks, if the iMac came with 10.6, or a retail copy of 10.6. Install 10.6 and upgrade to at least 10.6.6, and then you can buy Mountain Lion from the Mac App Store, presuming of course that the imac can support Mountain Lion. See:
http://www.apple.com/osx/how-to-upgrade/
Regards.

I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

CO OBJECT ERROR IN MIRO FOR UNPLANNED DEL COST

Dear Friends
I m facing one error in MIRO can u guide me in that context.
well in MIRO i m postin Unplanned deliver cost.......and it is asking me assignment to this G/L for Cost center object..
ERROR: Account 40201070 requires an assignment to a CO object
..I have already assigned the Cost center for the G/l in OKB9 is there anything else has to be done
Actually we have 4 plants and 4 Business area i.e whenever i am doing any posting for BW01 -and Business Area BA01 My cost center BW01402 will get hit similarly for other plant and Business are Cost center has been assigned in OKB9 in Details per business Area,is it the right method or anything else has to be done.
Actually in OKB9 i have maintained that GL and in Detail per business area i have maintained cost center per business area
we have assigned the right Cost senter only i.e for different Plant and differenct business area we have asigned different cost center.
Then y i m getting error i m not understanding..
Please guide me in this context.
Also i am trying other method of posting Freight (unplanned delviery cost ) as well as labour charge through ACTIVATING -"Activate Direct Posting to G/L Accounts and Material Accounts"
So that for particular G/L I can Debt or credit that account,in which will doing MIRO G/L Tab gets activated ,i m entering G/L and entering amount for freight and Labor is this the correct procedure.
Regards
shailesh

I have already assigned this G/L as primary cost element in FS00 and in OKB9 also Cost center is assigned as per Business Area as mentioned in the thread
i.e we have 4 plants and 4 business area so we assigned 4 cost centers to 4 business area, so whenver i m postin unplanned delivery cost for a particular plant then my GL should hit with proper cost center but still it is asking for CO OBJECT
ERROR IS:
"Account 40201070 requires an assignment to a CO object"
If i maintained the default Cost center in FS00 in cost element then it doesnt give error but my requirement is that for a particular plant ,and business are only cost area assigned to it should hit
Any other solutions.
Thankz and regards
Shailesh

How To Get iWork Apps Free on iPad 4 Purchased in June 2013?

Since I've got my new 13" MBPr in June 2014, the iWork apps are apparently preinstalled, my question is, can I get the iWork apps free on my iPad 4 purchased in June 2013? On Apple Store on my iPad 4, the iWork apps show a price tag of $9.99 each. Any idea how to get those iWork apps free on my iPad 4 using same Apple ID?

iWorks apps for Mac and iWorks apps for iOS are different products, the apps only work on the appropriate operating system. They are therefore priced and sold separately.

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

"Microsoft Office Professional Plus 2013 encountered an error during setup."

"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?

Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Microsoft office professional 2013 encountered an error during setup

Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?

I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram

June 2013 CU...object error on ProjectServer_Reporting_DB

Similar Messages

Maybe you are looking for