Junk Characters on first two pages of Cheque Printing SAP Script.
Hi All
I implementing cheque printing for one of our client's Oman based subsidiary. I have copied the standard SAP Script F110_PRENUM_CHCK into a Z-Form and maintained its original language as EN. I have commented out all the unnecessary peices of information in all the windows and customised as per my requirement.
Now the problem that i am facing is that when i execute this script through the standard driver program RFFOUS_C, i am getting junk characters on first two pages of the script. The info displayed comes in the HEADER and MAIN Windows. The desired output is coming in the 3rd, 4th and 5th pages.
Please let me know how should i get rid of these junk characters.
Regards
Harsh
PS: All info printed is in English only.
Hi
Thanks for your response.
Yes, the remittance advice header info is getting printed in the HEADER Window and its contents in the tabular structure are in the MAIN Window.
I am passing EN as the language.
Adding to this, the report RFFOUS_C gets executed and i am checking the spool that is created which has the junk characters on the first two pages.
Regards
Harsh
Similar Messages
-
Print in PDF only Prints the first two pages
I am have been ahving problems with my creat PDF account, only printing the first two pages, when i print something to PDF from a webpage. I.E. Pinterest. It will only print the first two pages and the rest will be blank or incomplete. I am at the end of my rope and dont know how to fix it. I recently got Acrobat 9 standard thinking this may help, but the problem still exists, which irritates me more. Please help!
Try here: http://forums.adobe.com/community/createpdf
There people who use CreatePDF on a daily basis there, who know much more about it . -
How can I print from MAC with Acrobat Reader. I can't seem to get it to print correctly , first two pages of letter size works ok after the remaining pages get moved up and the printing is cut off.
I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.
-
C309a (Duplex Printing): the first two pages don't "duplex"
Hi, I've got a little annoyance here: I love the duplex printing feature, but the first two pages don't "duplex!" The first page prints fine but doesn't get retracted back inside, and then the second page prints upside-down on a new sheet of paper. The rest of the document "duplexes" as expected. Is there some option I'm (not) enabling?
I'm running Windows XP SP3, wireless printing. Also for what it's worth, everything I've duplex-printed have been PDF files.
Hopefully there's a solution and I don't have to continue leaving the first two pages of my documents blank
Thanks in advance!If you have blank pages in your file you must set the print dialog through print booklet to print blank pages.
-
When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?
Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.
-
Four pages of apps in iTunes, but only first two pages visible on iPhone!
If I connect my iPhone 4 to my notebook and launch iTunes, I can see four pages of apps on my phone - two pages, then a blank page, then a further two pages.
However, looking at the phone itself, only the first two pages are visible (and only two little dots at the bottom of the home page).
I can shuffle the apps around in iTunes without any difficulty, but when I press 'apply' the sync ends with everything back as it was in the first place.
iOS and iTunes both up-to-date, rebooting and soft reset doesn't fix.
Hope someone can help!
ThanksWe are having the same problem. Any updates?
-
Remove First Two Pages of Print from ALV
Dear All,
I am trying to give a print of standard ALV report <b>BCALV_GRID_VERIFY</b>. When I give a print of the Output ALV Grid using the Icon on the ALV toolbar. I get two more pages with Print Parameters and the total count.
Could someone tell me how to remove the first two pages before I get the actual print. Everytime I give a Print I get these two pages so it budget issue wasting everytime two pages for a single page print even.
Thanks & Regards,
JJ.Hi Joseph,
in my case these are the settings...
Just change your spool settings also ..
in my case
SAP Cover Page System Administrator: Default Settings
OS Covert Sheet System Administrator: Default Settings
ALV statastics NO
i think for your case ALV statastics is markes as YES is it true.
Can you change the settings.
Regards
Vijay -
Calling different pages in a single sap script based on conditions?
Hi All,
Can anyone please give me an example of how to call different pages in a single sap script based on condition. Eg., i need to call 5 differnet pages from a single sap script based on 5 company codes.
Please help
Regards
PriyaThis approach to make call from SAPscript. Its concept is similar to make call to a subroutine in another program. I would presume you understand how to use USING and CHANGING parameter. =)
SAPscript -
/: Perform get_date in program z_at_date
/: using &p_year&
/: changing &new_date&
/: endperform.
program z_at_date -
form get_date TABLES rec_in STRUCTURE itcsy
rec_out STRUCTURE itcsy..
DATA:
v_year type char10.
sap script and subroutine uses itcsy structure to transmit parameters
first parameter is incoming while second parameter is out going
their function is like an internal table with header line
all data types between SAPscript and subroutine are string.
so, you might need additional conversion.
read incoming parameter with exact name from SAPscript
READ TABLE rec_in WITH KEY name = 'P_YEAR'.
IF sy-subrc EQ 0.
v_year = rec_in-value.
ENDIF.
to return value, use the exact name on the second structure
CONCATENATE v_year v_year INTO v_year.
READ TABLE rec_out WITH KEY name = 'NEW_DATE'.
IF sy-subrc EQ 0.
rec_out-value = v_year.
MODIFY rec_out TRANSPORTING value WHERE name = 'NEW_DATE'.
ENDIF.
endform.
Hope this helps =) -
Printing Issues: Keynote only prints first two pages of presentation
I am trying to pring an 11 page Keynote presentation on an HP 4600 color laser printer. It will only print the first 2 pages.
If I convert the presentation to PowerPoint, it prints all ages correctly. If I print a word or pages document, all pages print correctly.
What gives with keynote?
MacBook Pro, 2.1 GHz Mac OS X (10.4.9) 2 GB RamIt is likely that there is something funky with one of the images on the page. The next step would be to delete the images one at a time to see which one it is. Once you have isolated it, you could try saving it in a different format (e.g., TIFF, or JPEG, or PNG), and see if that solves the problem.
-
Then there are seven pages of empty grey squares ( where the images should be ) and scrolling down to the bottom there is a button which has `show more results` written on it, this happens every time I do an image search. I have done the same search using `internet explorer` and there is no problem finding thousands of pages of images.
Finally Ive found a solution !!!!.
Open your browser, click images and search for any image, when the images appear (probably only two pages of them) scroll right to the bottom of the page and click `Switch to basic version`. Problem solved!!!!!!. -
Two Page Letter Not Printing Correctly
Hello,
I have a two page letter. The first page prints fine but the second page prints with both the first and second page combined. Does anybody know what could be causing this?
ThanksIf you are using subforms, and you have -aap set to "on" you could see something like this. Put -aapoff on the merge command line. What happens is that with -aapon (print all pages)it will try to put all subforms on every page. Likewise, if you have the first page identified as jfmain, then you will get it on every page.
cheers
Chris -
Blank page in cheque printing using sapscript
hi,
i've created a Z script for cheque printing copying the standard script and driver program remains RFFOUS_C. I've deleted all windows except CHECK and MAIN. In main, i've commented all code and elements. In check, i've added my own code to print cheque details and rest everything else is commented. There are no blank lines in either of the windows. There is only 1 page i.e. FIRST in the script and no next page. After all this i'm still getting an extra balnk page after i get cheque details on 1st page. i'm using Transaction F110 to generate the cheque.
Please suggest what can be done in such a case. Do i need to make changes in std program RFFOUS_C for this??
Thanks!Hi,
Are there any blank data in the internal table which is used for printing. Also check whether there are any othere details like text elment after printing check details
Thanks
kamath -
Second page not triggering in SAP script
plz help me in this too
The code below is for two pages.
Problem is that...My second page is not triggering.
In the layout
for Fist page
attributes.
page: FIRST
next page: SECOND
for second page
attributes.
page:SECOND
next page: SECOND
REPORT ZNEW1 .
TABLES: MARA.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
ERNAM LIKE MARA-ERNAM,
LAEDA LIKE MARA-LAEDA,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF table ITAB
WHERE VPSTA = 'K'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
*DEVICE = ' '
DIALOG = 'X'
FORM = 'ZNEWLAY1'
LANGUAGE = SY-LANGU
EXCEPTIONS
OTHERS = 1.
call function 'START_FORM'
EXPORTING
FORM = 'ZNEWLAY1'
LANGUAGE = ' '
STARTPAGE = 'FIRST'
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'HEADER'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'WRITE_FORM'
EXPORTING
ELEMENT = 'LOGO'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'LOGO'
EXCEPTIONS
UNOPENED = 4
OTHERS = 9.
LOOP AT ITAB.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2
ENDLOOP.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'FOOTER'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'END_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
OTHERS = 3.
call function 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = 'ZNEWLAY1'
LANGUAGE = ' '
STARTPAGE = 'SECOND'
PROGRAM = ' '
MAIL_APPL_OBJECT =
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'WRITE_FORM'
EXPORTING
ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'END_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
OTHERS = 3.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.Hi Scientila Choudary,
Your problem will be cleared once you remove start_form and end_form as these are not necessary.we have to use start_from and end_from when we are operating on different forms.Presently we are operating on only no need to use this.
Once your problem is solved please close this. -
Putting cross line under top left corner in a cheque through SAP SCRIPT.
Hi,
How to put cross line over top left corner in cheque (cross cheque) while doing it through SAP SCRIPT.
Thanks.Hi,
i can give you two solutions. try the thing which looks fine for you.
1. say this is line editor of the script.
you have to design like this manually(its a bit time consuming for alignments and all - both should align side by side using '/')
so try the second way.
2. make this 'corss' as an image and simply pass as a text on to the window on which you needs this.
it will be simple and an easy way.
Thanks & regards,
Sasi Kanth. -
Problem in multiple page printed (SAP Script )
Hi Experts ,
In SAP Script print ,
First page print is perfect on preprinted stationary ,but
Second page data is getting printed 2-3 cm up.
Please tell me various reason for this ...
Thanks
SonalHi Sonal ,
This happens with your predefined stationary .
Are you declaring it in the same window where your declaring your data ?
If yes, Try taking another variable window and keep all your predefined sationary there and then call it evry time you call your window with data .
Or, It can be with the Text element try giving 2 empty lines before the text element it solves your problem!
Hope it helps!
Much Regards,
Amuktha .
Edited by: Amuktha Naraparaju on Feb 9, 2009 9:57 AM
Maybe you are looking for
-
My IPhone 5 won't allow me to turn on my bluetooth, when I try to turn bluetooth to the on position, it automatically goes back to the off position. I can't connect bluetooth with anything?
-
Error while loading Flat file to the table (ORA-00936: missing expression)
lat file Hi Gurus Receiving the following error while trying to load of flat file to the database : ODI-1228: Task test_file_load (Integration) fails on the target ORACLE connection DEMO_STAGE. Caused By: java.sql.SQLSyntaxErrorException: ORA-00936:
-
My Trash folder is no longer visible on mail sidebar
Only my inbox is visible on the Mail sidebar. I no longer can find by Trash, Juck, and Archive folders.
-
Paid subscription, but opens in trial mode (expired)
My Premiere Pro CC 2014 has finished its trial and I have already payed for the creative Cloud in order to get the Premiere Pro CC 2014 and Creative Cloud only let me download Premiere Pro CS6. Why??? Can the newest CS6 version open CC' files?? What
-
Change Approval Agent in Workflow WS10400002 (SRM)
Hi Gurus, My expertise in Workflow is very low and I have a requirement where I need to copy standard Workflow WS10400002 to a Z one and change the Approval Agent Determination. They do not want to use the Organizational Structure or Roles for this b