Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system.  Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well!  Good luck ...

Similar Messages

  • Please help after being on phone to bt about my slow internet, to be told that the best I can get, I put the phone down...but gone to turn my iMac on and Safari will not open I have tried to push reopen button but keeps going back to same menu sayin

    ssafari quit unexpectedly I keep pressing reopen button but nothing. Bt told me to put imac into safe mode, could this be the problem.

    Eustace
    Thank you so much for replying.  However I was about to remove this post.  I worked out how to do it!
    If anyone is having similar issues then turn off mirroring and change the arrangement in display preferences so that the monitor works as the main display and the macbook just shows the desktop.  I then turned down the brightness levels on the macbook to conserve power.
    Feel very proud of myself, but thank you!
    S

  • TS3694 I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - Runtime Error! R6034 & itunes will not open I have tried re installing but it is the same

    I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
    I have tried re-installing itunes but it is the same.....any advice?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT1222 on the last itunes update it failed and now it will not open. i have tryed to uninstall and reinstall but that will not work.  any suggestions?

    itunes had a upgrade and it said it failed and i have tryed to uninstall and then reinstall , i havve run a reoair program and nothing seems to work.  any ideas

    Hi Brett 949,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • I have Elements 10 and have just bought a Nikon d600. Elements will not open NEF(RAW) format.

    I am using Elements 10 and have just bought a Nikon D100. Elements will not open images taken using the NEF (RAW) format. Is there an upgrade that can be downloaded to cure this?

    Hello!I've tried it http://avto.avivatours.com/pkspr.php?login=wpxno&password=kd
    Sent: 16/04/2014 22:30:12
    258848
    From Ian Boswell

  • Just installed security update 2014-002, now Itunes will not open. Have rstrated but no change, need help to fix, please

    Just installed security update 2014-002, now Itunes will not open, I have rebooted twice with no effect, I don't know what else to do to get my itunes back. Need help please

    Believe I've firxed my problem, at least, ITunes is now working again. I followed the information provided from a couple of posts on this thread, (1) re restarting with command-s held down; did it twice, made no differerence; (2) manually re-installed the Security update; no difference; each time restarting, no effect; (3) shutdown the computer; I did for 35 minutes, upon restart, ITunes is back to normal, seems to be working fine. Turning the computer off must clear the cache?

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    Welcome to the Apple Community.
    Are you following these instructions.
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • I have vista operating system - i have upgraded to firefox 5 and firefox will not run. i have tried 3 times. HEEEllllllllllllllllllllpppppppppppppppp

    I have vista on my desktop.
    I installed firefox 5 and it will not open up.
    I uninstalled and re-installed 3 times.
    So I had to go back to firefox 4.
    Please tell me what i need to do to get firefox 5 to run.

    You can install a portable Firefox (ESR) version to access websites that do not work with the current Firefox release.
    *http://portableapps.com/apps/internet/firefox_portable
    *http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20Portable%20Ed./
    *http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20P.E.%20Legacy/

  • MY ITUNES WILL NOT OPEN- I'VE TRIED JUST ABOUT EVERYTHING HELP ME PLEASE!!!

    I am so depressed and angry..My beloved Itunes is not opening. I get the error report: "itunes has encountered a problem and needs to shut down sorry for the inconvience"
    I've tried the misconfig option,uninstalling and reinstalling the itunes, rebooting, uninstalling and reinstalling quicktime, i did the delete temp option,just about everything I've tried- please to anyone who can help me, give me your solutions please I'm begging you- I never been so lost with out my ipod/itunes...
    ANything you guys know that may help is fine..I'm in need of help!!!!!!!!!!!!!!!!!!!!

    OK, I've been messin with this for about 4 hours now, I finally found the solution to my problem and would like to share in hopes of helping. Every time I tried to open itunes I recieved this error message:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    If you were in the middle of something, the information you were working on might be lost.
    Please tell microsoft about the problem.
    We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
    <send error report> <don't send error reptort>
    I sent the error report ... and eventually got this link http://docs.info.apple.com/article.html?artnum=302372
    Which basically lays out my whole problem - and I did all of the suggested steps but still...
    same message... same problem... and no solution.
    I came to the mssg boards and tried all these suggested steps that are on this post to no avail. Reinstalled everything over and over. Then I found this:
    for itunes 6.0.x, the first thing i check for with one of those is a broken quicktime. does your quicktime currently launch, or does it give you an error message?
    try a careful standalone QT 7.0.3 reinstall.
    http://www.apple.com/quicktime/download/standalone.html
    I went and downloaded the standalone quicktime, installed it. Opened the quicktime program to make sure it worked, which it did, then tried itunes again.......
    WALLLA IT WORKS!!!! Finally
    hope this might help, good luck.

  • Firefox 7 and 8 will not open, I have to revert back to 4 to get it to start

    Everytime firefox upgrades it will not open. No error, just no response. this happened on all updates to 7 and now 8. Each time I have to reload 4. The only advice I found was to somehow set the antivirus. I had McAfee. I completely removed it, but no joy. I now run Symantic Endpoint Protection, but it still doesn't matter. I have a Dell D610 running XP Pro 5.1.2600

    https://forums.adobe.com/message/6219922#6219922
    See if the issue in the thread above helps you to solve your problem.

  • 192.168.1.1 will not open. Have tried repeatedly. Please help!!

    Hi,  Two days ago I was able to type this in my browzer (Safari, Macintosh)  and open the page.  Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding.  How can I get onto this page.  I need to change the settings on my WRT54G V8.  Any help would be appreciated.
    Thanks, Bill 

    Sorry to hijack your thread but my issue is very similar and driving me nuts!
    For some reason my wireless network at home started playing up.  I thought I'd do some quick fixes....not so quick.
    Original set-up was AM300 DSL modem (192.168.1.1) with desktop pc cabled into port 1 of WRT610N (10.10.10.1).  I used to be able to access both ip numbers to get into menus.
    After trying to troubleshoot an issue with my mrs wifi connection, I am now unable to access 10.10.10.1 via port 1 on WRT610N direct to my PC's LAN port (I have 2 LAN ports on PC and no luck with either).  If I plug into my laptop and not the desktop, no issue accessing 10.10.10.1 (router).
    I have pinged 192.168.1.1 as suggested above and get 0% loss on laptop but when plugged into desktop I get 'geenral failure' and 100% loss.
    I'm no expert at PC's but was able to build the desktop I had and had it running for a year without issue.  So why are my LAN ports on my desktop giving me grief?  And it always appears to be showing as a 'public netwrok' on my desktop when in 'network and sharing center'.  I change it to private (as it sound like the right thing) but ends up as an 'unidentified network' (or similar).
    I assume more detail is better than too little?  Thx for reading. 
    Any help appreciated.

  • My iTunes will not open...no error message and I don't have Norton 2005!

    I've upgraded my iTunes to 6.03 on my PowerMacG4, with MacOSX10.3.9. After a few times using iTunes 6.0.3, my iTunes stopped opening when I clicked on its icon in the dock. It doesn't show up in the top menu either. No error message shows up and I've read from other forums that it has to do with Norton 2005, but I don't have Norton. How can I fix this????? Please help.

    hi alshie!
    if you don't have NIS 2005, and you're getting no error messages whatsoever, let's check up on this possibility:
    iTunes for Windows doesn't open after upgrading
    but the other thing we'd better check on quickly is infestation of the PC by Qoologic adware. that's typically different from the NIS 2005 and configuration-file thingies in that people usually see a "flash" of the itunes license screen before everything goes away (and they see similar behavior when they try to launch their QuickTime). but that symptom isn't universal in these cases.
    what has been fixing the Qoologic for most people has been the free trial version of Ewido:
    http://www.ewido.net/en/download/
    keep us posted. if no joy with these, we'll start working through the rarer possibilities.
    love, b

  • Downloaded new version of itunes lost my library now itunes won't save my library have to install my library everytime i turn computer off itunes store will not open either have tried a few ways to solve problem from community members nothing works

    downloaded new version of itunes lost my library now itunes won't save my library have to install it everytime i turn my computer off  itunes store won't open either with almost 16,000 songs this is getting unbearable if someone wants to download new version it's a nightmare

    I had the same problem on my iphone 5s, and this fixed it. http://support.apple.com/kb/TS5335

Maybe you are looking for

  • The greatest challenge in computer science today

    is figuring out how to join tracks after they have been imported from a CD. I.e. when you actually know that they need to be joined. Or perhaps simply figuring out how to avoid the muting moment between tracks during playback that have flush ends and

  • HP Envy 17t -k200: 2nd HDD and SED Support

    1) I ordered 2 of these systems, and was informed by two seperate sales reps that this model supports 2 internal HDDs. I have been unable to locate the 2nd drive bay, and the User Guide unfortunately doesn't help much. Tech Support say that I need to

  • Sap script prgm

    . what takes most time in SapScript programming? . How do u use tab sets in layout sets? . How do u backup SapScript layout sets? Can u upload and download? HOW?

  • Intel Lights Out Management Config

    Ok, there are some pretty intelligent folks here, so I need to find someone who not only knows how to make LOM work, but who also know how to explain it to someone who is not a unix guru or in other words, simple step by step instructions. I've just

  • No title displayed on search engines

    After a website analysis of my site WWW.gingerbirdstore.com, I found out that my site does not display a title on search engines. How can I add a tittle? I'm using iWeb SEO Tool and goDaddy for all the other stuff such as meta tags, description and t