Just installed dual band router/wifi, cannot log into Apple ID.

I just installed a new dual band router/wifi and now i cannot log into the Apple account on my Apple TV. I tried restarting the computer, Itunes and apple tv, still no luck. My apple tv is connecged via the ethernet cable.

Hey katikapral,
The article linked below details a few additional troubleshooting steps that can help get iMessage successfully activated on your iPhone.
If you get an error when trying to activate iMessage or FaceTime
https://support.apple.com/en-us/HT201422
All my best,
Allen

Similar Messages

I just installed a new router and cannot get my ipad to connect now and I have no idea what settings should be or how to go about this

I just installed a new router and cannot connect with my ipad now. I have no idea what settings I shold be looking at or how to do this

you likely need to setup your router using an eathernet cable and a computer to turn on the wifi part and set an encryption level and password or the likes
if you havent do such things before you may require help from somebody who have
the router likely comes with an instruction manual how you set it up the first time

Cannot log into Apple Developer (iOS section)

Hi, there!
I am a iOS developer which cannot access my developer profile, on the website developer.apple.com/ios but I am capable of logging into iTunes Connect, hence no problem with the login and password. Is anyone now having similar problems? I know that I have to pay shortly the member fee (I think the 27th of November, but not exactly sure), maybe it has something to do with that? I sent my question as well to Apple, just was as well curious if one amongst you have the same problem.
Thanks for the help

Problem solved!
I think this issue is a mixture of conflicted apple IDs giving problems on the apple server but also conflicted and / or damaged permissions on my MacBookPro. Here is what I did:
First of all I followed the instructions in this link:
How to find out if you have multiple Apple IDs
It seems like a strange set of instructions because it is asking you to find out if you have an apple ID when you know you have one! Part of this process will also involve re setting your password which also seems strange because loosing your password was not the problem. However if you follow the instructions you end up with a page which in my case showed that I had two apple IDs using the same e mail address. It was this conflict that was causing the problems. The solution is therefore to change e mail addresses so there is no overlap of e mail addresses between accounts.
For some people this has been enough to solve the problems. However for me one of my accounts would still not work.
On another thread I had been advised to repair permissions which I had done from disc utility but it had not helped. However on OSX daily I read..."In mac OSX Lion repairing permissions from the Disk Utility app doesn’t repair the users file permissions"! Hmm nice one Apple- reparing permissions does not repair permissions! It seems that you have to use disc utility from recovery mode.
I then followed these instructions on OSX daily (dot com)
Repairing a Mac Boot Disk with Disk Utility & OS X Lion
Reboot the Mac and hold down Command+R (To boot into recovery)
Select “Recovery HD” at the boot menu
At the Mac OS X Utilities screen, select “Disk Utility”
Select the boot volume or partition from the left menu and click on the “Repair” tab
Repair Disk is now possible, click on “Repair Disk” to repair the boot volume
Now verify disk permissions and repair them
And bingo both accounts work!

IMessage and Facetime Not Working - Cannot Log Into Apple ID.

Hello,
Some background: iMessage and Facetime are not working. Both applications are saying that I am not typing in the correct password for my Apple ID. Needless to say, the applications are wrong and I am using the correct password.
Some background:
1) This is an iPhone 5.
2) It is running iOS 6.0.2.
3) I am on Verizon.
4) I am located in the continental US.
5) I have a full e-mail address for my Apple ID username.
6) iMessage and Facetime are both working on my iPad, using the same login information.
7) All other applications that use Apple ID, such as the App Store, are not having this type of log in issue.
8) This issue occurs regardless of whether I am connected to wi-fi or just the mobile carrier, or both.
Troubleshooting I have tried to fix this issue:
1) I have changed my Apple ID password. This did not work.
2) I have changed my Apple ID username/email. This did not work.
3) I have played around with Date/Time setting changes. This did not work.
4) I have reset all settings. This did not work.
5) I have tried hard restarts of the phone. This did not work.
6) I have performed a restore from backup of the phone. This did not work.
7) I have performed a full factory restore of the phone. This did not work.
Apple Support is at a total loss on how to fix this. I have now had multiple frustrating phone support sessions with them with zero results. If you do some searching, it appears there is no way that anyone knows of to fix this issue once all the troubleshooting I have listed above has failed. People have had to acquire brand new phones in order for these applications to work again.
Obviously this is unacceptable.
There are a lot of smart people on these forums fixing tech issues like this. Anyone have any input?

randers4, thank you for the suggestions.
1) I have contacted Verizon and they are not blocking "premium" or 3rd party text messages.
2) The Apple ID login issue occurs regardless of wi-fi network location, or even if I am not on wi-fi at all. Router settings are irrelevant to this problem.
3) I have already played around extensively with date and time settings. This did not fix any issues.
Any other suggestions? I had another call with Apple support and they are of the opinion that I may need to have the phone totally replaced, which is unacceptable unless it is free of charge.

Cannot log into Apple Support Communities with Safari

This has just started happening to me in the last few days - glad I kept firefox on the iMac - and I see that it has happened at least once before in 2009 but the link to fix it does not work (and I have only letters in my name).
When I enter my log in info and press log in, it gives me the text below.
Looking for something in Apple Support Communities?
The page you tried was not found. You may have used an outdated link or may have typed the address (URL) incorrectly.
Please visit the main page of Apple Support Communities for links to discussion areas.
Once I see this page, when I go back to Support main page and select Apple Support Communities icon or Join the conversation, I get the same page each time.
Any suggestions would be appreciated.
Thanks

aloha bob
It just now happened to me too - even quitting FF and trying again was futile. I tried so many avenues that I think the glitch went away while trying this and that. It may be fortunate that Jive coders are responsible for the SiteWare with all the brouhaha over 8x and BASH hitting at the same time. My Aggies pulled out a miracle comeback this afternoon
CCC

I cannot log into my account

I just setup an account and I cannot log into it

Hello yhinricks:
What account are you trying to excess HP eprint or HP Support web site? Both of them you need to use your email account you used to register your old printer. Now with HP e print account your printer won't receive directly prints that was sent to your old printer because that was sent to your old printer's IP address. So you need to go on line and manually print items that are their using the printer's icon on your Internet Explorer Browser. For the time being and contact HP e print suppot technician. Ask them how to change your old printer's information (IP Address) to your new printer's information (IP Address). So you do not have to log into your account each time to manually print from website. frrw

Trying to install Elements13, Cannot log into Adobe, Just sits an spins

Purchased Elements 13, willl not install because cannot log into adobe website ???

You can create an Adobe ID by going to https://www.adobe.com/cfusion/membership/index.cfm?nf=1&nl=1&loc=en%5Fus
This can also be done from the BAM App.
The authorization is necessary to use the Adobe DRM copy protection S/W.
I didn't have a problem doing the authorization on my iPad. What error are you encountering? Perhaps the Adobe server was unavailable?

Connecting Harmony Hub to Apple Dual Band Router

It appears that the Harmony Hub only connects to 2.4 ghz and my dual Airport Extreme, although it sends out both 5 and 2.4 doesn't work with it. If we can't find a work around one thing we are considering is whether we can add a second (2.4ghz only) router to the network either directly to the modem or as an extension of the network. I'm a little (a lot) over my head on this stuff so would appreciate any suggestions or approaches. thanks

Hi @SP-Michigan ,
I see that you are experiencing issues with setting up the printer over the network on the Comcast Dual Band Router.
I will do my best to help you.
Restore the factory settings on the printer.
Press the OK button on the printer, go to service, then select restore defaults.
Print a configuration page from the printer to make sure the IP and SSID are cleared.
Most likely it is the settings on the router that might need to be changed.
If it is set to 5 GHZ network you may need to change to 2.4 GHZ. (rename the 5ghz or shut it off)
You might also have to set it to WPA personal.
The WPA key setting needs to be on AES to work correctly not TKIP.
Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from configuration page.
You might need to contact Comcast for further assistance to check those settings.
I have provided a document for setting up the wireless connection or you can follow my different methods provided.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Ipad push applications on Apples Dual band router - Help

All, why are my push apps not pushing when I'm connected to the Apple dual band router, internet works fine though? Funny thing is at my moms house it pushes fine with her cheap netgear. Can someone with a dual band and push working on your iPad please provide what settings you used on the router ? Is it best to just a separate name for 5ghz ?
Its been so hard to find help on this. Thanks

I am also finding streaming (from YouTube) to be poor both on wifi and 3G. My first gen iPad had a lot of problems, but streaming was never one of them. Signal strength is good and I haven't changed any network hardware or settings.

Problem connecting 1525nw to Comcast Dual Band Router

I recently got a new Comcast Dual Band router. Since then I have not been able to connect my HP 1525nw wireless printer to the network. Have tried all methods, WPS, PushButton, Pin, installation thru HP drivers, resetting to factory defaults etc.......any suggestions?
BTW - the printer was connected earlier to the Comcast Single Band router. It used to work just fine then.

Hi @SP-Michigan ,
I see that you are experiencing issues with setting up the printer over the network on the Comcast Dual Band Router.
I will do my best to help you.
Restore the factory settings on the printer.
Press the OK button on the printer, go to service, then select restore defaults.
Print a configuration page from the printer to make sure the IP and SSID are cleared.
Most likely it is the settings on the router that might need to be changed.
If it is set to 5 GHZ network you may need to change to 2.4 GHZ. (rename the 5ghz or shut it off)
You might also have to set it to WPA personal.
The WPA key setting needs to be on AES to work correctly not TKIP.
Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from configuration page.
You might need to contact Comcast for further assistance to check those settings.
I have provided a document for setting up the wireless connection or you can follow my different methods provided.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Dual band router that ipad will stay connected with

Is there a dual band router that ipad3 will stay connected to

My son-in-law uses a Netgear model WNDR3700-100NAS Dual Band Router. I just bought one but it hasn't arrived yet. This router is compatible with the iPad: 802.11a/b/g/n, supports 2.4 GHz and 5 GHz, supports WPA2 encryption.
I have ATT UVerse, but the UVerse router range is quite low. I bought a wifi repeater, which increases the range somewhat. The output from the UVerse will be plugged in to the Netgear router.
 Cheers, Tom

Computer doesn't see second channel in Dual Band router

I have just purchased a Cisco Linksys simultaneous dual band wireless N gigabit router (model WRT610N-EU).
The router has two channels, 1) linksys and 2) linksys_media. Both my computer and my TV see and connect without problem to linksys. However, my intention with the dual band router what to have one channel for my laptop and one for the TV. Unfortunately, neither see the linksys_media channel. What is strange is that a visiting friend was able to see both channels on his laptop. So why don't I?
Is there a compatibility issue here or am I doing something wrong?
BTW, my laptop is less than six months old and is running Windows 7 (newer than my friend's laptop). The TV is a top of the line model and two months old.

Most likely your devices don't support the 5 GHz band. Check the specifications of the wireless adapters in your wireless devices.

IPad Air: stumped by streaming problem on dual band router

I have a dual band router at home. My iPad Air will stream very poorly when connected to the 5 GHz band. By streaming, I mean Netflix, Crackle, etc. Everything works fine if I connect to the 2.4 GHz band. The strange part is that my old iPad One streams fine from either band. Even stranger, downloading stuff like apps or magazines works fine with the iPad Air on either band. The problem is only with the iPad Air when streaming on the 5Ghz band. Any one else has this problem?

I am also finding streaming (from YouTube) to be poor both on wifi and 3G. My first gen iPad had a lot of problems, but streaming was never one of them. Signal strength is good and I haven't changed any network hardware or settings.

Extend an AE dual-band router with a 2nd AE dbr: will automatic mode work?

I have a new Apple Extreme dual-band router, and it works just great. My N devices all get the maximum bandwidth, and the G devices connect easily as well. I have a section of my house that gets weak reception, and want to extend the network with a second router.
If I bought a second Apple Extreme dual-band router, and configured it to Extend Wireless Network and Allow Wireless Clients, could I then leave it on the default radio mode of Automatic? It seems like either router would then be able to tell if the wireless clients were N or G, but communication between the routers would be N. I want to keep the maximum bandwidth for my N devices.
Thanks in advance

I have a new Apple Extreme dual-band router, and it works just great. My N devices all get the maximum bandwidth, and the G devices connect easily as well. I have a section of my house that gets weak reception, and want to extend the network with a second router.
If I bought a second Apple Extreme dual-band router, and configured it to Extend Wireless Network and Allow Wireless Clients, could I then leave it on the default radio mode of Automatic? It seems like either router would then be able to tell if the wireless clients were N or G, but communication between the routers would be N. I want to keep the maximum bandwidth for my N devices.
Thanks in advance

Cisco 2500 dual band router. the hp printer is connects on one band, pc the other help

Cisco 2500 wireless router Dual Band N, HP PhotoSmart C309-g, Windows 7
PC cannot find the printer because it connects on a different band. Cisco uses the same name for both bands. How do I get both devices on the same network.

I also have a dual band router, Cisco's LinkSys EA3500 N750; and the 5.0gHz band is necessary to avoid interference with other equipment operating on 2.4gHz. I put TP-link 2.4/5.0 gHz adapters on each PC (one HP another Sony, both a few years old) and the PCs now work fine, no loss of internet/network access. Would that solution also work for the printer? The printer does not recognize any network (even though the 2.4gHz shows as available and strong on the TP-link device. I used the same name and security code for the new router as the old; again, neither PC had a problem finding it.

Just installed dual band router/wifi, cannot log into Apple ID.

Similar Messages

Maybe you are looking for