Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?

Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

Similar Messages

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

What you should have done is immediately turn the phone off, then put it in a ziploc bag of dried rice after you wiped all visible moisture off the phone. Leave it in the ziploc bag for 3 ~ 4 days, then turn it on & hope things work OK. It may be too late to try the dry rice trick now, but you can give it a shot if you like.
Apple does have an out of warranty replacement program, cost in the US is $199 for the 4S & $149 for other models.

I recently backed up my iPad and then I restored it to factory settings. Now, I want to restore it from the back up that I created, but it will not accept my Apple ID password. Is there any way that I can save my data?

Hi,
As I have said in the title, I was supposed to do a restore on my iPad for work. I backed up the device and then I restored it to factory settings as I was instructed. Now that all of that is complete, I tried to restore it from the back up point I created and it will not recognize my Apple ID password. I really hope that I won't lose all of my data, but I don't know what else to do. I have tried entering my password numerous times. I really hope that someone can help me.

Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

What is a disk serial number and where can I find it on my Mac?

I'm trying to gain access to a Software program that requires a disk serial number to generate a license. Where can I find this information?

Apple Menu > About This Mac > More Info... > Hardware Overview.
See if the Serial Number or the Hardware UUID satisfies their requirements. Both are unique to your Mac.

I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. Is there anything I can do to get it back?

I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. This is the same with many other apps as well and not just temple run. Is there anything I can do to get them back?

So, you need an older version of the iOS app, because the current version no longer works on your iPod touch.
If you do regular backups of your hard drive (as you should), such as by using Apple's built-in Time Machine (if you use a Mac), you may find the older version of the app in the backup archive, and restore it (replacing the newer version). They are stored in the iTunes Media folder, in the Mobile Applications sub-folder. You should then be able to sync the older version to your iPod touch.
I can't think of any other way to get it back...
NOTE: An 2nd gen iPod touch can run up to iOS 4.2.1. If your iPod touch is running something earlier, and that is why the app no longer works, you can also consider updating the iPod's iOS.
I use an even older iPhone (original). I avoid this potential problem by aways updating its apps on the iPhone, not in iTunes on the computer. When I do it on the iPhone, it will not download a newer version of an app that won't run on my old iPhone.

I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???

I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???

Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott

I just downloadeId the ios 6.1 and all of my contacts disappeared. Is there anything I can do to get them back?

I just downloadeId the ios 6.1 and all of my contacts disappeared. Is there anything I can do to get them back?

Assuming that you backed up prior to deleting your contacts, navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.
The difficulty in restoring iCloud data from a back up is that the back up is older than the current version on iCloud and anything that is restored gets removed again when an iCloud sync occurs.
Ensure the device is connected to your local network.
Start the restore from iCloud back up.
Allow the devices settings to restore (watch for the confirmation of completion).
As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
Wait for the time out confirmation.
Navigate to settings > iCloud and turn off contact syncing (keep contacts when prompted).
Reconnect the router to the internet and let the restore process complete.
Delete any iCloud contacts from iCloud.com on a computer.
Navigate to settings > iCloud and turn on contact syncing (merge contacts when prompted).
May I suggest that you carry out a back up to iTunes before you try anything, that way should things become even worse, you can at least restore back to where you are now.

HT4623 I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone

HT1349 The photo option in ICloud on my computer will not activate (it is grayed out as an option). Any assistance in getting my photos from my incloud on my iphone and ipad to my computer

The photo option in ICloud on my computer will not activate (it is grayed out) after I load the Icloud download. My Ipad and iphone are sharing my photo stream photos but cannot get to my computer. I read all the instructions and reloaded Cloud 2 x but again will not activate the photo sharing piece.

I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

My mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

Here:
http://support.apple.com/kb/HT1861

HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc

My iphone 3GS will not type letters properly. I cannot tap on y - it gives me t or u.If I just hover above the return key it will time out 3 lines of gobbledegook. Any suggestions please?

My iphone 3gs will not type properly. I am unable to tap on y - it gives me t or u.If I just hover above the return key if will about 3 lines of J,N and L!!!! Has anyone any idea about how I can sort this out?

Tap Settings > General > Reset > Reset All Settings. All your preferences are reset, but your data and media aren’t deleted.

Where can I find mac OS X server serial number, i am trying to set up a new mac mini server

where can I find mac OS X server serial number, i am trying to set up a new mac mini server

You should find a card (size like a cd jacket) with serial no. It should be put all together with an installation DVD and user manual etc.

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Similar Messages

Maybe you are looking for