JVM specifications for package-info synthetic interface

Hi,
I have several questions about the synthetic interface.
1) javac doesn't tag it as synthetic. Why?
2) Why do we need it if the package declaration is tagged with an annotation for which the retention is RetentionPolicy.SOURCE. The .class file won't have any visible or invisible runtime annotations in this case, so why do we need a .class file?
3) Where can I get an update specs of the chapter 7 of the JVM specs?
Thanks,
Olivier

This is the wrong forum. Generics don't mean generic
questions, it mean generic types aka parameterized
types.
1) javac doesn't tag it as synthetic. Why?It doesn't really matter. It is not a valid Java indentifer, so
it must be synthetic. However, it would probably be a good
idea to mark it synthetic. I have created RFE 6232928. It should be
available on this URL in a day or two:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6232928
2) Why do we need it if the package declaration is
tagged with an annotation for which the retention is
RetentionPolicy.SOURCE. The .class file won't have
any visible or invisible runtime annotations in this
case, so why do we need a .class file?I guess you can just delete it if you don't need it.
3) Where can I get an update specs of the chapter 7
of the JVM specs?I think the latest public draft is here:
http://www.jcp.org/en/jsr/detail?id=924
However, I think that this page will soon have
something newer:
http://java.sun.com/docs/books/vmspec/index.html

Similar Messages

Make A headphone mix for vocalist using saphirepro14 interface

Hi. Can someone tell me the best way to set up a headphone mix in logic x. I have a saphire pro 14 interface and was wondering what the best way to be able to increase/decrease volumes of headphone mix for vocalist while not affecting the level of the overall mix. Any ideas or techniques would be greatly appreciated...i have seen videos talking about bussing out sends, but was wondering if there is a better way or anything more specific for the saphire pro14 interface...thanks

Here's an (admittedly busy) example of how I do it:
Note that all of the MON1 sends go to the channel strip marked Mon1(9). The output of this bus goes to Pamp1 (RED - right after the stereo outs), which is actually my RME's output 3&4. I labeled in Pamp1 or Phamp1 (sorry for the inconsistency) because that physical output goes to one of my headpone amps.
Just for additional info, the output (RED) marked 'Phone B' goes directly to my RME's embedded headphone output (which happens to be output 9&10 on my RME).
Hopefully this didn't confuse things further.

Specific Values in Info Package

Hi All,
I want to load the data into BW by giving the specific values in Info Package Level.
For example i want to load data for a sales number = 1,6,10,2000 etc. Instead of giving the intervals, i want to load the data specific to the sales Order Number
I have seen From and TO values over there. Can i write any ABAP Code to pull the data by hard coding the above values over there.
Pls suggest.
Thanks,
Jelina.

Hi,
You can achieve it in both the ways.
You can hardcode in the infopackage through multiple single values instead of range.
Please the cursor on the Sales Order number and Click the green color '+' button.
It will create an additional line. You can enter the second Sales order number.
You can also write an ABAP routine.
But if the sales order numbers are available, then it is better to enter in the data selection sceen.
Thanks.

TS3074 While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

Perhaps the answer provided for this problem in Microsoft's forums will help.
Good luck.

How do I know which iTunes area to use to transfer info from my old iPhone to my new iPhone? There are too many iTune areas specific for music or movies, etc. none specified for iPhone transfers.

Which iTunes area do I access to transfer my info from my old iPhone to my new iPhone? Music, movies, iU? I don't see any specific for iPhone transfers.

Thanks for your reply but maybe it would be helpful if you could elaborate a bit on that or maybe I was not clear enough in my question. What I need to do is NOT stop using icloud. But gather everything that is already stored in my old icloud account (X) and save it in my device (iphone, ipad etc) and then continue using icloud but with my new account (Y).
In a scheme:
"->" = "becomes"
Step 1) data from X -> independent device data, and then the X account is removed from the device while the data stays.
Step 2) account Y is added to the device.
Step 2 continued) now the device has a. "the independent device data" that was drawn from the account X and b. the litte piece of data from Y that I have already created.
Step 3) independent device data -> data in account Y (along with everything that is created from now on, and everything that has been stored there. The little piece mentioned above.) Everything should now be merged in Y. Merged in a "good" way. Not overwritten, not deleted etc. Nothing should be lost (old or new, from the device or from X or from Y).
The last step is kind of optional. If the best I can get is having data associated to Y (future and past) AND "independent device data" that is so independent to the point that it cannot be added to my Y account since icloud recognizes and stores only data that is created after the account's addition to the device, then I can deal with that.
I hope I cleared everything out.
I need my notes and pages documents from my old icloud account to become independent device data and just stick to the device. And then, if possible, be uploaded to my new icloud account.

Function module that runs for every info package

Hi,
Please can you give me name of function module that runs for every info package irrespective of data source.
Cheers,
Reddy.

use below function module
RSSM_SDL_START_INFOPACKAGE

[svn] 1548: Added @exclude to Javadoc package-info file for this package.

Revision: 1548
Author: [email protected]
Date: 2008-05-03 03:48:18 -0700 (Sat, 03 May 2008)
Log Message:
Added @exclude to Javadoc package-info file for this package.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/cluster/package-info.java

nbd wrote:
How could one interpret this?
[root@kw etc]# checkupdates | grep pcre
pcre
[root@kw etc]# pacman -Si pcre | grep Version
Version : 8.37-1
[root@kw etc]# pacman -Qi pcre | grep Version
Version : 8.37-1
[root@kw etc]#
Ok, after updating your original post and asking this question I understand what you are actually trying to do. The "local package database" generally refers to /var/lib/pacman/local, not /var/lib/pacman/sync, which is why it was unclear.
fakeroot pacman -Syb /tmp/tmpdb -i pcre
should do what you want, but be very careful never to install anything using that temporary database. Take a look at the checkupgrades script to see how it does things if you want to do more than just check remote package info.

Problem with "package-info.java" using EJB 3.0 and OC4J

Hi all.
I already posted this question on JDeveloper forum, but didn't get any answer,
so I'll try posting here.
Anyway, I'm new both to JDeveloper and J2EE,
so I'm trying out examples for EJB 3.0, and I got stuck at "Use Security Annotations with EJB 3.0"
(http://www.oracle.com/technology/tech/java/oc4j/ejb3/howtos-ejb3/howtoejb30security/doc/how-to-ejb30-security-ejb.html).
Example code is working perfectly, if one builds it using Ant, but I'm importing all examples into JDeveloper (or at least I'm trying to :))
JDeveloper can't build file "package-info.java" containing following code:
@javax.annotation.security.SecurityRoles(roleNames={"superuser", "user"})
package oracle.ejb30;I'm getting following output in "Compiler - Log" window:
Error(2,1): 'class', 'interface', or 'enum' expected.
Help much appreciated...
platform used:
Windows XP SP2
JDeveloper Studio (Version 10.1.3, Build 3412)
JDK 1.5_06
OC4J 10.1.3 developer preview 4 (standalone version)

Since you're using EJBs, you can use JTA and can skip the getTransaction() calls. If you want to use getTransaction().begin() and commit(), then make sure that your EntityManager is resource-local. The configuration for this is in persistence.xml. Set a transaction-type of RESOURCE_LOCAL rather than JTA.

Are the fonts installed with the Mac OS OK to use for commercail use? ie, a logo which willbe used for packaging, TV broadcast and internet.

Are the fonts installed with the Mac OS 10.6 OK to use for commercial use? ie, a logo which willbe used for packaging, TV broadcast and internet.

srjeffgr wrote:
Some font foundries require extended licesnes for different uses.
You're welcome. Again, as mentioned in that discussion, you can use Font Book to check if the foundry has entered any license limitation notices in the font info (Preview > Show Font Info).
Basically, fonts are code. The copyright applies to the code. If the product you distribute doesn't include the code, then the copyright does not apply to it. That's why embedding has to be dealt with specifically, because embedding fonts in a document means including the code or parts of it in the document.

Conflict checking issues for package

Trying to install SMCsubv144 on a server in the global zone. I get the following:
root@xxxxxxx(pts/3):/tmp# pkgadd -d ./subversion-1.4.4-sol10-sparc-local
The following packages are available:
1 SMCsubv144 subversion
(sparc) 1.4.4
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx1>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx2>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx3>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx4>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx5>
## Verifying package <SMCsubv144> dependencies in zone <xxxxxx6>
Conflict checking issues for package <SMCsubv144> on zones <xxxxxx1, xxxxxx2, xxxxxx3, xxxxxx4, xxxxxx5, xxxxxx6>.
Do you want to continue with the installation of <SMCsubv144> [y,n,?] n
Installation of <SMCsubv144> was terminated due to user request.
When I choose y to continue, I get into a loop of the following questions:
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/bin <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/doc <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/include <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/lib <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man <package> on SMCsubv144 <zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man1 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man5 <package> on SMCsubv144
<zone>
Do you want to continue with the installation of <SMCsubv144> [y,n,?] y
attribute change for /usr/local/man/man8 <package> on SMCsubv144
<zone>
and that goes on and on until I answer n. And never specifies which zone it's talking about...just <zone>.
I've successfully installed the same pkg on a non-zoned server. Also tried SMCsubv143 and got the same error. So the pkg is ok, it appears a problem with the zones and/or /usr/local.
Thanks for any info.
mk

You could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default

Since 1.5: Multiple sources of package comments found for package

SInce I upgraded to JDK 1.5, I get these warnings
Multiple sources of package comments found for package "x.y.z"
for my package comments. Did something change for package.html content?

I already have them in the sources ...Ok, but are you sure that the Javadoc classpath option does not also point to directories with package html files?
It works without warnings, when using 1.4 ... these warnings appear since using 1.5.Yep. The Doclet interface of the Doclet API specifies a method void setRawCommentText(String text) prior to 1.5 this method did exactly what its name implies. With 1.5 the implementation was changed to generate a warning and do nothing if it was attempted to set the comment text multiple times.
What happens is this:
Javadoc sees the package.html files in the sources, creates an appropriate Doc (PackageDoc) instance and sets the comment text. Then for some reason Javadoc encounters package.html files for already existing Doc instances and tries to set the comment text a second (third, fourth, ...) time.
So, all you need to do is to ensure that Javadoc parses the package.html file for a given package only once, i.e. ensure that only sourcepath points to the package.html files but not classpath.

Annotations: package-info.java

In Eclipse IDE I do the next thing:
@MyAnnotation
package annotations;
@interface MyAnnotation {
}And Eclipse tells me that Package annotations must be in file package-info.java. In Java Language Specification I didn't find something about file package-info.java. Where I can read something about it?
What is the syntax of the file package-info.java. Maybe you have an example?

http://java.sun.com/docs/books/jls/third_edition/html/packages.html Discussion of Section 7.4.1.1

Jvm specification . The questions again !!!

hello professor.
Iam new to the field of robotics and embedded system design and programming i need to know some basic informations from you .
first i had developed some microcontrollers from microchip in basic (picbasic Pro) compiler and some assembly coding.
but i saw some companies like
http://www.ridgesoft.com
made an environment (Editor) that i can develop their own microcontrollers like Intellibrain and Sumoii in java and this editor which is called roboJDE gives me the following facilities:
1) i can program writing java code syntax using their own packages && classes for some serial and hardware programming like accessing pins && EEProm and alot of these things in java and then my project compiled into .class file containing the bytecode and also .hex file containing INTEL HEX representation of my code of java then i can use any programmer software to feed this .hex file into the microcontroller itself without running any jvm inside the hardware of the microcontroller itself.
my question here is :
A) How can i convert my java project into (.hex file that represent my java code ) specific for the instruction set of microchip microcontrollers family of 16F8X microcontrollers?
B) i want to design my own jvm to run on 16F8X family to accept files .class containing the bytecode directly . What are the requirements for me to design this specific jvm for these microcontrollers family of microchip according to their instruction sets?
Knowing :
I had read (java virtual machine specification second edition) which is called the blue book ,
But i still don't know From where can i begin and what tools i must have to begin programming this jvm to install it into the microcontroller to accept bytecode file .class directly ?????
Thanks
Yours;
Snouto;

EJP wrote:
Buy the book. If the specification is critical for your work you're crazy to rely on an online source.True as it might be, it actually looks like Oracle seriously broke some of the references on their own site. For example http://www.oracle.com/technetwork/java/javase/documentation/whitepapers-jsp-139357.html is pointing to http://java.sun.com/docs/books/jls/index.html which results in 'Sorry! We couldn't find your document.'
To the OP: googling for Java virtual machine specification lead to enough sites providing the book as an online resource or as an ebook.

Recipe workbench for packaging development purpose

hi
i am looking for information about using recipe workbench for packaging development.

Anand,
We have set up 20 different packaging specification types, each with its own property tree. All of our current and in-development packaging is contained within RM. You will want to use the specification workbench to manage your types and the properties you need to capture.
How RM interacts with other modules can be very complex. There is an existing EHS/QM interface which can be used to create incoming inspection plans for receipt at a loading dock. We weren't happy with the default and did some custom development to make the interface work better for us.
If you use RM for recipe development, you can use your packaging specifications as inputs and outputs to general and site recipes - there's a lot of configuration involved. If you transform those recipes, then the packaging specifications will link to materials and appear in the master recipes. Also, any QM data entered into those recipes will become part of the in-process inspection plan at the plant.
Another interface point is using Trial Management. We have not activated this yet, but it can be used for managing any testing, including packaging development. Stability studies may be useful as well.
Sorry to be so general, but I'm having a hard time figuring out exactly what information you need. You may want to check the SAP OKP (online knowledge products) in Service Marketplace related to RM, as well as the standard documentation available.
Keep me posted.
Beth Perry

How to query package info from the server repo instead of local DB?

Greetings!
Is there an option in pacman to query the package info ( like -Si ) from the server repo instead of the local package database? Or maybe some additional program is needed for this?
Update: Maybe this can be done by downloading a fresh copy of package DB with -Sy, but how to specify a custom package DB file? Is this accomplished with --dbpath option? Say
pacman -Sy --dbpath /tmp/tmpdb
Last edited by nbd (2015-06-07 18:44:23)

nbd wrote:
How could one interpret this?
[root@kw etc]# checkupdates | grep pcre
pcre
[root@kw etc]# pacman -Si pcre | grep Version
Version : 8.37-1
[root@kw etc]# pacman -Qi pcre | grep Version
Version : 8.37-1
[root@kw etc]#
Ok, after updating your original post and asking this question I understand what you are actually trying to do. The "local package database" generally refers to /var/lib/pacman/local, not /var/lib/pacman/sync, which is why it was unclear.
fakeroot pacman -Syb /tmp/tmpdb -i pcre
should do what you want, but be very careful never to install anything using that temporary database. Take a look at the checkupgrades script to see how it does things if you want to do more than just check remote package info.

JVM specifications for package-info synthetic interface

Similar Messages

Maybe you are looking for