JWS not downloading updated files first time

We are experiencing a problem where JWS does not download the modified files when the application is launched the first time after the jar files were updated. When user launches it again, it gets the updates.
This seems to happen mostly for users in remote locations (though not for all such users). For local users the frequency is much less.
Any thoughts?
Thanks,
Raman.

If the application has the offline-allowed specified,
javaws has a timeout mechinism when checking for updates before launching an app. (i believe it's 1+1/2 seconds). If javaws cannot determine before the timeout if an update is needed, (and offline-allowed is specified) it will run the cached version, and continue checking in the background.
Then when you run next time, the background checking will by then have determined an update is avail, and you will have to download before launching.
/Dietz

Similar Messages

WSUS in Windows Server 2012 R2 is not downloading update files.

I'm not using Proxy server and this is the only WSUS server in our environment and update source is to sync from Microsoft Update site.
Synchronization completes successfully and every update files is not downloading. When I look at the download status from the main page, it said it downloaded, but when I look at the files from updates folder, it said failed to download.
I'm getting following error messages:
Content file download failed.
Reason: The server does not support the necessary HTTP protocol. Background Intelligent Transfer Service (BITS) requires that the server support the Range protocol header.
Source File: /c/msdownload/update/software/crup/2013/12/windows8.1-kb2903939-x64_a8ae5dc28899c892b46c9aa9c8aa71e2d3961a79.cab
Destination File: e:\wsus\WsusContent\79\A8AE5DC28899C892B46C9AA9C8AA71E2D3961A79.cab
John

Hi,
This is most likely a problem with a proxy server or firewall. Since you don’t have a proxy server, then firewall could be the culprit.
Error message when you try to download a file by using the Background Intelligent Transfer Service: "Content file download failed"
http://support.microsoft.com/kb/922330
Make sure your firewall support HTTP 1.1 range requests. If it still doesn’t help, try the following workaround:
If you are unable resolve this issue from the proxy/firewall side, then try these steps as a workaround on the WSUS server,
Set BitsDownloadPriorityForeground=1 using osql.exe on WSUS SQL instance.
net stop WSUSservice
CD "%ProgramFiles%\Update Services\tools\osql"
osql.exe -S <SQL instance name> -E -b -n -Q "USE SUSDB update tbConfigurationC set BitsDownloadPriorityForeground=1"
net start WSUSservice
Original post in this
blog.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.

I can not download updates

I can not download updates , via some time of downloading ,it quits and I see inscription saying no one of updates cannot be downloaded ,there is any mistake or manipulation might be, try download later. And so 10 times of trials to download (Air Port,iTunes,something else )
What can I do?
Macbook pro 2011 Lion.
Thank you for your time

In Console I have got this report . What can I do ?
Feb 23 05:30:25 TIA Software Update[2181]: JS: 10.7.5
Feb 23 05:30:26: --- last message repeated 1 time ---
Feb 23 05:30:26 TIA Software Update[2181]: JS: Firmware is up to date.
Feb 23 05:30:27: --- last message repeated 1 time ---
Feb 23 05:30:27 TIA Software Update[2181]: JS: model = MacBookPro8,1
Feb 23 05:30:27 TIA Software Update[2181]: JS: 10.7.5
Feb 23 05:30:42: --- last message repeated 4 times ---
Feb 23 05:30:42 TIA Software Update[2180]: Acquired Lock: 501, 2181, 0
Feb 23 05:30:42 TIA Software Update[2180]: Releasing Lock: 501, 2181, 0
Feb 23 05:30:45 TIA Software Update[2181]: Calculated need 1867.890 MB; 318269.399 MB free; 318269.399 MB available with MTM reclaim
Feb 23 05:30:46 TIA Software Update[2180]: Acquired Lock: 501, 2181, 0
Feb 23 05:31:57 TIA Software Update[2181]: 041-7212: Failed post-download size check for package "AirPortUtility.pkg": expected 21000445, got 22000498
Feb 23 05:32:38 TIA Software Update[2181]: 041-8574: Failed post-download size check for package "JavaEssentials.pkg": expected 15491032, got 15533990
Feb 23 05:32:53 TIA Software Update[2181]: 041-9609: Failed post-download size check for package "RAWCameraUpdate4.pkg": expected 5098149, got 5022418
Feb 23 05:33:21 TIA Software Update[2181]: zzzz041-9792: Failed post-download size check for package "MobileDevice.pkg": expected 11171841, got 9361776
Feb 23 05:33:21 TIA Software Update[2180]: Releasing Lock: 501, 2181, 0
Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 3) (SUSessionErrorDomain code 3)
Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 4) (SUSessionErrorDomain code 4)
Feb 23 05:33:21: --- last message repeated 1 time ---
Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 3) (SUSessionErrorDomain code 3)

Aria2 does not download multiple files at a time

I'm trying to speed up my system upgrades by using aria2, but it won't speed up anything as it does not download multiple files at a time.
As per this wiki post, https://wiki.archlinux.org/index.php/Im … erformance , "using aria2", I've installed aria2 and added the line
XferCommand = /usr/bin/aria2c --allow-overwrite=true -c --file-allocation=none --log-level=error \
-m2 --max-connection-per-server=2 --max-file-not-found=5 --min-split-size=5M --no-conf \
--remote-time=true --summary-interval=60 -t5 -d / -o %o %u
to the options section in pacman.conf. Pacman still works, but it isn't sped up. When pacman -Syu'ing, a normal line shows:
#1 SIZE:1.3MiB/2.0MiB(63%) CN:1 SPD:50.0KiBs ETA:15s
What's going on?
P.S. I use the line reflector -l 5 --sort rate --save /etc/pacman.d/mirrorlist before doing a system upgrade.
Last edited by bruno321 (2011-05-15 15:27:45)

Using aria2c will download files over 5MB with multiple connections but will not download multiple files at the same time. Pacman calls aria2c with the first url, waits for it to finish, then calls aria2c with the second etc...
If you want to download multiple packages simultaneously, see http://xyne.archlinux.ca/projects/pacman2aria2/

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Safari could not download the file because there is not enough disk spacr

safari could not download the file because there is not enough disk space I have a 1TB hard drive and only use a small amout of space.Mac os x mountain lion (12.8.2), HD 978.59 free out of 999.35GB.Please help Brenton

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

IPad App Store not downloading updated apps

I have an iPad 3 64GB that has been updated to iOS 8. In the last two days, the App Store will not download updated apps. It shows them with a red number, but when I click on Update, I get the circle with a square in the middle but then nothing proceeds. If I go to the individual app, it says "waiting…" but if I click it, it does not change to "paused" as it used to when waiting was shown.
My iPhone 5S is not having a problem, nor is iTunes on my computer.
Sometimes, if I sync the iPad with iTunes, the updated apps will copy over to the iPad, but not every time.
I have done a forced restart on the iPad and have also done a Reset All Settings under the General setting.
It appears that something has gone wrong with the App Store app. Does anyone have a suggestion as to how to fix this short of restoring the iPad to new status and reinstalling everything?

Hi,
Try deleting the apps with the issue from iTunes, and then download and update them again.
This article: http://support.apple.com/kb/TS1702 provides additional tips for troubleshooting issues with applications.
-Jason

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Safari could not download the file "iTunes12.0.1.dmg" because there is not enough free disk space.

Safari could not download the file “iTunes12.0.1.dmg” because there is not enough free disk space. How do i resolve this issue?

From the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If there is a closed padlock icon in the lower left corner of the preference pane, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON. Close the window.
Restart the computer. Try the download again.

"This task could not be updated at this time" Error in Outlook 2010 on Workflow Form

Hi,
I have setup a workflow to send task notifications to users and am getting an error when attempting to act on the InfoPath based workflow task form that appears in Outlook 2010 when clicking on the "Edit this task" button. After clicking Approve, the
form disappears, but after a few seconds a dialog box appears that says:
"This task could not be updated at this time"
The funny thing is that the task actually does get updated, but there is often a delay in doing so. Does this warning appear because the server has a backup of workflow items to deal with? I saw that in 2007 it meant something wasn't properly
installed with InfoPath, but I am not sure if that is the case here or not. Any guidance would be appreciated.
I am using Office 2010 and SharePoint Server 2010.

I have the same issue. If I had to guess it's because the workflow in question goes stale and has to recompile, thus it times out on the client even thou it gets submitted to the server so it eventually processes.
Now either they need a longer time out fix, or we need some way to keep the workflow actively in memory somehow on our end for it to not do it. Preferably the longer timeout method would be best to save on ram, but I bet in bigger environments or workflows
that get used often this won't be the issue.
You can pretty much reproduce this if you have 2 tasks from the same workflow, the first one will give the error. then after that if you wait a minute for the workflow to get going, then close your 2nd task, it will be instant. So it's something with the
way it's getting garbage collected and having to recompile that's causing this delay with the client and a timeout just needs extended or something to give the server a chance to finish loading up the workflow.
Also there is a good article explaining reasons and solutions:
http://social.technet.microsoft.com/wiki/contents/articles/2271.aspx
Best Regards,
Megren|Blog

What causes "SAFARI can not download this file"?

I have purchased and downloaded books from WWW.Baen.com in the past with no trouble. When I now purchase and then try to download a book I get this message--"SAFARI can not download this file".
What has caused this and how do I correct it?
Thanks

Fine. Why did this site all of a sudden become incompaatable and how do I correct it. I have not changed anything on my iPad except to install APPLE's updates.

Flash player will not download update

I am working on OS X 10.8.5 and flashplayer will not download updates because of failure to unzip metafile file. My current version is out of date and no longer works at all. I have seen post from a Yuko C. that may have some answers.

I would request you to post your Query on Flash Player Forums community.
Here is the below mentioned link
http://forums.adobe.com/community/flashplayer
Thanks!
Eshant

Drop down list(JComboBox) - Bottom border is not visible for the first time

Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
I am using jdk1.3.1_02.
Did any one face this issue.
Please let me know.
Thanks,
Sridhar.

I must be a little confused regarding your question.
You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
Lance

Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

No, because iPads do not run Mac OS X. They run iOS.

PROMPT WITH DEFAULT VALUES DOES NOT DISPLAY VALUES THE FIRST TIME

Hi,
With one of our scorecard reports, when you select a division, the leader role/leader prompt picklist values do not get populated the first time. Because this is only happening in reports we have written in house, we do not see this happening to the reports that are installed as default.
Is there any workaround known for this error.
Thanks and Regards

Hey can somebody please let me know how to go about this isssue ..
Thanks

JWS not downloading updated files first time

Similar Messages

Maybe you are looking for