JXTreeTable Column Control disappears after each change

I'm trying to set up a column control component within a JXTreeTable. It works perfectly fine, but when you select a column to hide/show, the list closes, and you have to open it again to select another column to hide/show. Is there a way to set it so the control component stays visible while the user makes multiple selections?

The way to go is implementing a custom ColumnControlPopup - that's the controller which vends the component to show after clicking on the corner button. Instead of vending a JPopupMenu (which is the default), provide something else, f.r. a JXList. Slightly awkward, as for doing so you need to subclass the ColumnControlButton ... ehem ...
My (kleopatra) section in the jdnc-incubator has examples (in package something.table) for custom column controls
HTH
Jeanette

Similar Messages

  • Why is it that the Facetime icon disappeared after i changed my sim from qatar vodafone number to philippines smart number? How can i reactivate my facetime?

    Why is it that the Facetime icon disappeared after i changed my sim from qatar vodafone number to philippines smart number? How can i reactivate my facetime?

    Check to see if you have an old phone number associated with this person in your address book. When you call someone on Facetime it calls ALL numbers/emails associated with that persons contact sheet! This was my problem, this stranger has my husband's old phone number!

  • My comp disappears after each loop

    Im still a beginner at AE but I feel i have a decent grasp on it, but I will probably murder all the termonology in explaining! :-)
    I created a short animation that loops smoothly.  I dropped that animated comp into another longer comp.  I enabled time remapping and the LoopOut property for the loop to loop inside this other comp (as instructed by tutorials). I stretched the bar in the timeline to the full length of this comp and my animation loops while inside this comp just as I wanted.
    The only difference is that when it get to the end of its first run, it blanks out then comes back.  It keeps doing this and its not consistant.  First it blacks out after the first 4 frames (which is the actual length of the original animation), then it does it after 8 frames, then 16 frames before it returns to the beginning and loops over again.
    I have this happen every now and then for reasons I dont understand but as i fiddle with things, I seem to fix it but cant understand why.  This one I just cant seem to get through and not sure what I am missing.  Hope I explained it well!!

    Time in AE is fluid and frames are sampled at the beginning of their duration. You are introducing tiny offsets somewhere that accumulate over time, resulting in those shifting patterns - after each cyle the rounding is just different, hence it seems to "grow". Make sure your tiem-remapping is exact and you do not introduce framrate mismatches.
    Mylenium

  • Extensions disappear after workspace change

    I changed my workspace and now all my extensions have disappeared. Server Behaviors, menus, tag behaviors, all gone. The Extension manager still shows them all as installed.
    Why did they disappear and is there a way to get them back that does not involve reinstalling every one of them? Perhaps a way to force a refresh of what is installed?
    I deleted the cache file and that did not make a difference.
    Any help appreciated.
    Steven

    Well, I didn't just let it, I told it to update. I was pretty well backed up, but the problem was not immediately visible to me.
    I basically did just what your link suggests. I re-enabled all the extensions. Some failed and I re-installed those. Some were missing, and I had to find those.
    The of course is the pain of activating all those extensions.
    I found that my configuration folder must have been read as corrupt. It was renamed Configuration-1 and a new one created. Every time I tried to fix it, it still did not like my old one and renamed it again.
    Once the tech support person realized the depth of the problem he asked me to hold for a minute. 94 minutes later, I was disconnected.
    I used the time to fix the problem myself. It only took about an hour after disconnection to complete.
    After that I received a support incident by email. It asked me to respond to an incident that had no information and just said "How to issue" I responded with, "WTF! respond to what?" followed by the information I shared here and a bit about my lost time.

  • Using opacity renders video after each change !

    Hi all, I am knocking up a video that consists of a ceremony that was recorded with 2 video cameras - one front and one to the side. There are 2 slideshow movies 2 be shown also.
    What I wanted to do was fade video in and out from each camera at specific times so the footage isn't solely from one camera only. I tried using the opacity control but every time I make a change the system renders the entire video. I am loathed to go through that palava for each opacity change - at a guess I think there will be around 20 changes (the entire video will be 1 hour 20 mins when complete.
    I decided to do it in Motion because it's much easier, but, is there a way I could've done it in FCPE without it rendering every single time I make a change ?
    thanks

    Thanks for your response David
    The files were imported into iMovie from mini DV tapes, I was at first going to do it in iMovie then got grand ideas to make it look a more interesting by switching the camera views, but the files are in .dv form. I want to use the audio from the front facing camera only because it is better than the side camera, I turned the audio off from the side camera within FCPE and thought it would be easy to simply adjust the opacity instead of doing fades. Won't the fade out switch the audio to the video footage that fades in ?
    Kevin

  • Music volume control disappeared after updating to 5.0.1.  Tried reseting but won't work, completely silent!

    I upgraded my Iphone 4OS to 5.0.1 this morning and now the volume control has disappeared from the music.  The phone is totally silent apart from when incoming calls are made.  No alert noises either.  Tried restoring to original settings but this hasn't worked.  Any advice? HELP!

    I have the same issue but just since today, i don't understand...

  • Roboform toolbar disappears after persona changes

    When FF starts up and the persona changes (such as with Personas Rotator), the Roboform toolbar disappears. When you retrieve it using Right-Click > Customize, personas can now change and the toolbar won't go away. Any way to make this annoyance go away?

    The default Mozilla theme is basically that persona that looks like one those devices used by painters to color their brushes (I think the persona's name is "caramel"). I don't like it and always use another persona.The only issue is that for some reason when you change it the first time, the Roboform toolbar disappears. When I go to Options -> Toolbar Layout and put it back, then it stays put no matter how many times the persona changes or rotates. It's just irritating having to put it back every time you start FF. Any clues?

  • HDD disappear after ownership change

    Hi!
    Made some changes in ownership/permissions my second hdd to be visible for the second user. Remember that i gave ownership for "admin". First it wont to change new perm. and after gave me some error. I closed Get info and after restart the computer and second hdd bacame invisible. Disk Utility can see it, in OS 9 is visible, not in Tigers desktop. Did a try with File Budy - find invisibles, nothing.
    Help!

    It does not matter if you are logged in as an administrator - if the volume/partition is owned by another user and the permissions are set to "no access by others", then the drive will not mount. You will need to check/change the permissions from the account that owns it, or use a script as the super user to force the volume/partition to mount.

  • Touch pad controls disappeared after update for Bootcamp windows 7

    After updating Bootcamp for Windows 7 on my MacBook Pro 13" (Mid 2009), the touchpad lost its tap functionality and there, nolonger, is a touchpad tab in the Bootcamp Manager. Is there any way to reinstate the "tap to click" function?

    Thanks, but what do you mean by Windows Support Software? ... the Windows 7 drivers, Windows 7 OS, or Bootcamp for Windows 7 ?

  • Bug: Safari - controls disappear after returning from horizontal tilt back to vertical when multiple tabs are op

    Apple Team,
       I would like to report a bug in Safari on iPhone 6 plus/6 on iOS 8.1.2. Here is what happens,
    Launch multiple tabs/instances of Safari (at least 2) and stay in vertical mode.
    Now, switch to display multiple windows using the overlapping square icon.
    Flip the phone in horizontal position and then return to upright/vertical position.
    The icons at the bottom will show momentarily and will then disappear, leaving no option to launch a new new or return from multi-window mode unless you select one of the safari instance.
    Tthanks and hope this gets addressed.

    This is a user support board and your post will not be seen by Apple. Use the official Feedback process to report bugs.
    http://www.apple.com/feedback/

  • Images disappear after each restart...?

    ...but the sound remains (though, sometimes not!) I wonder why my images in the timeline are visually still there but, when I launch the project to be played, every once in a while an erro's board means that media are offline... Why is that, please and I will I correct that situation?
    UdeUin (Claude)

    Thanks for the screen-caps. From the G-Spot screen, it appears that you have Imported VOB's, or at least from VOB's.
    What VOB's letters stand for?
    Maybe! ; my daughter did it 5 months ago (the import) and she's not sure the way she used - It was directly from the camera to the computer by the usb cable I think, and, only the images downloaded at that time were sill available...  Actually, these files are stocked in a folder as .mov. Is this ok?
    These are MPEG-2 files, and can cause some issues. However, it also appears that you have Imported them, so I'm going to take a guess here: when you did the Import, did you do so FROM the DVD's, or did you copy over the various VOB files to your computer, and then Import from there?
    Not from a dvd, directly from the camera...
    I would suspect the first. If that is the case, there is probably a bit of confusion on what Import does. It does NOT copy the source files at all. It only links to the location where the source files WERE, when you Imported them. If you did the Import FROM the DVD's, they will need to be in the drive(s), for PrPro to work with them. If you did this from several, there will be more work to do, to get things working properly. If this is your case, we'll talk more about what you'll want to do.
    The files are all the same type and in the same folder...
    If you did copy the VOB files FROM the DVD's onto your system, there could be other problems with why PrPro is seeing them as Offline. If this is the case, we'll talk more about how to try and fixt that too.
    I will say that working with VOB's and the MPEG-2 files that they can contain is probably not the best workflow. However, you seem to be well into your Project, based on the Timeline screen-cap. If they have been working so far, we won't get into other ways of doing it. Just know that there are better workflows for the next Project.
    Good luck, and let me know the process that you used to get your VOB files onto your computer and into PrPro. Each method will require some different techniques.
    Hunt
    PS MPEG-2's Imported from VOB's CAN often cause Audio problems. Let's get the Media Offline issue solved first, and then we'll work on the Audio issues.
    It's correct!
    Claude
    I do hope giving you some answer providing you the cue in order to find the good way to resolve the whole thing... Thank you very much!

  • Screen Brightness control disappeared after upgrading to Mountain Lion

    Hello all.
    I've just upgraded to Lion, and now I can't adjust the brightness of my screen anymore!
    Anyone else has this problem?

    I was having the same problem after I completely tore down my Macbook Pro mid-2010 in order to replace the keyboard.  (Phew!)  After re-asssembling, everything was working again except for the screen brightness buttons (F1,F2).  I figured it was a bad keyboard, but after zapping the p-ram, the brightness buttons now work as they should.  Thanks for the tip!

  • Files are disappearing after making changes in Camera Raw

    I have lost multiple files, and I have no idea what the rhyme or reason is. There are random photos that are missing out of my folders. If anyone has any knowledge about this, I would greatly appreciate it. Thank you all for your time!

    Meghan,
    What OS, version of Photoshop, ACR, etc?
    Make sure you are running the latest version of Bridge, especially.

  • My ringtone disappeared after I changed my apple ID and password.  How do I retrieve it?

    Where does one go to "reinstall" a ringtone?

    you have to go to the itunes store with your old apple id and password and look in purchased apps

  • Mapping-source column(for the measure)disappears after pressing apply

    I am using AWM 11.2.0.2.0B and Oracle 11.2.
    I have successfully mapped my dimensions. Then I defined a stored measure, say DISTANCE and I want to map it to a column in my database. When I click the "apply" button, the mapping disappears! And I can not find any error messages. I have tried mapping another column to it (defining a different measure), still the mapping disappears after applying.
    The type of the data(measure) is number(22) in my database, so I choose Data type: Number, Precision:22 and Scale=0 in my cube(storage section) and I check "use compression", therefore the measure will inherit the mentioned data type (of cube). I also tried using integer as the data type, no success. I first doubted that it expects some different type of data to be mapped, but seems that is not the problem. Every column I put there as my source column disappears after clicking on apply!
    Any idea what the problem is or where I should find a log?
    Edited by: 903009 on Dec 17, 2011 10:03 PM
    Edited by: 903009 on Dec 17, 2011 10:05 PM

    Hi Veeresh,
    As per my understanding, this error happens when the OLE DB Source component cannot find the corresponding source column in the database table. Possible reason is the the column name in the external database table has changed or
    the column has been removed.
    To verify this issue, please go to the Advanced Editor for OLE DB Source Input and Output Properties tab to see the External columns and Output columns. To fix it, please refresh the data or recreate the Source.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for