K7N2 ilsr supports cpu halt?

Anyone knows of a program for lowerinng cpu idle temps on nforce2 that really works?I'm running my cpu, a thoroughbred 2000xp in normal speed, 133x12.5 = 1667ghz 1.65v Vcore,on a K7N2 ILSR and the temps are
52C idle
56 full load.
With my previous motherboard a gigabyte kt333 there was no problem with cpucool or cpuidle.Now none of them seems to work and I've tried even wcpredit and speedfan4.13 but even if the settings seem ok there is no drop in temps.I also have disabled all the extra features like on board audio,lan etc and my cpu is really idle. I have the all copper GlobalW™ý CAK 4-88T and arctic silver5 and enough ventilation.Temps reported are the correct ones(bios v7.71).I think I'll try some watercooling or peltier kit.
I am not terribly conserned about the temps and I know it won't hurt my pc but I am pissed off that the halt commands don't work with nforce 2. Anyone knows in what temps are the 2800xps or 3000xp running?And should barton or thoroughbred run cooler?You know greek summer is great... but not for computing(room temp 29c and system 43c when idle with open case)

Quote
52C idle
56 full load.
if it goes over 60 celsius then you have to do something about it.
dont run coolerxp that comes with pc alert 4 as it only gets cpu temp to increase.

Similar Messages

K7N2 ILSR and Coolermaster Aero 7 Problems?

do the K7N2 ILSR support the Coolermaster Aero 7 LITE ? Cause I have one of those, and I wont change to another MSI if I cant use that, its brand new :( Also, would there be any problems with my new GFX5900 SPVTD, also this is MSI.
cause when look at this I se that there are alot of those conductors(?) behnd the AGP slot, wont my card break them in the insertion phase?
http://www.hardwarezone.com/img/data/articles/2003/773/mobo-1.jpg

Ok, I dont thinkl there would be any problem with the gfx then, and it would be strange if msi did a motherboard that dosent fit one of thier own cards...
this is the sink I was talking about, the coolermaster...
http://www.coolermaster.com/index.php?LT=english&Language_s=2&url_place=product&p_serial=CP5-8J71F&other_title=+CP5-8J71F+Aero%207%20Lite

[nForce] K7N2-ILSR Problem with FSB

i am having trouble with the above
if i set the FSb at anything over 167 in the bios the system will boot as far as windows then hang at the welcome screen,
if the FSb is set at anything below 167 everything seems fine
specs of the pc are
AMD 3200+ athlon xp
MSI K7n2-ILSR
Tt Volcano7
2x512 MB PC3200 Geil Duel channel
Nvidia GeForce2 mx400
1x160GB maxtor sata Primary Master
Sony DVD RW DW-U10A Secondary Master
TDK CDRW480 Secondary Slave
Realtek AC97 Onboard Audio
650w poewe supply with triple fans
Windows XP SP2
ps memory runs fine at 2*200 no problem

Does problem exist when running fsb:dram at 1:1?
same problem whichever ratio is set
List max amps for psu for 3 different rails; supply make/model also; 650W sounds impressive but it might be a Q-tec
it is a q-tec supply ? i gather there is a known problem with these ?
maxtor sata on IDE master? typo?
OOps Typo maxtor sata on sata port
Is this new system? Or added new component
system previously had an amd 1800 chip and 333memory and ran stable
Is cpu/heatsink correctly greased/fitted?
cpu is seated corectly and thermaltake silver heat paste used
What are temps in bios for cpu/system?
CPU running at 44 degrees chassis running at 34 degrees

K7N2-ILSR Sudden freezing due to onboard sound

I have had a few problems from the start with the K7N2-ILSR, i have overcome them all except my machine freezes when the onboard sound is enabled. I do not have any other cards in my machine except for my Geforce4.
The problem will only occur when the onboard sound has been eneabled in the bios it will happen when you play sound or not it just locks up or restarts!!!
I have read through alot of the posts and i havn't come across any problems that are the same.
Could you please give me some help as i am getting really annoyed with it.
Cheerz.
3000+ Barton 333
K7n2-ILSR Delta
2X 256mb DDR400 Kingston
80gb IBM ATA100
120gb Diamond maxtor 9+ 8mb
Asus Geforce4 Ti 4400
Pioneer a05
lite-on 16X DVD
Memorex 24X 1040MAXX

No If i enable onboard sound or install a PCI card i will get a lockup whenever! I don't have to be doing anything it will just suddenly freeze.
I am using my machine now with the onboard sound off and it will not freeze at all but after this session on the internet i get an error and then my machine will not BURN
COPY & PASTE
SAVE Documents
or Shut my Internet down
I installed win2k on the HDD on IDE1 (Master) after setup finished i added the second HDD on IDE3(Raid) set it to a "0" array.
I am going to try a fresh install onto my HDD on IDE3 (Raid) with WINXP chosing the Raid option in setup then install all the latest drivers from nvidia and so on.... The only problem i have is time or lack of!
i have ran the memtest86 V3.0 and i din't get any errors but i ran the test while i had dual ram setup. I will try again seperately.
I have also changed my DDR settings to 333 to match the CPU this has had no effect.
What powersupply would you say is the best? Where to get it from? and how much?

K7N2 ILSR & Sempron 3000+

Hi,
I just installed a new Sempron 3000+ on my mb K7N2 ILSR and I don't know how to configure it properly in the Bios (FSB, etc.)
I installed the latest bios availble thru Live update but the cpu seems to be not recognized as 3000+
Awaiting some help!
Many Thanks in advance!!
David

this is probably just a cosmetic issue.
main question is... is the sempron performing at the correct speed?
if so, it's just a case of the mobo not knowing what to call it. you may try downloading a program like cpu-z or similar to see if it shows the correct ghz and bus speeds while in windows

K7N2-ILSR Lan Won't connect!

:bonk:I am at the end of my rope!I bought a K7N2-ILSR in January and was so frustrated when I could not get the LAN to connect no matter what I did.I finally submitted my problom to MSI and received a RMA and my board was replaced.I have the same problom.I can put in a separate PCI card and will work fine but the onboard will not connect.I have been through troubleshooters and driver reload and hardware removal and reinstallation.I have ping tested without failure in the windows troubleshooter.The light blinks and it says it is sending packets but receiving none.Any ideas?

Did you load the system disk that came with your mainboard?
nVidia also has the unified drivers.
For Windows XP here:
http://www.nvidia.com/object/nforce_udp_winxp_4.24
Or are you running Linux? Heck Mandrake 10 final release finally is now supporting LAN

How to tell if video card works at 8x speed on MS-6570 K7N2-ILSR?

my mobo is MS-6570 K7N2-ILSR with the latest bios update and my video card is ATI READON 9600 236mb 8x agp and windows xp pro sp2.
when installing ATI Catalist v5.9 (the latest), it configures the card at agp speed: OFF.
in the bios, all i have for agp speed is: AGP 8x - enable/disable.
my friend have gigabyte mobo with the same video card and ati catalist configured his video in windows xp pro sp2 at 8x speed.
why ?
is there any configuration i should check in the bios and/or in windows ?

Quote from: Wonkanoby on 07-October-05, 18:22:19
you have to install the gart driver in the nforce drivers packagenVidia Drivers
and best its done before the ati drivers
gart driver ?

Mac Mini won't boot up (CPU Halted)

Hi all, I have a Mac Mini with Leopard that has started refusing to boot up. I generally leave it switched on all the time but a couple of days ago the fan (I think) was getting pretty noisy so I shut it down. When I attempted to reboot the next morning it gave me the familiar chime, a silver screen, it then went through its normal scrolling white text on a black background before giving me a "CPU Halted" message and closing itself down. Anyone have any ideas? Does that sound like a fan or an internal battery issue? I wouldn't be too worried as I have a new iMac but there is one piece of software (cocoa booklet) on the Mac Mini I need to allow me complete a monthly parish magazine for the local church and it doesn't work on Snow Leopard. I don't mind cracking the Mini open if more info is required and would really appreciate any help you guys could provide...
Mac Mini 1.66GHz Intel Core Duo processor 2Gb Ram, MATSHITA DVD-R UJ-846 (FM3J Mac OS X (10.5.6)

Mac Minis are generally almost silent if they have free access to room temperature air and if their air intake ducts are not clogged with dust or animal fur.
The fact that your fan was running noisy suggests that the Mini was working very hard to stay cool. And the fact that you ran the Mini 24/7 gave it ample opportunity to suck in dust or fur.
If the Mini looks dusty, I would gently vacuum the vents on the bottom edge of the Mini. Don't use "canned air", as that will only push the dust further into the Mini.
The Mini's CPU will shut down if the Mini can't keep cool enough.
On the other hand, it is possible that the fan itself is failing, and that was the cause of the noise and the inadequate cooling.

CPU halt command

Hi All,
just read that using the CPU halt command can slow down your HDD performance, is this true ?(
thanks :D

It certainly does on my KT-4 w/bios 1.3. About a 30% performance hit. Also does on friends KT-4V with bios 1.8. XP Cooler and CPU Idle software programs specificly. I don't think many people will notice the performance hit other than benchmarking.

Cpu halt doesn't function (kt6 lsr)

The cpu halt doesn't function after I've activated the option in the bios (sometimes work, see next-->).
The temperature for the cpu is the same (around 58 ?C) using the same programs and I'm not doing a lot. But later that I resume my computer from an s3 suspend it works, the temperature then stabilize around 47 ?C after a few minutes. I don't understand why. I think that a driver or another thing in the OS is interfering and the s3 kill that. I'm using win xp sp1 + kt6 lsr 5.1 + (2500+ @ 200 x 10.5) + msi fx5200.
(Excuse my english, my native language is spanish)
thanks

Bas, I can't get into this because I admit I'd be way out of my depth
So I can only humbly offer my layman's logic:
- MSI BIOS has bugs (e.g., non-functioning CPU Halt, cold-boot prob) so why should Corecenter be exempt from this potential?
- some forum contributors have posted problems with Corecenter
- KT6 temp sensors are the same Winbond sensor chip that's been around for some time on KT3, KT4 & of course other board manufacturers, so MBM have long got used to it (like saying only a Ford main dealer can understand Delphi automotive parts fitted in a Ford car?)
- KT6 temps for a particular CPU being generally reported so much higher than KT4 boards does seem a bit illogical
- I've read a lot of posts elsewhere from other MBM users who don't trust MSI temp readings and who are more knowlegable than I am on sensors
I do agree with you that MSI should be best placed to know the true temps and I do agree I'm in no position to know whether MBM is more accurate.
Oh, and I'm an MSI fan, not an MSI knocker. Still don't trust Corecenter temps, though.

MSI K7N2 ILSR and TwinMos Twister?

Hi,
Does anyone have an idea if the TwinMos Twister PC3200 dual-channel kit is compatible with K7N2 ILSR?
Thanks.

Just to clarify, I too have seen TwinMos being used, but have yet to see the TwiSTER series being used.
src="http://www.twinmos.com/images/symbol/right03.gif" width=11
vspace=3>
color=#7d7d7d>TwiSTER
Series
src="http://www.twinmos.com/dram/images/module_twister.jpg"
width=160 align=left> color=#000000> The company named the new product line –
TwiSTER after the core concepts incorporated into the
technology with "S" standing for "speed" and "TER" standing
for"terrific"to approach over-clocking power users?gaming
enthusiasts and business customers with its high performance
and speedy yet steady retrieval of data.
src="http://www.twinmos.com/images/blank.gif" width=20>
bgColor=#cccccc border=0>
class=small-11> src="http://www.twinmos.com/images/symbol/rightdown02.gif"
width=9>TwiSTER
Series
border=0>
hspace=3
src="http://www.twinmos.com/images/symbol/point.gif"
width=5>
class=small-11>DDR
Series
href="http://www.twinmos.com/dram/dram_p_twister_ddr500.htm"
target=_parent>PC4000/DDR500 CL2.5 class=mail
href="http://www.twinmos.com/dram/dram_p_twister_ddr433.htm"
target=_parent>
href="http://www.twinmos.com/dram/dram_p_twister_ddr400.htm"
target=_parent>PC3200/DDR400
CL2/CL2.5
hspace=3
src="http://www.twinmos.com/images/symbol/point.gif"
width=5>
color=#000000>Dual-Channel
Kits
href="http://www.twinmos.com/dram/dram_p_twister_dualchannel_ddr400.htm"
target=_parent>PC3200/DDR400
CL2/CL2.5
onmouseover="MM_swapImage('Image3514','','images/symbol/top2.gif',1)"
onmouseout=MM_swapImgRestore()
href="http://www.twinmos.com/dram_info.htm#top"> hspace=5 src="http://www.twinmos.com/images/symbol/top1.gif" width=24
align=right vspace=5 border=0
name=Image3514>
Kinda silly marketing scheme if you ask me. A compatability report is available, however, only the K7N420 is listed...I never went any further than that.
Like I said, it's unknown territory.

What is the max supported CPU for MSI 865PE-NEO2-LS?

Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS? I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2? Is that right, or can it support higher speeds such as the 3.4+
Thank you!

Hello,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1

K7N2-ILSR: adding S-ATA drive to existing system

Hello everyone,
I have a system based on the K7N2-ILSR, Athlon 2500+, 2x160GB IDE Harddrives.
Now I wanted to connect a S-ATA drive (with data on it) from a friend, but I can't get it to show under Windows XP Pro. I've installed the drivers for the Promise chipset and this is shown in the device manager. I understand that you have to create a "1 disk array" before the drive can be used but I can't afford to loose the data on it. Is there any possibility to connect the drive without having to format it?
Thanks in advance,
Bomfunk

Quote from: Bomfunk on 11-February-07, 18:52:53
What type of array do I have to create in order for it to work?
Any parameters I have to be aware of?
Thanks for your help,
Bomfunk
standart stripe RAID1+0, use defaults parameters.
about aware as i notice before remember to answer with "NO" when asked about this:
Do you want to clear boot sector that will.delete any existing data on your hard disks?.Y - Clear boot sector Y/N

K7n2 ilsr boot sequence problem

Hi All,
I have problem with my new k7n2 ilsr mobo. I have a Seagate 120 GB SATA HDD on the SATA RAID controller, and other HDD-s on the IDE1 and IDE2.
If the SATA drive is alone in the system, it boots up normally, but if I connect the PATA drives, the computer want to boot from the first PATA drive.
How can I set up the boot sequence between the SATA and PATA?
I cant find any option in the BIOS.
I hope, somebody can resolve my problem.
Istvan
K7N2 ILSR v. 1.3
AMD Barton XP 2500+
2x 512 MB Samsung DDR RAM
Seagate Barracuda 120 GB SATA HDD
WD Caviar 40 GB PATA HDD
WD Caviar 850 MB PATA HDD
LG CD-RW
LG DVD-ROM
Matrox G400 VGA
400 W noname PSU

Hi Raven,
Thanks for Your help.
Istvan

K7N2-ILSR Stop message on W2KP start

K7N2-ILSR
AthlonXP2500+
Kingston HyperX 512MB PC3200 CL2 (using one channel of RAM)
IBM 60GB (master) and 120GB (slave) in IDE1 with MSI-supplied round cable
Sony CDROM in IDE2, nothing in IDE3
ATI Radeon 9500 128MB
During boot, I get a screen about the FastTrak controller (Promise), which says that no drive is attached to the FastTrak controller, and the BIOS is not installed (Is this just a matter of not using the RAID connection?). BIOS POST's normally, all drives are recognized properly.
Startup continues to the splash screen, then I get a STOP message that the boot drive is inaccesible. (I can't get to the machine right now to reproduce the codes)
What's going on?

Quote
During boot, I get a screen about the FastTrak controller (Promise), which says that no drive is attached to the FastTrak controller, and the BIOS is not installed (Is this just a matter of not using the RAID connection?). BIOS POST's normally, all drives are recognized properly.
Normal, if you aren't using it POST will report that.You are correct.
Quote
Startup continues to the splash screen, then I get a STOP message that the boot drive is inaccesible. (I can't get to the machine right now to reproduce the codes)
I had an issue like that when I had my faster RAM set to SPD.Relax the timings a little and see what happens.

K7N2 ilsr supports cpu halt?

Similar Messages

Maybe you are looking for