K7t 266a pro2 need led help.

Hi,
my kids comp has a k7t 266a pro2 mb,1700 xp chip,400psu,512 corsair cas2 ddr2100 ram.It has been working flawless for right at a year now.No problems at all.
Today they cut it on and i get short beeps and the led stops at the 2 one (memory check).
 X(  )
 X(  X(
Reseated the ram ,no effect.
Could it be the ram?Other things to check?

Hi ToyTac,
I am not sure if this means that mobo or RAM is going bad - if that is the case, you will find out soon enough  )
It can also mean that your kid can use the computer another year (and that you still have slot 3 to repeat the trick if necessary  :D  :D  :D  )
Hans

Similar Messages

  • PT880 Neo 4 red led, Need your help please!!

    Hello all
    It is my first post and I need your help. Today I purchased a combo P4 3/800 E Box CPU, MSI PT880 Neo FSR Mboard  and DDR 512MB 3200 VS Corsair 400Mhz 184 Pin Dimm from Fry's Electronic. I can not get my system to boot , no beep but only 4 red led and nothing on the screen. I used on my system Enermax 300W with DVD burner, DVD player, 60G HD, SBlive 5.1, ALL in Wonder Radeon 32Mb..After I am following all recommendation in the defferents Topic, I have no luck it won't boot. The 4 red leds are still on. Help me please thank you
    Brono85

    I've just got my Noisetaker 470watts too, it has the same rails as CoolerGiant , but I like CoolerGiant's active cooling system for both CPU and PSU , just that it's too lengthy and my chassis was small in size .
    Back to the topic, likewise anr11 mentioned, you may need a BIOS flash and you can use Memtest86 to test your RAMs out .

  • Early k7t-266 pro2-ru XP snafu

    guess there's no avoiding saying that I'm new here in this forum, so there.
         Anyway, I have a k7t-266 pro2-RU, one of the first boards that came out here in the Philippines, so it is definitely one of the early revs of this product.  I've had it for about a year, and had no problems with it.  It has the most recent bios version dated March, 2002.
         My problem now is that it seems to break any Athlon XP CPU that I plug into it.  I've tried clearing bios, made sure that there's no special adjustment I need to do, whether jumper or bios based, made sure that the heatsink is seated properly every time,and generally tried every damn thing I could think of.  I've had no luck, so I'm running an Athlon 900 while I try to figure this out. (yes, the board works with non-XP cpu's)
         I'd greatly appreciate any help from this forum.  I've been thinking along the lines of a voltage problem or just the fact that the board is an early sample... please help, I'm becoming desperate...

             I removed all the drives and other peripherals until all that was connected were the board, mem, cpu, fan, vidcard, modem, keyboard and a case fan.  My power supply is an enermax 350 dual fan, so there shouldn't be any prob there...
            Changing the FSB in Bios was one of the first things I tried to do, wonkaboy, but the CPUs break before I can even hit "Del" and enter bios, and besides, I'm pretty sure k7t266 pro2 ru has auto settings for FSB...
             I appreciate the help, I'll keep trying on this side, hope I don't fry any more cpu's.fortunately, I work at a computer shop so it's pretty easy for me to have a non-physical damaged CPU replaced.
    Any other suggestions will elicit another long winded reply from me. mbe I shud change my handle to longwind...

  • I need your help -- ORA-00600

    Hello
    I need your help ^^*
    Windows 2000 Server
    Resin 2.0.1
    jdk 1.3.1
    connect to Oracle 9.2.x using jdbc driver : classes12.jar <-- it is from oracle9i
    When I excute a query(rs = pstmt.executeQuery()) I got a error message from
    oracle9i
    --> java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-
    1], [0], [], [], [], [], [], []
    This problem is not happed at Oracle8i(8.1.6) <-- I think a code is not problem.
    When I tested the code(same code) at another server ( Windows 2000 Server,Resin
    2.0.5 ,jdk 1.4.0,j2ee 1.3,connect to Oracle 9.2.x,jdbc driver : classes12.jar ),
    the error message is not happened.
    I'd like to know that it is jdk or resin version's problem or not And how can I
    solve the problem.
    Have a nice day ^^*

    Oracle documentation read:
    ORA-00600 internal error code, arguments: [string], [string], [string], [string], [string], [string], [string], [string]
    Cause: This is the generic internal error number for Oracle program exceptions. It indicates that a process has encountered a low-level, unexpected condition. Causes of this message include:
    timeouts
    file corruption
    failed data checks in memory
    hardware, memory, or I/O errors
    incorrectly restored files
    The first argument is the internal message number. Other arguments are various numbers, names, and character strings. The numbers may change meanings between different versions of Oracle.
    Action: Report this error to Oracle Customer Support after gathering the following information:
    events that led up to the error
    the operations that were attempted that led to the error
    the conditions of the operating system and databases at the time of the error
    any unusual circumstances that occurred before receiving the ORA-00600 message
    contents of any trace files generated by the error
    the relevant portions of the Alter files
    Note: The cause of this message may manifest itself as different errors at different times. Be aware of the history of errors that occurred before this internal error. Paul

  • Hi, I need your help.. I'm telecommunication technician, in my job we have CISCO 10008 routers, there's connected to DC Power b

    Hi, I need your help..
    I'm telecommunication technician, in my job we have CISCO 10008 routers, there's connected to DC Power by DC PEM sources. There's powered by  -52Vdc, but there's a problem, sometimes occurs failures, ESR-HH-GE cards suddenly crashes, the FAIL led is on and that's yellow color, but it doesn't works. We replace cards for this cases, and the service is OK, but this occurs again in the same slot or different slots, each 2 or 3 months aprox., or maybe one. Thanks for your help.

    Duplicate posts.   
    Go here:  http://supportforums.cisco.com/discussion/12185941/hi-i-need-your-help-im-telecommunication-technician-my-job-we-have-cisco-10008

  • Driver K7t 266 pro2

    Hi,
    I have a slight problem. I had to fomat my harddisk, and so ofcourse lost all the drivers on it. That wasn't the problem. However I seem to have lost both the box and the CD of my K7t 266 pro2 Via k7226a amdxp. Because of the drivers on the internet, everything works fine, exept the onboard sound ;( . I think I may have used the wrong driver for this. Can anyone tell me where I could find the right driver? Because I'm not to experienced (in computers) and I get a bit mixed up in the drivers mentioned. So any help would be appreciated. Thanx )

    http://www.msi.com.tw/program/search/ser/SerConRes.php?DATA=1&SearchKey=k7t
    there are a few models follow links
    find correct one,look for southbridge chip number
    and exact name between pci slots

  • Need some help, system won't boot now.

    Yesterday, I was having trouble getting WinXP installed on my SATA drive...after I tried some stuff to no avail, I decided to call it a night.  When I got up, I went to boot up the system and now all that happens is the 1 LED light flashes and the CD-ROM LED light flashes(and even these don't happen all the time).  Nothing else happens, fans don't start etc.  So I need some help on troubleshooting this prob.  When I do start it up, the D-bracket LEDs flash 4 red also, just flash like the other LED lights.  My first guess would be that the PSU is dead?  My PSU is a Antec Truepower 380W.  Any help is much appreciated.

    Believe Bas; As he is 100% Correct, as even 18 Amps is not anywhere enough on the +12V Rail nowadays, I mean I think the New "Minimum" Should be No Less than 25 Amps on the +12V Rail, With these new Powerful Vidio Cards, that Require thier own "Molex" Power Supply Connected to them (As most of these Top Nvidia FX, and ATI Pro's) Need and they can demand up to 6 Amps themselves, I mean, these Cards Have 400 and 550MHZ GPU's on them with over 100 Million Transistors, Not to mention the Extra 256MB of High Speed Graphics memory, Add this with a New 64BIT CPU, and a Sound Card, and a Couple of S-ATA's in RAID, And the 1GIG of High Speed System RAM, and you Are At or Over 18 Amps Already , And we are not even talking CD and DVD's or the At least 4 Fans that you should have ...Yep I for one say the Day's of the 18 Amp Min. Rating for the +12V Rail are Gone Forever...Why do you think that all the Really Good PSu's have At Least 30 Amp Ratings on thier +12V Rails......And in the Case of Enermax, They even went as Far to Start Building thier PSU's With 2 (Dual) +12V Rails ...Thats right, Now they have a +12V-1, and a +12V-2 , Now the CPU gets it's OWN Dedicated +12V Rail, and the System Gets the +12V-2 Rail.......I just got the new Enermax for my 3RD Rig that I'm Building (Dual Opteron 248) Rig , with Bas's Help of Coarse.....But For $99.00 US  It was the Best Money spent yet, so much, for a little Price, as the Antec Units are More expensive...And I hear that they are doing a little Cheating on thier Amp Ratings these Days ..Ask "Wonk" he will tell you...  ..............Sean REILLY875

  • Basic Output program need some help...Please

    import java.io.*;
    class FileOutputDemo
    public static void main(String args[])
    int one=1, two=2, three=3;
         FileOutputStream out; // declare a file output object
         PrintStream p; // declare a print stream object
         try
              // Create a new file output stream
              // connected to "myfile.html"
              out = new FileOutputStream("myfile.html");
              // Connect print stream to the output stream
              p = new PrintStream( out );
              p.printf ("This is written to a file %d", one);
              p.close();
         catch (Exception e)
              System.err.println ("Error writing to file");
    }Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
    I have a list of integer values like 1, 2, 3, 4? 10
    And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
    This is written to a file 1
    This is written to a file 2
    This is written to a file3 ?etc
    Also this substitution has to be outputted to a new file every time.
    Thank you very much in advance for your kind help
    if i have to post this anywhere else please advise me..
    Adam

    import java.io.*;
    public class FileOutputDemo
        public static void main(String[] args) {
             FileOutputStream out; // declare a file output object
             PrintStream p; // declare a print stream object
             try
                  // Create a new file output stream
                  // connected to "myfile.html"
                  out = new FileOutputStream("myfile.html");
                  p = new PrintStream( out );
                  int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
                for (int element : arrayOfInts)
                     p.printf (element + " ");
                  p.close();
                  // Connect print stream to the output stream
             catch (Exception e)
                  System.err.println ("Error writing to file");
    }ok .... guys i really understand what do you mean,
    i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
    Thanks

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Need your help in Remodeling concept

    Hi Gurus need your help in time estimations
    I have a cube with data and now I need to add 10 new info objects to the cube which are including Date fields (BUDAT, BLDAT) these 10 fields will be populated to the cube from a Z table in ECC as we donu2019t have these fields in the cube we have to go for remodeling of the cube
    My client requires how much time it will take to complete this
    Now I want to know how much time it would take to do this (if any customer exits and user exits are required) and addition if new fields will have any effect on the current queries
    Please advice in this
    Thank you

    The time taken will depends on a lots of factor like server speed, available memory, background jobs etc. Apart from this, the time will also depends on how much the cube is filled i.e. the no. of records in the cube. Its very abstract to tell you the exact time taken for this. But, please make sure that you have the backup of the cube which you are going to re-model. T0 say, I think 3-4 hours should be ok for the remodelling.
    Thanks.
    Shambhu

  • Need your help on performance issue please

    Hello everyone!
    I need your help to understand an effect I notice with a Thread class I built. I currently work on enhancement of my application Playlist Editor (see http://www.lightdev.com/page74.htm) and a new release will be available soon.
    Among other extensions the new release will have a title filter function which is based on audio data that is recursively read from ID3 tags of files found in a given root directory. The data collection is done by a CollectionThread class which reads into a data model class AudioDataModel and the entire process works fine, no problem with that.
    However, when my application is started for the first time the CollectionThread runs approximately 3 minutes to collect data from approximately 4300 audio files on an Intel Pentium M 1,4 GHz, 512 MB RAM, Windows XP SP2. When the application is shut down and started again, it takes only a few seconds to do the same task for all subsequent launches.
    I already tried to start the application with java option -Xms40m to increase initial heap size. This increases performance in general but the effect is still the same, i.e. first run lasts significantly longer than subsequent runs.
    I also tried to build a pool mechanism which creates many empty objects in the data model and then releases them to contain the actual data at is being read in but this did not lead to better performance.
    It must have to do with how Java (or Windows?) allocates and caches memory. I wonder whether there is a way to pre-allocate memory or if there are any other ideas to improve performance so that the process always only takes seconds instead of minutes?
    I attach the key classes to this message. Any help or ideas is much appreciated!
    Thanks a lot a best regards
    Ulrich
    PS: You can use the news subscription service at
    http://www.lightdev.com/dynTemplate.php4?id=80&dynPage=subscribe.php4 to be informed when the new release of Playlist Editor is available.
    All classes posted here do not need debugging, they already have proven to run error free. The classes are only posted for information for the interested reader - no need to go through all the stuff in detail - only if it interests you.
    My application calls class CollectionThread wich is a subclass of InfoThread. CollectionThread recursively goes through a directory and file structure and stores found ID3 tag information in instances of class ID3v11Tag which in turn gets stored in one instance of class AudioDataModel. All classes are shown below.
    This is the mentioned CollectionThread
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import com.lightdev.lib.util.InfoThread;
    import java.io.File;
    * A class to collect audio data from a given storage location.
    * <p>
    * <code>CollectionThread</code> uses ID3 tag information to gain data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 13, 2004
    public class CollectionThread extends InfoThread {
       * constructor
       * @param model  AudioDataModel  the data model to collect data to
      public CollectionThread(AudioDataModel model) {
        this.model = model;
       * constructor, creates a new empty AudioDataModel
      public CollectionThread() {
        this(new AudioDataModel());
       * set the data model to collect data to
       * @param model AudioDataModel  the model to collect data to
      public void setModel(AudioDataModel model) {
        this.model = model;
       * get the data model associated to this thread
       * @return AudioDataModel  the data model
      public AudioDataModel getModel() {
        return model;
       * set the directory to collect data from
       * @param rootDir File  the directory to collect data from
      public void setRootDirectory(File rootDir) {
        this.rootDir = rootDir;
       * do te actual work of this thread, i.e. iterate through a given directory
       * structure and collect audio data
       * @return boolean  true, if work is left
      protected boolean work() {
        boolean workIsLeft = true;
        maxValue = -1;
        filesProcessed = 0;
        if(getStatus() < STATUS_HALT_PENDING) {
          countElements(rootDir.listFiles());
        if(getStatus() < STATUS_HALT_PENDING) {
          workIsLeft = collect(rootDir.listFiles());
        return workIsLeft;
       * count the elements in a given file array including its subdirectories
       * @param files File[]
      private void countElements(File[] files) {
        int i = 0;
        while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
          File file = files;
    if (file.isDirectory()) {
    countElements(file.listFiles());
    i++;
    maxValue++;
    * recursively read data into model
    * @param files File[] the file array representing the content of a given directory
    private boolean collect(File[] files) {
    int i = 0;
    while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
    File file = files[i];
    if(file.isDirectory()) {
    collect(file.listFiles());
    else if(file.getName().toLowerCase().endsWith("mp3")) {
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    i++;
    filesProcessed++;
    fireThreadProgress(filesProcessed);
    return (i<files.length);
    /** the directory to collect data from */
    private File rootDir;
    /** the data model to collect data to */
    private AudioDataModel model;
    /** the number of files this thread processed so far while it is running */
    private long filesProcessed = 0;
    This is class InfoThread
    * Light Development Java Library
    * Copyright (C) 2003, 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.util;
    import java.util.Vector;
    import java.util.Enumeration;
    * Abstract class <code>InfoThread</class> implements a status and listener concept.
    * An <code>InfoThread</code> object actively informs all objects registered as listeners about
    * status changes, progress and possible exceptions. This way the status of a running
    * thread does not require a polling mechanism to be monitored.
    * <p>
    * <code>InfoThread</code> implements the following working scheme
    * </p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public abstract class InfoThread extends Thread {
       * construct an <code>InfoThread</code> object
       * <p>This class is meant to be used when a <code>Thread</code> object is needed that actively
       * informs other objects about its status</code>. It is a good idea therefore to register
       * one or more listeners with instances of this class before doing anything
       * else.</p>
       * @see addInfoThreadListener
      public InfoThread() {
       * set the amount of time this thread shall idle after it is through with one
       * work cycle and before a next work cycle is started. This influences the time
       * other threads have for their work.
       * @param millis long  the number of milliseconds to idle after one work cycle
      public void setIdleMillis(long millis) {
        idleMillis = millis;
       * Causes this thread to begin execution; the Java Virtual Machine calls the <code>run</code>
       * method of this thread. Calls method <code>prepareThread</code> before calling
       * <code>run</code>.
       * @see run
       * @see prepareThread
      public synchronized void start() {
        setStatus(STATUS_INITIALIZING);
        prepareThread();
        setStatus(STATUS_READY);
        super.start();
       * call method <code>start</code> instead of this method.
       * calling this method directly will lead to an exception
       * @see start
      public void run() {
        //System.out.println("InfoThread.run");
        if (status == STATUS_READY) {
          boolean workIsLeft = true;
          setStatus(STATUS_RUNNING);
          while (status < STATUS_STOP_PENDING && workIsLeft) {
            if (status < STATUS_HALT_PENDING) {
              workIsLeft = work();
              if(!workIsLeft) {
                setStatus(STATUS_WORK_COMPLETE);
            if (status == STATUS_HALT_PENDING) {
              setStatus(STATUS_HALTED);
            else if (status == STATUS_STOP_PENDING) {
              setStatus(STATUS_STOPPED);
            else {
              try {
                sleep(idleMillis);
              catch (InterruptedException e) {
                fireThreadException(e);
        else {
          // error: Thread is not ready to run
        setStatus(STATUS_THREAD_FINISHED);
       * stop this thread. This will terminate the thread irrevokably. Use method
       * <code>haltThread</code> to pause a thread with the possiblity to resume work later.
       * @see haltThread
      public void stopThread() {
        switch (status) {
          case STATUS_RUNNING:
            setStatus(STATUS_STOP_PENDING);
            break;
          case STATUS_HALT_PENDING:
            // exception: the thread already is about to halt
            break;
          case STATUS_STOP_PENDING:
            // exception: the thread already is about to stop
            break;
          default:
            // exception: a thread can not be stopped, when it is not running
            break;
       * halt this thread, i.e. pause working allowing to resume later
       * @see resumeThread
      public void haltThread() {
        switch (status) {
          case STATUS_RUNNING:
            setStatus(STATUS_STOP_PENDING);
            break;
          case STATUS_HALT_PENDING:
            // exception: the thread already is about to halt
            break;
          case STATUS_STOP_PENDING:
            // exception: the thread already is about to stop
            break;
          default:
            // exception: a thread can not be halted, when it is not running
            break;
       * resume this thread, i.e. resume previously halted work
       * @see haltThread
      public void resumeThread() {
        if(status == STATUS_HALTED || status == STATUS_HALT_PENDING) {
          setStatus(STATUS_RUNNING);
        else {
          // exception: only halted threads or threads that are about to halt can be resumed
       * this is the method to prepare a thread to run. It is not implemented in this abstract
       * class. Subclasses of <code>InfoThread</code> can implement this method to do anything
       * that might be required to put their thread into STATUS_READY. This method is called
       * automatically by method <code>start</code>.  When implementing this method, it should
       * call method <code>fireThreadException</code> accordingly.
       * @see start
       * @see fireThreadException
      protected void prepareThread() {
        // does nothing in this abstract class but might be needed in subclasses
       * this is the main activity method of this object. It is not implemented in this abstract
       * class. Subclasses of <code>InfoThread</code> must implement this method to do something
       * meaningful. When implementing this method, it should call methods
       * <code>fireThreadProgress</code> and <code>fireThreadException</code> accordingly.
       * @return boolean true, if work is left, false if not
       * @see fireThreadProgress
       * @see fireTreadException
      protected abstract boolean work();
       * add an <code>InfoTreadListener</code> to this instance of <code>InfoThread</code>
       * @param l InfoThreadListener  the listener to add
       * @see removeInfoThreadListener
      public void addInfoThreadListener(InfoThreadListener l) {
        listeners.add(l);
       * remove an <code>InfoTreadListener</code> from this instance of <code>InfoThread</code>
       * @param l InfoThreadListener  the listener to remove
      public void removeInfoThreadListener(InfoThreadListener l) {
        listeners.remove(l);
       * notify all <code>InfoThreadListener</code>s of a status change
       * @param fromStatus int  the status tis thread had before the change
       * @param toStatus int  the status this thread has now
      protected void fireThreadStatusChanged(int fromStatus, int toStatus) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadStatusChanged(this, fromStatus, toStatus);
       * notify all <code>InfoThreadListener</code>s of an exception in this thread
       * @param ex Exception  the exception that occurred
      protected void fireThreadException(Exception ex) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadException(this, ex);
       * notify all <code>InfoThreadListener</code>s of the progress of this thread
       * @param progressValue long  a value indicating the current thread progress
      protected void fireThreadProgress(long progressValue) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadProgress(this, progressValue, maxValue);
       * set the status of this thread and notify all listeners
       * @param newStatus int  the status this thread is to be changed to
      private void setStatus(int newStatus) {
        //System.out.println("InfoThread.setStatus oldStatus=" + status + ", newStatus=" + newStatus);
        int fromStatus = status;
        status = newStatus;
        fireThreadStatusChanged(fromStatus, newStatus);
       * get the current status of this thread
       * @return int  the status
      public int getStatus() {
        return status;
       * cleanup before actual destruction.
      public void destroy() {
        //System.out.println("InfoThread.destroy");
        cleanup();
        super.destroy();
       * cleanup all references this thread maintains
      private void cleanup() {
        //System.out.println("InfoThread.cleanup");
        listeners.removeAllElements();
        listeners = null;
      /* ----------------------- class fields start ------------------------ */
      /** storage for the objects this thread notifies about status changes and progress */
      private Vector listeners = new Vector();
      /** indicator for the status of this thread */
      private int status = STATUS_NONE;
      /** maximum value for threadProgress */
      protected long maxValue = -1;
      /** the idle time inside one work cycle in milliseconds */
      protected long idleMillis = 1;
      /* ----------------------- class fields end -------------------------- */
      /* ----------------------- constants start --------------------------- */
      /** constant value indicating that no status has been set so far */
      public static final int STATUS_NONE = 0;
      /** constant value indicating that the thread is currently initializing */
      public static final int STATUS_INITIALIZING = 1;
      /** constant value indicating that the thread is ready to run */
      public static final int STATUS_READY = 2;
      /** constant value indicating that the thread is running */
      public static final int STATUS_RUNNING = 3;
      /** constant value indicating that the thread is about to halt */
      public static final int STATUS_HALT_PENDING = 4;
      /** constant value indicating that the thread is halted */
      public static final int STATUS_HALTED = 5;
      /** constant value indicating that the work of this thread is complete */
      public static final int STATUS_WORK_COMPLETE = 6;
      /** constant value indicating that the thread is about to stop */
      public static final int STATUS_STOP_PENDING = 7;
      /** constant value indicating that the thread is stopped */
      public static final int STATUS_STOPPED = 8;
      /** constant value indicating that the thread is finished */
      public static final int STATUS_THREAD_FINISHED = 9;
      /* ----------------------- constants end --------------------------- */
    }this is the InfoThreadListener interface
    * Light Development Java Library
    * Copyright (C) 2003, 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.util;
    * An interface classes interested to receive events from objects
    * of class <code>InfoThread</code> need to implement.
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public interface InfoThreadListener {
       * method to receive a status change notification from a thread
       * @param thread InfoThread  the thread which status changed
       * @param fromStatus int  the status which the thread had before the change
       * @param toStatus int  the status which the thread has now
      public void threadStatusChanged(InfoThread thread, int fromStatus, int toStatus);
       * method to receive a notification about the progress of a thread
       * @param thread InfoThread  the thread which notified about its progress
       * @param progressValue long  the value (e.g. 10 if 100 percent completed, 20 of 1 million files processed, etc.)
      public void threadProgress(InfoThread thread, long progressValue, long maxValue);
       * method to receive a notifiaction about the fact that an exception occurred in a thread
       * @param thread InfoThread  the thread for which an exception occurred
       * @param e Exception  the exception that occurred
      public void threadException(InfoThread thread, Exception e);
    }This is class AudioFileDescriptor
    * Light Development Java Library
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.audio;
    import java.io.FileNotFoundException;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    import java.io.Serializable;
    import java.text.DecimalFormat;
    * This class models characteristics of an audio file such as the absolute path
    * of the file, its tag contents (if any) and the play duration, etc.
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public class AudioFileDescriptor implements Serializable, Comparable {
      public AudioFileDescriptor(String absolutePath) throws FileNotFoundException, IOException {
        load(absolutePath);
      public boolean equals(Object o) {
        if(o != null && o instanceof AudioFileDescriptor) {
          return ((AudioFileDescriptor) o).getAbsolutePath().equalsIgnoreCase(this.getAbsolutePath());
        else {
          return false;
      public void load(String absolutePath) throws FileNotFoundException, IOException {
        this.absolutePath = absolutePath;
        RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
        if(id3v11Tag == null) {
          id3v11Tag = new ID3v11Tag(rf, false);
        else {
          id3v11Tag.readTag(rf, rf.length() - 128);
        rf.close();
      public String getAbsolutePath() {
        return absolutePath;
      public ID3v11Tag getID3v11Tag() {
        return id3v11Tag;
      public void setID3v11Tag(ID3v11Tag tag) {
        this.id3v11Tag = tag;
      public String toString() {
        DecimalFormat df = new DecimalFormat("00");
        return id3v11Tag.getArtist() + ", " + id3v11Tag.getAlbum() + " - " +
            df.format(id3v11Tag.getTrackNumber()) + " " + id3v11Tag.getTitle();
       * Compares this object with the specified object for order.
       * @param o the Object to be compared.
       * @return a negative integer, zero, or a positive integer as this object is less than, equal to,
       *   or greater than the specified object.
       * @todo Implement this java.lang.Comparable method
      public int compareTo(Object o) {
        return toString().compareTo(o.toString());
      private String absolutePath;
      private ID3v11Tag id3v11Tag;
      private transient long duration = -1;
      private transient int type = TYPE_UNKNOWN;
      public static final transient int TYPE_UNKNOWN = 0;
      public static final transient int TYPE_MP3 = 1;
    }This is class ID3V11Tag into which the data is actually stored
    * Light Development Java Library
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.audio;
    import java.io.File;
    import java.io.RandomAccessFile;
    import java.io.IOException;
    import java.io.Serializable;
    import java.text.DecimalFormat;
    * This class is a very simple implementation of an ID3v11Tag. It models an ID3 tag
    * pretty much the same way as it is physically stored inside an audio file.
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public class ID3v11Tag implements Serializable, Comparable {
       * construct an ID3v11Tag and read tag content from a given file
       * <p>This constructor can be used for cases where a RandomAccessFile has already
       * been opened and will be closed elsewhere</p>
       * @param rf RandomAccessFile  the open file to read from
       * @param isAtTagStartPos boolean  true, if the file pointer is at the
       * position where the ID3 tag starts; when false, the pointer is positioned accordingly here
       * @throws IOException
      public ID3v11Tag(RandomAccessFile rf, boolean isAtTagStartPos) throws IOException {
        if(isAtTagStartPos) {
          readTag(rf);
        else {
          readTag(rf, rf.length() - 128);
       * construct an ID3v11Tag and read tag content from a file at a given location
       * <p>This constructor opens and closes the audio file for reading</p>
       * @param absolutePath String  the absolute path to the audio file to open
       * @throws IOException
      public ID3v11Tag(String absolutePath) throws IOException {
        RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
        readTag(rf, rf.length() - 128);
        rf.close();
       * construct an ID3v11Tag and read tag content from a given file
       * <p>This constructor opens and closes the audio file for reading</p>
       * @param audioFile File  the audio file to read from
       * @throws IOException
      public ID3v11Tag(File audioFile) throws IOException {
        this(audioFile.getAbsolutePath());
       * get a string representation of this object
       * @return String
      public String toString() {
        DecimalFormat df = new DecimalFormat("00");
        return getArtist() + ", " + getAlbum() + " - " + df.format(getTrackNumber()) + " " + getTitle();
       * position to file pointer and read the tag
       * @param rf RandomAccessFile  the file to read from
       * @param jumpPos long  the position to jump to (the tag start position)
       * @throws IOException
      public void readTag(RandomAccessFile rf, long jumpPos) throws IOException {
        rf.seek(jumpPos);
        readTag(rf);
       * read the tag from a given file, assuming the file pointer to be at the tag start position
       * @param rf RandomAccessFile  the file to read from
       * @throws IOException
      public void readTag(RandomAccessFile rf) throws IOException {
        rf.read(tagBuf);
        if(tag.equalsIgnoreCase(new String(tagBuf))) {
          rf.read(title);
          rf.read(artist);
          rf.read(album);
          rf.read(year);
          rf.read(comment);
          rf.read(trackNo);
          rf.read(genre);
      public String getTitle() {
        return new String(title).trim();
      public String getArtist() {
        return new String(artist).trim();
      public String getAlbum() {
        return new String(album).trim();
      public String getYear() {
        return new String(year).trim();
      public String getComment() {
        return new String(comment).trim();
      public int getGenreId() {
        try {
          int id = new Byte(genre[0]).intValue();
          if(id < GENRE_ID_MIN || id > GENRE_ID_MAX) {
            return GENRE_ID_OTHER;
          else {
            return id;
        catch(Exception ex) {
          return GENRE_ID_OTHER;
      public String getGenreName() {
        return genreNames[getGenreId()];
      public int getTrackNumber() {
        try {
          return (int) trackNo[0];
        catch(Exception e) {
          return 0;
       * Compares this object with the specified object for order.
       * @param o the Object to be compared.
       * @return a negative integer, zero, or a positive integer as this object is less than, equal to,
       *                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Hi Franck,
    thank you, mate. I did what you suggested (changed class attached) but that did not change the mentioned behaviour.
    The first run is approximately 75 seconds with Java option -Xms40m and approx. double without, the second run and all subsequent runs are only 2-3 seconds each (!!!) even when terminating and re-starting the application between thread runs.
    I'm pretty clueless about that, any more help on this anyone?
    Thanks a lot and best regards
    Ulrich
    PS: BTW, I forgot to post the class that is filled with data by class CollectionThread, so here it is
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import java.io.File;
    import com.lightdev.lib.audio.ID3v11Tag;
    import javax.sound.sampled.UnsupportedAudioFileException;
    import java.io.IOException;
    import java.io.Serializable;
    import com.lightdev.lib.audio.AudioFileDescriptor;
    import com.lightdev.lib.ui.SortListModel;
    import java.util.Iterator;
    * Storage model for audio data.
    * <p>
    * <code>AudioDataModel</code> can be used to store ID3 tag data collected from
    * a directory with audio files to perform queries and reports on the found data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 15, 2004
    public class AudioDataModel extends SortListModel implements Serializable {
       * constructor
      public AudioDataModel() {
       * add an audio track from a given audio file
       * <p>This will attempt to read ID3 tag data from the file.</p>
       * @param audioFile File  the file to add audio data for
       * @throws IOException
      public void addTrack(File audioFile) throws IOException {
        AudioFileDescriptor afd = new AudioFileDescriptor(audioFile.getAbsolutePath());
        if (!data.contains(afd)) {
          data.add(afd);
       * get all tracks for agiven combination of genre name, artist name and album name. Any of
       * the parameters may be null or AudioDataModel.FILTER_ALL
       * <p>Ugly code, I know, but it simply hard codes all combinations of the the mentioned
       * parameters. Any more elegant implementations welcome.</p>
       * @param genreName String  a genre name to get tracks for
       * @param artistName String  an artist name to get tracks for
       * @param albumName String  an album name to get tracks for
       * @return SortListModel   the found tracks in a list model
      public SortListModel getTracks(String genreName, String artistName, String albumName) {
        SortListModel foundTracks = new SortListModel();
        Iterator e = data.iterator();
        while(e.hasNext()) {
          AudioFileDescriptor afd = (AudioFileDescriptor) e.next();
          ID3v11Tag tag = afd.getID3v11Tag();
          if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
            if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
              if (tag.getAlbum().equalsIgnoreCase(albumName))
                foundTracks.add(afd);
            else {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getArtist().equalsIgnoreCase(artistName))
                  foundTracks.add(afd);
              else {
                if (tag.getArtist().equalsIgnoreCase(artistName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
          else {
            if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getGenreName().equalsIgnoreCase(genreName))
                  foundTracks.add(afd);
              else {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
            else {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getArtist().equalsIgnoreCase(artistName))
                  foundTracks.add(afd);
              else {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getArtist().equalsIgnoreCase(artistName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
        foundTracks.sort();
        return foundTracks;
       * list all artists in this model
       * @return SortListModel
      public SortListModel listArtists() {
        SortListModel artists = new SortListModel();
        artists.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String artistName = tag.getArtist();
          if (artists.indexOf(artistName) < 0) {
            artists.add(artistName);
        artists.sort();
        return artists;
       * list all artists in this model having titles belonging to a given genre
       * @param genreName String  name of the genre artists are searched for
       * @return SortListModel
      public SortListModel listArtists(String genreName) {
        SortListModel artists = new SortListModel();
        artists.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String artistName = tag.getArtist();
          String genre = tag.getGenreName();
          if (artists.indexOf(artistName) < 0 && genre.equalsIgnoreCase(genreName)) {
            artists.add(artistName);
        artists.sort();
        return artists;
       * list all genres in this model
       * @return SortListModel
      public SortListModel listGenres() {
        SortListModel genres = new SortListModel();
        genres.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String genreName = tag.getGenreName();
          if (genres.indexOf(genreName) < 0) {
            genres.add(genreName);
        genres.sort();
        return genres;
       * list all albums in this model
       * @return SortListModel
      public SortListModel listAlbums() {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          if (albums.indexOf(albumName) < 0) {
            albums.add(albumName);
        albums.sort();
        return albums;
       * list all albums in this model having titles belonging to a given genre
       * @param genreName String  name of the genre albums are searched for
       * @return SortListModel
      public SortListModel listAlbums(String genreName) {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          String genre = tag.getGenreName();
          if (albums.indexOf(albumName) < 0 && genre.equalsIgnoreCase(genreName)) {
            albums.add(albumName);
        albums.sort();
        return albums;
       * list all albums in this model having titles belonging to a given genre and artist
       * @param genreName String  name of the genre albums are searched for
       * @param artistName String  name of the artist albums are searched for
       * @return SortListModel
      public SortListModel listAlbums(String genreName, String artistName) {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          String genre = tag.getGenreName();
          String artist = tag.getArtist();
          if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
            if (albums.indexOf(albumName) < 0 &&
                artist.equalsIgnoreCase(artistName))
              albums.add(albumName);
          else {
            if (albums.indexOf(albumName) < 0 &&
                genre.equalsIgnoreCase(genreName) &&
                artist.equalsIgnoreCase(artistName))
              albums.add(albumName);
        albums.sort();
        return albums;
       * get the number of audio tracks stored in this data model
       * @return int  the number of tracks
      public int getTrackCount() {
        return data.size();
      /** constant to select all items of a given part */
      public static final String FILTER_ALL = "    all";
    }...and here the changed CollectionThread now caching found File objects in a vector
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import com.lightdev.lib.util.InfoThread;
    import java.io.File;
    import java.util.Vector;
    import java.util.Enumeration;
    * A class to collect audio data from a given storage location.
    * <p>
    * <code>CollectionThread</code> uses ID3 tag information to gain data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 13, 2004
    public class CollectionThread extends InfoThread {
       * constructor
       * @param model  AudioDataModel  the data model to collect data to
      public CollectionThread(AudioDataModel model) {
        this.model = model;
       * constructor, creates a new empty AudioDataModel
      public CollectionThread() {
        this(new AudioDataModel());
       * set the data model to collect data to
       * @param model AudioDataModel  the model to collect data to
      public void setModel(AudioDataModel model) {
        this.model = model;
       * get the data model associated to this thread
       * @return AudioDataModel  the data model
      public AudioDataModel getModel() {
        return model;
       * set the directory to collect data from
       * @param rootDir File  the directory to collect data from
      public void setRootDirectory(File rootDir) {
        this.rootDir = rootDir;
       * this is the method to prepare a thread to run.
      protected void prepareThread() {
        maxValue = -1;
        filesProcessed = 0;
        innerCount = 0;
        fileList = new Vector();
       * do the actual work of this thread, i.e. iterate through a given directory
       * structure and collect audio data
       * @return boolean  true, if work is left
      protected boolean work() {
        boolean workIsLeft = true;
        if(getStatus() < STATUS_HALT_PENDING) {
          countElements(rootDir.listFiles());
        if(getStatus() < STATUS_HALT_PENDING) {
          workIsLeft = collect(); //collect(rootDir.listFiles());
          fileList.clear();
          fileList = null;
        return workIsLeft;
       * count the elements in a given file array including its subdirectories
       * @param files File[]
      private void countElements(File[] files) {
        int i = 0;
        while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
          File file = files;
    if (file.isDirectory()) {
    countElements(file.listFiles());
    else {
    fileList.add(file);
    i++;
    maxValue++;
    * read data into model
    * @param files File[] the file array representing the content of a given directory
    * @return boolean true, if work is left
    private boolean collect(/*File[] files*/) {
    Enumeration files = fileList.elements();
    while(files.hasMoreElements() && getStatus() < STATUS_HALT_PENDING) {
    File file = (File) files.nextElement();
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    filesProcessed++;
    if(++innerCount > 99) {
    innerCount = 0;
    fireThreadProgress(filesProcessed);
    return false;
    int i = 0;
    while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
    File file = files[i];
    if(file.isDirectory()) {
    collect(file.listFiles());
    else if(file.getName().toLowerCase().endsWith("mp3")) {
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    i++;
    filesProcessed++;
    fireThreadProgress(filesProcessed);
    return (i<files.length);
    /** the directory to collect data from */
    private File rootDir;
    /** the data model to collect data to */
    private AudioDataModel model;
    /** the number of files this thread processed so far while it is running */
    private long filesProcessed = 0;
    /** a list to temporary store found files */
    private Vector fileList;
    /** counter to determine when to fire progress messages */
    private int innerCount = 0;

  • TS1702 I need some help the apps were downloading slowly

    The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
    The iOS 6 update didn't work.
    Please I need some help.
    The apps didn't download.
    Talking Angela and Ginger didn't download.
    Talking Santa didn't update.

    Try moving the existing backup file to a safe location so that iTunes has to create an entire new file.  The backup file is located here. You can delete that backup once you get a successfull backup.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

  • I'm suddenly in need of help with my Firefox browser (6.0.2)

    Hi there,
    I'm suddenly in need of help with my Firefox browser (6.0.2)
    (OS: I use Windows XP).
    When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
    I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
    This problem started today, 8th September, 2011 and has never happened before.
    Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
    I've also noted that just before I "open up" Firefox, I now get a small box saying:
    [JAVASCRIPT APPLICATION]
    Exc In Ev handl: TypeError: This oRoot.enable is not a function
    This has never appeared before - I hope it offers a clue a to what is wrong.
    The Browser is not stuck in Safe Mode, by the way.
    Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
    (A friend is sending this query on my behalf from their pc)
    Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
    If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
    In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
    Many thanks in advance.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • Letter/report generation...morgalr, i need your help!!

    may i know the details or some sample source code of how to generate the html and import it to MS Word...i need your help urgently...may i have your email to contact u?.....please help, it is urgent!!!

    You need not use an applet to write an HTML file, any application file will do fine, actually applications may be prefered due to system security and file creation. Basically the html files are just text files using HTML. Look at any book on HTML and you will be able to get the style and form down along with the syntax.
    As for calling MS word, do a search on the web for a product called JPrint. It is done by a company called Neva and they also have a product called "coroutine". It is coroutine that you want. Coroutine is a native level interface for Java to Comm. The docs that come with coroutine should be saficient to get you going on the project.

Maybe you are looking for

  • How to reprogram my apple TV remote ??

    Hi, somebody can help me to reprogram my apple tv remote control, or how can i connect my apple tv to the internet with my remote app on my ipad??

  • [Solved] Difficulty getting digital audio to play in all applications

    This is probably a noobish question... My motherboard supports digital audio out via S/PDIF cable (optical), as well as standard analog audio. I have a stereo receiver that I've plugged my optical cable into. When I go to systemsettings > Multimedia

  • Is it possible to store text in a table(colom) without losing the layout

    hello, I have a question and the question is: Is it possible to store text in a table(colom) without losing the layout? For the people who don't know what i presicly mean i will explain my question: Think of a memo field, i write a memo with bij exam

  • How to install MapViewer

    I successfully install ApplicationServer9.0.2 and I want to install MapViewer. When I try conect to Enterprise Menager console I must type username and password. What is the username and password

  • Panasonic TC-L42U12 questions

    Hello, I am planning on buying the Panasonic TC-L42U12 this next month. Anyone from here has any experience or feedback on this TV? I am planning to use it mainly for playing videogames (X360 and PS3), some movies (DVD and BluRay) and that's about it