Kanban from WM w. transfer requirements

Our kanban material is in units of measure KGs and the issue is that the actual qty is more times than not is different from the requested qty (kanban qty in the control/cycle). Changing the kanban status from WAIT to EMPTY using PKBC or PK21 and populating the actual qty field doesn't have any effect. The TR is created with the control/cycle qty (requested qty).
Using Replenishment Strategy 0006 Kanban from WM w. transfer requirements is there a way to use PKBC or PK21 to change the replenishment qty (requested qty) to actual qty, and if not what would be a good pratical procedure change the qty.
Thanks in advance for any help.

Hi,
The actual quantity is the quantity that is in the container when the status is set to "full". You can set this qty in PKBC or PK21 when you set the status from wait to empty.
if teh GR receited at the container contains less / more qty than requestd qty then this actual qty is popultaed from TR confirmation.
I think in this case you need to change the reqyested qty in the kanban itself.
Also check if you can utilize claculate automatic calculation of kanban qty function using calculation profile in kanban functioanlity.
Regards,
Santosh Sarda

Similar Messages

Incorrect UoM Conversion on Transfer Requirement from Production Order

I have a Question on a Production Order that created a Transfer Requirement. Looking at the Components of the BOM within the Production Order, I have a Material where the Issue Unit of Measure is QT and the Base Unit of Measure is EA, with a Quantity of 1. In the Material Master Alternate Unit of Mesaures, the Conversion is setup so that 1 QT = 1 EA. The question of why the 1 for 1 conversion is not relevant, as this is just how the material was setup and I know it does not make any sense. When the Transfer Requirement is created it is showing that 1 Qt = .25 EA. I am unable to locate where this conversion is coming from. We do not want to lose visibility of this part number, as creating a new part number with a Base Unit of Measure of QT would fix the problem.
Is there anywhere in configuration where there could possibily be a Conversion? I have looked at Control Cycles and the Reference Operation Set and do not see anything.

Closing Thread as there has been no responses but I am still looking for a solution. The only possibility that exists at this time is the material was copied from another material and the UoM Conversion was 1 QT = 4 EA on the Copy From Material. I can not see where any changes were made to the unit measure conversion for the new material. The only other possibility is the Production Order was manually converted to the new material incorrectly.

FM to create a Transfer Order from Transfer requirement

Hi all,
Can you please send me the FM to create the TO from Transfer requirement No with some code.
Thanks & Regards,
Sreeman

Hi
Use the fun module
L_TO_CREATE_TR
for your requirement
see the std programs where it is used and do accordingly
LLCMBF23
LLSAMF0R
RLAUTAT0
Regards
Anji

Transfer Requirement not getting created

Hi All,
My query as below;
Production order is created using KANBAN (Control Cycle/Supply Area is defined) using classic KANBAN.
WM is in place and all the setting related to TR/TO creation for WM movement type 103 is in place.
When i am trying to receive this Production after completion it is not creating the TR/TO, while as material document is getting generated and shows the stock directly in interim storage type 901 without creating TR and TO.
Further i checked there is indicator in Production order i.e "Kanban indicator" that gets checked automatically when Production order is created using KANBAN Processs and if i remove that indicator forcefully, TR and TO is getting created normally.
Please provide some inputs where can be the problem and how TR and TO can be created normally eventhough KANBAN indicator is checked in Production order and where i can found the setting related to "KANBAN INDICATOR".
Appreciate your help.

Hi Maddy
Thanks very much for your response.
1. When you use KANBAN, you define separate KANBAN storage location, which is different from WM-managed replenishment storage locations, and separate KANBAN interim storage area with storage bin.
Yes different storage location is defined which is not WM-managed in supply area.
As you said Control Cycle is defined, see if the interface is properly defined for both of these Sloc.
Where i can check whether interface is properly defined or not.
2. See if you have defined the KANBAN replenishment strategy with Control type Transfer Requirements from a Storage Location which is being controlled by WM in the Customizing for Production under KANBAN > Replenishment Strategies > Define Stock Transfer Strategies
Actually for a material two strategies are defined like;
1) In-house Production strategies-0003-
supply area is defined with storage location which is IM managed.
And when this order is completed and i am trying to receive this in WM SLOC (usally whatever SLOC we have defined in supply area it proposes that SLOC at the time of receipt but i am changing this manually to WM managed SLOC) using transaction MIGO, it is directly taking the stock to 901 interim storage type and in total the stock increases but the problem is when TR is not getting created i am not able to take this to the storage bin as per strategies defined.
2) Stock Transfer Strategies-This is working fine and in that TR/TO is working fine.
3. For TO to get created automatically by the system from the transfer requirement, see if an indicator Automatic TO creation in the replenishment strategy is set or not. Yes this is set for stock transfer strategies but i didn't find option to check the TO creation automatically for in-house production strategy
4. Also, check that you have set up a suitable replenishment movement type for KANBAN in the Customizing for Warehouse Management under Activities > Transfers > Define Movement Types (i.e.standard is 350 for KANBAN replenishment)-Yes this is also defined correctly.
Appreciate your more inputs on this.

WM - Display Transfer Requirements in LB10

I am new at WM and trying to learn as I go. When using LB10 to dipslay Open Transfer Requirements, I am having a problem that I can not solve. There are items appearing as Open Transfer Requirements, but the the Auto TO Creation Flag is set to 1. I have checked the Control Cycle and compared it to seveal different Part NUmbers which are working correclty and I can not see any differences. The problem does appear to be common to 1 supply area only. The Transfer Requirement is being generated from PK13N, the KANBAN Board. Thanks in advance.

I have figured out why the items were showing the Auto TO Creation Flag as being set to 1, but yet the Transfer Posting was not taking place, thus the item was appearing in LB10.   The culprit is the FM being called below in a background task.
CALL FUNCTION 'L_COMMUNICATION_TO_CREATE' IN BACKGROUND TASK
   AS SEPARATE UNIT
The problem was that there were several items stuck in the qRFC for this Supply Area. Once I cleared the RFC Queue everything began working properly for this Supply Area and I haven't had a problem since.

Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

Transfer Requirement with Inbound delivery.

Hi Guys,
I have the following problem:
The Warehouse is HU managed.
When I have a Purchase Order and I do a Goods Receipt the system is creating a Material Document and in addition a Transfer Requirement.
But
When I have a Purchase Order and I have an Inbound Delivery, before I can do my Post Goods Receipt I have to do my TO creation and confirmation.
In IMG under Handling Unit Management > Basics > Delivery > Define Sequence of Transfer Order - Goods Receipt I can make my settings so that I can do my Post Goods Receipt before my TO creation and confirmation.
This means that I have again first a Material Document. Only in this scenario I do not get a TR, although in the WM - IM interface for movement 101 TR creation is set to X.
How can I get my TRs?
Thanks in advance for your help.

Answers to your questions:
Yes Yes No.
The MIGO transaction is there to do the GR at the moment the truck is at your door, the inbound delivery transaction (VLxxx) is there to have an ASN creating the inbound delivery days before the truck will arrive. To avoid open TRs sitting there for days, the system normally doesn't create the TRs. The posting of the GR (and the availability for MRP etc) can only be done after the TOs are created and confirmed. If you look at an inbound delivery under the subsequent functions it says "create TO".
So you create TO from the inbound delivery and after that you post the GR.
Only, there is a way to turn around the sequence (when using HUs) but then the Mat Doc is created and not a TR.
We need the TR to be send by IDOC to another system.

WM: Transfer Requirements with just one item

Hi experts,
does anybody know if it is possible to customize WM in order to create just one item per transfer requirement.
My problem is that in material staging from PP, I have customized creation of transfer requirements on order release. If OF consist of three components, system create one transfer requirement with 3 items, nevertheless I need to create 3 transfer requirement.
Thanks

No std funcationality available but i have done in the Past using the PO item user exit to force the user to enter the one line item PO only or the same item in the next line.
so with the developement it is possible

GR miss transfer requirment, how to picking it to bin. Manul TO failed.

Due to wrong customizing , GR for return purchase order did not create Transfer requirment automatically. MVT is 161.
the goods is recored in interim storage area 916 and WM mvt is 601.
currently , because of no TR, i cannot create transfer order to putaway from acture bin.
i try to create TO for GR material document with T-code LS06, but it is failed , i encounter below error.
"You have not selected any data for the material document 520105801
Message no. L2030"
Expert ,please help me to soft this issue.
thanks for your help.

In LT01,whether MVT 999 is ok?
In standard system, mvt 999 is used.
In LT10, symbol "Lock" in material, i cannot select item. how can i unlock it?
I don't know what you are doing. If a quant is locked you cannot move it.
I hope you are not trying to move the -quant which is in storage type 916. You should find the corresponding +quant in a "normal" storage type and move it to the -quant, to 916.
You can find information e.g. on SAP online help, answered threads about LT01/LT10 and about how to eliminate -quants in interim storage types.
Edited by: Csaba Szommer on Aug 30, 2011 8:53 AM

RE: Auto-closed all open Transfer requirements

User sometimes uses LT10 to move stock from Receiving area to bin.
Because of this, there are many open Transfer requirement.
Is there a way the system will closed off the transfer requirement?
In which User exit can this routine be setup?
Thanks
bye

One way of doing this is by marking open transfer requirements as completed in transaction LL01 (warehouse activity monitor).
To run the warehouse activity monitor, you will have to define the variants in customizing.
When you get this report running, double click on the line for 'Open Transfer Requirements'. In the next screen, click on the button 'TR status deliv. completed.'
Another was is to do this individually in transaction LB02.
To my knowledge, there is no user exit to automate this. Perhaps you can write a custom BDC on LL01 transaction and run the program on regular intervals (PS this way you may end up closing genuine or un-processed Transfer Requirements as well!)
Regards
Baseer

MIGO 101 -- create one transfer requirement (TR) for several GI postings

Hi,
here is a problem I want to solve:
- When we are receiving our finished goods we do several (consecutive) postings, e.g. 2x50 for a total of 100.
- The total (100) is managed in one batch.
- Currently we get one transfer requirement (TR) for each GR posting
- Instead we want to cumulate all quantities posted into one TR (in order to create one transfer order from it).
Is there a standard SPRO setting for this?
Is there a user exit for this?
Thanks for any hints / ideas.
Andreas

The problem was resolved.
Thanks in advance

Open Transfer Requirements for Mvmt 261 in LL01

Hi all
We recently made a change to our warehouse structure by reassigning storage types from an earlier storage location A to a storage location B. These storage types involve Production Supply areas (PSAs) and also storage areas for raw materials.
After the change we have ended up with roughly 2000 open transfer requirements related to movement type 261 GI to order. They all show up as critical processes in LL01 (Warehouse Activity Monitor)
Does anyone know what could be the reason
Thanks a lot

Before you change your structure of wharehouse you need to clean up all the pending document otherwise you will be in trouble like you have now.
so please clear all the document first.

Bapi for create transfer requirement   - LB01

Dear friends:
   Is there BAPI to create transfer requirement?
   Thanks!
   Regards
   Samuel

hi
good
try this
BAPI_FIXEDASSET_OVRTAKE_CREATE BAPI for Legacy Data Transfer
BAPI_INTERNALORDER_CREATE      Create Internal Order From Transferred Data
BAPI_PDTRANSCO_CHECKACTINPUT   Plan data transfer: Check activity input
http://www.planetsap.com/LIST_ALL_BAPIs.htm
thanks
mrutyun^

User Exit / BADI for Transfer Requirement Create

Hi All,
I have looked into the system and i could not find any User Exit or BADI for creation of Transfer requirement. This is for manual creation through LB01 and not interface with PP or IM. I am aware of the Userexits available for those, but i could not find any for WM TR Manual creation.
Let me know if you are aware of any.
Thanks
Jithin

When you create a transfer requirement, i want to make it mandatory to enter the destination bin, for example. The Transfer Requirement should not be saved if it is not entered.
I know we can do this by creating multiple movement types for each destination, but i want to know if there is a way where the user can enter the destination when creating a TR with a single movement type.
Jithin

Creation of transfer requirement when posting material document

Hi
I've copied standard movement 311 into 911 but i need another behaviour on this new mov. I use this mov in trx MB21 in order to create a reservation. When I post it in MIGO, I need to create a transfer requirement instead a Posting Change Notice. I think I could modify this on SPRO: Logistics Execution -> Warehouse Management -> Intefaces -> Stocks management -> Movement Classes
but i don't know exactly what to do.
Can anyone help me?
Thanks and regards

Hi,
You can create TR for your mov.type 911 in the below mentioned settings.
SPRO - LE - WM - Interfaces - Inven. Mgmt - Define Mov.types - LE-WM Interface to Inventory Management
Set the indicator as X in the TR column & remove the tick in the posting change option.
Hope its clear,
Regards,

Kanban from WM w. transfer requirements

Similar Messages

Maybe you are looking for