KDE shutdown/reboot issue

I've had this issue for ages, hope I can explain it clearly enough.  Two people use my computer, when both are logged in, and the person who logged in first logs out, then the second person tries to restart or shut down, it doesn't work properly.  It just shows a flashing cursor, but if the person manually switches to vt1 the shutdown/restart continues as normal.  It's not a major deal just annoying.  Had the issue with KDE 4.6 and it continues with 4.7.  KDE starts via inittab.

I've managed to reproduce this in virtualbox, anyone care to shed any light before I attempt a bug report?

Similar Messages

  • [SOLVED] LXDM Shutdown/Reboot Issues

    Under "vanilla" conditions (unmodified /etc/lxdm/lxdm.conf), I have no trouble logging in and out and powering off/rebooting using LXDM.
    My problem seems to arise when I set my main user account to autologin.  The autologin works as expected, and I log back out to LXDM just fine.  After logging out, there is a "username" text field replacing the large user boxes, which is a little out-of-place but isn't my main concern.
    If I try to shutdown or reboot, nothing will happen, and I give it a second just to make sure it isn't taking place in a tty or something odd like that (checked my running tty's just to be sure).  Afterward, I log back in to my main account, and upon logging out once more, the system proceeds to power off.
    The only time I've been able to reproduce it was with the autologin enabled.  Possibly worth noting is my /etc/lxdm/PostLogout, which contains this snippet from the LXDM ArchWiki Page:
    #!/bin/sh
    # Kills all your processes when you log out.
    killall --user $USER -TERM
    May not be very much related, but it is the only other change I have made to LXDM.  However, it had no adverse effects on the shutdown/reboot post-logout functionality with the autologin disabled.
    I would be very grateful if someone could point me in the right direction for fixing this bizarre behavior.
    Last edited by mellowmaroon (2012-06-11 15:18:34)

    I ended up adding /sbin/reboot to /etc/lxdm/PreReboot, and /sbin/poweroff to /etc/lxdm/PreShutdown.
    It's more of a workaround than a solution, but it seems like the easiest and most effective solution so far.  No problems with it yet.

  • [SOLVED] New slim, can't shutdown|reboot|suspend anymore

    Hi!
    I just upgraded slim, and i notice that i cannot suspend, shutdown and reboot anymore.
    And to mount usb drive, i am asked for my password.
    After the upgrade i changed /etc/slim.conf,pacnew to suit my needs and then sudo mv /etc/slim.conf.pacnew /etc/slim.conf .
    My .xinitrc is the same, so, where is the problem?
    here there are my slim.conf:
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    login_cmd exec /bin/bash -login ~/.xinitrc %session
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    sessions xfce4,icewm-session,wmaker,blackbox
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    default_user federico
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    #focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    auto_login yes
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    current_theme default
    # Lock file
    lockfile /var/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    and my .xinitrc:
    #!/bin/bash
    export BROWSER=chromium
    export DE=xfce
    exec ck-launch-session dbus-launch startxfce4
    Thanks!
    Last edited by nierro (2012-05-08 18:42:44)

    From later in this thread:
    Solution
    Ok, do:
    ck-list-sessions
    There were two sessions for myself.  So, the new slim is starting your exec line already with a console kit session.  This is new behavior.  It didn't before.
    So, I modified my exec line to remove "ck-launch-session" in .xinitrc to:
    exec dbus-launch --exit-with-session startxfce4
    Reverted the changes I made to the shutdown/restart policy and rebooted.  Shutdown, restart, mounting USB drive: they all work again now.
    Edit: from even later on in this thread, just:
    exec startxfce4
    As your .xinitrc exec line should be sufficient for practically anyone.  "startxfce4" does the dbus-launch itself.
    Original post here:
    Changed in my /etc/slim.conf:
    default_path        /bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin
    Same issue, in Action buttons Shutdown and Restart grayed out.
    in .xinitrc, launch line:
    exec ck-launch-session startxfce4
    Launch line was:
    exec ck-launch-session dbus-launch --exit-with-session startxfce4
    But, same issue with that launch line.  Was googling and I found results saying dbus-launch is contained within startxfce4.
    Last edited by headkase (2012-05-09 02:23:48)

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Toggle Full Keyboard Access is Not Working after Shutdown/Reboot

    Hi,
    I'm yet another keyboard maniac and somehow as above subject was keep re-occured every time after enabled it, I've turn it on full keyboard access in system preferences > Keyboard > Keyboard Shortcuts. All seemed to be good before I shutdown or reboot my macbook pro. I could access all the dialogs and windows. After a reboot or shutdown, all the dialogs from any other apps can still be accessed via keyboard except one single window, the shutdown window (both from hitting apple->shutdown and control+eject.) I have to toggle control+f1 or control+f7 every freaking time in order to enabled keyboard access to shutdown/reboot. I've tried "defaults read -g AppleKeyboardUIMode" in terminal and it returned 3 which is "Full Keyboard Access ON and All controls" even after a fresh reboot:-
    +++++++++
    Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
    3
    +++++++++
    But when I'm using sudoer to check the result was set to "0" means disable:-
    +++++++++
    Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
    Password:
    0
    +++++++++
    So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
    +++++++++
    Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
    +++++++++
    Once done do reboot your Mac & check the result in Terminal should shows as below:-
    +++++++++
    Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
    3
    =========
    Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
    3
    +++++++++
    So it's fixed for my issue. If anyone have better suggestion or the proper method please share.
    Thanks in advance.

    Quakershaker,
    So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
    +++++++++
    Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
    +++++++++
    Once done do reboot your Mac & check the result in Terminal should shows as below:-
    +++++++++
    Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
    3
    =========
    Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
    3
    +++++++++
    So it's fixed for my issue. You may try this let me know the outcome.
    Thanks

  • MSI 970A-G45 reboot issues

    Just did an upgrade to my PC.
    Running the following:
    MSI 970A-G45
    Athlon Phenom X4 955 at Stock speeds(used from previous rig)
    Corsair Vengeance 8GB PC12800 DDR3 1600MHz at Stock speeds(new)
    XFX Radeon HD 6870 1GB GDDR5(new)
    OCZ 120GB SOLID 3 SERIES SATA III 2.5 Hard Drive
    Sony DVDRW 24x(used from previous rig)
    BFG 550W PSU(used from previous rig)
    Windows 7 64bit Ultimate
    Here's the issue. Sometimes when I restart the PC, it never comes back up. It goes down like normal, then I have no video signal and it just sits there. It's doesn't happen all the time though, which is perplexing. When it does not come back up, I can simply hit the reset button and then it starts to boot up. Apparently it has all the latest BIOS and drivers according to MSI Live update. So at this point I have no idea what to try in order to get this thing to restart normally every time. I guess I shouldn't be too concerned considering I don't reboot a lot...?...?
    P.S. I am not overclocking anything. Processor and RAM are running at stock speeds.
    P.S.S. I do have two USB hard drives hooked up. Could one or both of them be causing the random reboot issue?
    P.S.S.S. Although I mentioned the USB drives, I never had this reboot issue prior to upgrading to this motherboard, video card and ram.
    THANKS!

    Hello,
    Having the same issue with similar hardware.  PC will boot cold and shutdown like it should but restarting most of the time causes the system to hang with no video but the fans run and MB LED's are still lit.  Pressing the reset causes the video to restore and POST and a normal boot.  I tried an old video card to eliminate a video card problem but it does the same thing.  Here is the hardware I'm running, I just built it today.
    MSI 970A-G45
    AMD Phenom II x4 955 BE (not OC)
    MSI AMD Radeon 6770 1GB DDR5 (Not OC)
    Kingston  HyperX Blue 4GB DDR3 PN:KHX1333C9D3B1/4G
    LiteON 24x DVDRW (SATA)
    WD Caviar Blue 6.0GB/S 250GB HDD
    Cooler Master Extreme Power plus 500W PSU
    I would post CPU-Z stats but I cant figure out how to attach images. help?
    Areamike,
    To adjust the command rate you have to go into the overclock tab and go into advanced DRAM config.  If I can remember right you may have to adjust another setting away from AUTO to be able to access this menu.  (i would be able to tell you for sure but I cant look at BIOS and be on the forum typing at the same time.lol)  After having this problem I read a lot of reviews with people having trouble with this board, hopefully its just a setup problem for us.
    -RickyB

  • [SOLVED]Poweroff, shutdown, reboot, ctrl+fx make desktop reboot

    Hi,
    I experiencing some strange issue with my new computer.
    This is some part:
    Gigabyte GeForce GTX 770 (Graphics card)
    Gigabyte GA-H81-D3 ATX (Motherboard)
    Intel Core i5 I5-4460 (proc)
    My screen is connect to HDMI with the gtx
    My laptop work really fine without any issue with bumblebee and other stuff.
    But on the desktop, if I press
    Ctrl+f1 or f2 or f whatever, my screen stop(no input signal) and the desktop reboot and my screen never come back the LCD say no input signal
    Same think if I do a terminal, shutdown, reboot or poweroff.
    When the desktop reboot I listen the bip for motherboard but the LCD always say no input, and my usb keyboard and mouse don't respond (press Num. Lock de nothing).
    I have only one choice is to press the reset button from my case.
    I don't know what append.
    this is a fresh dmesg:
    http://pastebin.com/vmsK9nzz
    this is after a forced reboot, look the same:
    http://pastebin.com/ZKCQeykK
    I try to blacklist uvesafb and vesafb in modprob but the NVRM message stay.
    I boot with uefi.
    there is Xorg.0.log: http://pastebin.com/wkMfHcg4
    the Xorg.0.log.old: http://pastebin.com/gSu2GCTR
    And my journaltl from fresh to a reboot:
    http://pastebin.com/UpPpLL0h
    What do the mess in this desktop?
    I try to find some clue but nothing for now.
    Thanks
    Last edited by Badrocklo (2014-08-08 10:02:22)

    The title has a max char limit, that's why it's appearing to be read only. You'll have to shorten your title to squeeze in the [solved] part. Sometimes I really wish the arch bbs had some more features like labels or polls.
    edit: I see you figured it out
    Last edited by Soukyuu (2014-08-08 10:06:57)

  • [systemd] No shutdown/reboot/suspend anymore from XBMC

    Migrated my HTPC to systemd last night. So far so good, lirc still works, I found some Fedora xbmc service script that launches XBMC neatly. It looks good.
    XBMC runs as my own user. However, whereas before I could suspend/shutdown/reboot just fine (through upower), that now does not work anymore. I have enabled (and started) the upower service:
    $ systemctl list-units|grep -i upower
    cpupower.service loaded active exited Apply cpupower configuration
    upower.service loaded active running Daemon for power management
    However, even with the upower service enabled all XBMC shows in the shutdown menu is a timer option and hibernate/suspend. The two last options definitely don't work. I have hit that button enough to know. Before, there were also restart/shutdown options visible. Those are gone. So all that's left is pushing the button on my HTPC to make it shut down.
    XBMC service file:
    [Unit]
    Description = Starts instance of XBMC using xinit
    After = syslog.target
    [Service]
    User = $user
    Group = users
    Type = simple
    ExecStart = /usr/bin/xinit /usr/bin/xbmc-standalone -- :0
    [Install]
    WantedBy = multi-user.target
    Any pointers?
    Edit: NFS problem solved by enabling rpc-idmapd.service.
    Last edited by .:B:. (2012-08-27 15:10:43)

    Thanks Elfo, I'll have a look at those. Further inspection showed that the polkit service was actually failing. I just bumped the release from 105 and 107, built from ABS and installed 107. Turns out polkit needs its own user now (polkitd) and needs access to the root:root owned rules dirs as well. Fixed that one, but not getting any further.
    Edit: there's a user-session-units package in the AUR (with deps) so I built and installed those. It works (XBMC autolaunches), and it seems like it's communicating with D-Bus, but no luck there (no suspend, no shutdown etc. and shutdown/reboot buttons are still gone):
    23:12:09 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.ConsoleKit on /org/freedesktop/ConsoleKit/Manager with interface org.freedesktop.ConsoleKit.Manager and method CanStop
    23:12:09 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.UPower on /org/freedesktop/UPower with interface org.freedesktop.UPower and method EnumerateDevices
    23:12:10 T:140643986409344 INFO: Selected UPower and ConsoleKit as PowerSyscall
    23:12:10 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.ConsoleKit on /org/freedesktop/ConsoleKit/Manager with interface org.freedesktop.ConsoleKit.Manager and method CanStop
    23:12:10 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.ConsoleKit on /org/freedesktop/ConsoleKit/Manager with interface org.freedesktop.ConsoleKit.Manager and method CanRestart
    23:12:10 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.UPower on /org/freedesktop/UPower with interface org.freedesktop.DBus.Properties and method Get
    23:12:10 T:140643986409344 DEBUG: Previous line repeats 1 times.
    23:12:10 T:140643986409344 DEBUG: DBus: Creating message to org.freedesktop.UPower on /org/freedesktop/UPower with interface org.freedesktop.UPower and method EnumerateDevices
    Edit: now it's not even starting anymore at boot, apparently it's waiting for some stuff to finish and bails out. God what an ordeal this is.
    Last edited by .:B:. (2012-08-28 21:44:41)

  • I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • WindowsXP (HVM, PV Driver) can't shutdown/reboot by Oracle VM Manager 3.0.3

    I install a virtual machine (Windows XP SP3) as HVM/PV withOracle VM Windows Paravirtual (PV) Drivers 3.0.1.
    Oracle VM Manager 3.0.2 can shutdown / reboot the virtual machine with PV driver, but Oracle VM Manager 3.0.3 can not do that.
    Also when I install the Oracle VM Windows Paravirtual (PV) Drivers 3.0.1 to Windows XP SP3, the virtual machine has two NICs.
    One is "Realtek RTL8139 Family PCI Fast Ethernet NIC", and the other one is "ORacle VM Virtual Ethernet Adapter".
    Both NIC are connecting the VM Network.
    I think when the PV drivers installed to the virtual machine, the original NIC should be disapper.
    Does anybody has same problem?

    Yes. I tried two ways as below;
    1) I made the virtual machine as "HVM" mode, then I install Windows XP SP3,.
    After installed OS I installed the PV drivers, then I shutdown the virtual machine and I switched the mode to "HVM with PV Drivers", and booted it.
    2) I made the virtual machine as "HVM with PV Drivers" mode, then I install Windows XP SP3.
    After installed OS I installed the PV drivers, and rebooted it.
    Both of them I can't shutdown the virtual machine from Oracle VM manager.
    I can see these Oracle VM devices in device manager, "Oracle VM Virtual Disk Controller", "Oracle VM Virtual PCI Bus", "Oracle VM Virtual SCSI Disk Device","Oracle VM Virtual Ethernet Adapter".
    And "Oracle VM Service" is installed as Windows service and running.
    The "Oracle VM Virtual Ethernet Adapter" can connect my VM networks without problem.
    I think Oracle VM 3.0.2 does not have this kind of problems.
    My oracle VM 3.0.3 are not upgraded from 3.0.2. It is fresh.
    Edited by: Hiroyuki Harada on 2012/01/16 20:44
    Edited by: Hiroyuki Harada on 2012/01/16 20:44

  • Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

    Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
    Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
    I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

    Anyone able to help please?
    Thanks.

  • [Solved] Display on shutdowns/reboots

    I'm currently running a SLiM and Openbox configured x86_64.  I was wondering if there was a way to change the shutdown/reboot from just flashing to the tty login and do the arch bootup with all the modules like such:
    MODULE [BUSY]
    like the normal shutdown from a terminal shutdown.
    Any possible way?
    Last edited by MythicLlama (2009-04-15 00:47:24)

    What init would be the one to modify?
    And it just seems funny when I reboot that I end up just staring at a terminal login instead of seeing progress (just seems random to me) .  I've honestly just noticed it recently from me playing with settings and rebooting often.

  • Tray application to shutdown/reboot

    Hello all,
    I looked around and couldn't find anything so I thought I would ask you all. I am looking for an application that drops an icon in the systray that will let me right click and logout, shutdown, reboot, etc. I use i3 and don't want to move away from i3bar but would still like a graphical option for those commands.
    Thanks!

    From the Arch wikli, https://wiki.archlinux.org/index.php/i3 … ock_screen
    You can use this in your i3 config file ...
    # Add a small delay to prevent suspend races
    # https://bugs.launchpad.net/ubuntu/+source/unity-2d/+bug/830348
    set $Locker i3lock && sleep 1
    set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
    mode "$mode_system" {
    bindsym l exec --no-startup-id $Locker, mode "default"
    bindsym e exec --no-startup-id i3-msg exit, mode "default"
    bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default"
    bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default"
    bindsym r exec --no-startup-id systemctl reboot, mode "default"
    bindsym Shift+s exec --no-startup-id systemctl poweroff, mode "default"
    # back to normal: Enter or Escape
    bindsym Return mode "default"
    bindsym Escape mode "default"
    bindsym $mod+Pause mode "$mode_system"
    This brings up a list choice in the statusbar. Its not an icon, but a key press/combo is, imo,  more in-keeping with the i3 way of doing things.
    Last edited by chris.m (2015-02-10 15:19:07)

  • How to restart KDE without reboot of system

    Hello
    I tried to do this in 2 ways:
    1)
    - su
    - /etc/rc.d/kdm stop
    - /etc/rc.d/kdm start
    2)
    - setxkbmap -option terminate:ctrl_alt_bksp      # to use keyboard (ctrl+atl+Backspace)
    But here is the problems.
    Method 1) -> there is no sound when I try to play movies (wth VLC player for example).
    Method 2) -> does't work. It tells me "No protocol specified"
    Last edited by clovenhoof (2010-09-17 07:04:55)

    Log out of KDE log in to vc. Then either stop kdm as you specified above, or given that it gives your problems, use
    sudo htop
    to kill it. It's not "pretty" but it is effective.
    Then start KDM with xinit. Edit xinit that instead of TWM it starts KDM.
    Why do you even need to restart KDE without reboot?

  • Rc.shutdown hangs on shutdown/reboot

    Hi,
    I installed Arch two weeks ago. Unfortunately it hangs at shutdown/reboot. It stopps succesfully the network-daemon and stops at this point. Keyboard and Mouse are responding but I'm unable to log in via a different console.
    The daemon that should be stopped after network is syslog-ng.
    My daemons:
    DAEMONS=(syslog-ng !hotplug !pcmcia network nscd portmap fam nfslock netfs ypbind autofs crond gdm)
    I was able to reboot the system succesfully by disabling syslog-ng in the rc.conf and commenting out following lines of the rc.shutdown:
    #!/bin/bash
    # /etc/rc.shutdown
    . /etc/rc.conf
    . /etc/rc.d/functions
    # avoid staircase effect
    /bin/stty onlcr
    echo " "
    printhl "Initiating Shutdown..."
    echo " "
    if [ -x /etc/rc.local.shutdown ]; then
    /etc/rc.local.shutdown
    fi
    if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
    # Shutdown daemons
    let i=${#DAEMONS[@]}
    while [[ i -ge 0 ]]; do
    if [[ `echo ${DAEMONS[$i]} | grep '^[^!]' | wc -l` -eq 1 ]]; then
    /etc/rc.d/${DAEMONS[$i]#@} stop
    fi
    let i=i-1
    done
    # find any leftover daemons and shut them down
    # these lines cause my system to stop the shutdown
    #if [ -d /var/run/daemons ]; then
    # for daemon in `ls /var/run/daemons`; do
    # /etc/rc.d/$daemon stop
    # done
    #fi
    fi
    # Terminate all processes
    stat_busy "Sending SIGTERM To Processes"
    /sbin/killall5 -15 &> /dev/null
    /bin/sleep 5
    stat_done
    I have absolutely no idea why my system is acting this way.
    [UPDATE]
    I tried using syslogd instead of syslog-ng but there's still the same problem. Why does my system dislike a system-logger this much?

    *bump*
    I have an almost identical problem to this one.  Which would be the most pertinent system, and log files one would need to help me trouble shoot this?
    Mike

Maybe you are looking for

  • How to deal with custom object in OM for Nakisa security

    Hi All, We are implementing OrgChart 3.0 SP1 for live environment. We have custom object in OM. Structural Authorization is based on that custom object. (The custom object is displayed as custom field in IT0001 (Org Assignment). Also we are using Org

  • What is the difference between apple warranty and applecare and applecare plus

    I understand that apple warranty covers damage due to manufacture defects and applecare is the extended warranty and insurance. Then what is applecare+? What is the difference between applecare and applecare+?

  • 11G BPEL Process using DB Adapter Polling Wont Create Instance

    I have a BPEL project that uses DB Adapter to Poll the database for changes. This process was developed in 10.1.3.3 and migrated to 11.1.1.2. I have successfully deployed this to the weblogic server, but it will not run. It is showing that is is up a

  • What font works best for Hindi titles in Premiere Pro CC 2014?

    I'm attempting to subtitle a video in Hindi. I've installed a few fonts but nothing is working 100%. When I copy/paste from a translated script (PDF) random characters do not show up in the title tool (they appear as spaces). I'm wondering if Adobe r

  • Dynamic MOH for call

    We are using ucce 8.0.2, cvp 8.0.1 and cucm 8.0.3. Client is asking different MOH for multiskilled agents say for example; An agent is a member of skill group A,B,C and D. Now if the agent recieve a call for his/her B skill group and put the caller o