KE80 Report Revenue FY 2014 not Fetching

Hi Report Painter Expert,
We have KE80 report where we have made as per client Requirement Report, Like Revenues i.e Sales ,Material Cost, development cost, Conversion Cost and all component have respective GL Cost Element, but when after year ending FY 2013, when i copy from march'14 to April'14 Column, all component coming for the Month of April'14 Period 01, but Sales Revenue not coming on KE80 report.
Kindly help me , why nt data flow for Revenue for the Month of April'14, we have already sold good the customer ... as well. but Revenue Component Value not Display fetching.
Thanks
Pranav Kr. Gupta
SAP FICO Consultant

Hi SAP Vyas,
I did get u , where is Global parameter OBY6. or somewhere, wht should i do , tell the T.Code for the same to resolve this issues.
Thanks
pranav

Similar Messages

Values r not fetch in internal table

Hi Frds
In my report the values are not fetching in the internal table ICOSP
This is my program ,kindly correct my mistake.
DATA : WBS LIKE VBAK-PS_PSP_PNR.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS PROJECT FOR WBS.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
DATA: BEGIN OF IVBAK OCCURS 0,
      VBTYP LIKE VBAK-VBTYP, "SD document category
      AUART LIKE VBAK-AUART, "Sales Document Type
      NETWR LIKE VBAP-NETWR, "NET VALUE OF THE ORDER ITEM
      WAERK LIKE VBAK-WAERK, "SD document currency
      PS_PSP_PNR LIKE VBAP-PS_PSP_PNR, "WBS Element
      END OF IVBAK.
DATA: BEGIN OF IPRPS OCCURS 0,
      PSPNR LIKE PRPS-PSPNR, "WBS Element
      POSID LIKE PRPS-POSID, "WBS Element
      OBJNR LIKE PRPS-OBJNR, "Object number
      PSPHI LIKE PRPS-PSPHI, "Current project number
      END OF IPRPS.
DATA: BEGIN OF ICOSP OCCURS 0,
      OBJNR LIKE COSP-OBJNR,
      GJAHR LIKE COSP-GJAHR,
      WRTTP LIKE COSP-WRTTP,
      BEKNZ LIKE COSP-BEKNZ,
      WTG001 LIKE COSP-WTG001,
      WTG002 LIKE COSP-WTG002,
      WTG003 LIKE COSP-WTG003,
      WTG004 LIKE COSP-WTG004,
      WTG005 LIKE COSP-WTG005,
      WTG006 LIKE COSP-WTG006,
      WTG007 LIKE COSP-WTG007,
      WTG008 LIKE COSP-WTG008,
      WTG009 LIKE COSP-WTG009,
      WTG010 LIKE COSP-WTG010,
      WTG011 LIKE COSP-WTG011,
      WTG012 LIKE COSP-WTG012,
      WTG013 LIKE COSP-WTG013,
      WTG014 LIKE COSP-WTG014,
      WTG015 LIKE COSP-WTG015,
      WTG016 LIKE COSP-WTG016,
     SUM TYPE CURRENCY ,
      END OF ICOSP.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF ITAB OCCURS 0,
      PSPNR LIKE VBAK-PS_PSP_PNR,
      NETWR LIKE VBAP-NETWR,
      END OF ITAB.
PERFORM IVBAK.
PERFORM IPRPS.
PERFORM ICOSP.
PERFORM MOVE_COSP.
PERFORM MOVE.
PERFORM FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM ALVDISPLAY.
FORM IVBAK.
SELECT VBTYP AUART NETWR WAERK PS_PSP_PNR FROM VBAK INTO TABLE IVBAK
       WHERE PS_PSP_PNR IN PROJECT AND
             VBTYP = 'G' AND AUART = 'ZPCQ'.
CLEAR: IVBAK.
ENDFORM.                    "IVBAK
FORM IPRPS.
SELECT PSPNR POSID OBJNR PSPHI FROM PRPS INTO TABLE
         IPRPS WHERE PRPS~PSPHI IN PROJECT.
CLEAR : IPRPS.
ENDFORM.                    "IVBAP
FORM ICOSP.
LOOP AT IPRPS.
SELECT OBJNR GJAHR WRTTP BEKNZ WTG001 WTG002 WTG003 WTG004 WTG005
    WTG006 WTG007 WTG008 WTG009 WTG010 WTG011
    WTG012 WTG013 WTG014 WTG015 WTG016
    FROM COSP INTO CORRESPONDING FIELDS OF TABLE ICOSP
      WHERE OBJNR = IPRPS-OBJNR AND WRTTP = '4'.
ENDLOOP.
CLEAR:ICOSP.
ENDFORM.
Thanks
Pari

hi,
try this Code
DATA : wbs LIKE vbak-ps_psp_pnr.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS project FOR wbs.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
TYPES: BEGIN OF ivbak,
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document Type
netwr LIKE vbap-netwr, "NET VALUE OF THE ORDER ITEM
waerk LIKE vbak-waerk, "SD document currency
ps_psp_pnr LIKE vbap-ps_psp_pnr, "WBS Element
END OF ivbak.
TYPES: BEGIN OF iprps,
pspnr LIKE prps-pspnr, "WBS Element
posid LIKE prps-posid, "WBS Element
objnr LIKE prps-objnr, "Object number
psphi LIKE prps-psphi, "Current project number
END OF iprps.
TYPES: BEGIN OF icosp,
objnr LIKE cosp-objnr,
gjahr LIKE cosp-gjahr,
wrttp LIKE cosp-wrttp,
beknz LIKE cosp-beknz,
wtg001 LIKE cosp-wtg001,
wtg002 LIKE cosp-wtg002,
wtg003 LIKE cosp-wtg003,
wtg004 LIKE cosp-wtg004,
wtg005 LIKE cosp-wtg005,
wtg006 LIKE cosp-wtg006,
wtg007 LIKE cosp-wtg007,
wtg008 LIKE cosp-wtg008,
wtg009 LIKE cosp-wtg009,
wtg010 LIKE cosp-wtg010,
wtg011 LIKE cosp-wtg011,
wtg012 LIKE cosp-wtg012,
wtg013 LIKE cosp-wtg013,
wtg014 LIKE cosp-wtg014,
wtg015 LIKE cosp-wtg015,
wtg016 LIKE cosp-wtg016,
sum TYPE currency ,
END OF icosp.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF itab,
pspnr LIKE vbak-ps_psp_pnr,
netwr LIKE vbap-netwr,
END OF itab.
DATA : i_ivbak TYPE STANDARD TABLE OF ivbak,
       i_prps TYPE STANDARD TABLE OF iprps,
       i_icosp TYPE STANDARD TABLE OF icosp,
       wa_ivbak TYPE ivbak,
       wa_prps TYPE prps,
       wa_icosp TYPE icosp.
PERFORM ivbak.
PERFORM iprps.
PERFORM icosp.
*PERFORM MOVE_COSP.
*PERFORM MOVE.
*PERFORM FIELDCATALOG.
*PERFORM BUILD_LAYOUT.
*PERFORM ALVDISPLAY.
FORM ivbak.
SELECT vbtyp auart netwr waerk ps_psp_pnr FROM vbak
INTO TABLE i_ivbak
WHERE ps_psp_pnr IN project AND
vbtyp = 'G' AND auart = 'ZPCQ'.
ENDFORM. "IVBAK
*&      Form IPRPS
*       text
FORM iprps.
SELECT pspnr posid objnr psphi
FROM prps INTO TABLE
i_prps WHERE prps~psphi IN project.
ENDFORM. "IVBAP
*&      Form ICOSP
*       text
FORM icosp.
IF i_prps[] IS NOT INITIAL.
    SELECT objnr gjahr wrttp beknz wtg001 wtg002 wtg003 wtg004 wtg005
    wtg006 wtg007 wtg008 wtg009 wtg010 wtg011
    wtg012 wtg013 wtg014 wtg015 wtg016
    FROM cosp INTO CORRESPONDING FIELDS OF TABLE i_icosp
    FOR ALL ENTRIES IN i_prps
    WHERE objnr = i_prps-objnr AND wrttp = '4'.
ENDIF.
ENDFORM.                    "ICOSP
Regards
Sandipan

Crystal Report not fetching data

Hi Everyone,
I have a crystal report which is not fetching any data but when I run the same sql in the database the data comes.Can anyone please help me in finding what exactly the problem is.
Regards,
Neeraj

Sorry we can't help you, not enough info.
See Rules Of Engagement.
What have YOU done to debug the problem?
Version of CR and any patches?
Database connecting to and any patches?
Version of Database Server and Client?
How are you connecting, ODBC, OLE DB or Native?
What error are you getting?
Don

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

F.01 & KE80 Report not match Value

Hi Expert,
We have made KE80 report as well F.01 FSV but while check both T.Code F.01 is giving Correct Information but Ke80 report giving Less amount then F.01. note : I have copied from KE5B as advice by Ravi Sankar Veena posted date 4th of June 2009.
but value is still same, wht should i do in this case. in F.01 m unable to access Dril Down Report. kindly help me.
Regards
Pranav

Hi Pranav
Blessed are those who have FI / EC-PCA reconciled
Even SAP has accepted in one of it notes that PCA is not intended to reconcile with FI.. Reasons are many and this thread would fall short for it..
For P&L accounts - It would reconcile because PC is derived from CO objects like CC.. So, where your GL is a cost element, you can relax
For B/S accounts - Its a night mare. Especially, when you do F.5D, there is no guarantee that the Splitted amount would match the original amount
Because of these reasons, New GL PCA was introduced
Br. Ajay M

KE80 Report Forumulas showing Wrong

Hi Report Painter Experts,
I have one issues regarding KE80 report, when i Run KE80 report Total Amount not matched..second issues please see the below
I have one more same report issues regarding, Report Painter KE80, Values two times showing for two Element , while should be shown on one Element,
I have made MIS report, under MIS Report
            Particular
Revenue                      100000 All Revenue GL Including Profit Center
Material Cost                50000 All Relevent M.Cost GL Including Cost Center
1    Manpower 2000 All Relevent GL A/c including Cost Center
2    Energy                            3000 All Relevent GL A/c Including Cost Center
3    Consumables                  1000 All Relevent GL A/c including Cost Center
C   Conversion Cost (1+2+3) 6000
D   Development Cost : under Development we have to capture only EN10 Cost Center 500
E   Sustaining Cost : Under sustaining Cost, FI10 Cost Center should ve display 300
F. Profit (A-B-C-D-E)        : 43,200/-
Depreciation                   : 300    All Relevent GL including FI10 Cost Center
Note : Whenever we do business transaction speciaclly Sustaning Cost and Depreciation updated of Rs. 300/- both Particulars in Sustaning as well Depreciation , we want only in Depreciation coz of FI10 Cost related with FI10, that’s why effected. How to control for sustaing cost not be updated of Rs.300/- in Sustaning Cost.
G. Depreciation              300 A;; Relevent Cost Element GL Including Cost Center
H. Finance Cost             100 All Relevent Cost Element GL including Cost Center
I. Other Income & Loss   150 All Relevent Cost Element GL including Profit Center
J . PBT Profit Before Tax (F-G-H-I)
Kindly Help me, Sustaing Cost not comes Value Rs. 300/- only Depreciation .
Kind regards
Pranav Kr. Gupta
SAP FICO Consultant.

Hi Sujit,
     Thanks for your reply. As you said, if it's because of exception aggregation, the same(wrong total)will be displayed for all the sales offices right?
Could you please let me know what are all the important tabs you want me to show?
Awaiting for your reply..
with thanks and regards,
Antony Jerald.

'profit center report Revenue side'

Dear friends,
While doing AP invoice ,i am selecting Profit center.
OR
for JE of AP invoice if i select profit center.
So its amount is comming in 'profit center report Revenue side'
is it right?not understood its logic.?
Regds
mahesh.

Hi,
https://websmp201.sap-ag.de/~sapidb/011000358700000760832007E/CW34_FIN_Profit_Centers.pdf
Thanks,
Mansoor

The report server service is not running on Reporting Service Point server

Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?

I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!

JDBC Sender Adapter - NOT FETCHING RECORDS...

Hello Experts,
I know this was answered in a separate thread (JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED).
However, my question is, Is there a way that we can be notified if a channel has stopped fetching records?
or is there a reporting tool that can be used to check/monitor if a channel is not processing any messages?
Thanks & Kregards,
allar

Hi Sreedhar,
Thanks for your reply.
These case is not being captured by our alert configuration because its not throwing any error.
in the communication channel monitoring, we see only something like this..:
3/16/09 8:25:19 PM Processing started
3/16/09 8:34:20 PM Processing started
3/16/09 8:33:55 PM Processing started
3/16/09 8:32:54 PM Processing started
but no error is being displayed nor sent.
Also, there was a case that the channel just stopped fetching, even though everything is active.
example log:
3/12/09 8:32:54 PM Processing started
We're looking for ways on how we can trap these scenarios as early as possible, get us notified and perform adapter-lock release when needed.
Regards,
allar

How to restrict authorization based on profit center in ke80 report

hi friends
we have a situation where we need to maintain the authorization based on profit center in ke80 report. The authorzation object K_PCA is not working. whenever we assign a particular profit center and then generate the profile, we still get the message no autjorization and when we check su53 it shows it needs '' asterisk. but we cant assign the asterisk as we have 5 subsidaries and there are using 5 different set of profit centers so assigning asterisk () would be comprimising on our security.
does anybody came across this situation and if yes how did they resolve this?
I need your suggestions on how to maintain this restriction.
Regards,
Imran

Hi Friends
The problem has beend solved. It turns out that this is a report writer issue. We raised the issue with SAP and they informed that 'For Report Painter/Writer every item is checked if you have the authori-zation or not. Only the items with authorization fullfilled will be displayed afterwards'.
Based on SAP answer we created different reports for each profit center/company code.
I would like to thank you all for your time and inputs.
Regards,

Assigning the KE80 report to Z transaction code

Hi friends
My functional consultant has created a report in KE80 transaction code using report painter. But due to some reason we cant give the authorization for KE80 to the user. So my functional consultant told me to create a Z tcode for a perticular report. I have assigned the program name to a Z tcode. But the selection-screen is coming differently in z tcode compare to ke80. In z tcode it is showing some extra fields in selection-screen. Apart from that after running the report the output is not coming in list format it is always starting printing. But in KE80 we can see the output in list format.
Please give some idea to solve this issue.

Have u copied the transaction code to a Z code or created altogther a new one?
Coz if u have created a new one, then it might be possible that the type of transaction created is different on from the needed.
Its better you copy the transaction into a Z transaction and actiavte.
Try this as this mite be the issue.
Hope it helps.
Regards,
Mansi.

TF255186: The following SQL Server Reporting Services Instance could not be found

Hi,
I'm trying to install TFS 2013 on a remote SQL RS instance.
Using the TFS 2103 U4 installation
SQL 2012 RS, name instance, Server: SQLProdA, Instance Name COMRS
When I enabled tracing using debugView I see the following output:
[4160] [Error @11:07:10.978] Exception Message: TF255186: The following SQL Server Reporting Services Instance could not be found: COMRS. The server name is: SQLProdA. (type TfsAdminException)
Any ideas what the issue is?
Thanks,
reuvy

Hi Charles,
Thanks for the help. I already saw those links, and am already trying with the format. As I wrote above:
Server: SQLProdA, Instance Name COMRS
So I wrote in the box "SQLProdA\COMRS" (without quotes of course) and I still keep getting that error.
I don't know if it matters, but although this is indeed a named instance, nonetheless, the path to the report server uses the default url (ie.
http://servername/reports) as opposed to the name instance version (ie.
http://servername_instance/reports) as mentioned by your link and this post:
https://msdn.microsoft.com/en-us/library/bb552341.aspx
But, I checked with Fiddler on the server and didn't see it trying to even access the link so I don't think it is related. I saw with Process Monitor that it is indeed trying to access via the network resources on SQLProdA, so I know it's trying.
I have noticed something in the past, and wondered if this could be the issue, that for example if I have Management Studio 2014 installed, I cannot connect to a Reporting Services instance which is 2012. Only when Management Studio 2012 is installed
and being used can I connect. I wondered if this possibly could be related, that maybe the API or something else which the installer is using is missing some component to connect to the RS instance.
Just in case, I already installed both the SQL 2012 and 2014 Client Tools Connectivity (although I first installed 2014, and then 2012).
Do you think this could be the issue? If not, do you possibly have any other leads?
Thanks,
Reuvy

Report error service is not available

Hello,
I find the following error on several locations in my SIPstack logs on my Edge Server:
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
What service is this referring to?
How can we troubleshoot this error message further?
Any additional information about this topic would be appreciated!
/mk
The full INFO message:
L_INFO(TF_PROTOCOL) [0]0A40.1148::03/10/2014-17:14:03.968.000000ad (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 2161867164
Instance-Id: 000000F0
Direction: incoming;source="internal edge";destination="external edge"
Peer: standard.kressmark.com:5061
Message-Type: response
Start-Line: SIP/2.0 503 Service unavailable
From: "Mattias Kressmark"<sip:[email protected]>;tag=45e334cc8d;epid=8ff7cc2b20
To: <sip:[email protected]>;tag=FD66AF22DAE1582D6D94354611261F35
CSeq: 1 SERVICE
Call-ID: 9316261cef2141d3815a94c386e180d6
Via: SIP/2.0/TLS 17.21.122.15:49348;branch=z9hG4bKB54C0D77.B76658C4DF13234B;branched=FALSE;ms-received-port=49348;ms-received-cid=4600
Via: SIP/2.0/TLS 192.168.1.10:51983;received=81.217.34.250;ms-received-port=51983;ms-received-cid=100
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record

Hi,
Did you deploy Monitoring server in your Lync server environment?
Please update to the latest version for Lync server 2010 and then test the issue again.
http://technet.microsoft.com/en-us/lync/dn146015
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Illustrator CS6, CC, "CC 2014" not honoring a 100% Cyan Spot Color Swatch change.

Why does Illustrator CS6, CC, "CC 2014" not honor a "100% Cyan Spot Color Swatch" changing the % value in the Color Pallet.
I create 3 different Spot Color Swatches of 100% Cyan, 100% Magenta and 100% Yellow in the Swatch pallet.
Then I fill 3 different squares with one of each Swatch and put the Fill to 70% on all in the Color Pallet.
Now I try to change each square back to 100% value in the Color Pallet by typing a number into the Percent Field.
But the Cyan Spot Color does not honor the entry, the Yellow and Magenta are fine.
Has anyone seen this behavior before, and what can be done to resolve it?
Thanks,
J

I would report this as a bug, you can use the slider to set it to 100%, but not enter that value by typing. Strange.
Adobe - Feature Request/Bug Report Form

VB Runtime error timeouts. Could not fetch terms from table: TPW6

VB Runtime error timeouts are occurring repeatedly for multiple users on the terminal server.
Event Type:         Warning
Event Source:     VBRuntime
Event Category: None
Event ID:              1
Description: The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 13508 ,Logged: Could not fetch terms from table: TPW6
It looks like bad table reference in XL reports? This is causing significant lag as they wait to time-out. Is there a way to identify source(s) and correct it/them? Unfortunately the error does not say what report. Is there any way of identifying exactly what the SAP equivalent is to the tables it is having issues finding?
thanks

This error may not cause big problems. We have to live with it for a long time. It only show XLR with highlight icon on the task bar. It shouldn't have much bigger impacts.
Thanks,
Gordon

KE80 Report Revenue FY 2014 not Fetching

Similar Messages

Maybe you are looking for