Keep packages up to date

Hi!
I'd like to know who to keep certain packages up to date.
I have mirrored the whole current dir with rsync but i just need a few packages from extra.
Now i run rsync for extra with --delete and --existing which deletes the packages if they are old, then i have to download them manually with a ftp client again. Can't rsync do that?
cheers

im using cygwin rsync on my laptop, but not at home since i dont have such a good internet connection for that
i use this packages for installing and updating arch on different pc's, so i hardly need to download anything at home
.. i just want to automate this process

Similar Messages

Kick off SSIS master package once new data gets into a transactional table

hello
I have a SSIS master package.. I also have an UI which the user uses to configure up some date ranges (that I need to use to load the data from the package). After date configuration, when user clicks on RUN SSIS button in UI, that configured data gets loaded
up in a transactional db table. Once new data is entered into that table, i need to kick off this master SSIS package.
Question is , is there any other method besides using table triggers?
Please advice.
Thanks

Another method is to have a automated job created in SQL Agent which keeps on polling the transactional table. you can configure it to run periodically (may be every 30 mins etc). Each time it starts it needs to check the status of a table which captures
details of whether user has pressed RUN SSIS button (you need to include that logic in UI to set a bit in a status table when button is pressed). If status is set, it will check if transactional table has data (IF EXISTS(SELECT 1 FROM Table)). Once these two
are truw it will go to next step where it calls master package. At the end it needs to log somewhere that data transfer is completed and also need to reset the bit field as well.
So job will have three steps
Step1: check bit is set and table has data
ie
IF (SELECT bitField FROM StatusTable)=1 AND EXISTS(SELECT 1 FROM TTable)
SELECT 1
ELSE
RAISERROR 'Table not ready',16,1
and set job advanced option as
quit job reporting success for failure condition and go to next step for success condition
Step2: Execute master package
Step3: rest status bit and update daya transfer status in a log table with date of run,record count etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created?

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created? I tried exporting them, but it loses all info. Also, how do I move the quicktime movies from one iphoto library to another? They were exported as jpgs

Add both libraries to iPhoto Library Manager. Then select the events or albums that you want to copy from library A and drag them to library B in iPLM.
This video shows the process:
OT

Calling a package procedure with Date parameter only

Hi All,
Please help me to call a package procedure with Date parameter from sql prompt.
Arif

Check the below procedure.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure procdate (p_date_in date)
2 is
3 p_date_out date;
4 begin
5 p_date_out := add_months(p_date_in,6);
6 dbms_output.put_line(p_date_out);
7* end;
SQL> /
Procedure created.
SQL> exec procdate('01-JAN-2010');
01-JUL-10
PL/SQL procedure successfully completed.
SQL> exec procdate(to_date('01/01/2010','DD-MM-YYYY'));
01-JUL-10
PL/SQL procedure successfully completed.
SQL> exec procdate('31-DEC-2010');
30-JUN-11
PL/SQL procedure successfully completed.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

Error when running package to load data from InfoProvider

I encounter the following error when using the standard package to load data from a InfoProvider to BPC. I tried loading the data from both DSO and InfoCube, but I get the same error.
The log message where the error occurs is as follows:
Task name CLEAR CUBE DATA:
Could not perform write (INHERITED ERROR)
The "convert" step of the process chain completed successfully. This error is happening when the "clear cube according data" step of the process chain gets executed.
Any ideas on why this is happening?
Thanks.

Hi Laeral:
You should be able to just open one VISA session then write and read both commands then close the session at the end. This sounds to me like an error that comes from trying to open two VISA sessions to the instrument at the same time. I have attached some very basic LabVIEW VISA code that writes and reads two different commands. Hopefully it will get you started.
Regards,
Emilie S.
Applications Engineer
National Instruments
Attachments:
Basic VISA Example Two Commands.vi ‏39 KB

Maximum package size for data packages was exceeded and Process terminated

Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.

Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK

"Maximum package size for data packages was exceded".

Hi,
We are getting the below error.
"Maximum package size for data packages was exceded".
In our scenario we are loading the data product key wise (which is a semantic key as well) to the DSO thro’ a start routine.
The logic in the start routine is such a way that it calculates the unique product counts , product key wise. Hence we are trying to
group the product key thro’ semantic groups.
Ex: In this example the product counts should be A = 1,B=2 ,C = 1
Product Key
Products
A
1000100
B
2000100
C
3000100
B
2000300
C
3000100
For some product keys the data is so huge that we could not load the data & we are getting the error.
Please suggest any alternate way to handle this thro’ code or introducing any other flow.
Regards,
Barla

HI
we can solve the issue by opening the system setting of data packer size
like below we have create 2 programs, 1 for open the system settings,2 for
close the settings .
1 start program
data: z_roidocprms like table of
roidocprms.
data: wa like line of z_roidocprms.
wa-slogsys = 'system_client' . wa-maxsize = '50000'. wa-statfrqu = '10'.
wa-maxprocs = '6'. wa-maxlines = '50000'.
insert wa into table z_roidocprms.
Modify roidocprms from table z_roidocprms .
2 close program
data: z_roidocprms like table of roidocprms.
data: wa like line of z_roidocprms.
wa-slogsys = 'syetm_client' . wa-maxsize = '50000'. wa-statfrqu = '10'.
wa-maxprocs = '6'. wa-maxlines = '50000'.
insert wa into table z_roidocprms.
modify roidocprms from table z_roidocprms .
data load infopakage settings we have to maintain like
below
we have create the process chain like as below
1 start progarm
data load infopakage
2 close program.
This might fix the problem.
Regards,
Polu.

Maximum package size for data packages was exceeded?

Hi Experts,
I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
Thanks,
Krishna

You can refer to the below OSS note:
Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
And other related notes: 352038, 417307
Hope this helps.
Murali

How do I set File Sharing in iTunes to keep files up-to-date?

How do I set File Sharing in iTunes to keep files up-to-date? i tried iTunes File Sharing, but the updates to the files never transferred across the USB during sync. Tried to use Documents to Go, but the Apple behavior keeps them from syncing via USB, so when I am home and have no wifi/internet there is no way to transfer the files. The other apps I have looked at also use wifi/internet to get around the problematic Apple behavior, so there is no way to connect via USB that I have found other than the iTunes. Have not been able to locate any helpful information to configure the File Sharing to hotsync the files between pod and computer.

I am trying to USB sync Word, Excel, and PDF files between the ipod and the PC.
Pretty sure icloud has to have the internet to work, but I can try to see what USB options there are there when time permits.
Pretty sure dropbox has to have the internet to work, but I can try to see what USB options there are there when time permits.

BPC10 - Data manager package for dimension data export and import

Dear BPC Expers,
Need your help.
I am trying to set up a data manager package for first time to export dimension - master data from one application and import in another application ( both have same properties) .
I created a test data manager package from Organize > add package > with process chain /CPMB/EXPORT_MD_TO_FILE and Add
In the advance tab of each task there are some script logic already populated. please find attached the details of the script logic written under each of the tasks like MD_Source, concvert and target .
I have not done any chnages in the script inside the task .
But when i run the package , I have selected a dimension 'Entity' but in second prompt ,it ask for a transformation file , and syatem autometically add the file ... \ROOT\WEBFOLDERS\COLPAL\FINANCE\DATAMANAGER\TRANSFORMATIONFILES\Import.xls
I have not changed anything there
in the next prmpt , it ask for a output file ..and it won't allow me enter the file name .....i
Not sure how to proceed further.
I shall be greatfull if someone guide me from your experiance how to set up a simple the data manager package for master data export from dimension . Should I update the transformation file in the script for import file and output file in the advance tab. how and what transformation file to be created and link to the data manager package for export / import .
What are the steps to be executed to run the package for exporting master data from dimension and import it another application .
Thanks in advance for your guidance.
Thanks and Regards,
Ramanuj
=====================================================================================================
Detals of the task
Task : APPL_MD-SOURCE
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : EXPORT_MD_CONVERT
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : FILE_TARGET
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
================================================================================

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

What is the best way to do a 10.8 reinstall and keep all of my data?

What is the best way to do a 10.8 reinstall and keep all of my data?

Boot to the recovery disk and reinstall the os. That said you do have a back up just in case (I trust)?

Determining File Name in Info Package under External Data

Determining File Name in Info Package under External Data
I am on SAP BW 3.0. A System is sending a flat file every few days
With a date time stamp, e.g., d:\loaddar\file_20080212_122300.csv
I know in Info Package one can create routine under external data to determine the file name. I have seen
Examples where people determine file name based on date. Since my file has a time stamp, what code I write a to pick the file. Is there a way to read one or more files and
Determine file name.
I am new to SAP BW and ABAP. However, I have lot of experience with Oracle and Java.
Can someone point me how this will be done. I am looking for some sample code as well.
Thanks in advance. I will really appreciate your help.

Hello Prem,
Even i used to get the file suffix with date & time, and i found very difficult to pick up the file from application server using routine in infopackge. Then i asked to change to date only and it was easy to pick the file using routine. But i think in your case files are coming more than once, in such a case you should write a small unix script to add these files and then convert into single file with date only and execute the infopackage to load it.
Cheers!
Sanjiv

Data Package 1 ( 0 Data Records ) at DTP with Status RED

Hi All,
For 0 records at DTP level it is showing Overall status & Technical status as RED and yellow beside Data Package 1 ( 0 Data Records ). There is no short dump no error message. At PSA level in status tab the message displayed is Status 8 which says no data on R3 side for this particular load. Help me out.
Regards,
Krishna.

Hi,
if traffic light is not highlighted, you are probably running a delta.
You will have to set the traffic light in the according init.
(and run init again )
the setting in the delta will be the same.
Udo

Keeping stats up to date for partitioned tables

Hi,
Oracle version 10.2.0.4
I have a partioned table. I would like to keep stats up-to-date.
Can I just run a single command to update table stats, indexes and partitions please?
exec dbms_stats.gather_table_stats(user, 'TABLE', cascade=>true)or I also need to run exec dbms_stats.gather_table_stats(user, 'TABLE', granularity=>partition)
thanks,
Ashok
Edited by: 902986 on 27-Oct-2012 11:06
Edited by: 902986 on 27-Oct-2012 11:07

thanks
yes there were many indexes on the original non-partitioned table and I have created another table partitioned and now populating it with the data from the original table. the new table is partitioned on a date range column for all years before 2012, then for 2012, 2013 and so forth.
the indexes are all created locally bar a unique index (as per original table), created globally to enforce uniqueness across the table itself. the search will always look to year to date say 1st jan 2012 tilll today for risk analysis. the partition is on that date column and there is also a local index on that date column as well, to avoid table scan (tested with disabling that index, predictably did table scan and was less efficient).
in a DW environment, I don't see much value in having global index bar for primary key/unique constraint. I do realise that if the query crosses more than one partition, say 2 partitions, there will be two b-tree local index scans rather than one, but that would be rare (from the way they query the table).
therefore my plan is to perform a full table stats with cascade=>true and measure the time it takes and plan to do the same if the maintenance window allows it.
thanks again for your help
Edited by: 902986 on 28-Oct-2012 13:24

Keep packages up to date

Similar Messages

Maybe you are looking for