Kenwood PA18-3A Power Suppy Driver/ Programming Manual required

Hi, I would like to do remote programming using GPIB for the Kenwood PA18-3A Power supply.
Does anyone have a base driver / programming manual for this Instrument ?
Manufacturer - Texio Corporation [Japan, formerly known as Kenwood]
Kenwood Model # PA18-3A
Output Voltage: 0 to 18V
Output: 0 to 3A
Voltage Regulation: 3mV
Ripple Peak: 0.5mV RMS
Current Regulation: 10mA
Ripple/Noise: 1mA RMS
104 x 147 x 224 (WHD) 5.6 kg
Any help will be greatly appreciated.
Thanks,
Nikita
Solved!
Go to Solution.

Dear yytseng,
Thankyou for sharing the link.
I noticed that this document is relevant to the PA-B series. I am using an instrument from the PA-A series (PA18-3A). Please let me know if you have any information on whether this command set would support instruments ine PA-A series.
Thanks,
Nikita

Similar Messages

How to Call Total Amount field from t.code - PC00_M40_ANN in driver program

Hi,
There is a standard Transaction for Payroll Annual display - PC00_M40_ANN. From this transaction we can see the Pension Amount month wise and in Totals as well as.
In my report, we want to call Total Amount (from T.Code PC00_M40_ANN).
For Ref., I have design a Smartform with its driver program. In driver program i required this Value...
Plz guide..

Hi,
    Please check the below code ....
    Declare variables , structures .....
call function 'CU_READ_RGDIR'
    exporting
      persnr          = pernr-pernr <--- pass the pernr
    importing
      molga           = w_molga
    tables
      in_rgdir        = itrgdir
    exceptions
      no_record_found = 1
      others          = 2.
if not w_molga is initial.
    call function 'CD_READ_LAST'
      exporting
        begin_date      = pn-begda
        end_date        = pn-endda
      importing
        out_seqnr       = w_seqnr
      tables
        rgdir           = itrgdir
      exceptions
        no_record_found = 1
        others          = 2.
endif.
if itrgdir is initial.
    continue.
else.
    select single relid from t500l into w_relid where molga = w_molga.
    call function 'PYXX_READ_PAYROLL_RESULT'
      exporting
        clusterid                    = w_relid
        employeenumber               = pernr-pernr
        sequencenumber               = w_seqnr
        read_only_international      = 'X'
      changing
        payroll_result               = itresult
      exceptions
        illegal_isocode_or_clusterid = 1
        error_generating_import      = 2
        import_mismatch_error        = 3
        subpool_dir_full             = 4
        no_read_authority            = 5
        no_record_found              = 6
        versions_do_not_match        = 7
        error_reading_archive        = 8
        error_reading_relid          = 9
        others                       = 10.
get all the earnings and deductions
    loop at itresult-inter-rt into wa_rt.
      case wa_rt-lgart.
        to get the net pay
        when '/560'.
          wa_pernr-npay = wa_rt-betrg.
          v_npay = wa_rt-betrg.
       endcase.
endloop.

Calling a driver program by submit in user exit for PGI

Hi Gurus,
I have a question regarding post goods issue (PGI) for transaction vl01n,vl02n and vl06g.
earlier i have created a smartofrm and a driver program for sending the form output attachment in a mail after delivery posting manually.
for this i have created a smartform and driver program in which all the logic to attach and mail send is written on delivery posting.
but now customer want this fucntionality on Post goods issue (PGI), when user go to trasaction vl01n ,vl02n and vlo6g and pressing PGI button,
then mail should be sent automatically with for output attachment.
i have found a user exit which is being triggerd on PGI press MV50AFZ1 in which implemented the implecit enhancement in perform
user_exit_save_document_prepeare with below code.
ENHANCEMENT 1 ZPGI_MAIL_SEND. "active version
DATA c_zlf TYPE likp-lfart.
IF sy-ucomm = 'WABU_T' and xlikp-lfart = c_zlf.
SUBMIT ZSD_DECLARATION_CONFORMITY AND RETURN.
ENDIF.
ENDENHANCEMENT.
After going to transaction vl02n i am putting unposted delivery number and clicking on PGI button.
in debugging its going to condition check for ucomm for PGI buttion and delivery type.
if condtion is fullfiled and curser going further on submit statement, but without executing the driver program ZSD_DECLARATION_CONFORMITY it coming out of enhancement.
its not performing the task which is develped in the driver program.
Please help me with the submit statement structure if i am missing any or other solution for my problem.
Br,
Surya

Hi Team,
I have used the perform.
ENHANCEMENT 1 ZPGI_MAIL_SEND. "active version
DATA c_zlf TYPE likp-lfart.
IF sy-ucomm = 'WABU_T' and xlikp-lfart = c_zlf.
Perform entry( ZSD_DECLARATION_CONFORMITY )using return screen.
ENDIF.
ENDENHANCEMENT.
Now i am able to communicate with my program.
Thanks,
surya

Power Management Driver wont install in Windows 7

Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500. Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, as does the blue ThinkVantage button. Installed drivers via System Update, however every time I get the message "Package did not install - ThinkPad Power Management Driver for SL Series". Power Manager is installed and running but the driver is not listed under Program & Features. I'm guessing the lack of this driver is the problem. Anyone else seen this or have a fix ? Thanks.

Please visit: http://support.lenovo.com/us/en/downloads/ds014985 but don't download the most current version (3.89.0100) at the top. If you look at the readme, you'll see that the SL500 is not included in the supported systems list.
Instead, scroll downwards to the version table and have a look at the readme for v3.88.0000. You'll see your machine in the supported list, so you could give that one a try, if you want.
Regards.

Update Retriever - Error Downloading Power Management Driver

There is an error in Update Retriever, when I try to download the Lenovo Power Management Driver 1.67.00.02 (giku06ww).
The error message is:
1 update failed to be downloaded.
For me it looks like the XML file does not contain a valid CRC information for the file.

Found a workaround: (I am not sure, why the CRCs are incorrect. It is possible, that the current driver is compromised!)
download manually the files for the power management driver:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww_2_.xml
There is an error in the XML file, the CRC sum and file size is not correct. calculate the SHA1 CRCs for the files and change the sizes:
      <File>
        <Name>giku06ww.exe</Name>
        <CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
        <Size>1278493</Size>
      </File>
    </Installer>
    <Readme default="EN">
      <File id="EN">
        <Name>giku06ww.txt</Name>
        <CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
        <Size>32128</Size>
      </File>
the file should look like this:
<?xml version="1.0" encoding="utf-8"?>
<?pcdDescriptor version="0230"?>
<Package name="IBMPM_W8" id="giku06ww" version="1.67.00.02" hide="False">
<Title default="EN">
    <Desc id="EN">Lenovo Power Management Driver - XP [32]/Vista/7/8 [32,64]</Desc>
</Title>
<DetectVersion type="Registry">
    <Registry>
      <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
      <ValueName>DisplayVersion</ValueName>
    </Registry>
</DetectVersion>
<Summary default="EN" />
<Severity type="3" />
<SeverityOverride type="2">
    <Not>
      <_RegistryKey>
        <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
      </_RegistryKey>
    </Not>
</SeverityOverride>
<Vendor>Lenovo</Vendor>
<ExtractCommand>giku06ww.exe /VERYSILENT /DIR=%PACKAGEPATH% /EXTRACT="YES"</ExtractCommand>
<ReleaseDate>2013-06-19</ReleaseDate>
<DiskSpaceNeeded>30000000</DiskSpaceNeeded>
<Reboot type="3" />
<Install rc="0" type="cmd" default="EN">
    <Cmdline id="EN">%PACKAGEPATH%\Setup.exe -S -SMS</Cmdline>
</Install>
<ManualInstall type="cmd" default="EN">
    <Cmdline id="EN">%PACKAGEPATH%\Setup.exe</Cmdline>
</ManualInstall>
<Uninstall />
<DetectInstall>
    <_RegistryKeyValue type="REG_SZ">
      <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
      <KeyName>DisplayVersion</KeyName>
      <Version>1.67.00.02^</Version>
    </_RegistryKeyValue>
</DetectInstall>
<Dependencies>
    <And>
      <_OS>
        <OS>VS-BUS.*</OS>
        <OS>VS-ENT.*</OS>
        <OS>VS-HOMEBASIC.*</OS>
        <OS>VS-HOMEPREM.*</OS>
        <OS>VS-HOMEULT.*</OS>
        <OS>WIN7-ENT.*</OS>
        <OS>WIN7-HOMEBASIC.*</OS>
        <OS>WIN7-HOMEPREM.*</OS>
        <OS>WIN7-PRO.*</OS>
        <OS>WIN7-STARTER.*</OS>
        <OS>WIN7-ULT.*</OS>
        <OS>WIN8.*</OS>
        <OS>WIN8-ENT.*</OS>
        <OS>WIN8-PRO.*</OS>
        <OS>WXP-PRO.SP3</OS>
      </_OS>
      <Or>
        <_PnPID><![CDATA[*IBM0055]]></_PnPID>
        <_PnPID><![CDATA[*IBM0068]]></_PnPID>
        <_PnPID><![CDATA[*LEN0068]]></_PnPID>
        <_PnPID><![CDATA[*LEN0168]]></_PnPID>
      </Or>
      <Or>
        <Or>
          <Not>
            <_Bios>
              <Level>GDET*</Level>
            </_Bios>
          </Not>
        </Or>
        <Or>
          <And>
            <_Bios>
              <Level>GDET*</Level>
            </_Bios>
            <Or>
              <_Coreq name="BIOS_GDUJ">
                <Version>1.07.1.07^</Version>
              </_Coreq>
              <Not>
                <_Bios>
                  <Level>GDET0*</Level>
                  <Level>GDET1*</Level>
                  <Level>GDET2*</Level>
                  <Level>GDET30*</Level>
                  <Level>GDET31*</Level>
                  <Level>GDET32*</Level>
                  <Level>GDET33*</Level>
                  <Level>GDET34*</Level>
                  <Level>GDET35*</Level>
                  <Level>GDET36*</Level>
                </_Bios>
              </Not>
            </Or>
          </And>
        </Or>
      </Or>
    </And>
</Dependencies>
<Files>
    <Installer>
      <File>
        <Name>giku06ww.exe</Name>
        <CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
        <Size>1278493</Size>
      </File>
    </Installer>
    <Readme default="EN">
      <File id="EN">
        <Name>giku06ww.txt</Name>
        <CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
        <Size>32128</Size>
      </File>
    </Readme>
</Files>
</Package>
The update can be imported into update retriever manually and it must be assigned to systems (by default no machine types are assigned).

Power Management Driver wont install - SL500, Windows 7

Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500. Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, same with the blue ThinkVantage button. I've installed the drivers via System Update, however each time I get the message "Package did not install - ThinkPad Power Management Driver for SL Series". The version number is 1.44. Power Manager is installed and running but the driver is not listed under Program & Features. I'm guessing the lack of this driver is the problem. Anyone else seen this or have a fix ? Thanks.

Please visit: http://support.lenovo.com/us/en/downloads/ds014985 but don't download the most current version (3.89.0100) at the top. If you look at the readme, you'll see that the SL500 is not included in the supported systems list.
Instead, scroll downwards to the version table and have a look at the readme for v3.88.0000. You'll see your machine in the supported list, so you could give that one a try, if you want.
Regards.

Power Management Driver for Windows 8.1 missing (G510)

Hello,
There is no lenovo power management driver for windows 8.1 listed in the support page. There is only a version for windows 8 available. I need that driver and i need to have it. My laptop is the G510. When will the new version of the software be released? It's a new laptop and it should be fully compatible.
Till then, will installing windows 8 version of the program cause problems?
Thanks

I will . Hope that Lenovo will do as needed. Anyone know a better way to be heard by Lenovo and get an answer for this issue?

How to deal with visession in IVI-C driver program ?

a ViSession is an identifier that corresponds to a session.
My instrument is a remote internet device . i can call VISA library to implement
communication between labwindows and my remote internet device.In this case , what is meaning of Visession
? It looks as if Visession does not have a relation to my IVI-C driver program.
if it has a relation to my driver, how to deal with the ViSession in IVI-C driver program?thank you

ViSession is necessary as part of a larger picture and fills an important role in good architecture. Intrument handles (stored as the ViSession type) are necessary for large projects, which may require commanding multiple instruments.
There is no function to call which can get or set a ViSession value, similar to the way other attributes are set with driver functions. The ViSession intrument handle is created and returned to the application when an instrument is initialized; it represents a connection with one particular instrument.
This allows users to have multiple instruments connected, which can be controlled programmatically with one application. Then, the application can quickly specify which instrument it would like to send a command, just by sending one instrument handle or another.
Yes, you could remove the ViSession as parameter in your functions, but it would cripple the big picture effectiveness of the driver. In place of the ViSession, you would have to send each function the Resource Name or Resource ID for the particular instrument as well as the Option String. So really, it is just more practical and better practice to use an instrument handle (stored as the ViSession type).
That being said, for certain functionality (adding two numbers), you absolutely do not need a ViSession instrument handle parameter. You will have to use your best judgement to determine where to include or exclude this parameter. I suggest using the ViSession instrument handle parameter with any function that communicates with an instrument.
Also, Ebalci is correct regarding the difference between ViSessions and channels. ViSessions are used to communicate with different instruments. To reference or read a specific channel from an instrument you will have to refer to the guidance in the manual for the instrument in question. There will likely be a command to select a specific channel when reading from the instrument. And for general guidance, I suggest reviewing another IVI driver, possibly for an instrument of the same class or type or maybe from the same family, if such a driver already exists.
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

AQ6317 Programming manual

Hi...Now I am looking for AQ6317 Optical Spectrum Analyzer programming manual. My work is dealt with this instrument and I would like to write Labview program to communicate with this one via GPIB interface. Anybody has programming manual or has a link to download. Please let me know. Thank you very much :-)

Ando is now sold by Yokogawa. You should be able to order a manual from them. There is also a Ando 6310 driver that might help you get started.

Dunning report driver program

Hi,
I see a dunning sap script z_asia_dunning assigned in Dunning procedure. I am interested in knowing the driver program for this dunning script.
I searched in SDN and failed to get this information. Please let me know how to get a driver program for dunning report.
Thanks in advance
Sudhaker

ok it IS possible
and well the table where those connections of driver programs and form are stored is (i hope you learned that by now from the earlier posts) TNAPR.
you are a developer, so it´s not really neccesary for you to have a transaction to chance some record in a database table.
I would propose the TA SE16N with the fcode &sap_edit.
then just fill in your new (copied) driver program and save

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

Printing Line Items in Script without using driver program

How to print the line items of a internal table in sap script without using driver program? I am not supposed to edit anything in the driver program. Pls help me to solve this problem...

Hi,
You can try by creating a new driver program and a new FORM ENDFORM inside that for this purpose.
Regards,
Gaurav

Driver Program Name for Shipment output form

Hi guru's
can anyone tell me wats the name of the driver program and the form name for a shipment output form?(for ABAP development purpose)
Thanks in advance,
Regards/Aryan

Hi Aryan - What Shipment output are you referring to? LD01-Delivery Note? There are some more, which are associated with Transportation application as well.
LD01 - V2 - Program SDADDN02. Form SD_DELNOTE_SUPPL
LD00 - V2 - Program YMRVADDN01/RVADDN01 Form ZMLWMRVDELNOTE(customized our side)/RVDELNOTE
Pl00 - Packing List -V2 - Program SDPACKLI, Form SD_PACKING_LIST
CMR1 - Bill of lading - V7 - Progarm RVADTR01 Form SD_SHIPMENT_CMR.
Best way, use transaction V/34 to view all V2 - Shipping output types and the associated program and form. V/82 to view all V7-Transportation output types and the associated program/forms.
Thanks
Nikhil

Driver program name

hi all
is there any other way of determining the driver program name for a script/smart form apart from the table tnapr?
regards
niki

Hi..
1) goto NACE transaction.
2) select the module of the form...i.e. PO/SD/etc
3) select the output type option
4) from the list ,select the name of ur form/script.
5) check out the processing routine,that will give the driver program name
Reward Pts if helpful.
regards
- Rishika Bawa

Driver program for BIll of lading smartform

Hi all,
Can you please provide me the standard driver program for bill of lading smartform.
or for purchase order smartform.
Thanks and regards,
Rajeev

Hi,
For Purchase Order - SAPFM06P.
And for future info,
If you Know the Application and Output Type - Then it is very easy to know the Smartform or the Script Used.
1.Go to NACE and Check.
For Ex: PO belong to APP type EF, So click on EF and then click on "Output Type " button.
Then all the output types will be displayed.Then select the required and Click on "Processing Functions". Then you can see the Configuration details done for this ouput type like which smartform, which subroutine.
2.Also, You can check the TNAPR table entries by entring the below information
Output Type, Message transmission medium, Application.
Thanks & Regards,
Vamsi.

Kenwood PA18-3A Power Suppy Driver/ Programming Manual required

Similar Messages

Maybe you are looking for