Planning Security Filters not reflecting in Essbase filters for 2 of 4 cube

We are using Hyperion Planning with essbase. In essbase we have 4 cubes in essbase (BSCF, EMP, IS, MGN). We would like to add security for the entity dimension as we don't use it currently but we do for other dimensions.
I have created a new group (FIN_APAC) in SS so that restricted access be given to users in Asia for only their LE(s). Then I enabled security for the LE dimension in planning and set security filters through a command line load. For existing groups I gave write access to all LE members and for the new group (FIN_APAC) I gave write access to certain members.
When I refresh the security filters in planning they should reflect in Essbase and it does for 2 cubes (BSCF & EMP) but for the other cubes (IS & MGN) the essbase security filters are NONE! In planning all the LE members are set to be included in all plan types.
The main problem seems to be with this new group (CSR_FIN_APAC) as whenever this group is assigned the essbase filters are not assigned properly. For the existing groups that have added LE security for all members the security filters are updated for 4 cubes as expected.
Any help appreciated
x

When you create a planning application we can create 3 essbase cubes as plan types. if you use Capex, Workforce you can able to create max of 5 databases in Essbase version 11.1.1.3.
if it is 11.1.2 you can add one more cube
In your question, have you created 4 Essbase cubes. can you explain how that is possible.
if all the LE members in all plan types means in 3 Essbase cubes. when you refresh security from planning to essbase that works fine.
Can you explain the situation perfectly so that can able to give ans.
Thanks,
Suneel kanthala.

Similar Messages

Planning application is not reflecting in essbase

Hi,
I have created an application in EPMA and it was deployed successfully,but later i need some changes to the application i.e,changing dimesions from sparse to dense as dense restructuring taking much time so that i deleted that application from essbase and did whatever changes that i need.
In EPMA it was validated and deployed successfully but when i'm looking in essbase the application is not there in essbase.
am i doing wrong,if so please let me know how to get my application back.

Yes,did the same even then the outline is not created in essbase.
if it is not created the outline why i'm getting successful deployment message.
It is really confusing,
please gurus let me know how to get back my application back by selecting create outline option in epma.
Tell me what are the steps to follow to delete the application in EPMA tables(if i select delete application in EPMA),
so that i can once again create it as a fresh application.
thanks in advance

Shared Services Security information not updating in Essbase

Hi,
I have created few users in Shared Services and performed the sync operation. Created users are not reflecting in Essbase server. why?
Also tried by externalizing the users... performed sync from shared services and refreshed the shared security from EAS console...then also... user information not updating in Essbase?
What could be the reason?

Have you provided Essbase application access rights to those users in shared services?
If not, then try after providing Essbase access to users. This might be the reason for your issue.
Regards,
NitinGupta

Not reflecting the sales offices for top down manual planning hierarchy

Hi Experts,
Please help me on this issue.
I hava an Hierarchy like from District to Offices
for eg: for district-                'ZBHDEL' I have salesoffice like 100, 101, 102, 103,105.
like wise for other district          'zbhyd' i have salesoffices like 200, 201, 202.
I have created the Mannual layout with Hierachy datamodel with BPS characteristics, TOP-DOWN, AND enabled check entry.
In the additional setting i have select All Possible combinations.
District at Headerlevl, along with Product and Division
and selected salesoffice at Leadcoloumn.
My Planning levell and package contains : for sales office slected Hierarchy at planning level.
BRAND
Base Unit
Company code
Country
Currency
Division
Fiscal year/period
Fiscal Year Variant
PRODUCT
SIZE
Sales District
Sales Office
Segment
Version
*The Prolem is when i input some plan for a district ZBHDEL from the other layout, WHEN I RUN THE sALES OFFICE hIERARCHY
Mannual Layout its not reflecting the sales office where i have to plan for the salesoffices by seeing the values
of planned District.
where as for one district i can able to see the sales offices. even i have maintained the masterdata at Infoobject level.
Can anybody please help me out.
thanks
Deenu
Edited by: deenu prasad on Aug 4, 2010 7:07 AM

Create hierarchy for sales district info-object in following way.
Sales District         Text Node                          Level 1
Sales Distirct         Characteristics Node         Level 2
                              value 1 = ZBHDEL
                              value 2 = ZBHYD
sales Office          Characteristics Node         Level 3
                              values will be according to district (include diff sales offices for diff districts in level 2)
restrict district to this hierarchy in planning level and plan according by both approaches (create 2 seperate layouts):
Top down - to plan at main node i.e. sales district
bottom up - to plan at sub node i.e. sales office

F4 help not reflecting in ALV Grid for fixed values specified in domain

Hi experts,
   As per subject i have a field for which i have assigned 5 fixed values in the domain level (of that field) . The problem is when i am displaying my ALV grid output i need a F4 help and F4 Option for the same is not reflecting and i have assigned in the field catlog as shown bellow.
wa_fcat-fieldname = 'ZDEPLOY'.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-f4availabl = 'X'.
wa_fcat-key     = 'X'.
WA_FCAT-SELTEXT_L = 'Deployment Planned'.
wa_fcat-outputlen = '25'.
   WA_FCAT-EDIT = 'X'.
   WA_FCAT-REF_FIELDNAME = 'ZDEPLOY'.
   WA_FCAT-REF_TABNAME = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
for the above field the f4 help is not reflecting.
Intrestingly i have another field which i have declared using the same procedure for which my F4 help (with fixed values ) is reflecting in the same program .with the values as shown below
    wa_fcat-fieldname = 'ZFINAL'.
wa_fcat-tabname = 'IT_FINAL'.
WA_FCAT-SELTEXT_L = 'Final Status'.
wa_fcat-outputlen = '10'.
   WA_FCAT-EDIT = 'X'.
   wa_fcat-ref_fieldname = 'ZFINAL'.
   wa_fcat-ref_tabname = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
can u plz suggest me with a solution .
Regards,
Edited by: abhilash aswath on Oct 20, 2010 3:32 PM
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Oct 20, 2010 3:58 PM

hi,
There was a mismatch of characteristics. I resolved by matching the same.

Changes are not reflecting using af:resource for adding CSS

Hi,
I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
Any help will be appreciated
Thanks,
San.

Hi,
if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
Frank

Changes are not reflecting on same system for WD Component

Hi ,
I have one interesting issue , I have done some changes in Webdynpro component , changes are reflecting for some users but not reflecting for some other users on the same system. Can anyone tell me why it is behaving like that ?
In R/3 I have faced this issue , this is one option of GENERATE via this I have resolved this issue but how i will do it here?
Thanks
Ankesh Jindal

I am not sure if i understand your real problem here.
It could be very well related to Personalization and Customization.
Go to SICF transaction and then
sap/bc/webdynpro/sap/wd_analyze_config_user

Planned Delivery time not considered after MRP run for scheduling

Dear All,
After running MRP, the planned delivery time maintained in Purchase info record is not taken into consideration for calculating start date of the schedule line of externally procured material generated by the system.
Planned delivery time is 3 days & Requirement of parent material falls on 15/02/2010. With this, system should calculate the start date for schedule line as on 12/02/2010 considering 3 days Planned Delivery time.
Any idea as to what might have gone wrong?
thx for your help in advance.
Rgds,
Ranjeet

Hi,
Determination of PLD from the Purchase info record is maintained in transaction code:OMDT. Planned Delivery time is also maintained in Scheduling agreement. However, it is not calculating delivery date as well as release date.
Rgds,
Ranjeet

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

When NOT to use Essbase

I am compiling a list of when NOT to use Essbase. For example, when real time data is required. Care to add others? Thanks.

Please note we use Essbase for HEAVEY forecasting, budgeting, and very complex calc scripts. It handles all numerics great! It also lets many 'users' input their forecast and calc, if setup correctly. It will do calcs that relational databases balk at, just because of how the outline can be used.Filters provide ways to lock out users.It is just like any other 'database', it needs a true SERVER for good performance with proper setup. Most people I deal with that have performance issues need proper training and need to understand how to setup an Essbase application, just like any relational database. Essbase is definately NOT a datawarehouse or OLTP system.

Planning area data not matching with backup cube / PSA

Hi friends,
while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
Pls its urgent.
Pts for sure.
Vishal.
9326179903

make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
if you got to /SAPAPO/SDP_EXTR then you can see this button
you can set this up as a program scheduled to run before the updation of your cube
As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
Are you extracting at a detailed level or at the aggregated level
Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

Changes in server side java file not reflecting in Client side java code?

Hi friends,
iam using eclipse IDE, JBoss server, SWING GUI and Oracle DB
( looks like : SWINGGUI (Client) <--> EJB's (serverside) <---oracle )
my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?

my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).what do you mean it's not "identifying" the methods?
you have to call those methods you know
are you getting NoSuchMethodError?
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?you haven't posted any code or error messages that might help us debug

Vendor listed in the batch does not reflect actual supplier.

Hi,
Vendor listed in the batch does not reflect actual supplier.
For some (STO's) it reflects the actual supplier & for some it is replaced by receving vendor.
Regards,
Sudakar

Great, that worked, thanks.
Now I have a small problem. I'm dispatching a MOVE event
manually at one point to force a listener to trigger, and it seems
that afterBounds is null. Here's how I'm dispatching the event:
nativeWindow.dispatchEvent(new
NativeWindowBoundsEvent('move'));
While the MOVE listener function is successfully called,
event.afterBounds.x throws a null reference exception.
Is there an easy workaround?

Commit not reflected in multiple instances

Hi,
I have 2 instance myapp1 and myapp2 for the db myapp. The version is 10g. When I run a procedure to insert multiple records and commit in one instance, it is not reflected in other instance for atleast 2-3 minutes. I believe it should happen instantly.
Can anyone throw light on this?
Regds,
noneda

Are you on 10gR1 or 10gR2?
On 10gR1, max_commit_propagation_delay(as sybrandb said) parameter can affect the delay of commit propagation. You need to check this parameter or browse metalink for bugs.
On 10gR2, this parameter is deprecated and commit is propagated without delay. So you seem to on 10gR1. If not, you need to check metalink for similar phenomenons.

Final delivery indicator not reflected in BW ODS

Hi Experts,
I have situation like, final delivery indicator not reflected in BW ODS for purchase order. In R/3 it is X, in BW showing space. There is direct mapping from datasource field to ODS for this field.Loading also seems to be ok.
Cna you please give some points where this information is missing.
Thanks
Konda Reddy

Hi konda,
See the business senerio it is not fetching the data u have to write a formula in transformation based on requirement.
Regards,
Lakshmi

Planning Security Filters not reflecting in Essbase filters for 2 of 4 cube

Similar Messages

Maybe you are looking for