Kernel panic (solved) -- VIA chip M/Board
I am using a custom kernel but once in awhile I tried getting the official kernel (2.6.18.x) to work with mkinitcpio but no success. I tried all hints posted in forum related to "kernel panic". The error was always same:
EIP:[<c024b42d>] acpi_hw_level_read +0x7/0Na SS:ESP 0068:c14a1f58
<0> Kernel panic - not syncing : Attempted to kill init!
When having the same error with Kubuntu's live CD (2.6.17-10) I concluded the problem is in M/Board. Earlier in the forum (read below) was mentioned Linux doesn't support properly VIA based chipset. I changed to Intel 815E. Now the booting works fine with deafult mkinitcpio setting. Also sound is working, which didn't do with VIA chipset in Arch (but in Kubuntu).
iphitus wrote:
You made the terrible mistake of getting a Via based chipset. When buying my computer, Con Kolivas advised that I stay away from them like the plague as under linux, and in general, you get a lot of unusual problems like what you have mentioned.
Ended up with an intel chipset which runs perrrrfectly.
let's see :
Via KT266A on Asus mobo with athlon XP 1800 approx a year
VIA KT444 (i think) on AOpen Mobo with athlon xp 2600 - 5 months
VIA KT800 on Asus S939 Mobo with Athlon 64 - 3 months
All 3 systems are running archlinux (lastest version) without any problems
Note : all 3 systems use the via82cxxx module
Similar Messages
-
Kernel panic.. with new logic board
Hi,
So I recently replaced my logic board after trying EVERYTHING to fix a somewhat frequently occuring kernel panic. Now however.. it has happened again.
Does anyone have any idea what could be causing this? I honestly feel like I've tried everything. Could it be bad RAM? I've changed the hard drive, done a fresh OS X install (perhaps its something in my settings from migrating my old stuff back over?), new logic board.. reset PRAM, every suggestion I could find.
Here is the old discussion before I changed the logic board. https://discussions.apple.com/thread/3902490
Attached the latest crash log.
Interval Since Last Panic Report: 389295 sec
Panics Since Last Report: 2
Anonymous UUID: F57DA50B-3111-4118-A66E-A003634B4A5D
Sat Aug 4 20:34:26 2012
panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff80002aaae2, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000000645e000, CR3: 0x000000002fb3d000, CR4: 0x0000000000000660
RAX: 0xffff80000668f000, RBX: 0xffffff801014ce80, RCX: 0xfffeffffffffffff, RDX: 0xffffff801014ce98
RSP: 0xffffff80e7e43200, RBP: 0xffffff80e7e43280, RSI: 0x0000000000000000, RDI: 0x00000000001a13f4
R8: 0x0000000000000000, R9: 0xffffff800cd25000, R10: 0x00000000001b2fff, R11: 0x0000000000000000
R12: 0x8000000000000000, R13: 0x0000000000000000, R14: 0xffffff801014ce80, R15: 0x000000000668f000
RFL: 0x0000000000010246, RIP: 0xffffff80002aaae2, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000645e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80e7e42eb0 : 0xffffff8000220792
0xffffff80e7e42f30 : 0xffffff80002c473a
0xffffff80e7e430e0 : 0xffffff80002da0cd
0xffffff80e7e43100 : 0xffffff80002aaae2
0xffffff80e7e43280 : 0xffffff80002adbd4
0xffffff80e7e432a0 : 0xffffff800026740e
0xffffff80e7e432d0 : 0xffffff800026804b
0xffffff80e7e436d0 : 0xffffff8000268448
0xffffff80e7e43730 : 0xffffff8000571351
0xffffff80e7e43780 : 0xffffff80002ff905
0xffffff80e7e437d0 : 0xffffff80002ff59e
0xffffff80e7e43810 : 0xffffff8000301996
0xffffff80e7e438a0 : 0xffffff80004ddf0c
0xffffff80e7e43990 : 0xffffff80004fe325
0xffffff80e7e43ae0 : 0xffffff80005010d5
0xffffff80e7e43b40 : 0xffffff800031ccbd
0xffffff80e7e43bb0 : 0xffffff800030b9c8
0xffffff80e7e43da0 : 0xffffff800030bdad
0xffffff80e7e43f60 : 0xffffff80005ccfe8
0xffffff80e7e43fb0 : 0xffffff80002da5e9
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 21950465015381
last loaded kext at 21384906305176: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f81322000, size 57344)
loaded kexts:
com.bresink.driver.BRESINKx86Monitoring 9.0
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.AppleUSBCDC 4.1.17
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.0f3
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.GeForce 7.1.8
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBTCKeyEventDriver 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleUSBHub 4.5.0
com.apple.nvenet 2.0.17
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: SAMSUNG HM501II, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
Any help at all or new fixes I could try would be greatly appreciated! Very frustrating!Cheers - I've run Rember a few times and it hasn't come up with any errors, but I've heard it's not a 100% accurate test. Looks like that's the only thing left it could be!
-
Kernel Panic; Bad Memory; Recalled Logic Board
About a year ago I had the logic board on my iMac replaced under a recall and everything went fine. Until last week. My wife goes downstairs and tries to use the computer and all the fans were running at full speed. I rebooted it and got a kernel panic. Rebooted again, and got another kernel panic. So I opened it up and moved the memory around, thinking that a stick might have gone bad or something. It seemed like it might work, at first, but then it got another kernel panic. I purchased entirely new memory and it still got a kernel panic on boot.
Currently, it is completely unusable as it kernel panics early in the boot cycle. I can get it to boot the Apple Hardware Test CD and running the test revels that the memory is bad. But it said this with the original memory that had worked for years and the brand new memory. My final thoughts are that the logic board is shot and there is no recall this time. What is the warranty on Apple replacement parts? If its 1 year then I might be able to get it replaced for free; if its 90 days then I'm screwed. I think I'm screwed.
It was running the latest OS X (10.5.6) and had been working fine. There has been no new hardware attached nor software upgraded. It just up and died one day. Does anyone have any advice?
Thanx!
RichardI had my logic board replaced while under warrantee a while back on my 1.8 MHz PPC G5 iMac. Lately every time I try and work in Adobe Photo Shop Elements I get this error>
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000008
So I started looking around on my MAC and noticed that my memory now only reports that I have 1 gig of ram....I had upgraded this MAC with 2 - 1 gig rams from Crucial (Using their System Match thing to make sure I had right ram) It used to show 2 Gig in "About this Mac" Now if the problem might be a bad logic board, I am Not going to spend $600 to fix it. I have not run my test CD and am looking to find out what I need to to to find out what is wrong with my MAC. This drives me crazy. And yes this error is repeatable, on demand! Please help. Also if it is in fact a bad logic board I will be looking to replace this MAC with another. I only use this one for photography and was wondering if I can do that effectively on a Macbook or do I need to consider a MB-Pro?
Thanks.
D.Zack
[email protected] -
10.4.7 and airport kernel panic - solved?
hi.
has 10.4.7 solved the airport kernel panic? i am one of the 'lucky' wk 20 macbook pro owners. i have installed the update and am not in a wireless area so cant comment but am wondering what other people have experienced.
did get a different kernel panic and am starting a separate post.
thxShe had Tiger running fine until this happened last night, so that's not really the issue. It's how to restore everything as after the archive and install, she can't open iPhoto for instance. Will she have to just reinstall Tiger or can she drag the previous systems folder contents to the relevant places and it'll all be back as before? Will the problem she encountered after the update also have a chance of being there again as it was in the previous system that crashed?
-
After pacman -Syu (I already install some things before that)I get a:
Kernel panic -not syncing:VFS:Unable to mount root fs on unnown -block(0,0)
here is the fstab of my working mandriva;the root for arch is hda9
# This file is edited by fstab-sync - see 'man fstab-sync' for details
/dev/hda1 / ext3 defaults 1 1
/dev/hda7 /home ext3 defaults 1 2
/dev/hdc /mnt/cdrom auto umask=0,users,iocharset=iso8859-1,codepage=850,ro 0 0
/dev/hda9 /mnt/lin2 ext3 defaults 1 2
/dev/hda8 /mnt/win ext3 defaults 1 2
none /proc proc defaults 0 0
/dev/hda6 /usr ext3 defaults 1 2
/dev/hda5 swap swap defaults 0 0
this is arch's fstab:
# /etc/fstab: static file system information
# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fl vfat user,noauto 0 0
/dev/hda10 swap swap defaults 0 0
/dev/hda9 / ext3 defaults 0 1
I also want to ask -how to mount my hda7 under arch without any problems?You should have something like this:
title Arch Linux
root (hd0,8)
kernel /boot/vmlinuz26 root=/dev/hda9 ro
initrd /boot/kernel26.img
that's wright I have it just that way:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/hda (hd0)
# /dev/hdb2 (hd1,1)
# /dev/hda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,8)
kernel /boot/vmlinuz26 root=/dev/hda9 ro
initrd /boot/initrd26.img -
Another kernel panic [solved by kernel upgrade]
# /etc/lilo.conf
boot=/dev/hda
# This line often fixes L40 errors on bootup
# disk=/dev/hda bios=0x80
default=ArchCPIO
timeout=50
lba32
prompt
image=/boot/vmlinuz26
label=ArchCPIO
append="root=/dev/hda2 rootfstype=ext3"
read-only
initrd=/boot/kernel26.img
Having a Problem with this (and also with mkinitrd). This is kernel 2.6.17.1.
I dont get it.
Blind
BTW: /boot is /dev/hda1Sorry phrakture, you are right. Not enough information in the first post.
First of all, let me say it is a SMP machine:
dual Athlon MP 1900, 1GB RAM.
The panic appears after LILO booted the ramdisk and he wants to mount the root filesystem as far as I understand it.
As I am at work, I cannot provide you with the whole kernel message. As I remember, kinit complains about not being able to mount/find the root partition (which is why I added the rootfstype flag in the append). This did not really improve the situation (although now it stated that it mounted root) but at the end it says:
kernel panic: kinit::attempt to kill init.
I will provide you with the full message as soon as I am home.
I have the mkinitcpio.conf, because it is the same as on my laptop:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev ide scsi sata usb filesystems"
# This setup assembles an ide raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev ide filesystems raid encrypt"
# This setup loads an LVM volume group on a usb device.
# HOOKS="base udev usb filesystems lvm"
HOOKS="base udev ide filesystems"
So nothing special. I am using the same kernel and a very similar setup on my laptop (/boot is on the first partition) - except they are reiserfs: No problem with it there.
Do I have to install any extra software to use mkinitcpio/kinit/etc. that is not resolved in the dependencies? I am running the same Arch system on my Laptop since one year, so maybe I have some stuff on here, that is not on the other machine, which I only installed recently (and is only using current/extra).
Thank you for your help,
Blind -
What's wrong? Kernel panic when I try to reinstall my iMac G4
Hello everyone. This is my last ditch effort to salvage something from my iMac G4 before I bin it.
To cut a long story short, the iMac was misbehaving, so I wiped its hard drive using target disk mode, and now, when I try to reinstall it using the original system disk, it immediately goes to a kernel panic and tells me to restart. The hardware test tells me that everything's OK. So... what next?
I've tried reinstalling using target disk mode, but it didn't work (nothing happened, I'm assuming because my new machine is an Intel while the iMac is a Power PC...)
Any helpful suggestions would be gratefully received.Given the age of the unit, there is a possibility that the internal
hard disk drive may have failed. Sometimes, those will not show
on the Apple Hardware Test. But there are times when the booted
Disk Utility version on the Installer disc may note a problem in the
hard disk drive, via the SMART status of that hard drive.
Even that may not indicate an actual failure of the drive, after it has.
But kernel panics can be caused by several items, especially in an
older computer that has been around awhile. Some of those have a
history of a kernel panic relating to the logic board or other circuit;
and bad RAM is one of the causes of hardware related KPs.
If you can boot the computer from the Installer disc and run Disk Utility
from its options in the Installer header menu, the problem may be with
the internal hard disk drive. The unit may require further troubleshooting.
You may be able to find interested persons locally through a Mac user
group or someone at an affiliated service department who handles them.
Also, there are regional or local online listings for selling items where you
would actually meet the buyer or seller, often in a third or neutral location.
There are some fair take-apart links, some posted to these Discussions,
showing how to replace a hard disk drive, internal RAM, and optical drive;
and some users may also know of a source for more technical manuals.
If you had an external FireWire enclosure for a boot capable hard disk drive
you could try to further troubleshoot the iMac G4; set up correctly, you could
install OS X to an external drive. Not all FireWire HDD units are boot-capable.
Good luck & happy computing! -
WORKAROUND/SOLVED: Kernel panic on Macbook Air 5,2 on Lion 10.7.5 on wake
Hi all. I had been getting plagued by kernel panics with my relatively new Macbook Air (which I otherwise have had no issues with) when I did the following in sequence:
While connected to a power supply, lock screen
Close the lid
Disconnect power supply
Open the lid
For me, this seemed to have been caused by the Automatically adjust brightness option. To access it, go to System Preferences > Displays > Automatically adjust brightness, and uncheck the box. I also unchecked similar options that dim the screen before sleep in Energy Saver. This seems to have fixed it. I'm including the full kernel panic report -- if you're having problems with kernel panics, give it a try. I'm going to see for the next few days if this solves the issue. My guess is that this option and the display driver for this computer are really not playing well together in this version of Lion. I tried various other things:
Disabling bluetooth
Using pmset to set the hibernatemode to 0 as well as 25
Restting SMC
and none of them fixed it. This did, though, or at least it seems that way -- I am going to check for the next few days and see how it does. I am not running any third party kexts, though I do have a few third party launch agents for daemons, servers and such which have been installed via Homebrew. Feel free to comment. I am definitely a little underwhelmed by this kind of behavior coming from what is a several thousand dollar piece investment that is the most important piece of equipment for me to do my work on any given day, but if I can bypass it for now without too much of a loss in functionality, so be it.
Wed Nov 14 18:06:10 2012
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816a11f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010c0c4000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x3f1cb290b54fb5d7, RBX: 0xffffff80d17da000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80ef5cbb60, RBP: 0xffffff80ef5cbb70, RSI: 0x00000000b513b5c6, RDI: 0xffffff80d17da000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0x0000000000000200
R12: 0xffffff80d17da000, R13: 0x0000000000000000, R14: 0xffffff80d17da000, R15: 0xffffff80ef5cbbc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816a11f1, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x000000010c0c4000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80ef5cb810 : 0xffffff8000220792
0xffffff80ef5cb890 : 0xffffff80002c4794
0xffffff80ef5cba40 : 0xffffff80002da55d
0xffffff80ef5cba60 : 0xffffff7f816a11f1
0xffffff80ef5cbb70 : 0xffffff7f816a2413
0xffffff80ef5cbbb0 : 0xffffff7f81691e31
0xffffff80ef5cbca0 : 0xffffff7f816aec05
0xffffff80ef5cbce0 : 0xffffff7f81690257
0xffffff80ef5cbd10 : 0xffffff7f80c92832
0xffffff80ef5cbd50 : 0xffffff7f817184f0
0xffffff80ef5cbda0 : 0xffffff7f8171a692
0xffffff80ef5cbde0 : 0xffffff7f8171a7c4
0xffffff80ef5cbe20 : 0xffffff7f80c964c5
0xffffff80ef5cbe60 : 0xffffff7f80c96628
0xffffff80ef5cbe90 : 0xffffff7f80c99fd7
0xffffff80ef5cbef0 : 0xffffff800063d4d6
0xffffff80ef5cbf30 : 0xffffff800063c250
0xffffff80ef5cbf70 : 0xffffff800063c0f4
0xffffff80ef5cbfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000->0xffffff7f80cbffff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f8170d000->0xffffff7f8176afff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f80c30000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f8168d000->0xffffff7f816f3fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 108364440503
last loaded kext at 59338179474: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f807d9000, size 241664)
last unloaded kext at 78468272086: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814c7000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.7.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.75
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4As far as my question itself -- why does this happen? Has anybody had this issue on Lion and had it resolved on Mountain Lion?
-
Kernel Panic -- Graphics chip error! Restarted.
Anyone out there seen ridiculous gfx card/kernel errors with Adobe CS2? My machine runs weird every time that I use Photoshop or Illustrator. Batches don't finish, and I have even been getting kernel panics lately. I would post it to Adobe, but kernel panics and hardware errors fall into Apple's domain. Hardware/Software/OS is fine for all but CS2, including opengl/coreimage/corevideo apps. I have a quad g5 with an nvidia 6800 GT gfx card with dual cinema displays and a wacom tablet. OSX is up-to-date, as is CS2.
Here's a snippet from my rather scary system log for yesterday, when I was attempting to run a batch process in illustrator...my logs are peppered with graphics chip errors every time that I use CS2. Any options other than wait for a new gfx driver from Apple or keep re-running the hardware tests?
Feb 5 03:15:01 bourbon cp: error processing extended attributes: Operation not permitted
Feb 5 08:55:06 bourbon ntpd[158]: time reset 0.443060 s
Feb 5 18:27:49 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:27:51 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:27:51 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 18:28:19 bourbon /Applications/Adobe Illustrator CS2/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator: Emergency Save Failed
Feb 5 22:59:03 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:44 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:45 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:52 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:56 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:56 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:58 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 22:59:58 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:04 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:06 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:07 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:07 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:08 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:12 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:15 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:16 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:19 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:20 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:21 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:21 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:22 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:23 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:24 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:25 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:27 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:27 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:28 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:30 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:31 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:32 bourbon kernel[0]: Graphics chip error! Restarted.
Feb 5 23:00:35 bourbon /Applications/Adobe Illustrator CS2/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator: Emergency Save Failed
Feb 5 23:37:58 bourbon crashdump[828]: Adobe Illustrator crashed
PowerMac G5 Mac OS X (10.4.8)
PowerMac G5 Mac OS X (10.4.8) CS2, nvidia 6800 GT, kernel panicHere are the relevant snippets from panic log...I got a new wacom tablet in January. From the logs, it looks like 1 USB panic and 2 gfx driver panics this year....
Sun Jan 14 18:41:43 2007
panic(cpu 3 caller 0x0003FFE8): zalloc: "ipc kmsgs" (3061024 elements) retry fail 3
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x0003FFE8 0x0001A308 0x0001AA8C 0x000295B0 0x002E84C4
0x002BD140 0x002BD294 0x002BF230 0x00446A0C 0x004D0E08 0x002EB00C 0x0008C318 0x0002921C
0x000233F8 0x000ABAAC 0x6B3C2F73
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBUserClient(2.5.0)@0x4cc000
dependency: com.apple.iokit.IOUSBFamily(2.5.6)@0x43e000
com.apple.iokit.IOUSBFamily(2.5.6)@0x43e000
Proceeding back via exception chain:
Exception state (sv=0x60BBF280)
PC=0x9000AB48; MSR=0x0000D030; DAR=0x36CE7000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xF0080A20; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
Sun Jan 14 22:14:00 2007
Unresolved kernel trap(cpu 3): 0x300 - Data access DAR=0x000000007970E34E PC=0x0000000000939D3C
Latest crash info for cpu 3:
Exception state (sv=0x60C3BA00)
PC=0x00939D3C; MSR=0x00009030; DAR=0x7970E34E; DSISR=0x40000000; LR=0x00939D24; R1=0x4684BB40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00949814 0x00922EE0 0x002E8A34 0x002EA900 0x0008BEC4
0x0002921C 0x000233F8 0x000ABAAC 0x4D697861
backtrace terminated - frame not mapped or invalid: 0xBFFFE050
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Proceeding back via exception chain:
Exception state (sv=0x60C3BA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x60988500)
PC=0x9000AB48; MSR=0x0200F030; DAR=0x3715D000; DSISR=0x42000000; LR=0x9000AA9C; R1=0xBFFFE050; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 3 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x60C3BA00)
PC=0x00939D3C; MSR=0x00009030; DAR=0x7970E34E; DSISR=0x40000000; LR=0x00939D24; R1=0x4684BB40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00949814 0x00922EE0 0x002E8A34 0x002EA900 0x0008BEC4
0x0002921C 0x000233F8 0x000ABAAC 0x4D697861
backtrace terminated - frame not mapped or invalid: 0xBFFFE050
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Exception state (sv=0x60988500)
PC=0x9000AB48; MSR=0x0200
Sun Feb 4 13:53:46 2007
Unresolved kernel trap(cpu 3): 0x300 - Data access DAR=0x000000007BA1A34E PC=0x0000000000939E14
Latest crash info for cpu 3:
Exception state (sv=0x61ACE500)
PC=0x00939E14; MSR=0x00009030; DAR=0x7BA1A34E; DSISR=0x40000000; LR=0x0093A82C; R1=0x46753AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0093B6C4 0x0093A82C 0x00935D5C 0x00922C74 0x002E8A34 0x002EA900
0x0008BEC4 0x0002921C 0x000233F8 0x000ABAAC 0x3C3C3C3C
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Proceeding back via exception chain:
Exception state (sv=0x61ACE500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x60D3C000)
PC=0x9000AB48; MSR=0x0200F030; DAR=0x01852808; DSISR=0x0A000000; LR=0x9000AA9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 3 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 3:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x61ACE500)
PC=0x00939E14; MSR=0x00009030; DAR=0x7BA1A34E; DSISR=0x40000000; LR=0x0093A82C; R1=0x46753AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0093B6C4 0x0093A82C 0x00935D5C 0x00922C74 0x002E8A34 0x002EA900
0x0008BEC4 0x0002921C 0x000233F8 0x000ABAAC 0x3C3C3C3C
backtrace terminated - frame not mapped or invalid: 0xBFFFE240
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x917000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x45f000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x714000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x738000
dependency: com.apple.NVDAResman(4.1.8)@0x74e000
Exception state (sv=0x60D3C000)
PC0
PowerMac G5 Mac OS X (10.4.8) -
Kernel Panic when using AppleTalk via AirPort Express
I thought that the issues pertaining to kernel panics when using AppleTalk to connect via AirPort to remote server were solved in the latest (10.5) version of MacOSX - but they are unfortunately not solved.
ok, so I connect to the remote (macosx) server via the "Connect to..." menu item in Finder. i have a working internet connection up and running via AirPort {AirPort Extreme (0x14E4, 0x87) Firmware: Broadcom BCM43xx 1.0 (4.170.46.9)}
i log in and all is fine - until midway through copying some files - kernel panic. the panics can occur even while doing stuff locally, while the AppleTalk connection is just sitting idle in the background.
i am on MacOSX 10.5.4, iMac 2.16 Ghz Core 2 Duo, 2 GB RAM.
the kernel panics have been occuring since the Leopard upgrade - never before (on either this machine or my older iMac G5).
any suggestions?
thanks in advance,
tobiashere's what i found in the panic.log (do you need another log file?):
Tue Sep 9 14:46:14 2008
panic(cpu 1 caller 0x001A8CD4): Kernel trap at 0x00376810, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b4, CR3: 0x01191000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x051774f0, EDX: 0x00000000
CR2: 0x000000b4, EBP: 0x347ab008, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010206, EIP: 0x00376810, CS: 0x00000008, DS: 0x03ef0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x347aae28 : 0x12b0fa (0x4592a4 0x347aae5c 0x133243 0x0)
0x347aae78 : 0x1a8cd4 (0x46280c 0x376810 0xe 0x461fbc)
0x347aaf58 : 0x19ede5 (0x347aaf70 0x7fffffff 0x347ab008 0x376810)
0x347aaf68 : 0x376810 (0xe 0x48 0x347a0010 0x530010)
0x347ab008 : 0x37686c (0x0 0x0 0x347ab028 0x3778fa)
0x347ab028 : 0x7249de (0x0 0x1 0x40 0x1a9b51)
0x347ab078 : 0x3a6a28 (0x48c7d00 0x6e763fc 0x0 0x347ab12c)
0x347ab118 : 0x3b9a0c (0x6e763fc 0x0 0x0 0x30566400)
0x347ab1c8 : 0x34697036 (0x6e763fc 0x347ab73c 0x30566400 0x0)
0x347ab778 : 0x3a6ad9 (0x0 0x30557300 0x41f7780 0x0)
0x347ab818 : 0x3b9a0c (0x5a747f8 0x0 0x0 0x30568200)
0x347ab8c8 : 0x346ab982 (0x5a747f8 0x347ab934 0x30568200 0x0)
0x347ab988 : 0x346abf0d (0x53f2004 0x0 0x535c004 0x29)
0x347ab9d8 : 0x346adaa6 (0x53f2004 0x0 0x535c004 0x29)
0x347aba58 : 0x346a14bd (0x53f2004 0x1 0x2 0xe93f)
0x347abad8 : 0x346a189c (0x53f2004 0x6478004 0x0 0x2)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.afpfs(8.5.7)@0x3469e000->0x346e2fff
com.apple.nke.asp_tcp(4.6.2)@0x34694000->0x3469dfff
at.obdev.nke.LittleSnitch(2.0.10)@0x71e000->0x73efff
BSD process name corresponding to current thread: quicklookd
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: iMac5,1 (Mac-F4228EC8)
br,
tobias -
Many kernel panics, possible dead logic board?
I hope someone can help my diagnose my recently quirky iMac G4 1 ghz 17 in flat panel. I currently have a 250 G Seagate hard drive, 1 G memory. It's running Tiger 10.4.11...or attempting to run it.
This computer ran beautifully until several weeks ago when I foolishly attempted to upgrade to Leopard. Only about a third of Leopard got installed when the system froze and crashed. I managed to access the hard drive and did a complete wipe and install of good old Tiger, upgraded to 10.4.10 which ran without a glitch in the past.
However, even after this clean reinstall I continued to get freezes and kernel panics. I repaired all permissions carefully after each upgrade and I ran Disk Utility with no problems detected and no repairs needing to be done. I tried to run Disk Warrior to double check but continued to have system freezes and kernel panics while running Disk Warrior!! The panics were/are intermittent. The computer behaves fine until I've used it for a few hours, then crashes, usually while I am in Safari or iTunes, but occasionally I will get a panic at start up.
I have replaced the hard drive with a brand new one as it was still under warranty. I tested the memory and determined by process of elimination that the stick of RAM on the logic board was not functioning. I replaced that.
So, I have a new hard drive and functional memory and tried a Tiger fresh reinstall yet again today. The system continues to crash episodically...used the computer for a few hours this am before I got a kernel panic. This afternoon it resuscitated itself enough to let me put upgrade 10.4.5 on it and crashed in the middle of the upgrade! Bear in mind the machine's run all these upgrades and functioned fine in the past.
I think I obviously have a hardware problem and since I've recently replaced the hard drive and both memory modules as well as done a fresh reinstall of the OS version this iMac used to run perfectly, I'm thinking I have a logic board issue.
Any opinions or suggestions on how I might get these issues worked out would be very much appreciated!Thanks for responding. Yes, I've already followed all those suggestions to the letter. Unfortunately I do not have the original Apple Hardware Test disc that came with this computer. I have oredered a copy of Tech Tool Pro and plan to run it but it has yet to arrive.
I let the computer rest overnight and it booted right up and so far no freezes or panics, I've been using it about a half-hour.
Of note, in the kernel panic log folder it says,
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000017FCBA10 PC=0x0000000000081F1C
Latest crash info for cpu 0:
Exception state (sv=0x2E9CC780)
PC=0x00081F1C; MSR=0x00009030; DAR=0x17FCBA10; DSISR=0x42000000; LR=0x0008223C; R1=0x17FC3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0008223C 0x00062D04 0x000A81F8 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x2E9CC780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2E9CB000)
PC=0x00013110; MSR=0x00009030; DAR=0x006D55FC; DSISR=0x40000000; LR=0x0001227C; R1=0x17FC3DA0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000002 0x0001227C 0x00022864 0x000AC02C 0x1E010000
Exception state (sv=0x2EA7A780)
PC=0x9000B208; MSR=0x0200D030; DAR=0x901A640C; DSISR=0x40000000; LR=0x9000B15C; R1=0xBFFFF100; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x2E9CC780)
PC=0x00081F1C; MSR=0x00009030; DAR=0x17FCBA10; DSISR=0x42000000; LR=0x0008223C; R1=0x17FC3A60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0008223C 0x00062D04 0x000A81F8 0x000ABD00
Exception state (sv=0x2E9CB000)
PC=0x00013110; MSR=0x00009030; DAR=0x006D55FC; DSISR=0x40000000; LR=0x0001227C; R1=0x17FC3DA0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000002 0x0001227C 0x00022864 0x000AC02C 0x1E010000
Exception state (sv=0x2EA7A780)
PC=0x9000B208; MSR=0x0200D030; DAR=0x901A640C; DSISR=0x40000000; LR=0x9000B15C; R1=0xBFFFF100; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
I hope this might help. Thanks again. -
Kernel panic immediately after connecting Android via USB
Hi!
I am getting a kernel panic immediately after I connect my Android phone via MTP. It wasn't happening before (on pre-Yosemite version).
It may be relevant to know that I installed Samsung Kies before, which installs it's kernel modules, but I removed both modules and software itself since then.
OS X Yosemite 10.10.1 (14B25)
MacBook Pro (Retina, 13-inch, Mid 2014)
2,8 GHz Intel Core i5
8 GB 1600 MHz DDR3
Intel Iris 1536 МБ
Anonymous UUID:
8665615D-E61C-C529-9014-C37C6BB9FEB7
Mon Dec 29 21:37:49 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff800701e80a): Kernel trap at 0xffffff7f8904c728, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80ed657000, CR3: 0x0000000249d80038, CR4: 0x00000000001626e0
RAX: 0x0000000000003ff8, RBX: 0x0000000010533000, RCX: 0x000000000000e078, RDX: 0xffffff80d90f6f89
RSP: 0xffffff8110f83910, RBP: 0xffffff8110f83940, RSI: 0xffffff8110f83840, RDI: 0x0000000000000000
R8: 0xffffff7f8905d71d, R9: 0x0000000000000008, R10: 0xffffff8007555a60, R11: 0x0000000000000000
R12: 0xffffff801acff000, R13: 0x0000000000000009, R14: 0xffffff80ed647020, R15: 0x0000000000003fef
RFL: 0x0000000000010293, RIP: 0xffffff7f8904c728, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80ed657000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8110f835c0 : 0xffffff8006f3a811
0xffffff8110f83640 : 0xffffff800701e80a
0xffffff8110f83800 : 0xffffff800703a443
0xffffff8110f83820 : 0xffffff7f8904c728
0xffffff8110f83940 : 0xffffff7f8904a88e
0xffffff8110f83980 : 0xffffff7f88fa186f
0xffffff8110f839b0 : 0xffffff7f88fa91c1
0xffffff8110f839d0 : 0xffffff7f88fa915d
0xffffff8110f83a00 : 0xffffff7f88fbd999
0xffffff8110f83a60 : 0xffffff7f88fb8739
0xffffff8110f83ab0 : 0xffffff7f88fc250a
0xffffff8110f83b30 : 0xffffff8007501156
0xffffff8110f83b60 : 0xffffff800750283b
0xffffff8110f83bc0 : 0xffffff8007500003
0xffffff8110f83d00 : 0xffffff8006fea517
0xffffff8110f83e10 : 0xffffff8006f3e91c
0xffffff8110f83e40 : 0xffffff8006f235a3
0xffffff8110f83e90 : 0xffffff8006f33e8d
0xffffff8110f83f10 : 0xffffff800700a142
0xffffff8110f83fb0 : 0xffffff800703ac66
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603A ]@0xffffff7f88f9f000->0xffffff7f8900bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f87724000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f880da000
com.apple.driver.AppleIntelHD5000Graphics(10.0)[C7C58F5A-B67C-3222-A925-15744468 8E57]@0xffffff7f8901a000->0xffffff7f89078fff
dependency: com.apple.iokit.IOSurface(97)[B4E2654D-4087-3875-9D59-E899A0A04F0E]@0xffffff7f8 7fe6000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f87724000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f880da000
dependency: com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f88f9f000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000006c00000
Kernel text base: 0xffffff8006e00000
__HIB text base: 0xffffff8006d00000
System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)
System uptime in nanoseconds: 370997774733658
last loaded kext at 370920828472959: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8962b000, size 20480)
last unloaded kext at 370983258406476: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8962b000, size 16384)
loaded kexts:
org.pqrs.driver.Karabiner 10.5.0
org.virtualbox.kext.VBoxNetAdp 4.3.14
org.virtualbox.kext.VBoxNetFlt 4.3.14
org.virtualbox.kext.VBoxUSB 4.3.14
org.virtualbox.kext.VBoxDrv 4.3.14
com.paceap.kext.pacesupport.snowleopard 5.9
com.apple.filesystems.smbfs 3.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AudioAUUC 1.70
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelHD5000Graphics 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleCameraInterface 5.23.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelFramebufferAzul 10.0.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOSurface 97
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
USB Device: Internal Memory Card Reader
USB Device: USB2.0 Hub
USB Device: Ableton Push
USB Device: USB-PS/2 Optical Mouse
USB Device: AudioBox USB
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
Model: MacBookPro11,1, BootROM MBP111.0138.B11, 2 processors, Intel Core i5, 2.8 GHz, 8 GB, SMC 2.16f68
Network Service: Wi-Fi, AirPort, en0
Graphics: Intel Iris, Intel Iris, Built-InPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
[SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)
Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
1. The computer freezes when the message is shown (cursor stops to blink).
2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
3. Short and long error messages that look similar to this guy's (except for the last line).
I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
BUG: Unable to handle kernel
--[End ...]--
note: udevd[225] exited with preempt_count 2
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
BUG: Unable to handle kernel paging request at f8d20076
Code: Bad EIP value.
EIP: ...
CRZ: ...
--[End ...]--
Kernel panic - not syncing: Attempted to kill the idle task!
Lock: Bad EIP value
Note: modprobe [296] exited with preempt_count 3
WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
BUG: Unable to handle kernel NULL pointer dereference at 00000286
BUG: Unable to handle kernel NULL pointer dereference at (null)
These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
So far I've tried to:
* Use the fallback mode - nope.
* Rerun mkinitcpio -p linux - nope.
* Append noapic and nomodeset to the kernel in GRUB - nope.
* Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
* Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
* Remove my custom settings in /etc/modprobe.d - nope.
* A lot of other things I've forgotten.
Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
Finally, here are some more information.
uname -a:
Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
[2011-08-26 15:14] Running 'pacman-color -Syu'
[2011-08-26 15:14] synchronizing package lists
[2011-08-26 15:18] Running 'pacman-color -Sy pacman'
[2011-08-26 15:18] synchronizing package lists
[2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
[2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2011-08-26 15:19] Generating locales...
[2011-08-26 15:19] en_US.UTF-8... done
[2011-08-26 15:19] en_US.ISO-8859-1... done
[2011-08-26 15:19] sv_SE.UTF-8... done
[2011-08-26 15:19] sv_SE.ISO-8859-1... done
[2011-08-26 15:19] Generation complete.
[2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
[2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
[2011-08-26 15:27] Running 'pacman-color -Syu'
[2011-08-26 15:27] synchronizing package lists
[2011-08-26 15:27] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
[2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:53] Running 'pacman-color -Syu'
[2011-08-26 15:53] synchronizing package lists
[2011-08-26 15:54] starting full system upgrade
[2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
[2011-08-26 16:03] removed heimdal (1.3.3-4)
[2011-08-26 16:03] removed eigen (2.0.15-1)
[2011-08-26 16:03] removed python2-qt (4.8.3-1)
[2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
[2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
[2011-08-26 16:04] removed libreoffice (3.3.2-2)
[2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
[2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
[2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
[2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
[2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
[2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
[2011-08-26 16:04] ----------
[2011-08-26 16:04] hostname is now in coreutils
[2011-08-26 16:04] domainname is now in yp-tools
[2011-08-26 16:04] their functionality might have changed slightly
[2011-08-26 16:04]
[2011-08-26 16:04] dnsdomainname remains in net-tools
[2011-08-26 16:04] ----------
[2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
filesystem: 755 package: 700
[2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
[2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
[2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
[2011-08-26 16:04] installed libgssglue (0.3-1)
[2011-08-26 16:04] installed libtirpc (0.2.2-2)
[2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
[2011-08-26 16:04] Fixing gshadow file ...
[2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
[2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
[2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
[2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-08-26 16:04] Updating certificates. This might take a while...
[2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
[2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
[2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-26 16:04] warning: directory permissions differ on run/
filesystem: 1777 package: 755
[2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
[2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
[2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
[2011-08-26 16:05] ATTENTION UDEV:
[2011-08-26 16:05] ----------
[2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
[2011-08-26 16:05] --
[2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
[2011-08-26 16:05] --
[2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
[2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-08-26 16:05] --
[2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-08-26 16:05] blacklisting in MODULES no longer works.
[2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
[2011-08-26 16:05] mod1.disable=1
[2011-08-26 16:05] or
[2011-08-26 16:05] modprobe.blacklist=mod1
[2011-08-26 16:05] --
[2011-08-26 16:05] The following modules are no longer unconditionally loaded:
[2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
[2011-08-26 16:05] --
[2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-08-26 16:05] --
[2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-08-26 16:05] takes precedence.
[2011-08-26 16:05] --
[2011-08-26 16:05] kbd and rtc devices are no longer world readable.
[2011-08-26 16:05] --
[2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
[2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
[2011-08-26 16:05] by X.
[2011-08-26 16:05] ---------------
[2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
[2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
[2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
[2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
[2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
[2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
[2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
[2011-08-26 16:05] installed libssh2 (1.2.9-1)
[2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
[2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
[2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
[2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
[2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
[2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
[2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
[2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
[2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
[2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
[2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
[2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
[2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-26 16:06] installed krb5 (1.9.1-3)
[2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
[2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
[2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
[2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
[2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
[2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
[2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
[2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
[2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
[2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
[2011-08-26 16:06] installed rtmpdump (2.4-1)
[2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
[2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
[2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
[2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
[2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
[2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
[2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
[2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
[2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
[2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
[2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
[2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
[2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
[2011-08-26 16:06] installed libupnp (1.6.13-1)
[2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
[2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
[2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
[2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
[2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
[2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
[2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
[2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-26 16:07] installed qjson (0.7.1-1)
[2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
[2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
[2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
[2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
[2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
[2011-08-26 16:08] installed eigen2 (2.0.16-1)
[2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
[2011-08-26 16:08] installed sip (4.12.4-1)
[2011-08-26 16:08] installed pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
[2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
[2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
[2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
[2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
[2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
[2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
[2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
[2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
[2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
[2011-08-26 16:08] installed nettle (2.2-1)
[2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
[2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
[2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
[2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
[2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
[2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
[2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
[2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
[2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
[2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
[2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
[2011-08-26 16:11] change your entry in /etc/rc.conf
[2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
[2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
[2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
[2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
[2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
[2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
[2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
[2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
[2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
[2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
[2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
[2011-08-26 16:11] have been removed from @INC.
[2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
[2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
[2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
[2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
[2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
[2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
[2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
[2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
[2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
[2011-08-26 16:12] installed mpg123 (1.13.3-2)
[2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
[2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
[2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
[2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
[2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
[2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
[2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
[2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
[2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2011-08-26 16:12] Updating TeX tree...
[2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
[2011-08-26 16:13] mktexlsr: Done.
[2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
[2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
[2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
[2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
[2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
[2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
[2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
[2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
[2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
[2011-08-26 16:13] Updating desktop and mime database...done.
[2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
[2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
[2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
[2011-08-26 16:13] installed lcms2 (2.2-1)
[2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
[2011-08-26 16:13] installed iproute2 (2.6.39-1)
[2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
[2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
[2011-08-26 16:13] Please append 'quiet' to your kernel command line.
[2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
[2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
[2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
[2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
[2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
[2011-08-26 16:14] installed qrencode (3.1.1-2)
[2011-08-26 16:14] installed prison (1.0-1)
[2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
[2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
[2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
[2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
[2011-08-26 16:15] installed ocaml (3.12.1-1)
[2011-08-26 16:15] installed libkipi (4.7.0-2)
[2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
[2011-08-26 16:16] installed libksane (4.7.0-2)
[2011-08-26 16:16] installed libkdcraw (4.7.0-2)
[2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
[2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
[2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
[2011-08-26 16:16] installed libmms (0.6.2-1)
[2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
[2011-08-26 16:16] installed ortp (0.16.5-1)
[2011-08-26 16:16] installed mediastreamer (2.7.3-3)
[2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
[2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
[2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
[2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
[2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
[2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
[2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
[2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-26 16:18] ==> Building image from preset: 'default'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [autodetect]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-26 16:18] 7278 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] ==> Building image from preset: 'fallback'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-26 16:18] 23389 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] installed linux (3.0.3-1)
[2011-08-26 16:18] installed linux-headers (3.0.3-1)
[2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
[2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
[2011-08-26 16:19] upgraded less (443-1 -> 444-1)
[2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
[2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
[2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
[2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
[2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
[2011-08-26 16:19] installed libtextcat (2.2-8)
[2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] LibreOffice has been split into several packages:
[2011-08-26 16:19] - libreoffice-common
[2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
[2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2011-08-26 16:19] the LibreOffice APIs and for creating
[2011-08-26 16:19] extensions (UNO components).
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] * you need to install at least one libreoffice-langpack
[2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
[2011-08-26 16:19] to see what additional extensions are prepared to install
[2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2011-08-26 16:19] for spell checking
[2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
[2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
[2011-08-26 16:19] installed libwps (0.2.2-1)
[2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
[2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] The jdk package is licensed software.
[2011-08-26 16:20] You MUST read and agree to the license stored in
[2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
[2011-08-26 16:20] Please relogin to include jdk in your PATH
[2011-08-26 16:20] installed jdk (7-3)
[2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
[2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
[2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
[2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
[2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
[2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
[2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
[2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
[2011-08-26 16:21] ERROR: Module nvidia is in use
[2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
[2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
[2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
[2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
[2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
[2011-08-26 16:21] ==> Documentation and samples are in separate packages:
[2011-08-26 16:21]
[2011-08-26 16:21] * opencv-docs
[2011-08-26 16:21] * opencv-samples
[2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
[2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
[2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
[2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
[2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
[2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
[2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
[2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
[2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
[2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
[2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
[2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
[2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
[2011-08-26 16:24] updating gtk.immodules... done.
[2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
[2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
[2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
[2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
[2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
[2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:26] Updating font cache... done.
[2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
[2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
[2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:27] Updating font cache... done.
[2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
[2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
[2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
[2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
[2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
[2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
[2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
[2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
[2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
[2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
[2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
[2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
[2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
/etc/rc.conf without any comments:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
/etc/mkinitcpio.conf without any comments:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata filesystems"
Please let me know if you need to know anything else.
Last edited by Mogger (2012-03-30 23:33:38)I've temporarily fixed the problem by doing the following:
removed cryptsetup (1.3.1-2)
removed lvm2 (2.02.88-1)
removed mdadm (3.2.2-4)
removed linux (3.0.6-2)
upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
installed gen-init-cpio (2.6.36-1)
upgraded udev (173-3 -> 167-2)
upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
installed kernel26 (2.6.38.5-1)
upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MOD_AUTOLOAD="yes"
MODULES=(!usblp !pcspkr)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
Last edited by Mogger (2011-10-11 14:04:20) -
Let's solve this kernel panic :)
OK here it is, just the facts.
Imac Intel slot-loading 20” Flatpanel, exactly as I bought it 2yrs ago from applestore(haven’t touched any RAM or ever opened the computer)
Safari 10.4.1x (recently downloaded the most recent updates)
No backups, so I cannot Erase and Reinstall, my son’s pictures are on here. Save your flames for someone else.
I was running a disk-burning utility and the Itunes cover art screensaver was on (the screensaver being my most probable suspect for crash because of its documented bugginess, but the cause is moot for me at this point.) I came back to my mac to check the progress and the screen was frozen on the screensaver (I want to note that the hue of the screensaver was pinkish as opposed to the actual color of the “album covers”, a not too subtle hint that somethin’ ain’t right) At this point nothing worked but a hard shutdown by holding the power button. Upon restart, kernel panic. Sigh
After several days of reading forums I present to you my not so unique, but as of yet unsolved problem, and a list of what I have tried unsuccessfully to do to resolve it. I am pasting this in several forums hoping to resolve it so you can search if someone does come up with a solution. Pardon me if I mix up cmd, option, ctrl, and alt…I am using a PC keyboard. I know what keys to press through trial and error at this point, I just don’t know what they’re called on macs :P ..
-zapped PRAM, take note a mac “compatible” keyboard is needed for this (Logitech g15 doesn’t work for this task, but the cheapie Logitech “Classic”200 does, focus on the problem people)
-C after startup to boot Installation disk and running Disk utility/Repair Disk gives error
Checking HFSPlus volume
/red catalog file entry not found for extent
Volume check failed
Error: The underlying task reported failure
Techtool Deluxe showed error in repairing the volume and directory tests, the rest passed
The partition which previously held Windows and has now been erased and formatted in an unsuccessfull attempt to install a copy of OSX onto reports as “no problems detected”: Attempts to erase this partition and install OSX onto it result in errors
-Shift(safe mode) gives kernel panic
-cmd/alt-O/F Firmware boot gives kernel panic
-T at startup makes a target disk I guess but since I don’t have several mac computers laying around this isn’t a viable option atm
-cmd/V (Verbose mode) loads the info below and stops
-cmd /S (Single User Mode) does the same as verbose mode, I am unable to type at the prompt, it is essentially frozen at the end
-Option at startup only gives kernel panic
-Archive and Reinstall-The main hard drive won’t mount so it seems all I will be able to do is erase that partition
- I think I covered all of them, If I missed something, it didn’t help, either :P
-I tried a brief attempt at giving myself a crash course in terminal bash commands, but decided to do this before I rack my brain over that (as a last resort I will learn to program another **** language that will become useless in a few years before I erase my son’s pictures)…..the terminal is the only place I could run a fsck but it just returns the next prompt, no sign that it did anything,
-I have heard that occasionally some people’s KP’s “resolve themselves”. I am not sure if this is while the panic screen is showing or just on a successive reboot. I would love for that to happen here. That would be BCS(Best Case Scenario)
Following is what appears when I start in Verbose or Single-user mode
Se .Looking for kernel cache file ‘System\Library\Caches\com.apple.kernelcahes\kernelcache.BC122279…………………………………… …………………<then pause for 30-45sec, then “finishes quickly with script below which goes too quick for me to read>
Loading mach kernel?
Read error (hexadecimal#)
………………………………………………………………………………………………root device uuid?
loading drivers?
<next screen>
I will just put some of the stuff here that might describe an error, and some stuff to give you an idea where it comes in –the hexadecimal numbers(hex)
Started CPU 01
BSM auditing present
Disabled
Rooting via boot-uuid from/chosen:
Waiting on <dict ID=”0”><key>IOProviderClass</key>…yadayadayada
USB caused wake event (EHCI)
Firewire…yada
Got Boot device = yadayada
BSD root
CSRHIDTransitionDriver::probe: -v (I am assuming that this is where it picks up my input to enter Verbose mode)
CSRHIDTransitionDriver::start before command (single user mode prints “probe booting in single-user... do not match then skips the next two lines)
CSRTransitionDriver::stop
IOBluetoothController::start Idle Timer Stopped
Disk0s2: Hex# (Undefined).
Disk0s2: Hex#(Undefined).
Disk0s2:data underrun.
Pid 1 exited (signal 0,exit 1)panic(cpu 1 caller hex#): init died
State at last exception:
Debugger called: <panic>
Backtrace, Format – Frame : Return address (4 potential args on stack)
Hex# :Hex# more hex #’s No mapping exists for frame pointer
Backtrace terminated – invalid frame pointer 0xbffff968
Kernel version yada yada yada
That’s it. Same happens in single-user mode. The cursor stops and I have to restart.
I can access the original install disc and suspect that if I can delete the cache files, or preference files, or whatever is pointing the boot sequence to the corrupted info I would be okay
*okay this is new, after clicking restart from “startup disk” on Installation disk I was holding down shift to try a safe boot again, and as the Kp screen came down there was text on the screen
panic(cpu 0 caller 0x00399CA3) : Unable to find driver for this platform: “ACPI”.
Debugger…yada yada invalid frame pointer 0x0
It seems if I choose to use the install disks option to startup to the install disk then I can properly boot into single user mode in which fsck does work but it checks the install disk and not the HD, any way to switch that? is the HD "mounted at this point?Well, either way you will probably be spending a little money and more time on
the Mac project; the difference in buying a relatively inexpensive external FW
HDD and learning how to use it (and have it for backups and doing your own
tech work) -- or -- not having it, and paying someone who does have those tools
on-hand, is you won't have the hardware or ability to backup your stuff, or fix it.
You can get a good FW enclosed backup hard disk drive of reliable quality
from Other World Computing and use free Carbon Copy Cloner. You have
the computer's bootable install disc with its own Disk Utility & tools in it.
I like my LaCie 250GB FireWire externally enclosed (self contained including
a separate power supply; it can boot and run my Macs from clones I made)
and there is room enough for more than two complete computer content clones.
Bootable exact images of the entire contents of the machines.
Had I paid for a tech to do the troubleshooting (48 hours at a time, for three
months) on the one Mac, there is no way I could have afforded the computer
or the tech bill. And I found out things through doing for myself that my friends
who use Windows machines (and they take them apart, and curse them) don't
yet understand. The cure for the few Mac issues outside of some large part
failure, is to be self-sufficient in the things a user CAN do. Then the shop visit
is a rarer event, and money spent on hardware is better than on gasoline.
Gasoline here varies, on the road system from over $4 a gallon (near $5 diesel)
up to nearly $7-$9 a gallon where fuels are barged or air flown in. Think about that
when or if you eat any salmon caught in Alaskan waters... Most of the fleet is
sitting in the docks, so driving in a modern city is a matter of greater efficiency
and foresight. You could take a chance on that $1200. hydrogen cell kit's claims!
Good luck & happy computing!
PS: are you sure that you didn't spring for that AppleCare extended protection plan
back in the first year of ownership where it could have cost you maybe $160. and
added up to three years of extra coverage and tech support? If you did an enrolled it
then it would be a matter of getting the computer to an authorized shop for service.
edited. -
Kernel Panics - new logic board less that week old
Having new Kernel panics with new logic board, trying to track down, any help appreciated.
Problem description:
Kernel Panics
EtreCheck version: 2.1.1 (104)
Report generated December 8, 2014 at 3:20:27 PM MST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
E2351 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 3:29:8
Disk Information: ℹ️
Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SSD Drive (disk1) / : 510.74 GB (158.73 GB free)
Core Storage: disk0s2 511.12 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Capture One.app
[not loaded] com.Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) [Support]
/Library/Extensions
[not loaded] com.wacom.kext.ftdi (1 - SDK 10.9) [Support]
/System/Library/Extensions
[not loaded] com.wacom.kext.pentablet (5.2.6) [Support]
[not loaded] com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[not loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[invalid?] com.smartlaunch.usbdetection.plist [Support]
[running] com.wacom.pentablet.plist [Support]
[running] com.wacom.wacomtablet.plist [Support]
[running] com.xrite.colormunkid.plist [Support]
[running] com.xrite.device.message.plist [Support]
[loaded] com.xrite.device.softwareupdate.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[running] com.fxtech.fxlm.plist [Support]
[not loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.xrite.device.xrdd.plist [Support]
[loaded] org.cindori.CCAuth.plist [Support]
[loaded] org.cindori.TEAuth.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.akamai.single-user-client.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
ColorMunki Photo Tray Application (/Library/Application Support/Colormunki/Photo/Tools/ColorMunki Photo Tray.app)
HazelHelper Application (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Xmarks for Safari Application (/Applications/Xmarks for Safari.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.2.4.18058 [Support]
nplastpass: Version: 2.0.15 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 [Support]
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]
Picasa: Version: 1.0 - SDK 10.4 [Support]
Safari Extensions: ℹ️
Adguard AdBlocker
SigBOP Gmail Edition
Google Analytics Opt-out Browser Add-on
DuckDuckGo
1Password
AdBlock
ClickToPlugin
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Support]
Flash Player [Support]
Hazel [Support]
Java [Support]
WacomTablet [Support]
Xmarks for Safari [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
SSD Drive: Disk size: 510.74 GB Disk used: 352.02 GB
Destinations:
4tb [Local]
Total size: 4.00 TB
Total number of backups: 32
Oldest backup: 2014-09-26 06:32:36 +0000
Last backup: 2014-12-08 17:41:20 +0000
Size of backup disk: Excellent
Backup size 4.00 TB > (Disk size 510.74 GB X 3)
Top Processes by CPU: ℹ️
9% WindowServer
1% Google Chrome
0% fontd
0% SystemUIServer
0% xrdd
Top Processes by Memory: ℹ️
223 MB Google Chrome
155 MB mds_stores
137 MB spindump
137 MB Xmarks for Safari
137 MB Google Chrome Helper
Virtual Memory Information: ℹ️
9.82 GB Free RAM
4.42 GB Active RAM
1.25 GB Inactive RAM
1.69 GB Wired RAM
2.41 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 8, 2014, 11:51:56 AM Kernel_2014-12-08-115156_Macs-Rule-6.panic [Details]
Dec 8, 2014, 11:51:53 AM Self test - passed
Dec 6, 2014, 02:34:35 PM AutopanoGiga_2014-12-06-143435_Macs-Rule-6.cpu_resource.diag [Details]
Dec 6, 2014, 02:08:06 PM Photomatix Pro 5_2014-12-06-140806_Macs-Rule-6.cpu_resource.diag [Details]
Dec 5, 2014, 04:51:45 PM Adobe Photoshop Lightroom 5_2014-12-05-165145_Macs-Rule-6.cpu_resource.diag [Details]Anonymous UUID: 0C1E9F50-EC2F-D1F5-C7D4-4F126814B484
Mon Dec 8 11:51:56 2014
*** Panic Report ***
panic(cpu 1 caller 0xffffff800b5c4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff81f554be50 : 0xffffff800b13a811
0xffffff81f554bed0 : 0xffffff800b5c4594
0xffffff81f554bf40 : 0xffffff800b5c425c
0xffffff81f554bf50 : 0xffffff800b64dcb2
0xffffff81f554bfb0 : 0xffffff800b23ac46
BSD process name corresponding to current thread: launchd
Boot args: kext-dev-mode=1
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x000000000ae00000
Kernel text base: 0xffffff800b000000
__HIB text base: 0xffffff800af00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 87870352045366
last loaded kext at 79021054039689: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8e3d0000, size 20480)
last unloaded kext at 79081670086473: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8e3d0000, size 16384)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.AMDRadeonX3000 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.7.21
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.kext.AMD6000Controller 1.2.8
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 16 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x435438473353313333394D2E4D3136464552
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x435438473353313333394D2E4D3136464552
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Crucial_CT512MX100SSD1, 512.11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
Maybe you are looking for
-
I just purchased an APPLE TV. I also own a ROKU and found a great app to use instead of the included remote, is there a similar app to purchase for my new apple device.? I like a keypad to use when typing in info.also is there any way to get the Glen
-
How can i post a submit request in the processRequest
i want to post a submit request in the processRequest. it's meaning when i first time come to the page, after running processRequest, I need run the processFormRequest. it's like the dialog page which forward the current page, it will run processRequ
-
Tcode in production client but not in development & quality client
I am facing this particular situation, I am seeing a particular Ztode which is in production client but not in development & quality client Is it possible to have a tcode in production client but not in development & quality client, If yes what would
-
HT4972 Updating without syncing
Can you update an iPad 2 to iOS5.1.1 if you do not have an iTunes library? I.e. if you do not sync your iPad at all, to any other device.
-
Plotting a Geometry-(mdsys_sdo_geom) from Database on Map.
Can we Plot a Geometry---any geometry value stored in a database table column of type mdsys_sdo.geom onto a mapXtreme Map Object(in ASP) direcly by using any method of MapXtreme with Oracle or do we have to resort to getting all the co-ordinates of t