Kernel parameters for ebs 11.5.10 and db 10.2.0.4

HI,
is there any doc describing the kernel parameters(settings) in order to install the 11.5.10 EBS System on Linux Enterprise Edition(v. 4.6).... something like the Metalink note: 265121.1(Requirements for Installing Oracle9i R2 (9.2.0) on RHEL3)...
Thank you,
Sim

Sim,
Please refer to:
Note: 294932.1 - Recommendations to Install Oracle Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=294932.1
Note: 316806.1 - Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1

Similar Messages

Calculating Kernel parameters for Oracle 11g R2 db on solaris 10u9

Hi Everyone,
I have query regarding calculating the kernel parameters for deploying oracle 11g R2 db on solaris 10 v 5.10 update 09 machine , we have Ram size of 64gb.
My question is how to calculate shared memory ,shared memory identifiers,semaphores, semaphores identiifiers for creating resource control for the project(user.oracle).
And how to fine out the available semphore values allocated in system..
Thanks in Advance.
Edited by: 898979 on Dec 15, 2011 10:24 PM

Hi;
For those setting mention in installation guide which is already shared previous post.
I suggest also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Passing parameters for a query throught XML and capturing response in the same

Hi All,
I have defined a RequestParameters object and i am passing paramerts for a query through XML and trying to capture the result in the same and send back to the source. In this case i am send XML from excel.
Below is my XML format.
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Insert xmlns="http://tempuri.org/">
<dataContractValue>
<dsRequest>
<dsRequest>
<SOURCE></SOURCE>
<ACTION>Insert</ACTION>
<RequestParams>
<RequestParams>
<ACC_NO>52451</ACC_NO>
<EMP_CITY>HYD</EMP_CITY>
<EMP_NAME>RAKESH</EMP_NAME>
<EMP_CONTACT>99664</EMP_CONTACT>
<EMP_JOM>NOV</EMP_JOM>
<EMP_SALARY>12345</EMP_SALARY>
</RequestParams>
<RequestParams>
<ACC_NO>52452</ACC_NO>
<EMP_CITY>HYD</EMP_CITY>
<EMP_NAME>RAKESH</EMP_NAME>
<EMP_CONTACT>99664</EMP_CONTACT>
<EMP_JOM>NOV</EMP_JOM>
<EMP_SALARY>12345</EMP_SALARY>
</RequestParams>
</RequestParams>
</dsRequest>
<dsRequest>
<SOURCE></SOURCE>
<ACTION>Update</ACTION>
<RequestParams>
<RequestParams>
<ACC_NO>52449</ACC_NO>
<EMP_CITY>HYD1</EMP_CITY>
<EMP_NAME>RAKESH1</EMP_NAME>
<EMP_SALARY>1345</EMP_SALARY>
</RequestParams>
<RequestParams>
<ACC_NO>52450</ACC_NO>
<EMP_CITY>HYDer</EMP_CITY>
<EMP_NAME>RAKEH</EMP_NAME>
<EMP_SALARY>1235</EMP_SALARY>
</RequestParams>
</RequestParams>
</dsRequest>
</dsRequest>
</dataContractValue>
</Insert>
</s:Body>
</s:Envelope>
Where i have a List of dsRequest and RequestParams, where i can send any number of requests for Insert,Update. I have two a XML element defined in RequestParams "RowsEffected","error" where the result will be caputred and is updated
to the response XML.
I have 6 defined in RequestParams
EMP_SALARY(int),ACC_NO(int),EMP_CITY(string),EMP_NAME(string),EMP_CONTACT(string),EMP_JOM(string)
My Question is:
When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
                ResponseParams.Add(
newdsResponse()
                    ACTION = OriginalParams[a].ACTION,
                    SOURCE = OriginalParams[a].SOURCE,
                    Manager = OriginalParams[a].Manager,
                    RequestParams = OriginalParams[a].RequestParams
Where the OriginalParams is dsRequest
Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
Is there any way i can avoid this and build response with only the parameters given in the Request ??
Appreciate ur help..Thanks
Cronsey.

Hi Kristin,
My project is, User will be giving the parameters in the excel, and using VBA, the values are captured and an XML is created in the above mentioned format and is send to web service for the Insert/Update.
I created a webservice which reads the values from <datacontract> and it consist of list of <dsRequests> where any number of Insert/Upate commands can be executed, with in which it contains a list of <RequestParams> for multiple insertion/Updation.
//function call
OriginalParams = generator.Function(query, OriginalParams);
where OriginalParams is List<dsRequest>
//inside function
command.Parameters.Add()// parameters adding
int
val = command.ExecuteNonQuery();
after the execution,an XML element is added for the response part.and it is looped for all the RequestParams.
OriginalParams[i].Result.Add(
newResult()
{ ERROR = "No Error",
ROWS_EFFECTEFD = 1 });
//once all the execution is done the response building part
for(inta
= 0; a < OriginalParams.Count; a++)
                ResponseParams.Add(
newdsResponse()
                  Result = OriginalParams[a].Result
QUEST: When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
Is there any way i can avoid this and build response with only the parameters given in the Request ??
Appreciate ur help..Thanks
Cronsey.

How to read three parameters for exemple temperature,current and voltage from the same port with visa read and separate them in a table

Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.

[email protected] wrote:
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
The short answer is: "Yes, of course." But you are going to have to do the legwork and learn LabVIEW basics before we can offer meaningful help.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Kernel Parameters on Red Hat Linux

The installation instructions require us to set cetain kernel
parameters, such as SHMMAX, SHMSEG, SEMMNS, and so on.
Does anyone know how this is done for Red Hat Linux? I have
been hunting around the documentation and public domain web-
sites for a couple of weeks now and I haven't found any
reference to how to set these parameters.
Eternally grateful for any insights...
Cheers!
Stuart Housden
null

I had problems with 8i and 32Meg of SHMMAX (sometimes, when I
published an EJB, Oracle crashed). I didn't recompiled the
kernel, only did
echo 134217728 > /proc/sys/kernel/shmmax.
This limited the maximum shared memory to 128Meg (I installed
with JavaVM enabled), and I my problems got away.
Robson.
Anwar (guest) wrote:
: Stuart Housden (guest) wrote:
: : The installation instructions require us to set cetain kernel
: : parameters, such as SHMMAX, SHMSEG, SEMMNS, and so on.
: : Does anyone know how this is done for Red Hat Linux? I have
: : been hunting around the documentation and public domain web-
: : sites for a couple of weeks now and I haven't found any
: : reference to how to set these parameters.
: : Eternally grateful for any insights...
: : Cheers!
: : Stuart Housden
: This question was replied to multiple times on the list before,
: but here goes. Check out:
: http://jordan.fortwayne.com/oracle
: Basically, you have to edit the kernel header files, and
: recompile the kernel. Read the Kernel-HOWTO too.
: Anwar.
null

Trouble building kernel module for sensor support

Hi, I'm new here but have been using Arch for a while. Recently, I decided to install Arch on an old laptop (Toshiba A70) and have managed to work out most of the kinks to where it runs nicely. Unfortunately, ACPI support is spotty and the /sys/class/thermal directory gives me only cooling_device0. I installed the lm-sensors package and ran sensors-detect, which yielded no results. Although the laptop runs smoothly otherwise, I would like to know the CPU's temp so that I would be able to set up a fan control scheme and CPU scaling (so far it's stuck at the lowest frequency, and that's kind of a big deal for me since the laptop runs on an archaic mobile P4 chip).
Sorry for the story but I felt some context was necessary. I did manage to find a kernel module that would connect those sensors to ACPI for me (http://sourceforge.net/projects/omnibook/), however I'm having trouble building it on the latest kernel. Here is the output from running make:
make -C /lib/modules/3.16.1-1-ARCH/build SUBDIRS=/root/omnibook-2.20070211 modules
make[1]: Entering directory '/usr/lib/modules/3.16.1-1-ARCH/build'
CC [M] /root/omnibook-2.20070211/init.o
In file included from /root/omnibook-2.20070211/init.c:26:0:
/root/omnibook-2.20070211/laptop.h:25:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:25:3: warning: (near initialization for ‘omnibook_ids[0].callback’)
/root/omnibook-2.20070211/laptop.h:34:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
/root/omnibook-2.20070211/laptop.h:34:3: warning: (near initialization for ‘omnibook_ids[1].callback’)
/root/omnibook-2.20070211/laptop.h:43:3: warning: initialization from incompatible pointer type
.callback = dmi_matched,
^
// I left out most of the 'incompatible pointer type' warnings since they repeat for a while.
^
/root/omnibook-2.20070211/laptop.h:1001:3: warning: (near initialization for ‘omnibook_ids[108].callback’)
/root/omnibook-2.20070211/init.c: In function ‘dmi_matched’:
/root/omnibook-2.20070211/init.c:141:16: warning: assignment discards ‘const’ qualifier from pointer target type
laptop_model = dmi_get_system_info(DMI_PRODUCT_VERSION);
^
/root/omnibook-2.20070211/init.c: In function ‘omnibook_init’:
/root/omnibook-2.20070211/init.c:281:3: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration]
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:281:14: warning: assignment makes pointer from integer without a cast
proc_entry = create_proc_entry(feature->name, pmode, omnibook_proc_root);
^
/root/omnibook-2.20070211/init.c:290:13: error: dereferencing pointer to incomplete type
proc_entry->data = feature;
^
/root/omnibook-2.20070211/init.c:291:13: error: dereferencing pointer to incomplete type
proc_entry->read_proc = &procfile_read_dispatch;
^
/root/omnibook-2.20070211/init.c:293:14: error: dereferencing pointer to incomplete type
proc_entry->write_proc = &procfile_write_dispatch;
^
/root/omnibook-2.20070211/init.c:294:13: error: dereferencing pointer to incomplete type
proc_entry->owner = THIS_MODULE;
^
cc1: some warnings being treated as errors
scripts/Makefile.build:257: recipe for target '/root/omnibook-2.20070211/init.o' failed
make[2]: *** [/root/omnibook-2.20070211/init.o] Error 1
Makefile:1333: recipe for target '_module_/root/omnibook-2.20070211' failed
make[1]: *** [_module_/root/omnibook-2.20070211] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.16.1-1-ARCH/build'
Makefile:88: recipe for target 'omnibook.ko' failed
make: *** [omnibook.ko] Error 2
I have honestly no idea what to make of any of this and would really appreciate any help towards a solution. Thanks for reading

Welcome to Arch Linux
That looks like it is a 2.6 kernel module
http://sourceforge.net/p/omnibook/bugs/58/
Did you try either of these AUR offerings?
ewaller$@$odin ~ 1001 %packer -Ss omnibook
aur/omnibook-git 20110911-9 (7)
Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops
aur/omnibook-svn-zen 268-1 (1)
Kernel module for HP OmniBook, Pavilion, Toshiba and Compal ACL00 laptops
ewaller$@$odin ~ 1002 %
Last edited by ewaller (2014-08-23 23:33:53)

Command line parameters for automator?

I'm trying to setup a cron job to so that every morning at 8 am "New Mail.workflow" will open and run. I'm able to get it to open but I was wondering if there were command line parameters for Automator that could open AND run a workflow file? Ideally I'd like it to close after running, but I'll worry about that later. Thanks in advance.

The preferred way is to save your workflow as an application and then call usr/bin/open on it. If for some reason you must have the workflow run inside of Automator (not self-contained) then you're looking at some quality time with man osascript. As it happens Apple has removed even the need for Cron for most users. A click to File -> Save As Plug-In -> for iCal handles it from start to finish.
Edit: I forgot to mention that Automator has its own simple command line utility for running *.workflow files. Check out man automator

How To Generate Debug Log Files for ebs jsp?

hi How To Generate Debug Log Files for ebs r12 jsp?
and where i get the log .please help me thanks!

Please check following MOS Document
Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

Regarding configuration of "Parameters for determining the basic dates"

Hi All,
Can anyone give inputs in which scenario we need to use the configuration "Parameters for determining the basic dates".
1)Do we have any restrictions for usage of above IMG configuration, 2) any pre-requisites to use the configuration of "Parameters for determining the basic dates" and 3)does configuration of this task is having any integration with any other modules, if yes what is the point of integration with other modules.
Thanks in advance.

Dear Aditya,
Parameters for determining the basic dates in production order are used to calculate the Basic Start date & End date of Production order. It Determines if and how the basic dates or the dependent requirements dates are adjusted during lead time scheduling. You can customize this in OPU3 for planned order & OPU5 for Production Order.
There are the following possibilities:
1.The basic dates are adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
2.The basic dates are not adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
3.The basic dates are adjusted and the dependent requirements are scheduled for the order basic start date.
4.The basic dates are not adjusted and the dependent requirements are scheduled for the order basic start date.
1)Do we have any restrictions for usage of above IMG configuration
For scheduling this has to be. If you want that start date should be calculated based on Inhouse production time & not on routing select opetion 2 or 4
2) any pre-requisites to use the configuration of "Parameters for determining the basic dates"
Not as such
3)does configuration of this task is having any integration with any other modules
Not directly but with MM to determine dependent requirement Proposal.
Regards
ABhijit Gautam.

TS1702 Anyone know how to get ipad 3 to get unstuck while its updating? My device froze for over a week now and cant access any of my documents cos of it and my uni assign due next mon. Help

My ipad 3 wont allow me to use any app that is 'updating' , im sure its frozen cos its been a week and still not finished updating. Worse part is,my uni assign is on pages and its due, and i can no longer access ANY doc on my ipad. I will fail my double unit for sure, destroy my gpa, and lose $5000 - the cost of the unit of study. Help fix this please.

Well, that got me part way there. When I typed
      /usr/local/bin/snort -?
I got
      dyld: Library not loaded: /sw/lib/libpcap.0.dylib
        Referenced from: /usr/local/bin/snort
        Reason: image not found
      Trace/BPT trap
so back through the same fire drill I went, this time with
      fink install libpcap
and finally, when I typed (again)
      /usr/local/bin/snort -?
I got
      /usr/local/bin/snort -?
       ,,_ -*> Snort! <*-
       o" )~ Version 2.4.0 (Build 18)
       '''' By Martin Roesch & The Snort Team: http://www.snort.org/team.html
       (C) Copyright 1998-2005 Sourcefire Inc., et al.
      USAGE: /usr/local/bin/snort [-options] <filter options>
      Options:
       -A Set alert mode: fast, full, console, or none (alert file alerts only)
                   {snip}
              -Z Set the performonitor preprocessor file path and name
              -z Set assurance mode, match on established sesions (for TCP)
              -? Show this information
      <Filter Options> are standard BPF options, as seen in TCPDump
So I made it! (I think) -- now, to figure out all the command line configuration parameters for the snort.conf files, and how to make it launch at startup....
Thanx, Gary!
j.v.

Understanding mkinitcpio, kernel parameters, and hooks.

I have a fairly complex setup involving dm-crypt volumes being unlocked pre-boot, so I'm somewhat familiar with mkinitcpio.conf and grub.cfg. However, I still have a burning question: are kernel parameters actually interpreted by the kernel? For example, the ip= parameter is included in the kernel documentation, leading me to believe that the kernel interprets this parameter and acts upon it during boot. On the other hand, the cryptdevice= parameter appears to be specific to the mkinitcpio encrypt hook (does not appear in kernel documentation) which interprets it and runs cryptsetup in early userspace. In this case, are kernel parameters simply being used as a vehicle in order to pass information from the boot loader to early userspace? If so, why couldn't this be done by including a configuration file directly in the initcpio, which could be parsed at boot-time? Such a configuration file seems like a superior means of passing information to early userspace, as different files could be used for different hooks, they could be of different formats (i.e. contain linebreaks), and would not be subject to the maximum kernel command line length.
In fact, it looks like some hooks already do this. For example, the sd-encrypt hook includes a file /etc/crypttab file directly in the initcpio image. Why would other hooks use kernel parameters when the early userspace filesystem is available for use?
I'm primarily asking just for educational purposes. Explanations are appreciated.

Spider.007 wrote:I think the ip-parameter is coincidentally the same as the net-module uses.
I found this in the mkinitcpio-nfs-utils ipconfig README:
These [parameters] (along with the ugliness of the long form) are present for compatibility with the in-kernel ipconfig code from 2.4 and earlier kernels.
which supports the hypothesis that the kernel parameter is left over from a time when network configurations were done in kernel-space. The syntax remained the same in the initcpio hook to maintain backwards comparability with older bootloader configurations. At least that's the impression I'm under.
Spider.007 wrote:The kernel is still responsible for mounting the rootfs; what has changed is that most distro's switched to initcpio's for reasons that are repeated on the wiki: ...
Yes, I believe the kernel itself performs the mount(2) which overwrites the / mountpoint with the real root filesystem after it is available. (But for all I know, a hook could be performing a mount(8) instead of the kernel!) What I meant was that the kernel no longer is responsible for all of the initializations necessary for the real root filesystem to become available (so the kernel can mount it), hence the need for initrd/initramfs/initcpio. Take dropbear_initrd_encrypt for example. Dropbear is a userspace SSH server. Without early userspace, an SSH server would have to be embedded in the kernel just for the 0.01% of users out there who need to be able to unlock volumes remotely. Early userspace allows complex systems like this (and other very different ones) to be configured without the need for patching the kernel.
I assume that some low-level kernel parameters (maxcpus= for example) are still relevant solely to the kernel, as things like SMP process scheduling can't easily be implemented in userspace.
Am I getting this right so far?
Last edited by EscapedNull (2015-01-13 19:40:50)

Y setting kernel parameters in linux and not in windows

Hi Can any one please help me out...
While installing oracle on linux we are setting some kernel parameters But when installing in windows are we setting any kernel parameters...We are not setting any parameters...can any one please explain why r we setting kernel parameters and what is the use of those parameters and why are we not setting any parameters in windows.

probably because linux != windows
anyway, there are still some recommendation you can follow, for example if you want to use more than 2Gb of memory in win32

ABAP and Kernel Patches for Upgrade and Conversion in 4.6C

Hi,
We are in a process of upgrade and unicode conversion for the source release 4.6C (Kernel 46D_EXT Patch 2225).
"Combined Upgrade&Unicode Conversion Guide" for "SAP Basis 4.6C u2192 SAP NetWeaver 7.0 application Server ABAP Unicode Including Enhancement Package 1 Support Package 01 - 06" , In Software Requirements step, it says
"3. Import 4.6D Kernel patch 2326 from SAP Service Marketplace according to SAP Note 19466"
We wanted to know whether "IT IS ABSOLUTELY NECCESSARY TO GO FOR THE KERNEL PATCH 2326". We dont have "EBCIDIC code pages" in our MDMP system.
We need to know becauase we are also doing OS migration from AIX to Sun and this step will add to our production downtime.
Please advice what are the other causes we should go for the kernel 2326.
Regards

Hello Mr. Nils Buerckel,
Thanks for the reply.
We wanted to be very sure whether we should used Kernel 46D Kernel patch 2326 (As it is specifically mentioned in the SAP CU&UC guide and in SAP Note 867193, It is mentioned that "This patch contains enhancements that are required to execute the "INDX Analysis" scan)
OR
Can we go for the latest kernel patch avaialable at market place? And Will the latest kernel patch also contains the "enhancements that are required to execute the "INDX Analysis" ?
Please reply
Thanks

Parameters for substr and dbms_lob.substr

The syntax for substr in SQL functions and for the function in dbms_lob package is not matching and hence confusing for programmers. It will be less confusing if parameters for both functions are of the same order.
In Sql functions the the syntax for substr is substr(string, offset, amount)
In dbms_lob package the syntax for the substr function is dbms_lob.substr(lob_loc, amount, offset)
Mohan

I think he wants to send a suggestion to Oracle via this forum.

Time out parameters for ABAP and JAVA instance

Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber S

jstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks

Kernel parameters for ebs 11.5.10 and db 10.2.0.4

Similar Messages

Maybe you are looking for