EDUCATION CESS IS NOT PICKING FROM MIGO.

HI
I AM CHANGED EXCISE BASE VALUE IN MIGO.WHILE DOING MIRO EXCISE IS CALCULATING ON THE BASIS OF PO. AND ITS SHOWING WRONG CALCULATION ON VAT.
REGARDS
SARINBAVA
Edited by: Csaba Szommer on Feb 4, 2012 8:34 PM

Hi,
Check condition type for Secondary education cess is there  in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
SPRO --> Logistics general > tax on Goods Movements> India >  Classify Condition>Condition-Based Excise Determination Types
Also check TAX Procedure in t.code: OBYZ  & see condition type for Secondary education cess is there   with all condition types and all are placed with a logic to calculate taxes with total price.
Regards,
Biju K

Similar Messages

  • Secondary education cess is not refected in migo

    Dear sir,
    I have created  condition type for import purchase order .Basic excise duty,cvd,Ecs etc...
    All condition type is reflected in migo screen at time of good receipt but SeCess is not reflected so please guide me to solve this problem.

    Hi,
    Check condition type for Secondary education cess is there  in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
    SPRO --> Logistics general > tax on Goods Movements> India >  Classify Condition>Condition-Based Excise Determination Types
    Also check TAX Procedure in t.code: OBYZ  & see condition type for Secondary education cess is there   with all condition types and all are placed with a logic to calculate taxes with total price.
    Regards,
    Biju K

  • Pricing Condition not picking from Info record

    Dear Sapians
    We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
    What could be the problem?
    Warm Regards
    Sukumaran.E

    Hi Sukumaran,
    You need to go to PO -> item conditions -> press analysis button.
    double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX     111 Condition ignored (requirement 005 not fulfilled)"
    These descriptions will give clear hint on the reason of price not being picked up.
    - Sanjeev

  • Secodry Cess and Education Cess is not reflecting

    Dear SAP SD GURUS
    The following things are happening while processing j1iin for domestic orders
    Cenvat suspence account
    RG23A BED
    Secondry Cess
    Education Cess
    The following things are happening while processing j1iin for export orders
    Cenvat suspence account
    RG23A BED
    The remaining Secondry Cess and Education Cess is not getting reflected in the accounting and even the same has not been reflecting in the j1iin screen
    Kindly Guide me.
    Regards,
    Anand

    Hi,
    Reaz
    Thank You for the reply
    Not in J2iun. while processing J1iin after clicking FROM BILLING another screen appears with BILLING DOCUMENT,  POSTING DATE and SUBTRANSACTION TYPE after this screen appears we will press enter.  After pressing enter another screen appears, in that screen you can see the utilization button at extreme left of the screen or you can press (F6) for utilization.
    Regards
    Anand

  • Net price not picking from info record

    I am creating a new PO, but net price is not picking from info record. Info record is getting copied in the line item for PO, but net price is not copied. Due to that I am unable to create PO. If I manually enter price PO can be created. Could someone tell me what might be the reason Price is not automatically taken from Info Record. Please guide me what all I need to check.
    The same data is working in one cleint, and in another client this data is facing problem.
    Thanks
    Vineeth

    Hi
    1) If there is condition record exit in system,then while creating po system will take condition record
    2) If In inforecord last po number is exist for material and vendor ,then system will take this into consideration
    3) if your creating po first time for material and vendor ,and we have maintain purchasing inforecord for purchasing organization and for plant,then system will take it into consideration
    40 If none is available we have to put condition manually in po
    Regards
    Kailas ugale

  • Price was not picking from the Condition type for Item Category 'P'  in PO

    Hi Experts,
    I Created one condition type based on Material and WBS which price was fixed based on this
    I used the Purchase Order having Item <b>Category ‘P’ or ‘Q’</b> Price should pick from the condition type where I mapped the WBS Element and Material.
    The Net price was not picking from the Condition type Record.  Why? What should be the Problem?
    Whether my logic is correct or not?
    <u><b>
    The Scenario:</b></u> I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
    Please help on this.
    Thanks
    Muthukumar

    Hi,
    In standard configuration you cannot set item delivery date as a pricing data.
    Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
    IMG link:
    Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
    hope it helps.
    regards,
    wojciech

  • PO price is not picking from Inforecord

    Hello All,
    When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
    Thanks a lot in advance.
    Best regards,
    Raji

    Hi,
    1. Check out user profile whether EVO parameter is maintained properly for all the users.
    2. Check in EVO parameter key you set radio button on Always copy.
    EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
    Rewards, if helpful to you.
    rgds,
    rajesh

  • File Adapetr: File is not picking from File directory

    Hello,
    Issue: we are facing issue with file sender adapter like file is not picking from source file directory.
    Scenario: FTP1>PI>FTP2
    1. SAP PI sender communication channel will pick the file from FTP1 and process to PI file server (NFS)
    2. from PI file server (NFS), file will process again to FTP2
    So while picking the file, it shows following error:
    Could not process due to error: java.lang.IllegalStateException: Error during RETR epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 451 Transfer aborted. Broken pipe
    Conversion of file content to XML failed at position 0: sun.io.MalformedInputException
    Processing started
    this issue occur after we migrate the PI server from hpunix to aixunix.
    Best Regards,SARAN

    Hi,
    check the FCC parameters, fieldfixedlength option would be used when the exact length of field is constant in the Sender, In the FCC the fieldfixedlength parameter carries the length of the each.
    Check out Michal's blog on content conversion for all your doubts :The specified item was not found.
    Kindly check the below links for further assistance.
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
    regards,
    ganesh.

  • File is not picking from the source location.

    Hi all,
    File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
    Thanks to all.
    Korean

    Hi Majin,
      Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
    Thanks,
    Ranjeeth.

  • PO having Item Category u0091Pu0092 or u0091Qu0092  price not picking from Condition Record

    Hi Guru,
    Purchase order having Item Category ‘P’ or ‘Q’ Price should pick from the condition type.
    Where my condition type against on material and WBS based on this Price will be fixed. 
    Now I create the PO for same, which the price was not picking from the Condition Record.
    Please help on this.
    Thanks
    Muthukumar

    The condition record was created and is being picked up in the calculation.  Also, I am now testing with a material that does not have a PIR created, so the PIR does have an impact on my current results.
    My current test has results as follows:  condition P101 = Std. Cost (as expect) $100.00; ZUPP = calculated at 5% (as expected) $105.00.  However, the Net Price in the PO line item is showing only $100.00, not the $105.00.
    A look at table EKPO shows the following: Net Price  (NETPR) $100.00; Net Value (NETWR) $100.00 ; Gross Value (BRTWR) $105.00.
    Can you tell me what I am missing with this setup?

  • INCO TERMS NOT PICKING FROM INFORECORD

    Sir,
    With the help of Inforecord i am trying to create a PO
    Incoterms are not picked from Inforecord it is picked from Vendor master.
    How can i pull these setting
    regards
    amey

    Hi Amey,
    The Inco-term you have maintained in info-record will populate in the Inco-term field in Item - Delivery tab.
    If it is populated, it would have precedence over the header Inco-term.
    If helpful award points
    Regards,
    Vivek

  • Cost not picking from Inforecord

    Dear All,
    As per our costing strategy, cost should be pick up from  inforecord but strange part is that for one of the material the cost is not picking from inforrecord.
    The inforrecord is not marked for deletion, this material has only one valid inforecord which is active , this infrecord is not maintained in other plants, we don't maintain outline agreements.
    Am I missing anything on this?
    Quick responses are appreciated.
    Thanks,
    Ram

    Hi Rajneesh,
    Thanks for response.Our Valuation stratagey is as below.
    Planned Price 1
    Cost from Purchase inforecord
    Standard cost
    We did not update the planned price1 and  we have valid inforecord , still at the moment the cost is picking up from current standard cost.  Strange part this is not for all material , for some materials this strategy is working fine as per costing strategy. Even I compared these materials , everything is same.
    No clue for me, appreciate your reply.
    Thanks

  • Excise Secondary Education Cess is calculating Double in MIGO

    Hi All,
    Excise Secondary Education Cess is calculating Double in MIGO
    In PO it is showing SEcess is 3.20 Rs in Tax procedure  But while in Goods Receipt it is showing 6.40 Rs  ( Double )
    If it is posted in J1IEX it is taking 3.20 Rs
    Please help ,,,,,,
    Manjunath

    HI,
         Might be in your pricing procedure having same condition in 2 times check it once. otherwise u have entered the value  in 2 times in your purchase order.
    Edited by: anjali.p on Aug 22, 2011 1:36 PM

  • Sec edu cess is not picking miro

    Hi,
    When iam doing miro sec edu cess is not picking into account.
    what cud be the reason
    Regards,
    Robert

    hI
    ISSUE SOLVED AFTER APPLYING USER EXIT
    J_1I7_USEREXIT_DUTY_IN_EXPORT
    REGARDS
    RITHVIKA

  • Higer education cess is not flowing  to excise invoice.

    Hi All,
    Higer education cess is not flowing  to excise invoice.
    whats the note number need to be applied?
    Reg,
    Amol

    Check the below link,try to do the same setting which was suggested by Mr.Lakshmipathi.
    Higher Secondary Education Cess not flowing in Excise Invoice
    Ram

Maybe you are looking for

  • Report 6i rdf's and XML Publisher

    I'm trying to decide whether to implement Reports Developer 10g or XML Publishing as our reporting tool. Can I get some feedback from XML Publisher users who have also worked with the Oracle reporting tool Reports 6i? (I'm currently working with 6i)

  • Photoshop CS5.1 not seeing any Trade Gothic fonts

    I'm sorry if this question has been answered before, but I didnt seem to find it anywhere. I cannot use ANY Trade Gothic fonts within my Photoshop at all. I have tried on different accounts on my Mac Pro and they all are able to access it and change

  • Box and arrow bottom right corner, and the j, I can't find what they mean

    I'm new with Aperture and finally sorting my photos. I had a lot of duplicates for some reason. Image 100 and a 100-1 and sometimes a 100-2. I deleted the -1 and -2 copies. Some photos are displayed with a small box and arrow and some also with a J i

  • Unique constraint error but key when inserting unique keys!

    Hi, I am tring to update an existing database with some older data, I am getting an error which complains about a unique constraint being violated although there is no voilation evident after testing. I am puzzled by this and was wondering if someone

  • 11 GB Limitation in Solaris 8?

    I am new to Solaris. Noticed I cannot set up the OS to use all of my 43GB Maxtor drive, and only uses 11 GB. Is this a fundemental limitation? Can the rest of the disk be setup via the GUI? Any help or recommended patches (yes, I have looked) is grea